summaryrefslogtreecommitdiffstats
path: root/deploy/adapters/ansible/roles/setup-openvswitch/templates
diff options
context:
space:
mode:
Diffstat (limited to 'deploy/adapters/ansible/roles/setup-openvswitch/templates')
-rwxr-xr-xdeploy/adapters/ansible/roles/setup-openvswitch/templates/controller.j288
1 files changed, 88 insertions, 0 deletions
diff --git a/deploy/adapters/ansible/roles/setup-openvswitch/templates/controller.j2 b/deploy/adapters/ansible/roles/setup-openvswitch/templates/controller.j2
new file mode 100755
index 00000000..f7b9756b
--- /dev/null
+++ b/deploy/adapters/ansible/roles/setup-openvswitch/templates/controller.j2
@@ -0,0 +1,88 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# Physical interface
+auto eth0
+iface eth0 inet manual
+
+# external interface
+{% set intf_external = contr_sys_mappings["external"]["interface"] %}
+{% if contr_sys_mappings["external"]["vlan_tag"] | int %}
+{% set intf_external = intf_external + '.' + contr_sys_mappings["external"]["vlan_tag"]|string %}
+{% endif %}
+auto {{ intf_external }}
+iface {{ intf_external }} inet manual
+{% if contr_sys_mappings["external"]["vlan_tag"] | int %}
+ vlan-raw-device {{ intf_external }}
+{% endif %}
+
+# tenant interface
+{% set intf_tenant = contr_sys_mappings["tenant"]["interface"] %}
+{% if contr_sys_mappings["tenant"]["vlan_tag"] | int %}
+{% set intf_tenant = intf_tenant + '.' + contr_sys_mappings["tenant"]["vlan_tag"]|string %}
+{% endif %}
+auto {{ intf_tenant }}
+iface {{ intf_tenant }} inet static
+{% if contr_sys_mappings["tenant"]["vlan_tag"] | int %}
+ vlan-raw-device {{ intf_tenant }}
+{% endif %}
+
+# storage interface
+{% set intf_storage = contr_sys_mappings["storage"]["interface"] %}
+{% if contr_sys_mappings["storage"]["vlan_tag"] | int %}
+{% set intf_storage = intf_storage + '.' + contr_sys_mappings["storage"]["vlan_tag"]|string %}
+{% endif %}
+auto {{ intf_storage }}
+iface {{ intf_storage }} inet manual
+{% if contr_sys_mappings["storage"]["vlan_tag"] | int %}
+ vlan-raw-device {{ intf_storage }}
+{% endif %}
+
+# Container/Host management bridge
+auto br-mgmt
+iface br-mgmt inet static
+ bridge_stp off
+ bridge_waitport 0
+ bridge_fd 0
+ bridge_ports eth0
+ address {{ ip_settings[inventory_hostname]["mgmt"]["ip"] }}
+ netmask 255.255.255.0
+
+# OpenStack Networking VLAN bridge
+auto br-provider
+iface br-provider inet static
+ address {{ ip_settings[inventory_hostname]["external"]["ip"] }}
+ netmask 255.255.255.0
+ gateway {{ ip_settings[inventory_hostname]["external"]["gw"] }}
+ pre-up ifconfig br-external down || true
+ pre-up brctl delbr br-external || true
+
+# OpenStack Networking VXLAN (tunnel/overlay) bridge
+#
+# Only the COMPUTE and NETWORK nodes must have an IP address
+# on this bridge. When used by infrastructure nodes, the
+# IP addresses are assigned to containers which use this
+# bridge.
+#
+auto br-tenant
+iface br-tenant inet static
+ bridge_stp off
+ bridge_waitport 0
+ bridge_fd 0
+ bridge_ports {{ intf_tenant }}
+ address {{ ip_settings[inventory_hostname]["tenant"]["ip"] }}
+ netmask 255.255.255.0
+
+# Storage bridge
+auto br-storage
+iface br-storage inet static
+ bridge_stp off
+ bridge_waitport 0
+ bridge_fd 0
+ bridge_ports {{ intf_storage }}
+ address {{ ip_settings[inventory_hostname]["storage"]["ip"] }}
+ netmask 255.255.255.0