diff options
Diffstat (limited to 'deploy/adapters/ansible/openstack_juno/templates')
5 files changed, 0 insertions, 1120 deletions
diff --git a/deploy/adapters/ansible/openstack_juno/templates/dnsmasq-neutron.conf b/deploy/adapters/ansible/openstack_juno/templates/dnsmasq-neutron.conf deleted file mode 100644 index 7bcbd9df..00000000 --- a/deploy/adapters/ansible/openstack_juno/templates/dnsmasq-neutron.conf +++ /dev/null @@ -1,2 +0,0 @@ -dhcp-option-force=26,1454 - diff --git a/deploy/adapters/ansible/openstack_juno/templates/ml2_conf.ini b/deploy/adapters/ansible/openstack_juno/templates/ml2_conf.ini deleted file mode 100644 index 7b3e76da..00000000 --- a/deploy/adapters/ansible/openstack_juno/templates/ml2_conf.ini +++ /dev/null @@ -1,113 +0,0 @@ -[ml2] -# (ListOpt) List of network type driver entrypoints to be loaded from -# the neutron.ml2.type_drivers namespace. -# -# type_drivers = local,flat,vlan,gre,vxlan -# Example: type_drivers = flat,vlan,gre,vxlan -type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }} - -# (ListOpt) Ordered list of network_types to allocate as tenant -# networks. The default value 'local' is useful for single-box testing -# but provides no connectivity between hosts. -# -# tenant_network_types = local -# Example: tenant_network_types = vlan,gre,vxlan -tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} - -# (ListOpt) Ordered list of networking mechanism driver entrypoints -# to be loaded from the neutron.ml2.mechanism_drivers namespace. -# mechanism_drivers = -# Example: mechanism_drivers = openvswitch,mlnx -# Example: mechanism_drivers = arista -# Example: mechanism_drivers = cisco,logger -# Example: mechanism_drivers = openvswitch,brocade -# Example: mechanism_drivers = linuxbridge,brocade -mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }} - -[ml2_type_flat] -# (ListOpt) List of physical_network names with which flat networks -# can be created. Use * to allow flat networks with arbitrary -# physical_network names. -# -flat_networks = * -# Example:flat_networks = physnet1,physnet2 -# Example:flat_networks = * - -[ml2_type_vlan] -# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples -# specifying physical_network names usable for VLAN provider and -# tenant networks, as well as ranges of VLAN tags on each -# physical_network available for allocation as tenant networks. -# -network_vlan_ranges = {{ NEUTRON_VLAN_RANGES|join(",") }} -# Example: network_vlan_ranges = physnet1:1000:2999,physnet2 - -[ml2_type_gre] -# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation -tunnel_id_ranges = 1:1000 - -[ml2_type_vxlan] -# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating -# ranges of VXLAN VNI IDs that are available for tenant network allocation. -# -vni_ranges = 1001:4095 - -# (StrOpt) Multicast group for the VXLAN interface. When configured, will -# enable sending all broadcast traffic to this multicast group. When left -# unconfigured, will disable multicast VXLAN mode. -# -vxlan_group = 239.1.1.1 -# Example: vxlan_group = 239.1.1.1 - -[securitygroup] -# Controls if neutron security group is enabled or not. -# It should be false when you use nova security group. -# enable_security_group = True -firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver -enable_security_group = True - -[database] -connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8 - -[ovs] -local_ip = {{ internal_ip }} -{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %} -integration_bridge = br-int -{% if NEUTRON_TUNNEL_TYPES %} -tunnel_bridge = br-tun -tunnel_id_ranges = 1001:4095 -tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }} -{% endif %} -bridge_mappings = {{ NEUTRON_OVS_BRIDGE_MAPPINGS | join(",") }} -{% endif %} - -[agent] -root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf -tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }} -{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %} -vxlan_udp_port = 4789 -{% endif %} -l2_population = False - -[odl] -{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} -network_vlan_ranges = 1001:4095 -{% if NEUTRON_TUNNEL_TYPES %} -tunnel_id_ranges = 1001:4095 -tun_peer_patch_port = patch-int -int_peer_patch_port = patch-tun -tunnel_bridge = br-tun -{% endif %} - -tenant_network_type = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} -integration_bridge = br-int -controllers = 10.1.0.15:8080:admin:admin -{% endif %} - -[ml2_odl] -{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} -username = {{ odl_username }} -password = {{ odl_password }} -url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron -{% endif %} - diff --git a/deploy/adapters/ansible/openstack_juno/templates/neutron-network.conf b/deploy/adapters/ansible/openstack_juno/templates/neutron-network.conf deleted file mode 100644 index 63ac27ee..00000000 --- a/deploy/adapters/ansible/openstack_juno/templates/neutron-network.conf +++ /dev/null @@ -1,465 +0,0 @@ -[DEFAULT] -# Print more verbose output (set logging level to INFO instead of default WARNING level). -verbose = {{ VERBOSE }} - -# Print debugging output (set logging level to DEBUG instead of default WARNING level). -debug = {{ DEBUG }} - -# Where to store Neutron state files. This directory must be writable by the -# user executing the agent. -state_path = /var/lib/neutron - -# Where to store lock files -lock_path = $state_path/lock - -# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s -# log_date_format = %Y-%m-%d %H:%M:%S - -# use_syslog -> syslog -# log_file and log_dir -> log_dir/log_file -# (not log_file) and log_dir -> log_dir/{binary_name}.log -# use_stderr -> stderr -# (not user_stderr) and (not log_file) -> stdout -# publish_errors -> notification system - -# use_syslog = False -# syslog_log_facility = LOG_USER - -# use_stderr = True -# log_file = -log_dir = /var/log/neutron - -# publish_errors = False - -# Address to bind the API server to -bind_host = {{ network_server_host }} - -# Port the bind the API server to -bind_port = 9696 - -# Path to the extensions. Note that this can be a colon-separated list of -# paths. For example: -# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions -# The __path__ of neutron.extensions is appended to this, so if your -# extensions are in there you don't need to specify them here -# api_extensions_path = - -# (StrOpt) Neutron core plugin entrypoint to be loaded from the -# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the -# plugins included in the neutron source distribution. For compatibility with -# previous versions, the class name of a plugin can be specified instead of its -# entrypoint name. -# -#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin -core_plugin = ml2 -# Example: core_plugin = ml2 - -# (ListOpt) List of service plugin entrypoints to be loaded from the -# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of -# the plugins included in the neutron source distribution. For compatibility -# with previous versions, the class name of a plugin can be specified instead -# of its entrypoint name. -# -# service_plugins = -# Example: service_plugins = router,firewall,lbaas,vpnaas,metering -service_plugins = router - -# Paste configuration file -api_paste_config = api-paste.ini - -# The strategy to be used for auth. -# Supported values are 'keystone'(default), 'noauth'. -auth_strategy = keystone - -# Base MAC address. The first 3 octets will remain unchanged. If the -# 4h octet is not 00, it will also be used. The others will be -# randomly generated. -# 3 octet -# base_mac = fa:16:3e:00:00:00 -# 4 octet -# base_mac = fa:16:3e:4f:00:00 - -# Maximum amount of retries to generate a unique MAC address -# mac_generation_retries = 16 - -# DHCP Lease duration (in seconds) -dhcp_lease_duration = 86400 - -# Allow sending resource operation notification to DHCP agent -# dhcp_agent_notification = True - -# Enable or disable bulk create/update/delete operations -# allow_bulk = True -# Enable or disable pagination -# allow_pagination = False -# Enable or disable sorting -# allow_sorting = False -# Enable or disable overlapping IPs for subnets -# Attention: the following parameter MUST be set to False if Neutron is -# being used in conjunction with nova security groups -allow_overlapping_ips = True -# Ensure that configured gateway is on subnet -# force_gateway_on_subnet = False - - -# RPC configuration options. Defined in rpc __init__ -# The messaging module to use, defaults to kombu. -# rpc_backend = neutron.openstack.common.rpc.impl_kombu -rpc_backend = rabbit -rabbit_host = {{ rabbit_host }} -rabbit_password = {{ RABBIT_PASS }} - -# Size of RPC thread pool -rpc_thread_pool_size = 240 -# Size of RPC connection pool -rpc_conn_pool_size = 100 -# Seconds to wait for a response from call or multicall -rpc_response_timeout = 300 -# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. -rpc_cast_timeout = 300 -# Modules of exceptions that are permitted to be recreated -# upon receiving exception data from an rpc call. -# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception -# AMQP exchange to connect to if using RabbitMQ or QPID -# control_exchange = neutron - -# If passed, use a fake RabbitMQ provider -# fake_rabbit = False - -# Configuration options if sending notifications via kombu rpc (these are -# the defaults) -# SSL version to use (valid only if SSL enabled) -# kombu_ssl_version = -# SSL key file (valid only if SSL enabled) -# kombu_ssl_keyfile = -# SSL cert file (valid only if SSL enabled) -# kombu_ssl_certfile = -# SSL certification authority file (valid only if SSL enabled) -# kombu_ssl_ca_certs = -# Port where RabbitMQ server is running/listening -rabbit_port = 5672 -# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) -# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' -# rabbit_hosts = localhost:5672 -# User ID used for RabbitMQ connections -rabbit_userid = {{ RABBIT_USER }} -# Location of a virtual RabbitMQ installation. -# rabbit_virtual_host = / -# Maximum retries with trying to connect to RabbitMQ -# (the default of 0 implies an infinite retry count) -# rabbit_max_retries = 0 -# RabbitMQ connection retry interval -# rabbit_retry_interval = 1 -# Use HA queues in RabbitMQ (x-ha-policy: all). You need to -# wipe RabbitMQ database when changing this option. (boolean value) -# rabbit_ha_queues = false -# QPID -# rpc_backend=neutron.openstack.common.rpc.impl_qpid -# Qpid broker hostname -# qpid_hostname = localhost -# Qpid broker port -# qpid_port = 5672 -# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) -# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' -# qpid_hosts = localhost:5672 -# Username for qpid connection -# qpid_username = '' -# Password for qpid connection -# qpid_password = '' -# Space separated list of SASL mechanisms to use for auth -# qpid_sasl_mechanisms = '' -# Seconds between connection keepalive heartbeats -# qpid_heartbeat = 60 -# Transport to use, either 'tcp' or 'ssl' -# qpid_protocol = tcp -# Disable Nagle algorithm -# qpid_tcp_nodelay = True - -# ZMQ -# rpc_backend=neutron.openstack.common.rpc.impl_zmq -# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. -# The "host" option should point or resolve to this address. -# rpc_zmq_bind_address = * - -# ============ Notification System Options ===================== - -# Notifications can be sent when network/subnet/port are created, updated or deleted. -# There are three methods of sending notifications: logging (via the -# log_file directive), rpc (via a message queue) and -# noop (no notifications sent, the default) - -# Notification_driver can be defined multiple times -# Do nothing driver -# notification_driver = neutron.openstack.common.notifier.no_op_notifier -# Logging driver -# notification_driver = neutron.openstack.common.notifier.log_notifier -# RPC driver. -notification_driver = neutron.openstack.common.notifier.rpc_notifier - -# default_notification_level is used to form actual topic name(s) or to set logging level -default_notification_level = INFO - -# default_publisher_id is a part of the notification payload -# host = myhost.com -# default_publisher_id = $host - -# Defined in rpc_notifier, can be comma separated values. -# The actual topic names will be %s.%(default_notification_level)s -notification_topics = notifications - -# Default maximum number of items returned in a single response, -# value == infinite and value < 0 means no max limit, and value must -# be greater than 0. If the number of items requested is greater than -# pagination_max_limit, server will just return pagination_max_limit -# of number of items. -# pagination_max_limit = -1 - -# Maximum number of DNS nameservers per subnet -# max_dns_nameservers = 5 - -# Maximum number of host routes per subnet -# max_subnet_host_routes = 20 - -# Maximum number of fixed ips per port -# max_fixed_ips_per_port = 5 - -# =========== items for agent management extension ============= -# Seconds to regard the agent as down; should be at least twice -# report_interval, to be sure the agent is down for good -agent_down_time = 75 -# =========== end of items for agent management extension ===== - -# =========== items for agent scheduler extension ============= -# Driver to use for scheduling network to DHCP agent -network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler -# Driver to use for scheduling router to a default L3 agent -router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler -# Driver to use for scheduling a loadbalancer pool to an lbaas agent -# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler - -# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted -# networks to first DHCP agent which sends get_active_networks message to -# neutron server -# network_auto_schedule = True - -# Allow auto scheduling routers to L3 agent. It will schedule non-hosted -# routers to first L3 agent which sends sync_routers message to neutron server -# router_auto_schedule = True - -# Number of DHCP agents scheduled to host a network. This enables redundant -# DHCP agents for configured networks. -# dhcp_agents_per_network = 1 - -# =========== end of items for agent scheduler extension ===== - -# =========== WSGI parameters related to the API server ============== -# Number of separate worker processes to spawn. The default, 0, runs the -# worker thread in the current process. Greater than 0 launches that number of -# child processes as workers. The parent process manages them. -api_workers = 8 - -# Number of separate RPC worker processes to spawn. The default, 0, runs the -# worker thread in the current process. Greater than 0 launches that number of -# child processes as RPC workers. The parent process manages them. -# This feature is experimental until issues are addressed and testing has been -# enabled for various plugins for compatibility. -rpc_workers = 8 - -# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when -# starting API server. Not supported on OS X. -# tcp_keepidle = 600 - -# Number of seconds to keep retrying to listen -# retry_until_window = 30 - -# Number of backlog requests to configure the socket with. -# backlog = 4096 - -# Max header line to accommodate large tokens -# max_header_line = 16384 - -# Enable SSL on the API server -# use_ssl = False - -# Certificate file to use when starting API server securely -# ssl_cert_file = /path/to/certfile - -# Private key file to use when starting API server securely -# ssl_key_file = /path/to/keyfile - -# CA certificate file to use when starting API server securely to -# verify connecting clients. This is an optional parameter only required if -# API clients need to authenticate to the API server using SSL certificates -# signed by a trusted CA -# ssl_ca_file = /path/to/cafile -# ======== end of WSGI parameters related to the API server ========== - - -# ======== neutron nova interactions ========== -# Send