master only support newton

JIRA: COMPASS-513

Remove other roles and ppa, master only support newton.

Change-Id: I47ddb16baa25902c3e05cc7f9d0d6430f5dc7e00
Signed-off-by: liyuenan <liyuenan@huawei.com>

6 files changed, 1746 insertions, 0 deletions

diff --git a/deploy/adapters/ansible/roles/swift/templates/account-server.conf b/deploy/adapters/ansible/roles/swift/templates/account-server.conf
new file mode 100644
index 00000000..ea84799f
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/account-server.conf
@@ -0,0 +1,200 @@
+[DEFAULT]
+bind_ip = {{ internal_ip }}
+bind_port = 6002
+# bind_timeout = 30
+# backlog = 4096
+user = swift
+swift_dir = /etc/swift
+devices = /srv/node
+mount_check = true
+# disable_fallocate = false
+#
+# Use an integer to override the number of pre-forked processes that will
+# accept connections.
+# workers = auto
+#
+# Maximum concurrent requests per worker
+# max_clients = 1024
+#
+# You can specify default log routing here if you want:
+# log_name = swift
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+# The following caps the length of log lines to the value given; no limit if
+# set to 0, the default.
+# log_max_line_length = 0
+#
+# comma separated list of functions to call to setup custom log handlers.
+# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
+# adapted_logger
+# log_custom_handlers =
+#
+# If set, log_udp_host will override log_address
+# log_udp_host =
+# log_udp_port = 514
+#
+# You can enable StatsD logging here:
+# log_statsd_host =
+# log_statsd_port = 8125
+# log_statsd_default_sample_rate = 1.0
+# log_statsd_sample_rate_factor = 1.0
+# log_statsd_metric_prefix =
+#
+# If you don't mind the extra disk space usage in overhead, you can turn this
+# on to preallocate disk space with SQLite databases to decrease fragmentation.
+# db_preallocation = off
+#
+# eventlet_debug = false
+#
+# You can set fallocate_reserve to the number of bytes you'd like fallocate to
+# reserve, whether there is space for the given file size or not.
+# fallocate_reserve = 0
+
+[pipeline:main]
+pipeline = healthcheck recon account-server
+
+[app:account-server]
+use = egg:swift#account
+# You can override the default log routing for this app here:
+# set log_name = account-server
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_requests = true
+# set log_address = /dev/log
+#
+# auto_create_account_prefix = .
+#
+# Configure parameter for creating specific server
+# To handle all verbs, including replication verbs, do not specify
+# "replication_server" (this is the default). To only handle replication,
+# set to a True value (e.g. "True" or "1"). To handle only non-replication
+# verbs, set to "False". Unless you have a separate replication network, you
+# should not specify any value for "replication_server". Default is empty.
+# replication_server = false
+
+[filter:healthcheck]
+use = egg:swift#healthcheck
+# An optional filesystem path, which if present, will cause the healthcheck
+# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
+# disable_path =
+
+[filter:recon]
+use = egg:swift#recon
+recon_cache_path = /var/cache/swift
+
+[account-replicator]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = account-replicator
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# Maximum number of database rows that will be sync'd in a single HTTP
+# replication request. Databases with less than or equal to this number of
+# differing rows will always be sync'd using an HTTP replication request rather
+# than using rsync.
+# per_diff = 1000
+#
+# Maximum number of HTTP replication requests attempted on each replication
+# pass for any one container. This caps how long the replicator will spend
+# trying to sync a given database per pass so the other databases don't get
+# starved.
+# max_diffs = 100
+#
+# Number of replication workers to spawn.
+# concurrency = 8
+#
+# Time in seconds to wait between replication passes
+# interval = 30
+# run_pause is deprecated, use interval instead
+# run_pause = 30
+#
+# node_timeout = 10
+# conn_timeout = 0.5
+#
+# The replicator also performs reclamation
+# reclaim_age = 604800
+#
+# Allow rsync to compress data which is transmitted to destination node
+# during sync. However, this is applicable only when destination node is in
+# a different region than the local one.
+# rsync_compress = no
+#
+# Format of the rysnc module where the replicator will send data. See
+# etc/rsyncd.conf-sample for some usage examples.
