Remove obsoleted code

JIRA:-

use OpenStack-ansible deploy openstack, so remove obsoleted code.
Some of the enhanced features will be added in later versions

Change-Id: Ie92b92b5de234a7d7d03b578b0bc15fd0218b3b3
Signed-off-by: chigang <chigang@huawei.com>

6 files changed, 0 insertions, 1746 deletions

diff --git a/deploy/adapters/ansible/roles/swift/templates/account-server.conf b/deploy/adapters/ansible/roles/swift/templates/account-server.conf
deleted file mode 100644
index ea84799f..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/account-server.conf
+++ /dev/null
@@ -1,200 +0,0 @@
-[DEFAULT]
-bind_ip = {{ internal_ip }}
-bind_port = 6002
-# bind_timeout = 30
-# backlog = 4096
-user = swift
-swift_dir = /etc/swift
-devices = /srv/node
-mount_check = true
-# disable_fallocate = false
-#
-# Use an integer to override the number of pre-forked processes that will
-# accept connections.
-# workers = auto
-#
-# Maximum concurrent requests per worker
-# max_clients = 1024
-#
-# You can specify default log routing here if you want:
-# log_name = swift
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-# The following caps the length of log lines to the value given; no limit if
-# set to 0, the default.
-# log_max_line_length = 0
-#
-# comma separated list of functions to call to setup custom log handlers.
-# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
-# adapted_logger
-# log_custom_handlers =
-#
-# If set, log_udp_host will override log_address
-# log_udp_host =
-# log_udp_port = 514
-#
-# You can enable StatsD logging here:
-# log_statsd_host =
-# log_statsd_port = 8125
-# log_statsd_default_sample_rate = 1.0
-# log_statsd_sample_rate_factor = 1.0
-# log_statsd_metric_prefix =
-#
-# If you don't mind the extra disk space usage in overhead, you can turn this
-# on to preallocate disk space with SQLite databases to decrease fragmentation.
-# db_preallocation = off
-#
-# eventlet_debug = false
-#
-# You can set fallocate_reserve to the number of bytes you'd like fallocate to
-# reserve, whether there is space for the given file size or not.
-# fallocate_reserve = 0
-
-[pipeline:main]
-pipeline = healthcheck recon account-server
-
-[app:account-server]
-use = egg:swift#account
-# You can override the default log routing for this app here:
-# set log_name = account-server
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_requests = true
-# set log_address = /dev/log
-#
-# auto_create_account_prefix = .
-#
-# Configure parameter for creating specific server
-# To handle all verbs, including replication verbs, do not specify
-# "replication_server" (this is the default). To only handle replication,
-# set to a True value (e.g. "True" or "1"). To handle only non-replication
-# verbs, set to "False". Unless you have a separate replication network, you
-# should not specify any value for "replication_server". Default is empty.
-# replication_server = false
-
-[filter:healthcheck]
-use = egg:swift#healthcheck
-# An optional filesystem path, which if present, will cause the healthcheck
-# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
-# disable_path =
-
-[filter:recon]
-use = egg:swift#recon
-recon_cache_path = /var/cache/swift
-
-[account-replicator]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = account-replicator
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# Maximum number of database rows that will be sync'd in a single HTTP
-# replication request. Databases with less than or equal to this number of
-# differing rows will always be sync'd using an HTTP replication request rather
-# than using rsync.
-# per_diff = 1000
-#
-# Maximum number of HTTP replication requests attempted on each replication
-# pass for any one container. This caps how long the replicator will spend
-# trying to sync a given database per pass so the other databases don't get
-# starved.
-# max_diffs = 100
-#
-# Number of replication workers to spawn.
-# concurrency = 8
-#
-# Time in seconds to wait between replication passes
-# interval = 30
-# run_pause is deprecated, use interval instead
-# run_pause = 30
-#
-# node_timeout = 10
-# conn_timeout = 0.5
-#
-# The replicator also performs reclamation
-# reclaim_age = 604800
-#
-# Allow rsync to compress data which is transmitted to destination node
-# during sync. However, this is applicable only when destination node is in
-# a different region than the local one.
-# rsync_compress = no
-#
-# Format of the rysnc module where the replicator will send data. See
-# etc/rsyncd.conf-sample for some usage examples.
-# rsync_module = {replication_ip}::account
-#
-# recon_cache_path = /var/cache/swift
-
-[account-auditor]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = account-auditor
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# Will audit each account at most once per interval
-# interval = 1800
-#
-# accounts_per_second = 200
-# recon_cache_path = /var/cache/swift
-
-[account-reaper]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = account-reaper
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# concurrency = 25
-# interval = 3600
-# node_timeout = 10
-# conn_timeout = 0.5
-#
-# Normally, the reaper begins deleting account information for deleted accounts
-# immediately; you can set this to delay its work however. The value is in
-# seconds; 2592000 = 30 days for example.
-# delay_reaping = 0
-#
-# If the account fails to be be reaped due to a persistent error, the
-# account reaper will log a message such as:
-#     Account <name> has not been reaped since <date>
-# You can search logs for this message if space is not being reclaimed
-# after you delete account(s).
-# Default is 2592000 seconds (30 days). This is in addition to any time
-# requested by delay_reaping.
-# reap_warn_after = 2592000
-
-# Note: Put it at the beginning of the pipeline to profile all middleware. But
-# it is safer to put this after healthcheck.
-[filter:xprofile]
-use = egg:swift#xprofile
-# This option enable you to switch profilers which should inherit from python
-# standard profiler. Currently the supported value can be 'cProfile',
-# 'eventlet.green.profile' etc.
-# profile_module = eventlet.green.profile
-#
-# This prefix will be used to combine process ID and timestamp to name the
-# profile data file.  Make sure the executing user has permission to write
-# into this path (missing path segments will be created, if necessary).
-# If you enable profiling in more than one type of daemon, you must override
-# it with an unique value like: /var/log/swift/profile/account.profile
-# log_filename_prefix = /tmp/log/swift/profile/default.profile
-#
-# the profile data will be dumped to local disk based on above naming rule
-# in this interval.
-# dump_interval = 5.0
-#
-# Be careful, this option will enable profiler to dump data into the file with
-# time stamp which means there will be lots of files piled up in the directory.
-# dump_timestamp = false
-#
-# This is the path of the URL to access the mini web UI.
-# path = /__profile__
-#
-# Clear the data when the wsgi server shutdown.
-# flush_at_shutdown = false
-#
-# unwind the iterator of applications
-# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/container-server.conf b/deploy/adapters/ansible/roles/swift/templates/container-server.conf
deleted file mode 100644
index 88cd2ebb..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/container-server.conf
+++ /dev/null
@@ -1,229 +0,0 @@
-[DEFAULT]
-bind_ip = {{ internal_ip }} 
-bind_port = 6001
-# bind_timeout = 30
-# backlog = 4096
-user = swift
-swift_dir = /etc/swift
-devices = /srv/node
-mount_check = true
-# disable_fallocate = false
-#
-# Use an integer to override the number of pre-forked processes that will
-# accept connections.
-# workers = auto
-#
-# Maximum concurrent requests per worker
-# max_clients = 1024
-#
-# This is a comma separated list of hosts allowed in the X-Container-Sync-To
-# field for containers. This is the old-style of using container sync. It is
-# strongly recommended to use the new style of a separate
-# container-sync-realms.conf -- see container-sync-realms.conf-sample
-# allowed_sync_hosts = 127.0.0.1
-#
-# You can specify default log routing here if you want:
-# log_name = swift
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-# The following caps the length of log lines to the value given; no limit if
-# set to 0, the default.
-# log_max_line_length = 0
-#
-# comma separated list of functions to call to setup custom log handlers.
-# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
-# adapted_logger
-# log_custom_handlers =
-#
-# If set, log_udp_host will override log_address
-# log_udp_host =
-# log_udp_port = 514
-#
-# You can enable StatsD logging here:
-# log_statsd_host =
-# log_statsd_port = 8125
-# log_statsd_default_sample_rate = 1.0
-# log_statsd_sample_rate_factor = 1.0
-# log_statsd_metric_prefix =
-#
-# If you don't mind the extra disk space usage in overhead, you can turn this
-# on to preallocate disk space with SQLite databases to decrease fragmentation.
-# db_preallocation = off
-#
-# eventlet_debug = false
-#
-# You can set fallocate_reserve to the number of bytes you'd like fallocate to
-# reserve, whether there is space for the given file size or not.
-# fallocate_reserve = 0
-
-[pipeline:main]
-pipeline = healthcheck recon container-server
-
-[app:container-server]
-use = egg:swift#container
-# You can override the default log routing for this app here:
-# set log_name = container-server
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_requests = true
-# set log_address = /dev/log
-#
-# node_timeout = 3
-# conn_timeout = 0.5
-# allow_versions = false
-# auto_create_account_prefix = .
-#
-# Configure parameter for creating specific server
-# To handle all verbs, including replication verbs, do not specify
-# "replication_server" (this is the default). To only handle replication,
-# set to a True value (e.g. "True" or "1"). To handle only non-replication
-# verbs, set to "False". Unless you have a separate replication network, you
-# should not specify any value for "replication_server".
-# replication_server = false
-
-[filter:healthcheck]
-use = egg:swift#healthcheck
-# An optional filesystem path, which if present, will cause the healthcheck
-# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
-# disable_path =
-
-[filter:recon]
-use = egg:swift#recon
-recon_cache_path = /var/cache/swift
-
-[container-replicator]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = container-replicator
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# Maximum number of database rows that will be sync'd in a single HTTP
-# replication request. Databases with less than or equal to this number of
-# differing rows will always be sync'd using an HTTP replication request rather
-# than using rsync.
-# per_diff = 1000
-#
-# Maximum number of HTTP replication requests attempted on each replication
-# pass for any one container. This caps how long the replicator will spend
-# trying to sync a given database per pass so the other databases don't get
-# starved.
-# max_diffs = 100
-#
-# Number of replication workers to spawn.
-# concurrency = 8
-#
-# Time in seconds to wait between replication passes
-# interval = 30
-# run_pause is deprecated, use interval instead
-# run_pause = 30
-#
-# node_timeout = 10
-# conn_timeout = 0.5
-#
-# The replicator also performs reclamation
-# reclaim_age = 604800
-#
-# Allow rsync to compress data which is transmitted to destination node
-# during sync. However, this is applicable only when destination node is in
-# a different region than the local one.
-# rsync_compress = no
-#
-# Format of the rysnc module where the replicator will send data. See
-# etc/rsyncd.conf-sample for some usage examples.
-# rsync_module = {replication_ip}::container
-#
-# recon_cache_path = /var/cache/swift
-
-[container-updater]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = container-updater
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# interval = 300
-# concurrency = 4
-# node_timeout = 3
-# conn_timeout = 0.5
-#
-# slowdown will sleep that amount between containers
-# slowdown = 0.01
-#
-# Seconds to suppress updating an account that has generated an error
-# account_suppression_time = 60
-#
-# recon_cache_path = /var/cache/swift
-
-[container-auditor]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = container-auditor
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# Will audit each container at most once per interval
-# interval = 1800
-#
-# containers_per_second = 200
-# recon_cache_path = /var/cache/swift
-
-[container-sync]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = container-sync
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# If you need to use an HTTP Proxy, set it here; defaults to no proxy.
-# You can also set this to a comma separated list of HTTP Proxies and they will
-# be randomly used (simple load balancing).
-# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888
-#
-# Will sync each container at most once per interval
-# interval = 300
-#
-# Maximum amount of time to spend syncing each container per pass
-# container_time = 60
-#
-# Maximum amount of time in seconds for the connection attempt
-# conn_timeout = 5
-# Server errors from requests will be retried by default
-# request_tries = 3
-#
-# Internal client config file path
-# internal_client_conf_path = /etc/swift/internal-client.conf
-
-# Note: Put it at the beginning of the pipeline to profile all middleware. But
-# it is safer to put this after healthcheck.
-[filter:xprofile]
-use = egg:swift#xprofile
-# This option enable you to switch profilers which should inherit from python
-# standard profiler. Currently the supported value can be 'cProfile',
-# 'eventlet.green.profile' etc.
-# profile_module = eventlet.green.profile
-#
-# This prefix will be used to combine process ID and timestamp to name the
-# profile data file.  Make sure the executing user has permission to write
-# into this path (missing path segments will be created, if necessary).
-# If you enable profiling in more than one type of daemon, you must override
-# it with an unique value like: /var/log/swift/profile/container.profile
-# log_filename_prefix = /tmp/log/swift/profile/default.profile
-#
-# the profile data will be dumped to local disk based on above naming rule
-# in this interval.
-# dump_interval = 5.0
-#
-# Be careful, this option will enable profiler to dump data into the file with
-# time stamp which means there will be lots of files piled up in the directory.
-# dump_timestamp = false
-#
-# This is the path of the URL to access the mini web UI.
-# path = /__profile__
-#
-# Clear the data when the wsgi server shutdown.
-# flush_at_shutdown = false
-#
-# unwind the iterator of applications
-# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/object-server.conf b/deploy/adapters/ansible/roles/swift/templates/object-server.conf
deleted file mode 100644
index effd4f22..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/object-server.conf
+++ /dev/null
@@ -1,347 +0,0 @@
-[DEFAULT]
-bind_ip = {{ internal_ip }}
-bind_port = 6000
-# bind_timeout = 30
-# backlog = 4096
-user = swift
-swift_dir = /etc/swift
-devices = /srv/node
-mount_check = true
-# disable_fallocate = false
-# expiring_objects_container_divisor = 86400
-# expiring_objects_account_name = expiring_objects
-#
-# Use an integer to override the number of pre-forked processes that will
-# accept connections.  NOTE: if servers_per_port is set, this setting is
-# ignored.
-# workers = auto
-#
-# Make object-server run this many worker processes per unique port of
-# "local" ring devices across all storage policies.  This can help provide
-# the isolation of threads_per_disk without the severe overhead.  The default
-# value of 0 disables this feature.
-# servers_per_port = 0
-#
-# Maximum concurrent requests per worker
-# max_clients = 1024
-#
-# You can specify default log routing here if you want:
-# log_name = swift
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-# The following caps the length of log lines to the value given; no limit if
-# set to 0, the default.
-# log_max_line_length = 0
-#
-# comma separated list of functions to call to setup custom log handlers.
-# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
-# adapted_logger
-# log_custom_handlers =
-#
-# If set, log_udp_host will override log_address
-# log_udp_host =
-# log_udp_port = 514
-#
-# You can enable StatsD logging here:
-# log_statsd_host =
-# log_statsd_port = 8125
-# log_statsd_default_sample_rate = 1.0
-# log_statsd_sample_rate_factor = 1.0
-# log_statsd_metric_prefix =
-#
-# eventlet_debug = false
-#
-# You can set fallocate_reserve to the number of bytes you'd like fallocate to
-# reserve, whether there is space for the given file size or not.
-# fallocate_reserve = 0
-#
-# Time to wait while attempting to connect to another backend node.
-# conn_timeout = 0.5
-# Time to wait while sending each chunk of data to another backend node.
-# node_timeout = 3
-# Time to wait while sending a container update on object update.
-# container_update_timeout = 1.0
-# Time to wait while receiving each chunk of data from a client or another
-# backend node.