notification to nova when port status is active. -notify_nova_on_port_status_changes = True - -# Send notifications to nova when port data (fixed_ips/floatingips) change -# so nova can update it's cache. -notify_nova_on_port_data_changes = True - -# URL for connection to nova (Only supports one nova region currently). -nova_url = http://{{ internal_vip.ip }}:8774/v2 - -# Name of nova region to use. Useful if keystone manages more than one region -nova_region_name = regionOne - -# Username for connection to nova in admin context -nova_admin_username = nova - -# The uuid of the admin nova tenant - -# Password for connection to nova in admin context. -nova_admin_password = {{ NOVA_PASS }} - -# Authorization URL for connection to nova in admin context. -nova_admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0 - -# Number of seconds between sending events to nova if there are any events to send -send_events_interval = 2 - -# ======== end of neutron nova interactions ========== - -[quotas] -# Default driver to use for quota checks -quota_driver = neutron.db.quota_db.DbQuotaDriver - -# Resource name(s) that are supported in quota features -quota_items = network,subnet,port - -# Default number of resource allowed per tenant. A negative value means -# unlimited. -default_quota = -1 - -# Number of networks allowed per tenant. A negative value means unlimited. -quota_network = 100 - -# Number of subnets allowed per tenant. A negative value means unlimited. -quota_subnet = 100 - -# Number of ports allowed per tenant. A negative value means unlimited. -quota_port = 8000 - -# Number of security groups allowed per tenant. A negative value means -# unlimited. -quota_security_group = 1000 - -# Number of security group rules allowed per tenant. A negative value means -# unlimited. -quota_security_group_rule = 1000 - -# Number of vips allowed per tenant. A negative value means unlimited. -# quota_vip = 10 - -# Number of pools allowed per tenant. A negative value means unlimited. -# quota_pool = 10 - -# Number of pool members allowed per tenant. A negative value means unlimited. -# The default is unlimited because a member is not a real resource consumer -# on Openstack. However, on back-end, a member is a resource consumer -# and that is the reason why quota is possible. -# quota_member = -1 - -# Number of health monitors allowed per tenant. A negative value means -# unlimited. -# The default is unlimited because a health monitor is not a real resource -# consumer on Openstack. However, on back-end, a member is a resource consumer -# and that is the reason why quota is possible. -# quota_health_monitors = -1 - -# Number of routers allowed per tenant. A negative value means unlimited. -# quota_router = 10 - -# Number of floating IPs allowed per tenant. A negative value means unlimited. -# quota_floatingip = 50 - -[agent] -# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real -# root filter facility. -# Change to "sudo" to skip the filtering and just run the comand directly -root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" - -# =========== items for agent management extension ============= -# seconds between nodes reporting state to server; should be less than -# agent_down_time, best if it is half or less than agent_down_time -report_interval = 30 - -# =========== end of items for agent management extension ===== - -[keystone_authtoken] -auth_uri = http://{{ internal_vip.ip }}:5000/v2.0 -identity_uri = http://{{ internal_vip.ip }}:35357 -admin_tenant_name = service -admin_user = neutron -admin_password = {{ NEUTRON_PASS }} -signing_dir = $state_path/keystone-signing - -[database] -# This line MUST be changed to actually run the plugin. -# Example: -# connection = mysql://root:pass@127.0.0.1:3306/neutron -# Replace 127.0.0.1 above with the IP address of the database used by the -# main neutron server. (Leave it as is if the database runs on this host.) -# connection = sqlite:////var/lib/neutron/neutron.sqlite -#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron - -# The SQLAlchemy connection string used to connect to the slave database -slave_connection = - -# Database reconnection retry times - in event connectivity is lost -# set to -1 implies an infinite retry count -max_retries = 10 - -# Database reconnection interval in seconds - if the initial connection to the -# database fails -retry_interval = 10 - -# Minimum number of SQL connections to keep open in a pool -min_pool_size = 1 - -# Maximum number of SQL connections to keep open in a pool -max_pool_size = 100 - -# Timeout in seconds before idle sql connections are reaped -idle_timeout = 3600 - -# If set, use this value for max_overflow with sqlalchemy -max_overflow = 100 - -# Verbosity of SQL debugging information. 