Update the documents for compass E release

JIRA: -

1. Rewrite vm and bm deployment docs to satisfy the new release
2. add some images for network architecture
3. Update release name, version, etc.

Change-Id: I1e9d305de5edf60d937868d49966c153d85fd2b5
Signed-off-by: Yifei Xue <xueyifei@huawei.com>

9 files changed, 124 insertions, 248 deletions

diff --git a/docs/release/installation/bmdeploy.rst b/docs/release/installation/bmdeploy.rst
index 7bf40714..d584e938 100644
--- a/docs/release/installation/bmdeploy.rst
+++ b/docs/release/installation/bmdeploy.rst
@@ -199,7 +199,7 @@ IP Settings
 
         - ip_ranges -- ip addresses range provided for this network.
 
-        - cidr -- the IPv4 address and its associated routing prefix and subnet maskã
+        - cidr -- the IPv4 address and its associated routing prefix and subnet mask?
 
         - gw -- need to add this line only if network is external.
 
@@ -226,11 +226,6 @@ Public VIP
 
         - interface -- mostly external.
 
-ONOS NIC
-~~~~~~~~
-
-        - the NIC for ONOS, if there is no ONOS configured, leave it unchanged.
-
 
 Public Network
 ~~~~~~~~~~~~~~
@@ -316,127 +311,21 @@ Public Network
 **The following figure shows the interfaces and nics of JumpHost and deployment nodes in
 huawei-pod1 network configuration(default one nic for openstack networks).**
 
-.. code-block:: console
+.. figure:: images/single_nic.png
+    :alt: Single nic scenario
+    :figclass: align-center
 
+    Fig 1. Single nic scenario
 
-    +--------------JumpHost-------------+
-    |                                   |
-    |   +-+Compass+-+                   |
-    |   |           +     +--------+    |    External-network
-    |   |         eth2+---+br-ext  +-+eth0+----------------------+
-    |   |           +     +--------+    |                        |
-    |   |           |                   |                        |
-    |   |           |                   |                        |
-    |   |           +     +--------+    |    Install-network     |
-    |   |         eth1+---+install +-+eth1+-----------------+    |
-    |   |           +     +--------+    |                   |    |
-    |   |           |                   |                   |    |
-    |   |           |                   |                   |    |
-    |   |           +                   |    IPMI-network   |    |
-    |   |         eth0                eth2+-----------+     |    |
-    |   |           +                   |             |     |    |
-    |   +---+VM+----+                   |             |     |    |
-    +-----------------------------------+             |     |    |
-                                                      |     |    |
-                                                      |     |    |
-                                                      |     |    |
-                                                      |     |    |
-    +---------------Host1---------------+             |     |    |
-    |                                   |             |     |    |
-    |                                  eth0+----------------+    |
-    |                                   |             |     |    |
-    |                   mgmt +--------+ |             |     |    |
-    |                                 | |             |     |    |
-    |                +-----------+    | |             |     |    |
-    |   external+----+  br-prv   +----+eth1+---------------------+
-    |                +-----------+    | |             |     |    |
-    |                                 | |             |     |    |
-    |                   storage +-----+ |             |     |    |
-    |                                   |             |     |    |
-    +-----------------------------------+             |     |    |
-    |                                 IPMI+-----------+     |    |
-    +-----------------------------------+             |     |    |
-                                                      |     |    |
-                                                      |     |    |
-                                                      |     |    |
-    +---------------Host2---------------+             |     |    |
-    |                                   |             |     |    |
-    |                                  eth0+----------------+    |
-    |                                   |             |          |
-    |                   mgmt +--------+ |             |          |
-    |                                 | |             |          |
-    |                +-----------+    | |             |          |
-    |   external+----+  br-prv   +----+eth1+---------------------+
