Adjusted the docs structure

JIRA:DOCS-159

Change-Id: I30b655740634fc5a46fec3be707cb3abc9274502
Signed-off-by: liyuenan <liyuenan@huawei.com>

7 files changed, 0 insertions, 856 deletions

diff --git a/docs/configguide/bmdeploy.rst b/docs/configguide/bmdeploy.rst
deleted file mode 100644
index 7cc4b9ce..00000000
--- a/docs/configguide/bmdeploy.rst
+++ /dev/null
@@ -1,326 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Installation Guide (Bare Metal Deployment)
-==========================================
-
-Nodes Configuration (Bare Metal Deployment)
--------------------------------------------
-
-The below file is the inventory template of deployment nodes:
-
-"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml"
-
-You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
-
-        - name -- Host name for deployment node after installation.
-
-        - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
-          or IPMI 2.0 is available.
-
-        - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
-          from Jumphost.
-
-        - ipmiUser -- IPMI Username for deployment node.
-
-        - ipmiPass -- IPMI Password for deployment node.
-
-        - mac -- MAC Address of deployment node PXE NIC .
-
-        - roles -- Components deployed.
-
-**Set TYPE/FLAVOR and POWER TOOL**
-
-E.g.
-.. code-block:: yaml
-
-    TYPE: baremetal
-    FLAVOR: cluster
-    POWER_TOOL: ipmitool
-
-**Set ipmiUser/ipmiPass and ipmiVer**
-
-E.g.
-
-.. code-block:: yaml
-
-    ipmiUser: USER
-    ipmiPass: PASSWORD
-    ipmiVer: '2.0'
-
-E.g. Openstack only deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        mac: 'F8:4A:BF:55:A2:8D'
-        interfaces:
-           - eth1: 'F8:4A:BF:55:A2:8E'
-        ipmiIp: 172.16.130.26
-        roles:
-          - controller
-          - ha
-
-      - name: host2
-        mac: 'D8:49:0B:DA:5A:B7'
-        interfaces:
-          - eth1: 'D8:49:0B:DA:5A:B8'
-        ipmiIp: 172.16.130.27
-        roles:
-          - compute
-
-NOTE:
-IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
-
-E.g. Openstack and ceph deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        mac: 'F8:4A:BF:55:A2:8D'
-        interfaces:
-           - eth1: 'F8:4A:BF:55:A2:8E'
-        ipmiIp: 172.16.130.26
-        roles:
-          - controller
-          - ha
-          - ceph-adm
-          - ceph-mon
-
-      - name: host2
-        mac: 'D8:49:0B:DA:5A:B7'
-        interfaces:
-          - eth1: 'D8:49:0B:DA:5A:B8'
-        ipmiIp: 172.16.130.27
-        roles:
-          - compute
-          - ceph-osd
-
-E.g. Openstack and ODL deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        mac: 'F8:4A:BF:55:A2:8D'
-        interfaces:
-           - eth1: 'F8:4A:BF:55:A2:8E'
-        ipmiIp: 172.16.130.26
-        roles:
-          - controller
-          - ha
-          - odl
-
-      - name: host2
-        mac: 'D8:49:0B:DA:5A:B7'
-        interfaces:
-          - eth1: 'D8:49:0B:DA:5A:B8'
-        ipmiIp: 172.16.130.27
-        roles:
-          - compute
-
-E.g. Openstack and ONOS deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        mac: 'F8:4A:BF:55:A2:8D'
-        interfaces:
-           - eth1: 'F8:4A:BF:55:A2:8E'
-        ipmiIp: 172.16.130.26
-        roles:
-          - controller
-          - ha
-          - onos
-
-      - name: host2
-        mac: 'D8:49:0B:DA:5A:B7'
-        interfaces:
-          - eth1: 'D8:49:0B:DA:5A:B8'
-        ipmiIp: 172.16.130.27
-        roles:
-          - compute
-
-Network Configuration (Bare Metal Deployment)
----------------------------------------------
-
-Before deployment, there are some network configuration to be checked based
-on your network topology.Compass4nfv network default configuration file is
-"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml".
-You can write your own reference to it.
-
-**The following figure shows the default network configuration.**
-
-.. code-block:: console
-
-
-      +--+                          +--+     +--+
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+  Jumphost  +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host1   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host2   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |      +------------+      |  |     |  |
-      |  +------+    host3   +------+  |     |  |
-      |  |      +------+-----+      |  |     |  |
-      |  |             |            |  |     |  |
-      |  |             +------------+  +-----+  |
-      |  |                          |  |     |  |
-      |  |                          |  |     |  |
-      +-++                          ++-+     +-++
-        ^                            ^         ^
-        |                            |         |
-        |                            |         |
-      +-+-------------------------+  |         |
-      |      External Network     |  |         |
-      +---------------------------+  |         |
-             +-----------------------+---+     |
-             |       IPMI Network        |     |
-             +---------------------------+     |
-                     +-------------------------+-+
-                     | PXE(Installation) Network |
-                     +---------------------------+
-
-
-Start Deployment (Bare Metal Deployment)
-----------------------------------------
-
-1. Edit run.sh
-
-Set OS version and OpenStack version for deployment nodes.