0=None, 100=Everything -connection_debug = 0 - -# Add python stack traces to SQL as comment strings -connection_trace = False - -# If set, use this value for pool_timeout with sqlalchemy -pool_timeout = 10 - -[service_providers] -# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. -# Must be in form: -# service_provider=<service_type>:<name>:<driver>[:default] -# List of allowed service types includes LOADBALANCER, FIREWALL, VPN -# Combination of <service type> and <name> must be unique; <driver> must also be unique -# This is multiline option, example for default provider: -# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default -# example of non-default provider: -# service_provider=FIREWALL:name2:firewall_driver_path -# --- Reference implementations --- -service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default -service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default -# In order to activate Radware's lbaas driver you need to uncomment the next line. -# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. -# Otherwise comment the HA Proxy line -# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default -# uncomment the following line to make the 'netscaler' LBaaS provider available. -# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver -# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. -# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default -# Uncomment the line below to use Embrane heleos as Load Balancer service provider. -# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/deploy/adapters/ansible/openstack_juno/templates/neutron.conf b/deploy/adapters/ansible/openstack_juno/templates/neutron.conf deleted file mode 100644 index 8a5e76ee..00000000 --- a/deploy/adapters/ansible/openstack_juno/templates/neutron.conf +++ /dev/null @@ -1,466 +0,0 @@ -[DEFAULT] -# Print more verbose output (set logging level to INFO instead of default WARNING level). -verbose = {{ VERBOSE }} - -# Print debugging output (set logging level to DEBUG instead of default WARNING level). -debug = {{ VERBOSE }} - -# Where to store Neutron state files. This directory must be writable by the -# user executing the agent. -state_path = /var/lib/neutron - -# Where to store lock files -lock_path = $state_path/lock - -# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s -# log_date_format = %Y-%m-%d %H:%M:%S - -# use_syslog -> syslog -# log_file and log_dir -> log_dir/log_file -# (not log_file) and log_dir -> log_dir/{binary_name}.log -# use_stderr -> stderr -# (not user_stderr) and (not log_file) -> stdout -# publish_errors -> notification system - -# use_syslog = False -# syslog_log_facility = LOG_USER - -# use_stderr = True -# log_file = -log_dir = /var/log/neutron - -# publish_errors = False - -# Address to bind the API server to -bind_host = {{ network_server_host }} - -# Port the bind the API server to -bind_port = 9696 - -# Path to the extensions. Note that this can be a colon-separated list of -# paths. For example: -# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions -# The __path__ of neutron.extensions is appended to this, so if your -# extensions are in there you don't need to specify them here -# api_extensions_path = - -# (StrOpt) Neutron core plugin entrypoint to be loaded from the -# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the -# plugins included in the neutron source distribution. For compatibility with -# previous versions, the class name of a plugin can be specified instead of its -# entrypoint name. -# -#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin -core_plugin = ml2 -# Example: core_plugin = ml2 - -# (ListOpt) List of service plugin entrypoints to be loaded from the -# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of -# the plugins included in the neutron source distribution. For compatibility -# with previous versions, the class name of a plugin can be specified instead -# of its entrypoint name. -# -# service_plugins = -# Example: service_plugins = router,firewall,lbaas,vpnaas,metering -service_plugins = router - -# Paste configuration file -api_paste_config = api-paste.ini - -# The strategy to be used for auth. -# Supported values are 'keystone'(default), 'noauth'. -auth_strategy = keystone - -# Base MAC address. The first 3 octets will remain unchanged. If the -# 4h octet is not 00, it will also be used. The others will be -# randomly generated. -# 3 octet -# base_mac = fa:16:3e:00:00:00 -# 4 octet -# base_mac = fa:16:3e:4f:00:00 - -# Maximum amount of retries to generate a unique MAC address -# mac_generation_retries = 16 - -# DHCP Lease duration (in seconds) -dhcp_lease_duration = 86400 - -# Allow sending resource operation notification to DHCP agent -# dhcp_agent_notification = True - -# Enable or disable bulk create/update/delete operations -# allow_bulk = True -# Enable or disable pagination -# allow_pagination = False -# Enable or disable sorting -# allow_sorting = False -# Enable or disable overlapping IPs for subnets -# Attention: the following parameter MUST be set to False if Neutron is -# being used in conjunction with nova security groups -allow_overlapping_ips = True -# Ensure that configured gateway is on subnet -# force_gateway_on_subnet = False - - -# RPC configuration options. Defined in rpc __init__ -# The messaging module to use, defaults to kombu. -# rpc_backend = neutron.openstack.common.rpc.impl_kombu -rpc_backend = rabbit -rabbit_host = {{ rabbit_host }} -rabbit_password = {{ RABBIT_PASS }} - -# Size of RPC thread pool -rpc_thread_pool_size = 240 -# Size of RPC connection pool -rpc_conn_pool_size = 100 -# Seconds to wait for a response from call or multicall -rpc_response_timeout = 300 -# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. -rpc_cast_timeout = 300 -# Modules of