-# client_timeout = 60
-#
-# network_chunk_size = 65536
-# disk_chunk_size = 65536
-
-[pipeline:main]
-pipeline = healthcheck recon object-server
-
-[app:object-server]
-use = egg:swift#object
-# You can override the default log routing for this app here:
-# set log_name = object-server
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_requests = true
-# set log_address = /dev/log
-#
-# max_upload_time = 86400
-#
-# slow is the total amount of seconds an object PUT/DELETE request takes at
-# least. If it is faster, the object server will sleep this amount of time minus
-# the already passed transaction time.  This is only useful for simulating slow
-# devices on storage nodes during testing and development.
-# slow = 0
-#
-# Objects smaller than this are not evicted from the buffercache once read
-# keep_cache_size = 5242880
-#
-# If true, objects for authenticated GET requests may be kept in buffer cache
-# if small enough
-# keep_cache_private = false
-#
-# on PUTs, sync data every n MB
-# mb_per_sync = 512
-#
-# Comma separated list of headers that can be set in metadata on an object.
-# This list is in addition to X-Object-Meta-* headers and cannot include
-# Content-Type, etag, Content-Length, or deleted
-# allowed_headers = Content-Disposition, Content-Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object
-#
-# auto_create_account_prefix = .
-#
-# A value of 0 means "don't use thread pools". A reasonable starting point is
-# 4.
-# threads_per_disk = 0
-#
-# Configure parameter for creating specific server
-# To handle all verbs, including replication verbs, do not specify
-# "replication_server" (this is the default). To only handle replication,
-# set to a True value (e.g. "True" or "1"). To handle only non-replication
-# verbs, set to "False". Unless you have a separate replication network, you
-# should not specify any value for "replication_server".
-# replication_server = false
-#
-# Set to restrict the number of concurrent incoming SSYNC requests
-# Set to 0 for unlimited
-# Note that SSYNC requests are only used by the object reconstructor or the
-# object replicator when configured to use ssync.
-# replication_concurrency = 4
-#
-# Restricts incoming SSYNC requests to one per device,
-# replication_currency above allowing. This can help control I/O to each
-# device, but you may wish to set this to False to allow multiple SSYNC
-# requests (up to the above replication_concurrency setting) per device.
-# replication_one_per_device = True
-#
-# Number of seconds to wait for an existing replication device lock before
-# giving up.
-# replication_lock_timeout = 15
-#
-# These next two settings control when the SSYNC subrequest handler will
-# abort an incoming SSYNC attempt. An abort will occur if there are at
-# least threshold number of failures and the value of failures / successes
-# exceeds the ratio. The defaults of 100 and 1.0 means that at least 100
-# failures have to occur and there have to be more failures than successes for
-# an abort to occur.
-# replication_failure_threshold = 100
-# replication_failure_ratio = 1.0
-#
-# Use splice() for zero-copy object GETs. This requires Linux kernel
-# version 3.0 or greater. If you set "splice = yes" but the kernel
-# does not support it, error messages will appear in the object server
-# logs at startup, but your object servers should continue to function.
-#
-# splice = no
-
-[filter:healthcheck]
-use = egg:swift#healthcheck
-# An optional filesystem path, which if present, will cause the healthcheck
-# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
-# disable_path =
-
-[filter:recon]
-use = egg:swift#recon
-recon_cache_path = /var/cache/swift
-recon_lock_path = /var/lock
-
-[object-replicator]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = object-replicator
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# daemonize = on
-#
-# Time in seconds to wait between replication passes
-# interval = 30
-# run_pause is deprecated, use interval instead
-# run_pause = 30
-#
-# concurrency = 1
-# stats_interval = 300
-#
-# default is rsync, alternative is ssync
-# sync_method = rsync
-#
-# max duration of a partition rsync
-# rsync_timeout = 900
-#
-# bandwidth limit for rsync in kB/s. 0 means unlimited
-# rsync_bwlimit = 0
-#
-# passed to rsync for io op timeout
-# rsync_io_timeout = 30
-#
-# Allow rsync to compress data which is transmitted to destination node
-# during sync. However, this is applicable only when destination node is in
-# a different region than the local one.
-# NOTE: Objects that are already compressed (for example: .tar.gz, .mp3) might
-# slow down the syncing process.
-# rsync_compress = no
-#
-# Format of the rysnc module where the replicator will send data. See
-# etc/rsyncd.conf-sample for some usage examples.
-# rsync_module = {replication_ip}::object
-#
-# node_timeout = <whatever's in the DEFAULT section or 10>
-# max duration of an http request; this is for REPLICATE finalization calls and
-# so should be longer than node_timeout
-# http_timeout = 60
-#
-# attempts to kill all workers if nothing replicates for lockup_timeout seconds
-# lockup_timeout = 1800
-#
-# The replicator also performs reclamation
-# reclaim_age = 604800
-#
-# ring_check_interval = 15
-# recon_cache_path = /var/cache/swift
-#
-# limits how long rsync error log lines are
-# 0 means to log the entire line
-# rsync_error_log_line_length = 0
-#
-# handoffs_first and handoff_delete are options for a special case
-# such as disk full in the cluster. These two options SHOULD NOT BE
-# CHANGED, except for such an extreme situations. (e.g. disks filled up
-# or are about to fill up. Anyway, DO NOT let your drives fill up)
-# handoffs_first is the flag to replicate handoffs prior to canonical
-# partitions. It allows to force syncing and deleting handoffs quickly.
-# If set to a True value(e.g. "True" or "1"), partitions
-# that are not supposed to be on the node will be replicated first.
-# handoffs_first = False
-#
-# handoff_delete is the number of replicas which are ensured in swift.
-# If the number less than the number of replicas is set, object-replicator
-# could delete local handoffs even if all replicas are not ensured in the
-# cluster. Object-replicator would remove local handoff partition directories
-# after syncing partition when the number of successful responses is greater
-# than or equal to this number. By default(auto), handoff partitions will be
-# removed  when it has successfully replicated to all the canonical nodes.
-# handoff_delete = auto
-
-[object-reconstructor]
-# You can override the default log routing for this app here (don't use set!):
-# Unless otherwise noted, each setting below has the same meaning as described
-# in the [object-replicator] section, however these settings apply to the EC
-# reconstructor
-#
-# log_name = object-reconstructor
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# daemonize = on
-#
-# Time in seconds to wait between reconstruction passes
-# interval = 30
-# run_pause is deprecated, use interval instead
-# run_pause = 30
-#
-# concurrency = 1
-# stats_interval = 300
-# node_timeout = 10
-# http_timeout = 60
-# lockup_timeout = 1800
-# reclaim_age = 604800
-# ring_check_interval = 15
-# recon_cache_path = /var/cache/swift
-# handoffs_first = False
-
-[object-updater]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = object-updater
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# interval = 300
-# concurrency = 1
-# node_timeout = <whatever's in the DEFAULT section or 10>
-# slowdown will sleep that amount between objects
-# slowdown = 0.01
-#
-# recon_cache_path = /var/cache/swift
-
-[object-auditor]
-# You can override the default log routing for this app here (don't use set!):
-# log_name = object-auditor
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_address = /dev/log
-#
-# Time in seconds to wait between auditor passes
-# interval = 30
-#
-# You can set the disk chunk size that the auditor uses making it larger if
-# you like for more efficient local auditing of larger objects
-# disk_chunk_size = 65536
-# files_per_second = 20
-# concurrency = 1
-# bytes_per_second = 10000000
-# log_time = 3600
-# zero_byte_files_per_second = 50
-# recon_cache_path = /var/cache/swift
-
-# Takes a comma separated list of ints. If set, the object auditor will
-# increment a counter for every object whose size is <= to the given break
-# points and report the result after a full scan.
-# object_size_stats =
-
-# The auditor will cleanup old rsync tempfiles after they are "old
-# enough" to delete.  You can configure the time elapsed in seconds
-# before rsync tempfiles will be unlinked, or the default value of
-# "auto" try to use object-replicator's rsync_timeout + 900 and fallback
-# to 86400 (1 day).
-# rsync_tempfile_timeout = auto
-
-# Note: Put it at the beginning of the pipleline to profile all middleware. But
-# it is safer to put this after healthcheck.