+# rsync_module = {replication_ip}::account
+#
+# recon_cache_path = /var/cache/swift
+
+[account-auditor]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = account-auditor
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# Will audit each account at most once per interval
+# interval = 1800
+#
+# accounts_per_second = 200
+# recon_cache_path = /var/cache/swift
+
+[account-reaper]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = account-reaper
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# concurrency = 25
+# interval = 3600
+# node_timeout = 10
+# conn_timeout = 0.5
+#
+# Normally, the reaper begins deleting account information for deleted accounts
+# immediately; you can set this to delay its work however. The value is in
+# seconds; 2592000 = 30 days for example.
+# delay_reaping = 0
+#
+# If the account fails to be be reaped due to a persistent error, the
+# account reaper will log a message such as:
+#     Account <name> has not been reaped since <date>
+# You can search logs for this message if space is not being reclaimed
+# after you delete account(s).
+# Default is 2592000 seconds (30 days). This is in addition to any time
+# requested by delay_reaping.
+# reap_warn_after = 2592000
+
+# Note: Put it at the beginning of the pipeline to profile all middleware. But
+# it is safer to put this after healthcheck.
+[filter:xprofile]
+use = egg:swift#xprofile
+# This option enable you to switch profilers which should inherit from python
+# standard profiler. Currently the supported value can be 'cProfile',
+# 'eventlet.green.profile' etc.
+# profile_module = eventlet.green.profile
+#
+# This prefix will be used to combine process ID and timestamp to name the
+# profile data file.  Make sure the executing user has permission to write
+# into this path (missing path segments will be created, if necessary).
+# If you enable profiling in more than one type of daemon, you must override
+# it with an unique value like: /var/log/swift/profile/account.profile
+# log_filename_prefix = /tmp/log/swift/profile/default.profile
+#
+# the profile data will be dumped to local disk based on above naming rule
+# in this interval.
+# dump_interval = 5.0
+#
+# Be careful, this option will enable profiler to dump data into the file with
+# time stamp which means there will be lots of files piled up in the directory.
+# dump_timestamp = false
+#
+# This is the path of the URL to access the mini web UI.
+# path = /__profile__
+#
+# Clear the data when the wsgi server shutdown.
+# flush_at_shutdown = false
+#
+# unwind the iterator of applications
+# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/container-server.conf b/deploy/adapters/ansible/roles/swift/templates/container-server.conf
new file mode 100644
index 00000000..88cd2ebb
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/container-server.conf
@@ -0,0 +1,229 @@
+[DEFAULT]
+bind_ip = {{ internal_ip }} 
+bind_port = 6001
+# bind_timeout = 30
+# backlog = 4096
+user = swift
+swift_dir = /etc/swift
+devices = /srv/node
+mount_check = true
+# disable_fallocate = false
+#
+# Use an integer to override the number of pre-forked processes that will
+# accept connections.
+# workers = auto
+#
+# Maximum concurrent requests per worker
+# max_clients = 1024
+#
+# This is a comma separated list of hosts allowed in the X-Container-Sync-To
+# field for containers. This is the old-style of using container sync. It is
+# strongly recommended to use the new style of a separate
+# container-sync-realms.conf -- see container-sync-realms.conf-sample
+# allowed_sync_hosts = 127.0.0.1
+#
+# You can specify default log routing here if you want:
+# log_name = swift
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+# The following caps the length of log lines to the value given; no limit if
+# set to 0, the default.
+# log_max_line_length = 0
+#
+# comma separated list of functions to call to setup custom log handlers.
+# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
+# adapted_logger
+# log_custom_handlers =
+#
+# If set, log_udp_host will override log_address
+# log_udp_host =
+# log_udp_port = 514
+#
+# You can enable StatsD logging here:
+# log_statsd_host =
+# log_statsd_port = 8125
+# log_statsd_default_sample_rate = 1.0
+# log_statsd_sample_rate_factor = 1.0
+# log_statsd_metric_prefix =
+#
+# If you don't mind the extra disk space usage in overhead, you can turn this
+# on to preallocate disk space with SQLite databases to decrease fragmentation.
+# db_preallocation = off
+#
+# eventlet_debug = false
+#
+# You can set fallocate_reserve to the number of bytes you'd like fallocate to
+# reserve, whether there is space for the given file size or not.
+# fallocate_reserve = 0
+
+[pipeline:main]
+pipeline = healthcheck recon container-server
+
+[app:container-server]
+use = egg:swift#container
+# You can override the default log routing for this app here:
+# set log_name = container-server
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_requests = true
+# set log_address = /dev/log
+#
+# node_timeout = 3
+# conn_timeout = 0.5
+# allow_versions = false
+# auto_create_account_prefix = .