exceptions that are permitted to be recreated -# upon receiving exception data from an rpc call. -# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception -# AMQP exchange to connect to if using RabbitMQ or QPID -# control_exchange = neutron - -# If passed, use a fake RabbitMQ provider -# fake_rabbit = False - -# Configuration options if sending notifications via kombu rpc (these are -# the defaults) -# SSL version to use (valid only if SSL enabled) -# kombu_ssl_version = -# SSL key file (valid only if SSL enabled) -# kombu_ssl_keyfile = -# SSL cert file (valid only if SSL enabled) -# kombu_ssl_certfile = -# SSL certification authority file (valid only if SSL enabled) -# kombu_ssl_ca_certs = -# Port where RabbitMQ server is running/listening -rabbit_port = 5672 -# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) -# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' -# rabbit_hosts = localhost:5672 -# User ID used for RabbitMQ connections -rabbit_userid = {{ RABBIT_USER }} -# Location of a virtual RabbitMQ installation. -# rabbit_virtual_host = / -# Maximum retries with trying to connect to RabbitMQ -# (the default of 0 implies an infinite retry count) -# rabbit_max_retries = 0 -# RabbitMQ connection retry interval -# rabbit_retry_interval = 1 -# Use HA queues in RabbitMQ (x-ha-policy: all). You need to -# wipe RabbitMQ database when changing this option. (boolean value) -# rabbit_ha_queues = false -# QPID -# rpc_backend=neutron.openstack.common.rpc.impl_qpid -# Qpid broker hostname -# qpid_hostname = localhost -# Qpid broker port -# qpid_port = 5672 -# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) -# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' -# qpid_hosts = localhost:5672 -# Username for qpid connection -# qpid_username = '' -# Password for qpid connection -# qpid_password = '' -# Space separated list of SASL mechanisms to use for auth -# qpid_sasl_mechanisms = '' -# Seconds between connection keepalive heartbeats -# qpid_heartbeat = 60 -# Transport to use, either 'tcp' or 'ssl' -# qpid_protocol = tcp -# Disable Nagle algorithm -# qpid_tcp_nodelay = True - -# ZMQ -# rpc_backend=neutron.openstack.common.rpc.impl_zmq -# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. -# The "host" option should point or resolve to this address. -# rpc_zmq_bind_address = * - -# ============ Notification System Options ===================== - -# Notifications can be sent when network/subnet/port are created, updated or deleted. -# There are three methods of sending notifications: logging (via the -# log_file directive), rpc (via a message queue) and -# noop (no notifications sent, the default) - -# Notification_driver can be defined multiple times -# Do nothing driver -# notification_driver = neutron.openstack.common.notifier.no_op_notifier -# Logging driver -# notification_driver = neutron.openstack.common.notifier.log_notifier -# RPC driver. -notification_driver = neutron.openstack.common.notifier.rpc_notifier - -# default_notification_level is used to form actual topic name(s) or to set logging level -default_notification_level = INFO - -# default_publisher_id is a part of the notification payload -# host = myhost.com -# default_publisher_id = $host - -# Defined in rpc_notifier, can be comma separated values. -# The actual topic names will be %s.%(default_notification_level)s -notification_topics = notifications - -# Default maximum number of items returned in a single response, -# value == infinite and value < 0 means no max limit, and value must -# be greater than 0. If the number of items requested is greater than -# pagination_max_limit, server will just return pagination_max_limit -# of number of items. -# pagination_max_limit = -1 - -# Maximum number of DNS nameservers per subnet -# max_dns_nameservers = 5 - -# Maximum number of host routes per subnet -# max_subnet_host_routes = 20 - -# Maximum number of fixed ips per port -# max_fixed_ips_per_port = 5 - -# =========== items for agent management extension ============= -# Seconds to regard the agent as down; should be at least twice -# report_interval, to be sure the agent is down for good -agent_down_time = 75 -# =========== end of items for agent management extension ===== - -# =========== items for agent scheduler extension ============= -# Driver to use for scheduling network to DHCP agent -network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler -# Driver to use for scheduling router to a default L3 agent -router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler -# Driver to use for scheduling a loadbalancer pool to an lbaas agent -# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler - -# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted -# networks to first DHCP agent which sends get_active_networks message to -# neutron server -# network_auto_schedule = True - -# Allow auto scheduling routers to L3 agent. It will schedule non-hosted -# routers to first L3 agent which sends sync_routers message to neutron server -# router_auto_schedule = True - -# Number of DHCP agents scheduled to host a network. This enables redundant -# DHCP agents for configured networks. -# dhcp_agents_per_network = 1 - -# =========== end of items for agent scheduler extension ===== - -# =========== WSGI