-[filter:xprofile]
-use = egg:swift#xprofile
-# This option enable you to switch profilers which should inherit from python
-# standard profiler. Currently the supported value can be 'cProfile',
-# 'eventlet.green.profile' etc.
-# profile_module = eventlet.green.profile
-#
-# This prefix will be used to combine process ID and timestamp to name the
-# profile data file.  Make sure the executing user has permission to write
-# into this path (missing path segments will be created, if necessary).
-# If you enable profiling in more than one type of daemon, you must override
-# it with an unique value like: /var/log/swift/profile/object.profile
-# log_filename_prefix = /tmp/log/swift/profile/default.profile
-#
-# the profile data will be dumped to local disk based on above naming rule
-# in this interval.
-# dump_interval = 5.0
-#
-# Be careful, this option will enable profiler to dump data into the file with
-# time stamp which means there will be lots of files piled up in the directory.
-# dump_timestamp = false
-#
-# This is the path of the URL to access the mini web UI.
-# path = /__profile__
-#
-# Clear the data when the wsgi server shutdown.
-# flush_at_shutdown = false
-#
-# unwind the iterator of applications
-# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf b/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf
deleted file mode 100644
index b76796cf..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf
+++ /dev/null
@@ -1,764 +0,0 @@
-{% set memcached_servers = [] %}
-{% for host in haproxy_hosts.values() %}
-{% set _ = memcached_servers.append('%s:11211'% host) %}
-{% endfor %}
-{% set memcached_servers = memcached_servers|join(',') %}
-[DEFAULT]
-bind_ip = {{ internal_ip }}
-bind_port = 8080
-# bind_timeout = 30
-# backlog = 4096
-swift_dir = /etc/swift
-user = swift
-
-# Enables exposing configuration settings via HTTP GET /info.
-# expose_info = true
-
-# Key to use for admin calls that are HMAC signed.  Default is empty,
-# which will disable admin calls to /info.
-# admin_key = secret_admin_key
-#
-# Allows the ability to withhold sections from showing up in the public calls
-# to /info.  You can withhold subsections by separating the dict level with a
-# ".".  The following would cause the sections 'container_quotas' and 'tempurl'
-# to not be listed, and the key max_failed_deletes would be removed from
-# bulk_delete.  Default value is 'swift.valid_api_versions' which allows all
-# registered features to be listed via HTTP GET /info except
-# swift.valid_api_versions information
-# disallowed_sections = swift.valid_api_versions, container_quotas, tempurl
-
-# Use an integer to override the number of pre-forked processes that will
-# accept connections.  Should default to the number of effective cpu
-# cores in the system.  It's worth noting that individual workers will
-# use many eventlet co-routines to service multiple concurrent requests.
-# workers = auto
-#
-# Maximum concurrent requests per worker
-# max_clients = 1024
-#
-# Set the following two lines to enable SSL. This is for testing only.
-# cert_file = /etc/swift/proxy.crt
-# key_file = /etc/swift/proxy.key
-#
-# expiring_objects_container_divisor = 86400
-# expiring_objects_account_name = expiring_objects
-#
-# You can specify default log routing here if you want:
-# log_name = swift
-# log_facility = LOG_LOCAL0
-# log_level = INFO
-# log_headers = false
-# log_address = /dev/log
-# The following caps the length of log lines to the value given; no limit if
-# set to 0, the default.
-# log_max_line_length = 0
-#
-# This optional suffix (default is empty) that would be appended to the swift transaction
-# id allows one to easily figure out from which cluster that X-Trans-Id belongs to.
-# This is very useful when one is managing more than one swift cluster.
-# trans_id_suffix =
-#
-# comma separated list of functions to call to setup custom log handlers.
-# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
-# adapted_logger
-# log_custom_handlers =
-#
-# If set, log_udp_host will override log_address
-# log_udp_host =
-# log_udp_port = 514
-#
-# You can enable StatsD logging here:
-# log_statsd_host =
-# log_statsd_port = 8125
-# log_statsd_default_sample_rate = 1.0
-# log_statsd_sample_rate_factor = 1.0
-# log_statsd_metric_prefix =
-#
-# Use a comma separated list of full url (http://foo.bar:1234,https://foo.bar)
-# cors_allow_origin =
-# strict_cors_mode = True
-#
-# client_timeout = 60
-# eventlet_debug = false
-
-[pipeline:main]
-# This sample pipeline uses tempauth and is used for SAIO dev work and
-# testing. See below for a pipeline using keystone.
-#pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk tempurl ratelimit tempauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
-pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk ratelimit authtoken keystoneauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
-
-# The following pipeline shows keystone integration. Comment out the one
-# above and uncomment this one. Additional steps for integrating keystone are
-# covered further below in the filter sections for authtoken and keystoneauth.
-#pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk tempurl ratelimit authtoken keystoneauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
-
-[app:proxy-server]
-use = egg:swift#proxy
-account_autocreate = True
-# You can override the default log routing for this app here:
-# set log_name = proxy-server
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_address = /dev/log
-#
-# log_handoffs = true
-# recheck_account_existence = 60
-# recheck_container_existence = 60
-# object_chunk_size = 65536
-# client_chunk_size = 65536
-#
-# How long the proxy server will wait on responses from the a/c/o servers.
-# node_timeout = 10
-#
-# How long the proxy server will wait for an initial response and to read a
-# chunk of data from the object servers while serving GET / HEAD requests.
-# Timeouts from these requests can be recovered from so setting this to
-# something lower than node_timeout would provide quicker error recovery
-# while allowing for a longer timeout for non-recoverable requests (PUTs).
-# Defaults to node_timeout, should be overriden if node_timeout is set to a
-# high number to prevent client timeouts from firing before the proxy server
-# has a chance to retry.
-# recoverable_node_timeout = node_timeout
-#
-# conn_timeout = 0.5
-#
-# How long to wait for requests to finish after a quorum has been established.
-# post_quorum_timeout = 0.5
-#
-# How long without an error before a node's error count is reset. This will
-# also be how long before a node is reenabled after suppression is triggered.
-# error_suppression_interval = 60
-#
-# How many errors can accumulate before a node is temporarily ignored.
-# error_suppression_limit = 10
-#
-# If set to 'true' any authorized user may create and delete accounts; if
-# 'false' no one, even authorized, can.
-# allow_account_management = false
-#
-# Set object_post_as_copy = false to turn on fast posts where only the metadata
-# changes are stored anew and the original data file is kept in place. This
-# makes for quicker posts.
-# object_post_as_copy = true
-#
-# If set to 'true' authorized accounts that do not yet exist within the Swift
-# cluster will be automatically created.
-# account_autocreate = false
-#
-# If set to a positive value, trying to create a container when the account
-# already has at least this maximum containers will result in a 403 Forbidden.
-# Note: This is a soft limit, meaning a user might exceed the cap for
-# recheck_account_existence before the 403s kick in.
-# max_containers_per_account = 0
-#
-# This is a comma separated list of account hashes that ignore the
-# max_containers_per_account cap.
-# max_containers_whitelist =
-#
-# Comma separated list of Host headers to which the proxy will deny requests.
-# deny_host_headers =
-#
-# Prefix used when automatically creating accounts.
-# auto_create_account_prefix = .
-#
-# Depth of the proxy put queue.
-# put_queue_depth = 10
-#
-# Storage nodes can be chosen at random (shuffle), by using timing
-# measurements (timing), or by using an explicit match (affinity).
-# Using timing measurements may allow for lower overall latency, while
-# using affinity allows for finer control. In both the timing and
-# affinity cases, equally-sorting nodes are still randomly chosen to
-# spread load.
-# The valid values for sorting_method are "affinity", "shuffle", or "timing".
-# sorting_method = shuffle
-#
-# If the "timing" sorting_method is used, the timings will only be valid for
-# the number of seconds configured by timing_expiry.