-    |                +-----------+    | |             |
-    |                                 | |             |
-    |                   storage +-----+ |             |
-    |                                   |             |
-    +-----------------------------------+             |
-    |                                 IPMI+-----------+
-    +-----------------------------------+
 
 **The following figure shows the interfaces and nics of JumpHost and deployment nodes in
 intel-pod8 network configuration(openstack networks are seperated by multiple NICs).**
 
-.. code-block:: console
-
+.. figure:: images/multi_nics.png
+    :alt: Multiple nics scenario
+    :figclass: align-center
 
-    +-------------+JumpHost+------------+
-    |                                   |
-    |   +-+Compass+-+                   |
-    |   |           +     +--------+    |    External-network
-    |   |         eth2+---+br-ext  +-+eth0+----------------------+
-    |   |           +     +--------+    |                        |
-    |   |           |                   |                        |
-    |   |           |                   |                        |
-    |   |           +     +--------+    |    Install-network     |
-    |   |         eth1+---+install +-+eth1+-----------------+    |
-    |   |           +     +--------+    |                   |    |
-    |   |           |                   |                   |    |
-    |   |           |                   |                   |    |
-    |   |           +                   |    IPMI-network   |    |
-    |   |         eth0                eth2+-----------+     |    |
-    |   |           +                   |             |     |    |
-    |   +---+VM+----+                   |             |     |    |
-    +-----------------------------------+             |     |    |
-                                                      |     |    |
-                                                      |     |    |
-                                                      |     |    |
-                                                      |     |    |
-    +--------------+Host1+--------------+             |     |    |
-    |                                   |             |     |    |
-    |                                  eth0+----------------+    |
-    |                                   |             |     |    |
-    |                      +--------+   |             |     |    |
-    |         external+----+br-prv  +-+eth1+---------------------+
-    |                      +--------+   |             |     |    |
-    |         storage +---------------+eth2+-------------------------+
-    |                                   |             |     |    |   |
-    |         Mgmt    +---------------+eth3+----------------------------+
-    |                                   |             |     |    |   |  |
-    |                                   |             |     |    |   |  |
-    +-----------------------------------+             |     |    |   |  |
-    |                                 IPMI+-----------+     |    |   |  |
-    +-----------------------------------+             |     |    |   |  |
-                                                      |     |    |   |  |
-                                                      |     |    |   |  |
-                                                      |     |    |   |  |
-                                                      |     |    |   |  |
-    +--------------+Host2+--------------+             |     |    |   |  |
-    |                                   |             |     |    |   |  |
-    |                                  eth0+----------------+    |   |  |
-    |                                   |             |          |   |  |
-    |                      +--------+   |             |          |   |  |
-    |         external+----+br-prv  +-+eth1+---------------------+   |  |
-    |                      +--------+   |             |              |  |
-    |         storage +---------------+eth2+-------------------------+  |
-    |                                   |             | storage-network |
-    |         Mgmt    +---------------+eth3+----------------------------+
-    |                                   |             | mgmt-network
-    |                                   |             |
-    +-----------------------------------+             |
-    |                                 IPMI+-----------+
-    +-----------------------------------+
+    Fig 2. Multiple nics scenario
 
 
 Start Deployment (Bare Metal Deployment)
@@ -457,14 +346,14 @@ E.g.