-    Compass4nfv Colorado supports three OS version based openstack mitaka.
-
-E.g.
-
-.. code-block:: bash
-
-    ########## Ubuntu14.04 Mitaka ##########
-    export OS_VERSION=trusty
-    export OPENSTACK_VERSION=mitaka
-
-    ########## Ubuntu16.04 Mitaka ##########
-    # export OS_VERSION=xenial
-    # export OPENSTACK_VERSION=mitaka_xenial
-
-    ########## Centos7 Mitaka ##########
-    # export OS_VERSION=centos7
-    # export OPENSTACK_VERSION=mitaka
-
-Set ISO image that you want to deploy
-
-E.g.
-
-.. code-block:: bash
-
-    # ISO_URL is your iso's absolute path
-    export ISO_URL=file:///home/compass/compass4nfv.iso
-    # or
-    # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
-
-Set Jumphost PXE NIC. (set eth1 E.g.)
-
-E.g.
-
-.. code-block:: bash
-
-    ########## Hardware Deploy Jumpserver PXE NIC ##########
-    # you need comment out it when virtual deploy
-    export INSTALL_NIC=eth1
-
-Set scenario that you want to deploy
-
-E.g.
-
-nosdn-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-ocl-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
-
-odl_l2-moon scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-odl_l2-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-odl_l3-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-onos-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
-
-onos-sfc deploy scenario sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
-
-2. Run ``run.sh``
-
-.. code-block:: bash
-
-    ./run.sh
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
deleted file mode 100644
index fa212a03..00000000
--- a/docs/configguide/index.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
-.. http://creativecommons.org/licenses/by/4.0
-
-********************************************************
-OPNFV(Colorado) Compass4nfv installation instructions
-********************************************************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 4
-
-   introduction.rst
-   installerconfig.rst
-   bmdeploy.rst
-   vmdeploy.rst
-   references.rst
diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst
deleted file mode 100644
index 9e552494..00000000
--- a/docs/configguide/installerconfig.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Compass4nfv configuration
-=========================
-
-This document describes providing guidelines on how to install and
-configure the Colorado release of OPNFV when using Compass as a
-deployment tool including required software and hardware
-configurations.
-
-Installation and configuration of host OS, OpenStack, OpenDaylight,
-ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
-nodes.
-
-The audience of this document is assumed to have good knowledge in
-networking and Unix/Linux administration.
-
-
-Preconditions
--------------
-
-Before starting the installation of the Colorado release of OPNFV,
-some planning must be done.
-
-
-Retrieving the installation ISO image
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-First of all, The installation ISO is needed for deploying your OPNFV
-environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
-and so on.
-
-The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
-
-The daily build ISO can be retrieved via OPNFV artifacts repository:
-
-http://artifacts.opnfv.org/
-
-NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image.
-
-E.g.
-compass4nfv/colorado/opnfv-2016-01-16_15-03-18.iso
-compass4nfv/colorado/opnfv-2016-01-16_15-03-18.properties
-
-The name of iso image includes the time of iso building, you can get the daily
-ISO according the building time.
-The git url and sha1 of Compass4nfv are recorded in properties files,
-According these, the corresponding deployment scripts can be retrieved.
-
-
-Getting the deployment scripts
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-To retrieve the repository of Compass4nfv on Jumphost use the following command:
-
-- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
-
-NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY(Include subfolders).
-
-To get stable /colorado release, you can use the following command:
-
-- git checkout colorado.1.0
-
-Setup Requirements
-------------------
-
-If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
-than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
-servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
-1 for compute.
-
-
-Jumphost Requirements
-~~~~~~~~~~~~~~~~~~~~~
-
-The Jumphost requirements are outlined below:
-
-1.     Ubuntu 14.04 (Pre-installed).
-
-2.     Root access.
-
-3.     libvirt virtualization support.
-
-4.     Minimum 2 NICs.
-
-       -  PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
-
-       -  IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
-
-       -  External Network (Optional: Internet access)
-
-5.     16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
-
-6.     CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk)
-
-
-Bare Metal Node Requirements
-----------------------------
-
-Bare Metal nodes require:
-
-1.     IPMI enabled on OOB interface for power control.