parameters related to the API server ============== -# Number of separate worker processes to spawn. The default, 0, runs the -# worker thread in the current process. Greater than 0 launches that number of -# child processes as workers. The parent process manages them. -api_workers = 8 - -# Number of separate RPC worker processes to spawn. The default, 0, runs the -# worker thread in the current process. Greater than 0 launches that number of -# child processes as RPC workers. The parent process manages them. -# This feature is experimental until issues are addressed and testing has been -# enabled for various plugins for compatibility. -rpc_workers = 8 - -# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when -# starting API server. Not supported on OS X. -# tcp_keepidle = 600 - -# Number of seconds to keep retrying to listen -# retry_until_window = 30 - -# Number of backlog requests to configure the socket with. -# backlog = 4096 - -# Max header line to accommodate large tokens -# max_header_line = 16384 - -# Enable SSL on the API server -# use_ssl = False - -# Certificate file to use when starting API server securely -# ssl_cert_file = /path/to/certfile - -# Private key file to use when starting API server securely -# ssl_key_file = /path/to/keyfile - -# CA certificate file to use when starting API server securely to -# verify connecting clients. This is an optional parameter only required if -# API clients need to authenticate to the API server using SSL certificates -# signed by a trusted CA -# ssl_ca_file = /path/to/cafile -# ======== end of WSGI parameters related to the API server ========== - - -# ======== neutron nova interactions ========== -# Send notification to nova when port status is active. -notify_nova_on_port_status_changes = True - -# Send notifications to nova when port data (fixed_ips/floatingips) change -# so nova can update it's cache. -notify_nova_on_port_data_changes = True - -# URL for connection to nova (Only supports one nova region currently). -nova_url = http://{{ internal_vip.ip }}:8774/v2 - -# Name of nova region to use. Useful if keystone manages more than one region -nova_region_name = regionOne - -# Username for connection to nova in admin context -nova_admin_username = nova - -# The uuid of the admin nova tenant -nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }} - -# Password for connection to nova in admin context. -nova_admin_password = {{ NOVA_PASS }} - -# Authorization URL for connection to nova in admin context. -nova_admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0 - -# Number of seconds between sending events to nova if there are any events to send -send_events_interval = 2 - -# ======== end of neutron nova interactions ========== - -[quotas] -# Default driver to use for quota checks -quota_driver = neutron.db.quota_db.DbQuotaDriver - -# Resource name(s) that are supported in quota features -quota_items = network,subnet,port - -# Default number of resource allowed per tenant. A negative value means -# unlimited. -default_quota = -1 - -# Number of networks allowed per tenant. A negative value means unlimited. -quota_network = 100 - -# Number of subnets allowed per tenant. A negative value means unlimited. -quota_subnet = 100 - -# Number of ports allowed per tenant. A negative value means unlimited. -quota_port = 8000 - -# Number of security groups allowed per tenant. A negative value means -# unlimited. -quota_security_group = 1000 - -# Number of security group rules allowed per tenant. A negative value means -# unlimited. -quota_security_group_rule = 1000 - -# Number of vips allowed per tenant. A negative value means unlimited. -# quota_vip = 10 - -# Number of pools allowed per tenant. A negative value means unlimited. -# quota_pool = 10 - -# Number of pool members allowed per tenant. A negative value means unlimited. -# The default is unlimited because a member is not a real resource consumer -# on Openstack. However, on back-end, a member is a resource consumer -# and that is the reason why quota is possible. -# quota_member = -1 - -# Number of health monitors allowed per tenant. A negative value means -# unlimited. -# The default is unlimited because a health monitor is not a real resource -# consumer on Openstack. However, on back-end, a member is a resource consumer -# and that is the reason why quota is possible. -# quota_health_monitors = -1 - -# Number of routers allowed per tenant. A negative value means unlimited. -# quota_router = 10 - -# Number of floating IPs allowed per tenant. A negative value means unlimited. -# quota_floatingip = 50 - -[agent] -# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real -# root filter facility. -# Change to "sudo" to skip the filtering and just run the comand directly -root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" - -# =========== items for agent management extension ============= -# seconds between nodes reporting state to server; should be less than -# agent_down_time, best if it is half or less than agent_down_time -report_interval = 30 - -# =========== end of items for agent management extension ===== - -[keystone_authtoken] -auth_uri = http://{{ internal_vip.ip }}:5000/v2.0 -identity_uri = http://{{ internal_vip.ip }}:35357 -admin_tenant_name = service -admin_user = neutron -admin_password = {{ NEUTRON_PASS }} -signing_dir = $state_path/keystone-signing - -[database] -# This line MUST be changed to actually run the plugin. -# Example: -# connection = mysql://root:pass@127.0.0.1:3306/neutron -# Replace 127.0.0.1 above with the IP address of the database used by the -# main neutron server. (Leave it as is if the database runs on this host.) -# connection = sqlite:////var/lib/neutron/neutron.sqlite -connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron - -# The SQLAlchemy connection string used to connect to the slave database -slave_connection = - -# Database reconnection retry times - in event connectivity is lost -# set to -1 implies an infinite retry count -max_retries = 10 - -# Database reconnection interval in seconds - if the initial connection to the -# database fails -retry_interval = 10 - -# Minimum number of SQL connections to keep open in a pool -min_pool_size = 1 - -# Maximum number of SQL connections to keep open in a pool -max_pool_size = 100 - -# Timeout in seconds before idle sql connections are reaped -idle_timeout = 3600 - -# If set, use this value for max_overflow with sqlalchemy -max_overflow = 100 - -# Verbosity of SQL debugging information. 0=None, 100=Everything -connection_debug = 0 - -# Add python stack traces to SQL as comment strings -connection_trace = False - -# If set, use this value for pool_timeout with sqlalchemy -pool_timeout = 10 - -[service_providers] -# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. -# Must be in form: -# service_provider=<service_type>:<name>:<driver>[:default] -# List of allowed service types includes LOADBALANCER, FIREWALL, VPN -# Combination of <service type> and <name> must be unique; <driver> must also be unique -# This is multiline option, example for default provider: -# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default -# example of non-default provider: -# service_provider=FIREWALL:name2:firewall_driver_path -# --- Reference implementations --- -service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default -service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default -# In order to activate Radware's lbaas driver you need to uncomment the next line. -# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. -# Otherwise comment the HA Proxy line -# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default -# uncomment the following line to make the 'netscaler' LBaaS provider available. -# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver -# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. -# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default -# Uncomment the line below to use Embrane heleos as Load Balancer service provider. -# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/deploy/adapters/ansible/openstack_juno/templates/nova.conf b/deploy/adapters/ansible/openstack_juno/templates/nova.conf deleted file mode 100644 index 559a6d82..00000000 --- a/deploy/adapters/ansible/openstack_juno/templates/nova.conf +++ /dev/null @@ -1,74 +0,0 @@ -[DEFAULT] -dhcpbridge_flagfile=/etc/nova/nova.conf -dhcpbridge=/usr/bin/nova-dhcpbridge -logdir=/var/log/nova -state_path=/var/lib/nova -lock_path=/var/lib/nova/tmp -force_dhcp_release=True -iscsi_helper=tgtadm -libvirt_use_virtio_for_bridges=True -connection_type=libvirt -root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf -verbose={{ VERBOSE}} -debug={{ DEBUG }} -ec2_private_dns_show_ip=True -api_paste_config=/etc/nova/api-paste.ini -volumes_path=/var/lib/nova/volumes -enabled_apis=osapi_compute,metadata - -vif_plugging_is_fatal: false -vif_plugging_timeout: 0 - -auth_strategy = keystone - -rpc_backend = rabbit -rabbit_host = {{ rabbit_host }} -rabbit_userid = {{ RABBIT_USER }} -rabbit_password = {{ RABBIT_PASS }} - -osapi_compute_listen={{ internal_ip }} -metadata_listen={{ internal_ip }} - -my_ip = {{ internal_ip }} -vnc_enabled = True -vncserver_listen = {{ internal_ip }} -vncserver_proxyclient_address = {{ internal_ip }} -novncproxy_base_url = http://{{ internal_vip.ip }}:6080/vnc_auto.html - -novncproxy_host = {{ internal_ip }} -novncproxy_port = 6080 - -network_api_class = nova.network.neutronv2.api.API -linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver -firewall_driver = nova.virt.firewall.NoopFirewallDriver -security_group_api = neutron - -instance_usage_audit = True -instance_usage_audit_period = hour -notify_on_state_change = vm_and_task_state -notification_driver = nova.openstack.common.notifier.rpc_notifier -notification_driver = ceilometer.compute.nova_notifier - -[database] -# The SQLAlchemy connection string used to connect to the database -connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova - -[keystone_authtoken] -auth_uri = http://{{ internal_vip.ip }}:5000/2.0 -identity_uri = http://{{ internal_vip.ip }}:35357 -admin_tenant_name = service -admin_user = nova -admin_password = {{ NOVA_PASS }} - -[glance] -host = {{ internal_vip.ip }} - -[neutron] -url = http://{{ internal_vip.ip }}:9696 -auth_strategy = keystone -admin_tenant_name = service -admin_username = neutron -admin_password = {{ NEUTRON_PASS }} -admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0 -service_metadata_proxy = True -metadata_proxy_shared_secret = {{ METADATA_SECRET }} |