-# timing_expiry = 300
-#
-# By default on a GET/HEAD swift will connect to a storage node one at a time
-# in a single thread. There is smarts in the order they are hit however. If you
-# turn on concurrent_gets below, then replica count threads will be used.
-# With addition of the concurrency_timeout option this will allow swift to send
-# out GET/HEAD requests to the storage nodes concurrently and answer with the
-# first to respond. With an EC policy the parameter only affects HEAD requests.
-# concurrent_gets = off
-#
-# This parameter controls how long to wait before firing off the next
-# concurrent_get thread. A value of 0 would be fully concurrent, any other
-# number will stagger the firing of the threads. This number should be
-# between 0 and node_timeout. The default is what ever you set for the
-# conn_timeout parameter.
-# concurrency_timeout = 0.5
-#
-# Set to the number of nodes to contact for a normal request. You can use
-# '* replicas' at the end to have it use the number given times the number of
-# replicas for the ring being used for the request.
-# request_node_count = 2 * replicas
-#
-# Which backend servers to prefer on reads. Format is r<N> for region
-# N or r<N>z<M> for region N, zone M. The value after the equals is
-# the priority; lower numbers are higher priority.
-#
-# Example: first read from region 1 zone 1, then region 1 zone 2, then
-# anything in region 2, then everything else:
-# read_affinity = r1z1=100, r1z2=200, r2=300
-# Default is empty, meaning no preference.
-# read_affinity =
-#
-# Which backend servers to prefer on writes. Format is r<N> for region
-# N or r<N>z<M> for region N, zone M. If this is set, then when
-# handling an object PUT request, some number (see setting
-# write_affinity_node_count) of local backend servers will be tried
-# before any nonlocal ones.
-#
-# Example: try to write to regions 1 and 2 before writing to any other
-# nodes:
-# write_affinity = r1, r2
-# Default is empty, meaning no preference.
-# write_affinity =
-#
-# The number of local (as governed by the write_affinity setting)
-# nodes to attempt to contact first, before any non-local ones. You
-# can use '* replicas' at the end to have it use the number given
-# times the number of replicas for the ring being used for the
-# request.
-# write_affinity_node_count = 2 * replicas
-#
-# These are the headers whose values will only be shown to swift_owners. The
-# exact definition of a swift_owner is up to the auth system in use, but
-# usually indicates administrative responsibilities.
-# swift_owner_headers = x-container-read, x-container-write, x-container-sync-key, x-container-sync-to, x-account-meta-temp-url-key, x-account-meta-temp-url-key-2, x-container-meta-temp-url-key, x-container-meta-temp-url-key-2, x-account-access-control
-
-[filter:tempauth]
-use = egg:swift#tempauth
-# You can override the default log routing for this filter here:
-# set log_name = tempauth
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-#
-# The reseller prefix will verify a token begins with this prefix before even
-# attempting to validate it. Also, with authorization, only Swift storage
-# accounts with this prefix will be authorized by this middleware. Useful if
-# multiple auth systems are in use for one Swift cluster.
-# The reseller_prefix may contain a comma separated list of items. The first
-# item is used for the token as mentioned above. If second and subsequent
-# items exist, the middleware will handle authorization for an account with
-# that prefix. For example, for prefixes "AUTH, SERVICE", a path of
-# /v1/SERVICE_account is handled the same as /v1/AUTH_account. If an empty
-# (blank) reseller prefix is required, it must be first in the list. Two
-# single quote characters indicates an empty (blank) reseller prefix.
-# reseller_prefix = AUTH
-
-#
-# The require_group parameter names a group that must be presented by
-# either X-Auth-Token or X-Service-Token. Usually this parameter is
-# used only with multiple reseller prefixes (e.g., SERVICE_require_group=blah).
-# By default, no group is needed. Do not use .admin.
-# require_group =
-
-# The auth prefix will cause requests beginning with this prefix to be routed
-# to the auth subsystem, for granting tokens, etc.
-# auth_prefix = /auth/
-# token_life = 86400
-#
-# This allows middleware higher in the WSGI pipeline to override auth
-# processing, useful for middleware such as tempurl and formpost. If you know
-# you're not going to use such middleware and you want a bit of extra security,
-# you can set this to false.
-# allow_overrides = true
-#
-# This specifies what scheme to return with storage urls:
-# http, https, or default (chooses based on what the server is running as)
-# This can be useful with an SSL load balancer in front of a non-SSL server.
-# storage_url_scheme = default
-#
-# Lastly, you need to list all the accounts/users you want here. The format is:
-#   user_<account>_<user> = <key> [group] [group] [...] [storage_url]
-# or if you want underscores in <account> or <user>, you can base64 encode them
-# (with no equal signs) and use this format:
-#   user64_<account_b64>_<user_b64> = <key> [group] [group] [...] [storage_url]
-# There are special groups of:
-#   .reseller_admin = can do anything to any account for this auth
-#   .admin = can do anything within the account
-# If neither of these groups are specified, the user can only access containers
-# that have been explicitly allowed for them by a .admin or .reseller_admin.
-# The trailing optional storage_url allows you to specify an alternate url to
-# hand back to the user upon authentication. If not specified, this defaults to
-# $HOST/v1/<reseller_prefix>_<account> where $HOST will do its best to resolve
-# to what the requester would need to use to reach this host.
-# Here are example entries, required for running the tests:
-user_admin_admin = admin .admin .reseller_admin
-user_test_tester = testing .admin
-user_test2_tester2 = testing2 .admin
-user_test_tester3 = testing3
-user_test5_tester5 = testing5 service
-
-# To enable Keystone authentication you need to have the auth token
-# middleware first to be configured. Here is an example below, please
-# refer to the keystone's documentation for details about the
-# different settings.
-#
-# You'll also need to have the keystoneauth middleware enabled and have it in
-# your main pipeline, as show in the sample pipeline at the top of this file.
-#
-# Following parameters are known to work with keystonemiddleware v2.3.0
-# (above v2.0.0), but checking the latest information in the wiki page[1]
-# is recommended.
-# 1. http://docs.openstack.org/developer/keystonemiddleware/middlewarearchitecture.html#configuration
-#
-[filter:authtoken]
-paste.filter_factory = keystonemiddleware.auth_token:filter_factory
-auth_uri = http://{{ internal_vip.ip }}:5000
-auth_url = http://{{ internal_vip.ip }}:35357
-identity_uri = http://{{ internal_vip.ip }}:35357
-memcached_servers = {{ memcached_servers }}
-#auth_plugin = password
-auth_type = password
-project_domain_id = default
-user_domain_id = default
-project_name = service
-username = swift
-password = {{ CINDER_PASS }}
-delay_auth_decision = True
-#
-# delay_auth_decision defaults to False, but leaving it as false will
-# prevent other auth systems, staticweb, tempurl, formpost, and ACLs from
-# working. This value must be explicitly set to True.
-# delay_auth_decision = False
-#
-# cache = swift.cache
-# include_service_catalog = False
-#
-[filter:keystoneauth]
-use = egg:swift#keystoneauth
-operator_roles = admin,user
-# The reseller_prefix option lists account namespaces that this middleware is
-# responsible for. The prefix is placed before the Keystone project id.
-# For example, for project 12345678, and prefix AUTH, the account is
-# named AUTH_12345678 (i.e., path is /v1/AUTH_12345678/...).
-# Several prefixes are allowed by specifying a comma-separated list
-# as in: "reseller_prefix = AUTH, SERVICE". The empty string indicates a
-# single blank/empty prefix. If an empty prefix is required in a list of
-# prefixes, a value of '' (two single quote characters) indicates a
-# blank/empty prefix. Except for the blank/empty prefix, an underscore ('_')
-# character is appended to the value unless already present.
-# reseller_prefix = AUTH
-#
-# The user must have at least one role named by operator_roles on a
-# project in order to create, delete and modify containers and objects
-# and to set and read privileged headers such as ACLs.