-
-2.     BIOS boot priority should be PXE first then local hard disk.
-
-3.     Minimum 3 NICs.
-
-       -  PXE installation Network (Broadcasting PXE request)
-
-       -  IPMI Network (Receiving IPMI command from Jumphost)
-
-       -  External Network (OpenStack mgmt/external/storage/tenant network)
-
-
-Network Requirements
---------------------
-
-Network requirements include:
-
-1.     No DHCP or TFTP server running on networks used by OPNFV.
-
-2.     2-6 separate networks with connectivity between Jumphost and nodes.
-
-       -  PXE installation Network
-
-       -  IPMI Network
-
-       -  Openstack mgmt Network*
-
-       -  Openstack external Network*
-
-       -  Openstack tenant Network*
-
-       -  Openstack storage Network*
-
-3.     Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
-
-4.     External network has Internet access, meaning a gateway and DNS availability.
-
-**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
-**NIC(Reconfigurated in network.yml).**
-
-
-Execution Requirements (Bare Metal Only)
-----------------------------------------
-
-In order to execute a deployment, one must gather the following information:
-
-1.     IPMI IP addresses of the nodes.
-
-2.     IPMI login information for the nodes (user/pass).
-
-3.     MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
diff --git a/docs/configguide/introduction.rst b/docs/configguide/introduction.rst
deleted file mode 100644
index 820cb29a..00000000
--- a/docs/configguide/introduction.rst
+++ /dev/null
@@ -1,29 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Abstract
-========
-
-This document describes how to install the Brahmaputra release of OPNFV when
-using Compass4nfv as a deployment tool covering it's limitations, dependencies
-and required system resources.
-
-Version history
-===============
-
-+--------------------+--------------------+--------------------+---------------------------+
-| **Date**           | **Ver.**           | **Author**         | **Comment**               |
-|                    |                    |                    |                           |
-+--------------------+--------------------+--------------------+---------------------------+
-| 2016-01-17         | 1.0.0              | Justin chi         | Rewritten for             |
-|                    |                    | (HUAWEI)           | Compass4nfv B release     |
-+--------------------+--------------------+--------------------+---------------------------+
-| 2015-12-16         | 0.0.2              | Matthew Li         | Minor changes &           |
-|                    |                    | (HUAWEI)           | formatting                |
-+--------------------+--------------------+--------------------+---------------------------+
-| 2015-09-12         | 0.0.1              | Chen Shuai         | First draft               |
-|                    |                    | (HUAWEI)           |                           |
-+--------------------+--------------------+--------------------+---------------------------+
-
-
diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst
deleted file mode 100644
index f9b7aa92..00000000
--- a/docs/configguide/postinstall.rst
+++ /dev/null
@@ -1,32 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
-.. http://creativecommons.org/licenses/by/4.0
-
-.. commented as there is no content for this file at this time.
-
-.. <Project> post installation procedures
-.. ======================================
-.. Add a brief introduction to the methods of validating the installation
-.. according to this specific installer or feature.
-
-.. Automated post installation activities
-.. --------------------------------------
-.. Describe specific post installation activities performed by the OPNFV
-.. deployment pipeline including testing activities and reports. Refer to
-.. the relevant testing guides, results, and release notes.
-
-.. note: this section should be singular and derived from the test projects
-.. once we have one test suite to run for all deploy tools.  This is not the
-.. case yet so each deploy tool will need to provide (hopefully very simillar)
-.. documentation of this.
-
-.. <Project> post configuration procedures
-.. ---------------------------------------
-.. Describe any deploy tool or feature specific scripts, tests or procedures
-.. that should be carried out on the deployment post install and configuration
-.. in this section.
-
-.. Platform components validation
-.. ---------------------------------
-.. Describe any component specific validation procedures necessary for your
-.. deployment tool in this section.
-
diff --git a/docs/configguide/references.rst b/docs/configguide/references.rst
deleted file mode 100644
index 467bf08d..00000000
--- a/docs/configguide/references.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-References
-==========
-
-OPNFV
------
-
-`OPNFV Home Page <www.opnfv.org>`_
-
-`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_
-
-`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
-
-OpenStack
----------
-
-`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
-
-`OpenStack documentation <http://docs.openstack.org>`_
-
-OpenDaylight
-------------
-
-`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
-
-ONOS
-----
-
-`ONOS artifacts <http://onosproject.org/software/>`_
-
-Compass
--------
-
-`Compass Home Page <http://www.syscompass.org/>`_
-
diff --git a/docs/configguide/vmdeploy.rst b/docs/configguide/vmdeploy.rst
deleted file mode 100644
index cb5df6fb..00000000
--- a/docs/configguide/vmdeploy.rst
+++ /dev/null
@@ -1,260 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Installation Guide (Virtual Deployment)
-=======================================
-
-Nodes Configuration (Virtual Deployment)
-----------------------------------------
-
-The below file is the inventory template of deployment nodes:
-
-"./deploy/conf/vm_environment/huawei-virtual1/network.yml"
-
-You can write your own address/roles reference to it.
