1 files changed, 67 insertions, 67 deletions
diff --git a/deploy/adapters/cobbler/snippets/post_s390_reboot b/deploy/adapters/cobbler/snippets/post_s390_reboot
index be99664f..fa33f06c 100644
--- a/deploy/adapters/cobbler/snippets/post_s390_reboot
+++ b/deploy/adapters/cobbler/snippets/post_s390_reboot
@@ -1,67 +1,67 @@
-## RHEL zVM installs do not properly reboot into the installed system.  This
-## issue has been resolved in RHEL-5 Update3.  To get a consistent reboot
-## behavior for s390* installs on all distros, this snippet can be used.  The
-## snippet will attempt to discover the IPL volume zipl is being installed
-## to and will attempt a reipl.  Be sure to set this snippet as the *last*
-## snippet your kickstart template.
-
-#if $arch.startswith("s390"):
-%post --nochroot
-
-# Does the kickstart file request a reboot?
-grep -q "^reboot" /tmp/ks.cfg /ks.cfg 2>/dev/null
-if [ \$? -ne 0 ]; then
-    exit 0
-fi
-
-# find out the location of /boot and use it to re-ipl
-boot_dev=""
-for mountpt in /mnt/sysimage/boot /mnt/sysimage;
-do
-  set -- \$(grep " \$mountpt " /proc/mounts)
-  if [ -b "\$1" ]; then
-    boot_dev=\$1
-    break
-  fi
-done
-
-# lookup dasd disk
-if [[ \$boot_dev == *dasd* ]]; then
-   # remove the '/dev/' (aka basename)
-   boot_dev=\${boot_dev\#\#/[^/]*/}
-   # strip partition number from dasd device
-   boot_dev=\${boot_dev%%[0-9]}
-   type="ccw"
-   id=`basename \$(readlink /sys/block/\$boot_dev/device)`
-
-   # HACK - In RHEL4 and RHEL3 ... we do it the hard way
-   grep -q "^[34]\$" /.buildstamp 2>/dev/null
-   if [ \$? -eq 0 ]; then
-      cat <<EOF> /mnt/sysimage/tmp/zeboot.sh
-\#!/bin/bash
-/sbin/modprobe -r vmcp
-rm -f "/dev/vmcp"
-sleep 2
-[ -b "/dev/vmcp" ] || /bin/mknod /dev/vmcp c 10 61
-/sbin/modprobe -a vmcp
-sync
-# Force a boot (e.g. IPL 0100)
-/sbin/vmcp ipl \${id\#\#*.}
-EOF
-      /bin/chmod +x /mnt/sysimage/tmp/zeboot.sh
-      /bin/chroot /mnt/sysimage /tmp/zeboot.sh
-   # In RHEL5 ... lets cleanly shutdown (Update 3 and newer)
-   else
-      echo \$type > /sys/firmware/reipl/reipl_type
-      echo \$id > /sys/firmware/reipl/\$type/device
-
-      # Force a reboot
-      pid=\$(cat /var/run/init.pid)
-      [ -z "\$pid" ] && pid=\$(pidof init)
-      kill -12 \$pid
-      pid=\$(cat /var/run/loader.run)
-      [ -z "\$pid" ] && pid=\$(pidof loader)
-      kill \$pid
-   fi
-fi
-#end if
+## RHEL zVM installs do not properly reboot into the installed system.  This
+## issue has been resolved in RHEL-5 Update3.  To get a consistent reboot
+## behavior for s390* installs on all distros, this snippet can be used.  The
+## snippet will attempt to discover the IPL volume zipl is being installed
+## to and will attempt a reipl.  Be sure to set this snippet as the *last*
+## snippet your kickstart template.
+
+#if $arch.startswith("s390"):
+%post --nochroot
+
+# Does the kickstart file request a reboot?
+grep -q "^reboot" /tmp/ks.cfg /ks.cfg 2>/dev/null
+if [ \$? -ne 0 ]; then
+    exit 0
+fi
+
+# find out the location of /boot and use it to re-ipl
+boot_dev=""
+for mountpt in /mnt/sysimage/boot /mnt/sysimage;
+do
+  set -- \$(grep " \$mountpt " /proc/mounts)
+  if [ -b "\$1" ]; then
+    boot_dev=\$1
+    break
+  fi
+done
+
+# lookup dasd disk
+if [[ \$boot_dev == *dasd* ]]; then
+   # remove the '/dev/' (aka basename)
+   boot_dev=\${boot_dev\#\#/[^/]*/}
+   # strip partition number from dasd device
+   boot_dev=\${boot_dev%%[0-9]}
+   type="ccw"
+   id=`basename \$(readlink /sys/block/\$boot_dev/device)`
+
+   # HACK - In RHEL4 and RHEL3 ... we do it the hard way
+   grep -q "^[34]\$" /.buildstamp 2>/dev/null
+   if [ \$? -eq 0 ]; then
+      cat <<EOF> /mnt/sysimage/tmp/zeboot.sh
+\#!/bin/bash
+/sbin/modprobe -r vmcp
+rm -f "/dev/vmcp"
+sleep 2
+[ -b "/dev/vmcp" ] || /bin/mknod /dev/vmcp c 10 61
+/sbin/modprobe -a vmcp
+sync
+# Force a boot (e.g. IPL 0100)
+/sbin/vmcp ipl \${id\#\#*.}
+EOF
+      /bin/chmod +x /mnt/sysimage/tmp/zeboot.sh
+      /bin/chroot /mnt/sysimage /tmp/zeboot.sh
+   # In RHEL5 ... lets cleanly shutdown (Update 3 and newer)
+   else
+      echo \$type > /sys/firmware/reipl/reipl_type
+      echo \$id > /sys/firmware/reipl/\$type/device
+
+      # Force a reboot
+      pid=\$(cat /var/run/init.pid)
+      [ -z "\$pid" ] && pid=\$(pidof init)
+      kill -12 \$pid
+      pid=\$(cat /var/run/loader.run)
+      [ -z "\$pid" ] && pid=\$(pidof loader)
+      kill \$pid
+   fi
+fi
+#end if