+#
+# Configure parameter for creating specific server
+# To handle all verbs, including replication verbs, do not specify
+# "replication_server" (this is the default). To only handle replication,
+# set to a True value (e.g. "True" or "1"). To handle only non-replication
+# verbs, set to "False". Unless you have a separate replication network, you
+# should not specify any value for "replication_server".
+# replication_server = false
+
+[filter:healthcheck]
+use = egg:swift#healthcheck
+# An optional filesystem path, which if present, will cause the healthcheck
+# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
+# disable_path =
+
+[filter:recon]
+use = egg:swift#recon
+recon_cache_path = /var/cache/swift
+
+[container-replicator]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = container-replicator
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# Maximum number of database rows that will be sync'd in a single HTTP
+# replication request. Databases with less than or equal to this number of
+# differing rows will always be sync'd using an HTTP replication request rather
+# than using rsync.
+# per_diff = 1000
+#
+# Maximum number of HTTP replication requests attempted on each replication
+# pass for any one container. This caps how long the replicator will spend
+# trying to sync a given database per pass so the other databases don't get
+# starved.
+# max_diffs = 100
+#
+# Number of replication workers to spawn.
+# concurrency = 8
+#
+# Time in seconds to wait between replication passes
+# interval = 30
+# run_pause is deprecated, use interval instead
+# run_pause = 30
+#
+# node_timeout = 10
+# conn_timeout = 0.5
+#
+# The replicator also performs reclamation
+# reclaim_age = 604800
+#
+# Allow rsync to compress data which is transmitted to destination node
+# during sync. However, this is applicable only when destination node is in
+# a different region than the local one.
+# rsync_compress = no
+#
+# Format of the rysnc module where the replicator will send data. See
+# etc/rsyncd.conf-sample for some usage examples.
+# rsync_module = {replication_ip}::container
+#
+# recon_cache_path = /var/cache/swift
+
+[container-updater]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = container-updater
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# interval = 300
+# concurrency = 4
+# node_timeout = 3
+# conn_timeout = 0.5
+#
+# slowdown will sleep that amount between containers
+# slowdown = 0.01
+#
+# Seconds to suppress updating an account that has generated an error
+# account_suppression_time = 60
+#
+# recon_cache_path = /var/cache/swift
+
+[container-auditor]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = container-auditor
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# Will audit each container at most once per interval
+# interval = 1800
+#
+# containers_per_second = 200
+# recon_cache_path = /var/cache/swift
+
+[container-sync]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = container-sync
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# If you need to use an HTTP Proxy, set it here; defaults to no proxy.
+# You can also set this to a comma separated list of HTTP Proxies and they will
+# be randomly used (simple load balancing).
+# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888
+#
+# Will sync each container at most once per interval
+# interval = 300
+#
+# Maximum amount of time to spend syncing each container per pass
+# container_time = 60
+#
+# Maximum amount of time in seconds for the connection attempt
+# conn_timeout = 5
+# Server errors from requests will be retried by default
+# request_tries = 3
+#
+# Internal client config file path
+# internal_client_conf_path = /etc/swift/internal-client.conf
+
+# Note: Put it at the beginning of the pipeline to profile all middleware. But
+# it is safer to put this after healthcheck.
+[filter:xprofile]
+use = egg:swift#xprofile
+# This option enable you to switch profilers which should inherit from python
+# standard profiler. Currently the supported value can be 'cProfile',
+# 'eventlet.green.profile' etc.
+# profile_module = eventlet.green.profile
+#
+# This prefix will be used to combine process ID and timestamp to name the
+# profile data file.  Make sure the executing user has permission to write
+# into this path (missing path segments will be created, if necessary).
+# If you enable profiling in more than one type of daemon, you must override
+# it with an unique value like: /var/log/swift/profile/container.profile
+# log_filename_prefix = /tmp/log/swift/profile/default.profile
+#
+# the profile data will be dumped to local disk based on above naming rule
+# in this interval.
+# dump_interval = 5.0
+#
+# Be careful, this option will enable profiler to dump data into the file with
+# time stamp which means there will be lots of files piled up in the directory.
+# dump_timestamp = false
+#
+# This is the path of the URL to access the mini web UI.
+# path = /__profile__
+#
+# Clear the data when the wsgi server shutdown.