-
-        - name -- Host name for deployment node after installation.
-
-        - roles -- Components deployed.
-
-**Set TYPE and FLAVOR**
-
-E.g.
-
-.. code-block:: yaml
-
-    TYPE: virtual
-    FLAVOR: cluster
-
-**Assignment of different roles to servers**
-
-E.g. Openstack only deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-
-      - name: host2
-        roles:
-          - compute
-
-NOTE:
-IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
-
-E.g. Openstack and ceph deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - ceph-adm
-          - ceph-mon
-
-      - name: host2
-        roles:
-          - compute
-          - ceph-osd
-
-E.g. Openstack and ODL deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - odl
-
-      - name: host2
-        roles:
-          - compute
-
-E.g. Openstack and ONOS deployment roles setting
-
-.. code-block:: yaml
-
-    hosts:
-      - name: host1
-        roles:
-          - controller
-          - ha
-          - onos
-
-      - name: host2
-        roles:
-          - compute
-
-Network Configuration (Virtual Deployment)
-------------------------------------------
-
-Before deployment, there are some network configuration to be checked based
-on your network topology.Compass4nfv network default configuration file is
-"compass4nfv/deploy/conf/vm_environment/huawei-virtual1/network.yml".
-You can write your own reference to it.
-
-**The following figure shows the default network configuration.**
-
-.. code-block:: console
-
-
-      +--+                          +--+
-      |  |                          |  |
-      |  |      +------------+      |  |
-      |  +------+  Jumphost  +------+  |
-      |  |      +------+-----+      |  |
-      |  |             |            |  |
-      |  |             +------------+  |
-      |  |                          |  |
-      |  |      +------------+      |  |
-      |  +------+    host1   +------+  |
-      |  |      +------+-----+      |  |
-      |  |             |            |  |
-      |  |             +------------+  |
-      |  |                          |  |
-      |  |      +------------+      |  |
-      |  +------+    host2   +------+  |
-      |  |      +------+-----+      |  |
-      |  |             |            |  |
-      |  |             +------------+  |
-      |  |                          |  |
-      |  |      +------------+      |  |
-      |  +------+    host3   +------+  |
-      |  |      +------+-----+      |  |
-      |  |             |            |  |
-      |  |             +------------+  |
-      |  |                          |  |
-      |  |                          |  |
-      +-++                          ++-+
-        ^                            ^
-        |                            |
-        |                            |
-      +-+-------------------------+  |
-      |      External Network     |  |
-      +---------------------------+  |
-             +-----------------------+---+
-             |    Installation Network   |
-             +---------------------------+
-
-Start Deployment (Virtual Deployment)
--------------------------------------
-
-1. Edit run.sh
-
-Set OS version and OpenStack version for deployment nodes.
-    Compass4nfv Colorado supports three OS version based openstack mitaka.
-
-E.g.
-
-.. code-block:: bash
-
-    ########## Ubuntu14.04 Mitaka ##########
-    export OS_VERSION=trusty
-    export OPENSTACK_VERSION=mitaka
-
-    ########## Ubuntu16.04 Mitaka ##########
-    # export OS_VERSION=xenial
-    # export OPENSTACK_VERSION=mitaka_xenial
-
-    ########## Centos7 Mitaka ##########
-    # export OS_VERSION=centos7
-    # export OPENSTACK_VERSION=mitaka
-
-Set ISO image that you want to deploy
-
-E.g.
-
-.. code-block:: bash
-
-    # ISO_URL is your iso's absolute path
-    # export ISO_URL=file:///home/compass/compass4nfv.iso
-    # or
-    # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
-
-Set scenario that you want to deploy
-
-E.g.
-
-nosdn-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-nosdn-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-ocl-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-ocl-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_ocl.yml
-
-odl_l2-moon scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-odl_l2-moon-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-odl_l2-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-odl_l2-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-odl_l3-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-odl_l3-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-onos-nofeature scenario deploy sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-onos-nofeature-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
-
-onos-sfc deploy scenario sample
-
-.. code-block:: bash
-
-    # DHA is your dha.yml's path
-    export DHA=./deploy/conf/vm_environment/os-onos-sfc-ha.yml
-
-    # NETWORK is your network.yml's path
-    export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
-
-2. Run ``run.sh``
-
-.. code-block:: bash
-
-    ./run.sh