-# If there are several reseller prefix items, you can prefix the
-# parameter so it applies only to those accounts (for example
-# the parameter SERVICE_operator_roles applies to the /v1/SERVICE_<project>
-# path). If you omit the prefix, the option applies to all reseller
-# prefix items. For the blank/empty prefix, prefix with '' (do not put
-# underscore after the two single quote characters).
-# operator_roles = admin, swiftoperator
-#
-# The reseller admin role has the ability to create and delete accounts
-# reseller_admin_role = ResellerAdmin
-#
-# This allows middleware higher in the WSGI pipeline to override auth
-# processing, useful for middleware such as tempurl and formpost. If you know
-# you're not going to use such middleware and you want a bit of extra security,
-# you can set this to false.
-# allow_overrides = true
-#
-# If the service_roles parameter is present, an X-Service-Token must be
-# present in the request that when validated, grants at least one role listed
-# in the parameter. The X-Service-Token may be scoped to any project.
-# If there are several reseller prefix items, you can prefix the
-# parameter so it applies only to those accounts (for example
-# the parameter SERVICE_service_roles applies to the /v1/SERVICE_<project>
-# path). If you omit the prefix, the option applies to all reseller
-# prefix items. For the blank/empty prefix, prefix with '' (do not put
-# underscore after the two single quote characters).
-# By default, no service_roles are required.
-# service_roles =
-#
-# For backwards compatibility, keystoneauth will match names in cross-tenant
-# access control lists (ACLs) when both the requesting user and the tenant
-# are in the default domain i.e the domain to which existing tenants are
-# migrated. The default_domain_id value configured here should be the same as
-# the value used during migration of tenants to keystone domains.
-# default_domain_id = default
-#
-# For a new installation, or an installation in which keystone projects may
-# move between domains, you should disable backwards compatible name matching
-# in ACLs by setting allow_names_in_acls to false:
-# allow_names_in_acls = true
-
-[filter:healthcheck]
-use = egg:swift#healthcheck
-# An optional filesystem path, which if present, will cause the healthcheck
-# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE".
-# This facility may be used to temporarily remove a Swift node from a load
-# balancer pool during maintenance or upgrade (remove the file to allow the
-# node back into the load balancer pool).
-# disable_path =
-
-[filter:cache]
-use = egg:swift#memcache
-memcache_servers = {{ memcached_servers }}
-# You can override the default log routing for this filter here:
-# set log_name = cache
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-#
-# If not set here, the value for memcache_servers will be read from
-# memcache.conf (see memcache.conf-sample) or lacking that file, it will
-# default to the value below. You can specify multiple servers separated with
-# commas, as in: 10.1.2.3:11211,10.1.2.4:11211 (IPv6 addresses must
-# follow rfc3986 section-3.2.2, i.e. [::1]:11211)
-# memcache_servers = 127.0.0.1:11211
-#
-# Sets how memcache values are serialized and deserialized:
-# 0 = older, insecure pickle serialization
-# 1 = json serialization but pickles can still be read (still insecure)
-# 2 = json serialization only (secure and the default)
-# If not set here, the value for memcache_serialization_support will be read
-# from /etc/swift/memcache.conf (see memcache.conf-sample).
-# To avoid an instant full cache flush, existing installations should
-# upgrade with 0, then set to 1 and reload, then after some time (24 hours)
-# set to 2 and reload.
-# In the future, the ability to use pickle serialization will be removed.
-# memcache_serialization_support = 2
-#
-# Sets the maximum number of connections to each memcached server per worker
-# memcache_max_connections = 2
-#
-# More options documented in memcache.conf-sample
-
-[filter:ratelimit]
-use = egg:swift#ratelimit
-# You can override the default log routing for this filter here:
-# set log_name = ratelimit
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-#
-# clock_accuracy should represent how accurate the proxy servers' system clocks
-# are with each other. 1000 means that all the proxies' clock are accurate to
-# each other within 1 millisecond.  No ratelimit should be higher than the
-# clock accuracy.
-# clock_accuracy = 1000
-#
-# max_sleep_time_seconds = 60
-#
-# log_sleep_time_seconds of 0 means disabled
-# log_sleep_time_seconds = 0
-#
-# allows for slow rates (e.g. running up to 5 sec's behind) to catch up.
-# rate_buffer_seconds = 5
-#
-# account_ratelimit of 0 means disabled
-# account_ratelimit = 0
-
-# DEPRECATED- these will continue to work but will be replaced
-# by the X-Account-Sysmeta-Global-Write-Ratelimit flag.
-# Please see ratelimiting docs for details.
-# these are comma separated lists of account names
-# account_whitelist = a,b
-# account_blacklist = c,d
-
-# with container_limit_x = r
-# for containers of size x limit write requests per second to r.  The container
-# rate will be linearly interpolated from the values given. With the values
-# below, a container of size 5 will get a rate of 75.
-# container_ratelimit_0 = 100
-# container_ratelimit_10 = 50
-# container_ratelimit_50 = 20
-
-# Similarly to the above container-level write limits, the following will limit
-# container GET (listing) requests.
-# container_listing_ratelimit_0 = 100
-# container_listing_ratelimit_10 = 50
-# container_listing_ratelimit_50 = 20
-
-[filter:domain_remap]
-use = egg:swift#domain_remap
-# You can override the default log routing for this filter here:
-# set log_name = domain_remap
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-#
-# storage_domain = example.com
-# path_root = v1
-
-# Browsers can convert a host header to lowercase, so check that reseller
-# prefix on the account is the correct case. This is done by comparing the
-# items in the reseller_prefixes config option to the found prefix. If they
-# match except for case, the item from reseller_prefixes will be used
-# instead of the found reseller prefix. When none match, the default reseller
-# prefix is used. When no default reseller prefix is configured, any request
-# with an account prefix not in that list will be ignored by this middleware.
-# reseller_prefixes = AUTH
-# default_reseller_prefix =
-
-[filter:catch_errors]
-use = egg:swift#catch_errors
-# You can override the default log routing for this filter here:
-# set log_name = catch_errors
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-
-[filter:cname_lookup]
-# Note: this middleware requires python-dnspython
-use = egg:swift#cname_lookup
-# You can override the default log routing for this filter here:
-# set log_name = cname_lookup
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-#
-# Specify the storage_domain that match your cloud, multiple domains
-# can be specified separated by a comma
-# storage_domain = example.com
-#
-# lookup_depth = 1
-
-# Note: Put staticweb just after your auth filter(s) in the pipeline
-[filter:staticweb]
-use = egg:swift#staticweb
-# You can override the default log routing for this filter here:
-# set log_name = staticweb
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-
-# Note: Put tempurl before dlo, slo and your auth filter(s) in the pipeline
-[filter:tempurl]
-use = egg:swift#tempurl
-# The methods allowed with Temp URLs.
-# methods = GET HEAD PUT POST DELETE
-#
-# The headers to remove from incoming requests. Simply a whitespace delimited
-# list of header names and names can optionally end with '*' to indicate a
-# prefix match. incoming_allow_headers is a list of exceptions to these
-# removals.
-# incoming_remove_headers = x-timestamp
-#
-# The headers allowed as exceptions to incoming_remove_headers. Simply a
-# whitespace delimited list of header names and names can optionally end with
-# '*' to indicate a prefix match.
-# incoming_allow_headers =
-#
-# The headers to remove from outgoing responses. Simply a whitespace delimited
-# list of header names and names can optionally end with '*' to indicate a
-# prefix match. outgoing_allow_headers is a list of exceptions to these
-# removals.
-# outgoing_remove_headers = x-object-meta-*
-#
-# The headers allowed as exceptions to outgoing_remove_headers. Simply a
-# whitespace delimited list of header names and names can optionally end with
-# '*' to indicate a prefix match.