+# flush_at_shutdown = false
+#
+# unwind the iterator of applications
+# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/object-server.conf b/deploy/adapters/ansible/roles/swift/templates/object-server.conf
new file mode 100644
index 00000000..effd4f22
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/object-server.conf
@@ -0,0 +1,347 @@
+[DEFAULT]
+bind_ip = {{ internal_ip }}
+bind_port = 6000
+# bind_timeout = 30
+# backlog = 4096
+user = swift
+swift_dir = /etc/swift
+devices = /srv/node
+mount_check = true
+# disable_fallocate = false
+# expiring_objects_container_divisor = 86400
+# expiring_objects_account_name = expiring_objects
+#
+# Use an integer to override the number of pre-forked processes that will
+# accept connections.  NOTE: if servers_per_port is set, this setting is
+# ignored.
+# workers = auto
+#
+# Make object-server run this many worker processes per unique port of
+# "local" ring devices across all storage policies.  This can help provide
+# the isolation of threads_per_disk without the severe overhead.  The default
+# value of 0 disables this feature.
+# servers_per_port = 0
+#
+# Maximum concurrent requests per worker
+# max_clients = 1024
+#
+# You can specify default log routing here if you want:
+# log_name = swift
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+# The following caps the length of log lines to the value given; no limit if
+# set to 0, the default.
+# log_max_line_length = 0
+#
+# comma separated list of functions to call to setup custom log handlers.
+# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
+# adapted_logger
+# log_custom_handlers =
+#
+# If set, log_udp_host will override log_address
+# log_udp_host =
+# log_udp_port = 514
+#
+# You can enable StatsD logging here:
+# log_statsd_host =
+# log_statsd_port = 8125
+# log_statsd_default_sample_rate = 1.0
+# log_statsd_sample_rate_factor = 1.0
+# log_statsd_metric_prefix =
+#
+# eventlet_debug = false
+#
+# You can set fallocate_reserve to the number of bytes you'd like fallocate to
+# reserve, whether there is space for the given file size or not.
+# fallocate_reserve = 0
+#
+# Time to wait while attempting to connect to another backend node.
+# conn_timeout = 0.5
+# Time to wait while sending each chunk of data to another backend node.
+# node_timeout = 3
+# Time to wait while sending a container update on object update.
+# container_update_timeout = 1.0
+# Time to wait while receiving each chunk of data from a client or another
+# backend node.
+# client_timeout = 60
+#
+# network_chunk_size = 65536
+# disk_chunk_size = 65536
+
+[pipeline:main]
+pipeline = healthcheck recon object-server
+
+[app:object-server]
+use = egg:swift#object
+# You can override the default log routing for this app here:
+# set log_name = object-server
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_requests = true
+# set log_address = /dev/log
+#
+# max_upload_time = 86400
+#
+# slow is the total amount of seconds an object PUT/DELETE request takes at
+# least. If it is faster, the object server will sleep this amount of time minus
+# the already passed transaction time.  This is only useful for simulating slow
+# devices on storage nodes during testing and development.
+# slow = 0
+#
+# Objects smaller than this are not evicted from the buffercache once read
+# keep_cache_size = 5242880
+#
+# If true, objects for authenticated GET requests may be kept in buffer cache
+# if small enough
+# keep_cache_private = false
+#
+# on PUTs, sync data every n MB
+# mb_per_sync = 512
+#
+# Comma separated list of headers that can be set in metadata on an object.
+# This list is in addition to X-Object-Meta-* headers and cannot include
+# Content-Type, etag, Content-Length, or deleted
+# allowed_headers = Content-Disposition, Content-Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object
+#
+# auto_create_account_prefix = .
+#
+# A value of 0 means "don't use thread pools". A reasonable starting point is
+# 4.
+# threads_per_disk = 0
+#
+# Configure parameter for creating specific server
+# To handle all verbs, including replication verbs, do not specify
+# "replication_server" (this is the default). To only handle replication,
+# set to a True value (e.g. "True" or "1"). To handle only non-replication
+# verbs, set to "False". Unless you have a separate replication network, you
+# should not specify any value for "replication_server".
+# replication_server = false
+#
+# Set to restrict the number of concurrent incoming SSYNC requests
+# Set to 0 for unlimited
+# Note that SSYNC requests are only used by the object reconstructor or the
+# object replicator when configured to use ssync.