     or
     export OS_VERSION=centos7
 
-1.2. Set ISO image corresponding to your code
+1.2. Set tarball corresponding to your code
 
 E.g.
 
 .. code-block:: bash
 
     # Set ISO image corresponding to your code
-    export ISO_URL=file:///home/compass/compass4nfv.iso
+    export ISO_URL=file:///home/compass/compass4nfv.tar.gz
 
 1.3. Set hardware deploy jumpserver PXE NIC. (set eth1 E.g.)
      You do not need to set it when virtual deploy.
@@ -491,16 +380,6 @@ nosdn-nofeature scenario deploy sample
     # NETWORK is your network.yml's path
     export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
 
-ocl-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
-
 odl_l2-moon scenario deploy sample
 
 .. code-block:: bash
@@ -531,25 +410,15 @@ odl_l3-nofeature scenario deploy sample
     # NETWORK is your network.yml's path
     export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
 
-onos-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
-
-onos-sfc deploy scenario sample
+odl-sfc deploy scenario sample
 
 .. code-block:: bash
 
     # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml
+    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl-sfc-ha.yml
 
     # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
 
 2. Run ``deploy.sh``
 
diff --git a/docs/release/installation/featureTable.rst b/docs/release/installation/featureTable.rst
index e5ad9776..7d91d2a0 100644
--- a/docs/release/installation/featureTable.rst
+++ b/docs/release/installation/featureTable.rst
@@ -4,48 +4,51 @@ Features
 Supported Openstack Version and OS
 ----------------------------------
 
-+---------------+----------+-----------+-----------+-----------+
-|               | OS       | OpenStack | OpenStack | OpenStack |
-|               | only     | Liberty   | Mitaka    | Newton    |
-+---------------+----------+-----------+-----------+-----------+
-| CentOS 7      | yes      | yes       | yes       | yes       |
-+---------------+----------+-----------+-----------+-----------+
-| Ubuntu trusty | yes      | yes       | yes       | no        |
-+---------------+----------+-----------+-----------+-----------+
-| Ubuntu xenial | yes      | no        | yes       | yes       |
-+---------------+----------+-----------+-----------+-----------+
++---------------+----------+-----------+-----------+-----------+-----------+
+|               | OS       | OpenStack | OpenStack | OpenStack | OpenStack |
+|               | only     | Liberty   | Mitaka    | Newton    | Ocata     |
++---------------+----------+-----------+-----------+-----------+-----------+
+| CentOS 7      | yes      | yes       | yes       | yes       | no        |
++---------------+----------+-----------+-----------+-----------+-----------+
+| Ubuntu trusty | yes      | yes       | yes       | no        | no        |
++---------------+----------+-----------+-----------+-----------+-----------+
+| Ubuntu xenial | yes      | no        | yes       | yes       | yes       |
++---------------+----------+-----------+-----------+-----------+-----------+
 
 
 Supported Openstack Flavor and Features
 ---------------------------------------
 
-+---------------+--------------+--------------+---------------+
-|               |  OpenStack   |  OpenStack   |  OpenStack    |
-|               |  Liberty     |  Mitaka      |  Newton       |
-+---------------+--------------+--------------+---------------+
-| Virtual       |    Yes       |    Yes       |     Yes       |
-| Deployment    |              |              |               |
-+---------------+--------------+--------------+---------------+
-| Baremetal     |    Yes       |    Yes       |     Yes       |
-| Deployment    |              |              |               |
-+---------------+--------------+--------------+---------------+
-| HA            |    Yes       |    Yes       |     Yes       |
-|               |              |              |               |
-+---------------+--------------+--------------+---------------+
-| Ceph          |    Yes       |    Yes       |     Yes       |
-|               |              |              |               |
-+---------------+--------------+--------------+---------------+
-| SDN           |    Yes       |    Yes       |     Yes*      |
-| ODL/ONOS      |              |              |               |
-+---------------+--------------+--------------+---------------+
-| Compute Node  |    Yes       |    Yes       |     Yes       |
-| Expansion     |              |              |               |
-+---------------+--------------+--------------+---------------+
-| Multi-Nic     |    Yes       |    Yes       |     Yes       |
