Installation and release documentations update

JIRA: DOCS-165

update document for Danube release according to new doc guide;
https://wiki.opnfv.org/display/DOC/Documentation+Guide
add network topology for virtual and bm deployment;
add a section for network_cfg.yaml configuration;
add feature section, listing supported openstack version and features
update installation for deployment and expansion.

Change-Id: If43d94554bebc78bbd56cdf889c8c34dda926218
Signed-off-by: Qingyu <qingyuwang33@gmail.com>
Signed-off-by: Justin <chigang@huawei.com>

1 files changed, 0 insertions, 129 deletions

diff --git a/docs/FAQ/faq.rst b/docs/FAQ/faq.rst
deleted file mode 100644
index 177ff0bb..00000000
--- a/docs/FAQ/faq.rst
+++ /dev/null
@@ -1,129 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-
-What is Compass4nfv
-===================
-
-Compass4nfv is an installer project based on open source project Compass,
-which provides automated deployment and management of OpenStack and other distributed systems.
-It can be considered as what the LiveCD to a single box for a pool of servers – bootstrapping
-the server pool.
-
-see more information, please visit
-
-`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
-
-`COMPASS Home Page <http://www.syscompass.org/>`_
-
-What's the additional setting in switch if use the default network configuration
-================================================================================
-
-Here is the Compass4nfv default network configration file:
-compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml
-OR
-compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-It uses a VLAN network for mgmt and storage networks that are share one NIC(eth1) as a
-default network configuration. So you need add an additional tagged VLAN (101) and VLAN (102) on
-eth1's switch for access.
-
-How to deal with installation failure caused by setting pxe and reset nodes failed
-==================================================================================
-
-At first, please make sure that deployed nodes' ipmi network can access from Jumphost and
-IPMI user/pass is correct.
-
-Compass4nfv supports IPMI 1.0 or IPMI 2.0 to control your nodes, so you can set it according your IPMI
-version in dha.yml.
-
-.. code-block:: yaml
-
-    ipmiVer: '2.0'
-
-How to deal with installation failure caused by "The Server quit without updating PID file"
-===========================================================================================
-
-If you see "The Server quit without updating PID file" in installation print log, it is caused by
-mgmt network can't access from each deployed nodes, so you need to check your switch setting whether
-an additional tagged VLAN is added if uses default network configuration.
-
-How to set OpenStack Dashboard login user and password
-======================================================
-
-It uses admin/console as the default user/pass for OpenStack Dashboard, and you can set it in below file:
-compass4nfv/deploy/conf/base.conf
-
-How to visit OpenStack Dashboard
-================================
-
-You can visit OpenStack Dashboard by URL: http://{puclib_vip}/horizon
-
-The public virtual IP is configured in "compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml"
-or "compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml", defined as below:
-
-.. code-block:: yaml
-
-    public_vip:
-      ip: 192.168.50.240
-
-How to access controller nodes after deployment
-===============================================
-
-1. First you should login Compass VM via ssh command on Jumphost by default user/pass root/root.
-The default login IP of Compass VM is configured in "compass4nfv/deploy/conf/base.conf", defined as below:
-
-.. code-block:: bash
-
-    export MGMT_IP=${MGMT_IP:-192.168.200.2}
-
-2. Then you can login the controller nodes (host1-3) by default user/pass root/root via the install
-network IPs which are configured in "compass4nfv/deploy/conf/base.conf", defined as below:
-
-.. code-block:: bash
-
-    export MANAGEMENT_IP_START=${MANAGEMENT_IP_START:-'10.1.0.50'}
-
-
-.. code-block:: console
-
-
-                                              +-------------+
-                                              |             |
-                                   +----------+    host1    |
-                                   |          |             |
-                                   |          +-------------+
-                                   |
-         +---------+               |          +-------------+
-         |         |      install  |          |             |
-         | Compass +---------------+----------+    host2    |
-         |         |      network  |          |             |
-         +---+VM+--+               |          +-------------+
-    +--------------------+         |
-    |                    |         |          +-------------+
-    |      Jumphost      |         |          |             |
-    |                    |         +----------+    host3    |
-    +--------------------+                    |             |
-                                              +-------------+
-
-
-Where is OpenStack RC file
-==========================
-
-It is located /opt/admin-openrc.sh in each controller node as default. Please source it first if you
-want to use OpenStack CLI.
-
-How to recovery network connection after Jumphost reboot
-========================================================
-
-.. code-block:: bash
-
-    source deploy/network.sh && save_network_info
-
-References
-==========
-For more information on the Compass4nfv FAQ, please visit
-
-`COMPASS FAQ WIKI Page <https://wiki.opnfv.org/compass4nfv_faq>`_
-