-# outgoing_allow_headers = x-object-meta-public-*
-
-# Note: Put formpost just before your auth filter(s) in the pipeline
-[filter:formpost]
-use = egg:swift#formpost
-
-# Note: Just needs to be placed before the proxy-server in the pipeline.
-[filter:name_check]
-use = egg:swift#name_check
-# forbidden_chars = '"`<>
-# maximum_length = 255
-# forbidden_regexp = /\./|/\.\./|/\.$|/\.\.$
-
-[filter:list-endpoints]
-use = egg:swift#list_endpoints
-# list_endpoints_path = /endpoints/
-
-[filter:proxy-logging]
-use = egg:swift#proxy_logging
-# If not set, logging directives from [DEFAULT] without "access_" will be used
-# access_log_name = swift
-# access_log_facility = LOG_LOCAL0
-# access_log_level = INFO
-# access_log_address = /dev/log
-#
-# If set, access_log_udp_host will override access_log_address
-# access_log_udp_host =
-# access_log_udp_port = 514
-#
-# You can use log_statsd_* from [DEFAULT] or override them here:
-# access_log_statsd_host =
-# access_log_statsd_port = 8125
-# access_log_statsd_default_sample_rate = 1.0
-# access_log_statsd_sample_rate_factor = 1.0
-# access_log_statsd_metric_prefix =
-# access_log_headers = false
-#
-# If access_log_headers is True and access_log_headers_only is set only
-# these headers are logged. Multiple headers can be defined as comma separated
-# list like this: access_log_headers_only = Host, X-Object-Meta-Mtime
-# access_log_headers_only =
-#
-# By default, the X-Auth-Token is logged. To obscure the value,
-# set reveal_sensitive_prefix to the number of characters to log.
-# For example, if set to 12, only the first 12 characters of the
-# token appear in the log. An unauthorized access of the log file
-# won't allow unauthorized usage of the token. However, the first
-# 12 or so characters is unique enough that you can trace/debug
-# token usage. Set to 0 to suppress the token completely (replaced
-# by '...' in the log).
-# Note: reveal_sensitive_prefix will not affect the value
-# logged with access_log_headers=True.
-# reveal_sensitive_prefix = 16
-#
-# What HTTP methods are allowed for StatsD logging (comma-sep); request methods
-# not in this list will have "BAD_METHOD" for the <verb> portion of the metric.
-# log_statsd_valid_http_methods = GET,HEAD,POST,PUT,DELETE,COPY,OPTIONS
-#
-# Note: The double proxy-logging in the pipeline is not a mistake. The
-# left-most proxy-logging is there to log requests that were handled in
-# middleware and never made it through to the right-most middleware (and
-# proxy server). Double logging is prevented for normal requests. See
-# proxy-logging docs.
-
-# Note: Put before both ratelimit and auth in the pipeline.
-[filter:bulk]
-use = egg:swift#bulk
-# max_containers_per_extraction = 10000
-# max_failed_extractions = 1000
-# max_deletes_per_request = 10000
-# max_failed_deletes = 1000
-
-# In order to keep a connection active during a potentially long bulk request,
-# Swift may return whitespace prepended to the actual response body. This
-# whitespace will be yielded no more than every yield_frequency seconds.
-# yield_frequency = 10
-
-# Note: The following parameter is used during a bulk delete of objects and
-# their container. This would frequently fail because it is very likely
-# that all replicated objects have not been deleted by the time the middleware got a
-# successful response. It can be configured the number of retries. And the
-# number of seconds to wait between each retry will be 1.5**retry
-
-# delete_container_retry_count = 0
-
-# Note: Put after auth and staticweb in the pipeline.
-[filter:slo]
-use = egg:swift#slo
-# max_manifest_segments = 1000
-# max_manifest_size = 2097152
-#
-# Rate limiting applies only to segments smaller than this size (bytes).
-# rate_limit_under_size = 1048576
-#
-# Start rate-limiting SLO segment serving after the Nth small segment of a
-# segmented object.
-# rate_limit_after_segment = 10
-#
-# Once segment rate-limiting kicks in for an object, limit segments served
-# to N per second. 0 means no rate-limiting.
-# rate_limit_segments_per_sec = 1
-#
-# Time limit on GET requests (seconds)
-# max_get_time = 86400
-
-# Note: Put after auth and staticweb in the pipeline.
-# If you don't put it in the pipeline, it will be inserted for you.
-[filter:dlo]
-use = egg:swift#dlo
-# Start rate-limiting DLO segment serving after the Nth segment of a
-# segmented object.
-# rate_limit_after_segment = 10
-#
-# Once segment rate-limiting kicks in for an object, limit segments served
-# to N per second. 0 means no rate-limiting.
-# rate_limit_segments_per_sec = 1
-#
-# Time limit on GET requests (seconds)
-# max_get_time = 86400
-
-# Note: Put after auth in the pipeline.
-[filter:container-quotas]
-use = egg:swift#container_quotas
-
-# Note: Put after auth in the pipeline.
-[filter:account-quotas]
-use = egg:swift#account_quotas
-
-[filter:gatekeeper]
-use = egg:swift#gatekeeper
-# Set this to false if you want to allow clients to set arbitrary X-Timestamps
-# on uploaded objects. This may be used to preserve timestamps when migrating
-# from a previous storage system, but risks allowing users to upload
-# difficult-to-delete data.
-# shunt_inbound_x_timestamp = true
-#
-# You can override the default log routing for this filter here:
-# set log_name = gatekeeper
-# set log_facility = LOG_LOCAL0
-# set log_level = INFO
-# set log_headers = false
-# set log_address = /dev/log
-
-[filter:container_sync]
-use = egg:swift#container_sync
-# Set this to false if you want to disallow any full url values to be set for
-# any new X-Container-Sync-To headers. This will keep any new full urls from
-# coming in, but won't change any existing values already in the cluster.
-# Updating those will have to be done manually, as knowing what the true realm
-# endpoint should be cannot always be guessed.
-# allow_full_urls = true
-# Set this to specify this clusters //realm/cluster as "current" in /info
-# current = //REALM/CLUSTER
-
-# Note: Put it at the beginning of the pipeline to profile all middleware. But
-# it is safer to put this after catch_errors, gatekeeper and healthcheck.
-[filter:xprofile]
-use = egg:swift#xprofile
-# This option enable you to switch profilers which should inherit from python
-# standard profiler. Currently the supported value can be 'cProfile',
-# 'eventlet.green.profile' etc.
-# profile_module = eventlet.green.profile
-#
-# This prefix will be used to combine process ID and timestamp to name the
-# profile data file.  Make sure the executing user has permission to write
-# into this path (missing path segments will be created, if necessary).
-# If you enable profiling in more than one type of daemon, you must override
-# it with an unique value like: /var/log/swift/profile/proxy.profile
-# log_filename_prefix = /tmp/log/swift/profile/default.profile
-#
-# the profile data will be dumped to local disk based on above naming rule
-# in this interval.
-# dump_interval = 5.0
-#
-# Be careful, this option will enable profiler to dump data into the file with
-# time stamp which means there will be lots of files piled up in the directory.
-# dump_timestamp = false
-#
-# This is the path of the URL to access the mini web UI.
-# path = /__profile__
-#
-# Clear the data when the wsgi server shutdown.
-# flush_at_shutdown = false
-#
-# unwind the iterator of applications
-# unwind = false
-
-# Note: Put after slo, dlo in the pipeline.
-# If you don't put it in the pipeline, it will be inserted automatically.
-[filter:versioned_writes]
-use = egg:swift#versioned_writes
-# Enables using versioned writes middleware and exposing configuration
-# settings via HTTP GET /info.
-# WARNING: Setting this option bypasses the "allow_versions" option
-# in the container configuration file, which will be eventually
-# deprecated. See documentation for more details.