-| Support       |              |              |               |
-+---------------+--------------+--------------+---------------+
-| Boot          |    Yes       |    Yes       |     Yes       |
-| Recovery      |              |              |               |
-+---------------+--------------+--------------+---------------+
++---------------+--------------+--------------+---------------+---------------+
+|               |  OpenStack   |  OpenStack   |  OpenStack    | OpenStack     |
+|               |  Liberty     |  Mitaka      |  Newton       | Ocata         |
++---------------+--------------+--------------+---------------+---------------+
+| Virtual       |    Yes       |    Yes       |     Yes       |    Yes        |
+| Deployment    |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| Baremetal     |    Yes       |    Yes       |     Yes       |    Yes        |
+| Deployment    |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| HA            |    Yes       |    Yes       |     Yes       |    Yes        |
+|               |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| Ceph          |    Yes       |    Yes       |     Yes       |    Yes        |
+|               |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| SDN           |    Yes       |    Yes       |     Yes       |    Yes*       |
+| ODL/ONOS      |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| Compute Node  |    Yes       |    Yes       |     Yes       |    No         |
+| Expansion     |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| Multi-Nic     |    Yes       |    Yes       |     Yes       |    Yes        |
+| Support       |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| Boot          |    Yes       |    Yes       |     Yes       |    YES        |
+| Recovery      |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
+| SFC           |    No        |    No        |     Yes       |    Yes        |
+|               |              |              |               |               |
++---------------+--------------+--------------+---------------+---------------+
 
-* ONOS support will Release in Danube 2.0 or 3.0
+* ONOS will not be supported in this release.
diff --git a/docs/release/installation/images/multi_nics.png b/docs/release/installation/images/multi_nics.png
new file mode 100644
index 00000000..5f48b6c5
--- /dev/null
+++ b/docs/release/installation/images/multi_nics.png
diff --git a/docs/release/installation/images/single_nic.png b/docs/release/installation/images/single_nic.png
new file mode 100644
index 00000000..c3898560
--- /dev/null
+++ b/docs/release/installation/images/single_nic.png
diff --git a/docs/release/installation/installation.rst b/docs/release/installation/installation.rst
index 18bac119..7c4f99a3 100644
--- a/docs/release/installation/installation.rst
+++ b/docs/release/installation/installation.rst
@@ -21,29 +21,28 @@ networking and Unix/Linux administration.
 Preconditions
 -------------
 
-Before starting the installation of the Danube release of OPNFV,
+Before starting the installation of the Euphrates release of OPNFV,
 some planning must be done.
 
 
-Retrieving the installation ISO image
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Retrieving the installation Tarball
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-First of all, The installation ISO is needed for deploying your OPNFV
-environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
-and so on.
+First of all, The installation tarball is needed for deploying your OPNFV
+environment, it included packages of compass docker images and OSA repo.
 
-The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
+The stable tarball can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
 
-The daily build ISO can be retrieved via OPNFV artifacts repository:
+The daily build tarball can be retrieved via OPNFV artifacts repository:
 
 http://artifacts.opnfv.org/compass4nfv.html
 
-NOTE: Search the keyword "compass4nfv/Danube" to locate the ISO image.
+NOTE: Search the keyword "compass4nfv/Euphrates" to locate the ISO image.
 
 E.g.
-compass4nfv/Danube/opnfv-2016-09-18_08-15-13.iso
+compass4nfv/Euphrates/opnfv-2017-09-18_08-15-13.tar.gz
 
-The name of iso image includes the time of iso building, you can get the daily
+The name of tarball includes the time of iso building, you can get the daily
 ISO according the building time.
 The git url and sha1 of Compass4nfv are recorded in properties files,
 According these, the corresponding deployment scripts can be retrieved.
@@ -58,9 +57,9 @@ To retrieve the repository of Compass4nfv on Jumphost use the following command:
 
 NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
 
-To get stable /Danube release, you can use the following command:
+To get stable /Euphrates release, you can use the following command:
 
-- git checkout Danube.1.0
+- git checkout Euphrates.1.0
 
 Setup Requirements
 ------------------
@@ -126,17 +125,17 @@ Network requirements include:
 
        -  IPMI Network
 
-       -  Openstack mgmt Network*
+       -  br-mgmt Network*
 
-       -  Openstack external Network*
+       -  br-vlan Network*
 
-       -  Openstack tenant Network*
+       -  br-tenant Network*
 
-       -  Openstack storage Network*
+       -  br-storage Network*
 
 3.     Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
 
-4.     External network has Internet access, meaning a gateway and DNS availability.
+4.     br-vlan network has Internet access, meaning a gateway and DNS availability.
 
 **The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
 **NIC(Reconfigurated in network.yml).**
diff --git a/docs/release/installation/introduction.rst b/docs/release/installation/introduction.rst
index 7470363a..d1a48631 100644
--- a/docs/release/installation/introduction.rst
+++ b/docs/release/installation/introduction.rst
@@ -5,7 +5,7 @@
 Abstract
 ========
 
-This document describes how to install the Danube release of OPNFV when
+This document describes how to install the Euphrates release of OPNFV when
 using Compass4nfv as a deployment tool covering it's limitations, dependencies
 and required system resources.
 
@@ -16,6 +16,9 @@ Version history
 | **Date**           | **Ver.**           | **Author**         | **Comment**               |
 |                    |                    |                    |                           |
 +--------------------+--------------------+--------------------+---------------------------+
+| 2017-09-01         | 4.0.0              | Yifei Xue          | Rewritten for             |
+|                    |                    | (HUAWEI)           | Compass4nfv E release     |
++--------------------+--------------------+--------------------+---------------------------+
 | 2017-02-21         | 3.0.0              | Justin chi         | Changes for D release     |
 |                    |                    | (HUAWEI)           |                           |
 +--------------------+--------------------+--------------------+---------------------------+
diff --git a/docs/release/installation/offline-deploy.rst b/docs/release/installation/offline-deploy.rst
index 0acfa180..d35d7e1b 100644
--- a/docs/release/installation/offline-deploy.rst
+++ b/docs/release/installation/offline-deploy.rst
@@ -3,15 +3,15 @@
 Offline Deploy
 ==============
 
-Compass4nfv uses offline approach to deploy cluster and support complete offline
-deployment on a jumphost without access internet. Here is the offline deployment
-instruction:
+Compass4nfv uses a repo docker container as distro and pip package source
+to deploy cluster and support complete offline deployment on a jumphost without
+access internet. Here is the offline deployment instruction:
 
 Preparation for offline deploy
 ------------------------------
 
-1.  Download compass.iso from OPNFV artifacts repository (Search compass4nfv in
-    http://artifacts.opnfv.org/ and download an appropriate ISO. ISO can also be
+1.  Download compass.tar.gz from OPNFV artifacts repository (Search compass4nfv in
+    http://artifacts.opnfv.org/ and download an appropriate tarball. Tarball can also be
     generated by script build.sh in compass4nfv root directory.)
 
 2.  Download the Jumphost preparation package from our httpserver. (Download the
@@ -25,10 +25,10 @@ Preparation for offline deploy
 Steps of offline deploy
 -----------------------
 
-1.  Copy the compass.iso, jh_env_package.tar.gz and the compass4nfv code
+1.  Copy the compass.tar.gz, jh_env_package.tar.gz and the compass4nfv code
     repository to your jumphost.
 
-2.  Export the local path of the compass.iso and jh_env_package.tar.gz on
+2.  Export the local path of the compass.tar.gz and jh_env_package.tar.gz on
     jumphost. Then you can perform deployment on a offline jumphost.
 
 E.g.
@@ -41,7 +41,13 @@ Export the compass4nfv.iso and jh_env_package.tar.gz path
     export ISO_URL=file:///home/compass/compass4nfv.iso
     export JHPKG_URL=file:///home/compass/jh_env_package.tar.gz
 
-Run deploy.sh
+3.  Open the OSA offline deployment switch on jumphost.
+
+.. code-block:: bash
+
+    export OFFLINE_DEPLOY=Enable
+
+4.  Run deploy.sh
 
 .. code-block:: bash
 
diff --git a/docs/release/installation/preconditions.rst b/docs/release/installation/preconditions.rst
index 67c0728a..3ba42ab6 100644
