diff options
Diffstat (limited to 'deploy/adapters/ansible/roles/config-compute/templates/compute.j2')
| -rw-r--r-- | deploy/adapters/ansible/roles/config-compute/templates/compute.j2 | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/deploy/adapters/ansible/roles/config-compute/templates/compute.j2 b/deploy/adapters/ansible/roles/config-compute/templates/compute.j2 new file mode 100644 index 00000000..8337fbcb --- /dev/null +++ b/deploy/adapters/ansible/roles/config-compute/templates/compute.j2 @@ -0,0 +1,81 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +# The loopback network interface +auto lo +iface lo inet loopback + + +# Physical interface +auto eth0 +iface eth0 inet manual + + +# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface +auto {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}} +iface {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}} inet manual + vlan-raw-device {{sys_intf_mappings["mgmt"]["interface"]}} + +# Storage network VLAN interface (optional) +auto {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}} +iface {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}} inet manual + vlan-raw-device {{sys_intf_mappings["storage"]["interface"]}} + +# Container/Host management bridge +auto br-mgmt +iface br-mgmt inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports eth0 + address {{host_info[inventory_hostname].MGMT_IP}} + netmask 255.255.255.0 + +# compute1 VXLAN (tunnel/overlay) bridge config +auto br-vxlan +iface br-vxlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}} + address {{host_info[inventory_hostname].VXLAN_IP}} + netmask 255.255.252.0 + +# OpenStack Networking VLAN bridge +auto br-vlan +iface br-vlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports {{ network_cfg["provider_net_mappings"][0]["interface"] }} + address {{ip_settings[inventory_hostname]["br-prv"]["ip"]}} + netmask 255.255.255.0 + gateway {{ip_settings[inventory_hostname]["br-prv"]["gw"]}} + offload-sg off + # Create veth pair, don't bomb if already exists + pre-up ip link add br-vlan-veth type veth peer name eth12 || true + # Set both ends UP + pre-up ip link set br-vlan-veth up + pre-up ip link set eth12 up + # Delete veth pair on DOWN + post-down ip link del br-vlan-veth || true + bridge_ports br-vlan-veth + +# Add an additional address to br-vlan +iface br-vlan inet static + # Flat network default gateway + # -- This needs to exist somewhere for network reachability + # -- from the router namespace for floating IP paths. + # -- Putting this here is primarily for tempest to work. + address {{host_info[inventory_hostname].VLAN_IP_SECOND}} + netmask 255.255.252.0 + +# compute1 Storage bridge +auto br-storage +iface br-storage inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}} + address {{ip_settings[inventory_hostname]["storage"]["ip"]}} + netmask 255.255.252.0 |