-# allow_versioned_writes = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf b/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf
deleted file mode 100644
index 703c55eb..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-uid = swift
-gid = swift
-log file = /var/log/rsyncd.log
-pid file = /var/run/rsyncd.pid
-address = {{ internal_ip }}
-
-[account]
-max connections = 2
-path = /srv/node/
-read only = False
-lock file = /var/lock/account.lock
-
-[container]
-max connections = 2
-path = /srv/node/
-read only = False
-lock file = /var/lock/container.lock
-
-[object]
-max connections = 2
-path = /srv/node/
-read only = False
-lock file = /var/lock/object.lock
diff --git a/deploy/adapters/ansible/roles/swift/templates/swift.conf b/deploy/adapters/ansible/roles/swift/templates/swift.conf
deleted file mode 100644
index 9a31501b..00000000
--- a/deploy/adapters/ansible/roles/swift/templates/swift.conf
+++ /dev/null
@@ -1,183 +0,0 @@
-[swift-hash]
-
-# swift_hash_path_suffix and swift_hash_path_prefix are used as part of the
-# the hashing algorithm when determining data placement in the cluster.
-# These values should remain secret and MUST NOT change
-# once a cluster has been deployed.
-# Use only printable chars (python -c "import string; print(string.printable)")
-
-swift_hash_path_suffix = 7c6a7cd34d07aed5
-swift_hash_path_prefix = 0c4629166f4de441
-
-# storage policies are defined here and determine various characteristics
-# about how objects are stored and treated.  Policies are specified by name on
-# a per container basis.  Names are case-insensitive.  The policy index is
-# specified in the section header and is used internally.  The policy with
-# index 0 is always used for legacy containers and can be given a name for use
-# in metadata however the ring file name will always be 'object.ring.gz' for
-# backwards compatibility.  If no policies are defined a policy with index 0
-# will be automatically created for backwards compatibility and given the name
-# Policy-0.  A default policy is used when creating new containers when no
-# policy is specified in the request.  If no other policies are defined the
-# policy with index 0 will be declared the default.  If multiple policies are
-# defined you must define a policy with index 0 and you must specify a
-# default.  It is recommended you always define a section for
-# storage-policy:0. Aliases are not required when defining a storage policy.
-#
-# A 'policy_type' argument is also supported but is not mandatory.  Default
-# policy type 'replication' is used when 'policy_type' is unspecified.
-[storage-policy:0]
-name = Policy-0
-default = yes
-#policy_type = replication
-aliases = yellow, orange
-
-# the following section would declare a policy called 'silver', the number of
-# replicas will be determined by how the ring is built.  In this example the
-# 'silver' policy could have a lower or higher # of replicas than the
-# 'Policy-0' policy above.  The ring filename will be 'object-1.ring.gz'.  You
-# may only specify one storage policy section as the default.  If you changed
-# this section to specify 'silver' as the default, when a client created a new
-# container w/o a policy specified, it will get the 'silver' policy because
-# this config has specified it as the default.  However if a legacy container
-# (one created with a pre-policy version of swift) is accessed, it is known
-# implicitly to be assigned to the policy with index 0 as opposed to the
-# current default. Note that even without specifying any aliases, a policy
-# always has at least the default name stored in aliases because this field is
-# used to contain all human readable names for a storage policy.
-#
-#[storage-policy:1]
-#name = silver
-#policy_type = replication
-
-# The following declares a storage policy of type 'erasure_coding' which uses
-# Erasure Coding for data reliability. Please refer to Swift documentation for
-# details on how the 'erasure_coding' storage policy is implemented.
-#
-# Swift uses PyECLib, a Python Erasure coding API library, for encode/decode
-# operations.  Please refer to Swift documentation for details on how to
-# install PyECLib.
-#
-# When defining an EC policy, 'policy_type' needs to be 'erasure_coding' and
-# EC configuration parameters 'ec_type', 'ec_num_data_fragments' and
-# 'ec_num_parity_fragments' must be specified.  'ec_type' is chosen from the
-# list of EC backends supported by PyECLib.  The ring configured for the
-# storage policy must have it's "replica" count configured to
-# 'ec_num_data_fragments' + 'ec_num_parity_fragments' - this requirement is
-# validated when services start.  'ec_object_segment_size' is the amount of
-# data that will be buffered up before feeding a segment into the
-# encoder/decoder.  More information about these configuration options and
-# supported `ec_type` schemes is available in the Swift documentation.  Please
-# refer to Swift documentation for details on how to configure EC policies.
-#
-# The example 'deepfreeze10-4' policy defined below is a _sample_
-# configuration with an alias of 'df10-4' as well as 10 'data' and 4 'parity'
-# fragments. 'ec_type' defines the Erasure Coding scheme.
-# 'liberasurecode_rs_vand' (Reed-Solomon Vandermonde) is used as an example
-# below.
-#
-#[storage-policy:2]
-#name = deepfreeze10-4
-#aliases = df10-4
-#policy_type = erasure_coding
-#ec_type = liberasurecode_rs_vand
-#ec_num_data_fragments = 10
-#ec_num_parity_fragments = 4
-#ec_object_segment_size = 1048576
-
-
-# The swift-constraints section sets the basic constraints on data
-# saved in the swift cluster. These constraints are automatically
-# published by the proxy server in responses to /info requests.
-
-[swift-constraints]
-
-# max_file_size is the largest "normal" object that can be saved in
-# the cluster. This is also the limit on the size of each segment of
-# a "large" object when using the large object manifest support.
-# This value is set in bytes. Setting it to lower than 1MiB will cause
-# some tests to fail. It is STRONGLY recommended to leave this value at
-# the default (5 * 2**30 + 2).
-
-#max_file_size = 5368709122
-
-
-# max_meta_name_length is the max number of bytes in the utf8 encoding
-# of the name portion of a metadata header.
-
-#max_meta_name_length = 128
-
-
-# max_meta_value_length is the max number of bytes in the utf8 encoding
-# of a metadata value
-
-#max_meta_value_length = 256
-
-
-# max_meta_count is the max number of metadata keys that can be stored
-# on a single account, container, or object
-
-#max_meta_count = 90
-
-
-# max_meta_overall_size is the max number of bytes in the utf8 encoding
-# of the metadata (keys + values)
-
-#max_meta_overall_size = 4096
-
-# max_header_size is the max number of bytes in the utf8 encoding of each
-# header. Using 8192 as default because eventlet use 8192 as max size of
-# header line. This value may need to be increased when using identity
-# v3 API tokens including more than 7 catalog entries.
-# See also include_service_catalog in proxy-server.conf-sample
-# (documented in overview_auth.rst)
-
-#max_header_size = 8192
-
-
-# By default the maximum number of allowed headers depends on the number of max
-# allowed metadata settings plus a default value of 32 for regular http
-# headers.  If for some reason this is not enough (custom middleware for
-# example) it can be increased with the extra_header_count constraint.
-
-#extra_header_count = 0
-
-
-# max_object_name_length is the max number of bytes in the utf8 encoding
-# of an object name
-
-#max_object_name_length = 1024
-
-
-# container_listing_limit is the default (and max) number of items
-# returned for a container listing request
-
-#container_listing_limit = 10000
-
-
-# account_listing_limit is the default (and max) number of items returned
-# for an account listing request
-#account_listing_limit = 10000
-
-
-# max_account_name_length is the max number of bytes in the utf8 encoding
-# of an account name
-
-#max_account_name_length = 256
-
-
-# max_container_name_length is the max number of bytes in the utf8 encoding
-# of a container name
-
-#max_container_name_length = 256
-
-
-# By default all REST API calls should use "v1" or "v1.0" as the version string,
-# for example "/v1/account". This can be manually overridden to make this
-# backward-compatible, in case a different version string has been used before.
-# Use a comma-separated list in case of multiple allowed versions, for example
-# valid_api_versions = v0,v1,v2
-# This is only enforced for account, container and object requests. The allowed
-# api versions are by default excluded from /info.
-
-# valid_api_versions = v1,v1.0