--- a/docs/release/installation/preconditions.rst
+++ b/docs/release/installation/preconditions.rst
@@ -21,30 +21,30 @@ networking and Unix/Linux administration.
 Preconditions
 -------------
 
-Before starting the installation of the Danube release of OPNFV,
+Before starting the installation of the Euphrates release of OPNFV,
 some planning must be done.
 
 
-Retrieving the installation ISO image
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Retrieving the installation tarball
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-First of all, The installation ISO is needed for deploying your OPNFV
+First of all, The installation tarball is needed for deploying your OPNFV
 environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
 and so on.
 
-The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
+The stable release tarball can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
 
-The daily build ISO can be retrieved via OPNFV artifacts repository:
+The daily build tarball can be retrieved via OPNFV artifacts repository:
 
 http://artifacts.opnfv.org/compass4nfv.html
 
-NOTE: Search the keyword "compass4nfv/Danube" to locate the ISO image.
+NOTE: Search the keyword "compass4nfv/Euphrates" to locate the tarball.
 
 E.g.
-compass4nfv/danube/opnfv-2017-03-29_08-55-09.iso
+compass4nfv/euphrates/opnfv-2017-03-29_08-55-09.tar.gz
 
-The name of iso image includes the time of iso building, you can get the daily
-ISO according the building time.
+The name of tarball includes the time of tarball building, you can get the daily
+tarball according the building time.
 The git url and sha1 of Compass4nfv are recorded in properties files,
 According these, the corresponding deployment scripts can be retrieved.
 
@@ -58,9 +58,9 @@ To retrieve the repository of Compass4nfv on Jumphost use the following command:
 
 NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
 
-To get stable /Danube release, you can use the following command:
+To get stable/euphrates release, you can use the following command:
 
-- git checkout Danube.1.0
+- git checkout Euphrates.1.0
 
 Setup Requirements
 ------------------
diff --git a/docs/release/installation/vmdeploy.rst b/docs/release/installation/vmdeploy.rst
index 610ff51a..16fb28d3 100644
--- a/docs/release/installation/vmdeploy.rst
+++ b/docs/release/installation/vmdeploy.rst
@@ -5,6 +5,22 @@
 Installation on virtual machines
 ================================
 
+Quick Start
+-----------
+
+Only 1 command to try virtual deployment, if you have Internet access. Just Paste it and Run.
+
+.. code-block:: bash
+
+    curl https://raw.githubusercontent.com/opnfv/compass4nfv/euphrates/quickstart.sh | bash
+
+If you want to deploy noha with1 controller and 1 compute, run the following command
+
+.. code-block:: bash
+    export SCENARIO=os-nosdn-nofeature-noha.yml
+    export VIRT_NUMBER=2
+    curl https://raw.githubusercontent.com/opnfv/compass4nfv/euphrates/quickstart.sh | bash
+
 Nodes Configuration (Virtual Deployment)
 ----------------------------------------
 
@@ -129,7 +145,7 @@ Start Deployment (Virtual Deployment)
 1. Edit deploy.sh
 
 1.1. Set OS version for deployment nodes.
-     Compass4nfv supports ubuntu and centos based openstack newton.
+     Compass4nfv supports ubuntu and centos based openstack ocata.
 
 E.g.
 
@@ -148,7 +164,7 @@ E.g.
 .. code-block:: bash
 
     # Set ISO image corresponding to your code
-    export ISO_URL=file:///home/compass/compass4nfv.iso
+    export ISO_URL=file:///home/compass/compass4nfv.tar.gz
 
 1.3. Set scenario that you want to deploy
 
@@ -164,16 +180,6 @@ nosdn-nofeature scenario deploy sample
     # NETWORK is your network.yml's path
     export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
 
-ocl-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-ocl-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_ocl.yml
-
 odl_l2-moon scenario deploy sample
 
 .. code-block:: bash
@@ -204,25 +210,15 @@ odl_l3-nofeature scenario deploy sample
     # NETWORK is your network.yml's path
     export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
 
-onos-nofeature scenario deploy sample
+odl-sfc deploy scenario sample
 
 .. code-block:: bash
 
     # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-onos-nofeature-ha.yml
+    export DHA=./deploy/conf/vm_environment/os-odl-sfc-ha.yml
 
     # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
-
-onos-sfc deploy scenario sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-onos-sfc-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
+    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
 
 2. Run ``deploy.sh``