+# replication_concurrency = 4
+#
+# Restricts incoming SSYNC requests to one per device,
+# replication_currency above allowing. This can help control I/O to each
+# device, but you may wish to set this to False to allow multiple SSYNC
+# requests (up to the above replication_concurrency setting) per device.
+# replication_one_per_device = True
+#
+# Number of seconds to wait for an existing replication device lock before
+# giving up.
+# replication_lock_timeout = 15
+#
+# These next two settings control when the SSYNC subrequest handler will
+# abort an incoming SSYNC attempt. An abort will occur if there are at
+# least threshold number of failures and the value of failures / successes
+# exceeds the ratio. The defaults of 100 and 1.0 means that at least 100
+# failures have to occur and there have to be more failures than successes for
+# an abort to occur.
+# replication_failure_threshold = 100
+# replication_failure_ratio = 1.0
+#
+# Use splice() for zero-copy object GETs. This requires Linux kernel
+# version 3.0 or greater. If you set "splice = yes" but the kernel
+# does not support it, error messages will appear in the object server
+# logs at startup, but your object servers should continue to function.
+#
+# splice = no
+
+[filter:healthcheck]
+use = egg:swift#healthcheck
+# An optional filesystem path, which if present, will cause the healthcheck
+# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE"
+# disable_path =
+
+[filter:recon]
+use = egg:swift#recon
+recon_cache_path = /var/cache/swift
+recon_lock_path = /var/lock
+
+[object-replicator]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = object-replicator
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# daemonize = on
+#
+# Time in seconds to wait between replication passes
+# interval = 30
+# run_pause is deprecated, use interval instead
+# run_pause = 30
+#
+# concurrency = 1
+# stats_interval = 300
+#
+# default is rsync, alternative is ssync
+# sync_method = rsync
+#
+# max duration of a partition rsync
+# rsync_timeout = 900
+#
+# bandwidth limit for rsync in kB/s. 0 means unlimited
+# rsync_bwlimit = 0
+#
+# passed to rsync for io op timeout
+# rsync_io_timeout = 30
+#
+# Allow rsync to compress data which is transmitted to destination node
+# during sync. However, this is applicable only when destination node is in
+# a different region than the local one.
+# NOTE: Objects that are already compressed (for example: .tar.gz, .mp3) might
+# slow down the syncing process.
+# rsync_compress = no
+#
+# Format of the rysnc module where the replicator will send data. See
+# etc/rsyncd.conf-sample for some usage examples.
+# rsync_module = {replication_ip}::object
+#
+# node_timeout = <whatever's in the DEFAULT section or 10>
+# max duration of an http request; this is for REPLICATE finalization calls and
+# so should be longer than node_timeout
+# http_timeout = 60
+#
+# attempts to kill all workers if nothing replicates for lockup_timeout seconds
+# lockup_timeout = 1800
+#
+# The replicator also performs reclamation
+# reclaim_age = 604800
+#
+# ring_check_interval = 15
+# recon_cache_path = /var/cache/swift
+#
+# limits how long rsync error log lines are
+# 0 means to log the entire line
+# rsync_error_log_line_length = 0
+#
+# handoffs_first and handoff_delete are options for a special case
+# such as disk full in the cluster. These two options SHOULD NOT BE
+# CHANGED, except for such an extreme situations. (e.g. disks filled up
+# or are about to fill up. Anyway, DO NOT let your drives fill up)
+# handoffs_first is the flag to replicate handoffs prior to canonical
+# partitions. It allows to force syncing and deleting handoffs quickly.
+# If set to a True value(e.g. "True" or "1"), partitions
+# that are not supposed to be on the node will be replicated first.
+# handoffs_first = False
+#
+# handoff_delete is the number of replicas which are ensured in swift.
+# If the number less than the number of replicas is set, object-replicator
+# could delete local handoffs even if all replicas are not ensured in the
+# cluster. Object-replicator would remove local handoff partition directories
+# after syncing partition when the number of successful responses is greater
+# than or equal to this number. By default(auto), handoff partitions will be
+# removed  when it has successfully replicated to all the canonical nodes.
+# handoff_delete = auto
+
+[object-reconstructor]
+# You can override the default log routing for this app here (don't use set!):
+# Unless otherwise noted, each setting below has the same meaning as described
+# in the [object-replicator] section, however these settings apply to the EC
+# reconstructor
+#
+# log_name = object-reconstructor
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# daemonize = on
+#
+# Time in seconds to wait between reconstruction passes
+# interval = 30
+# run_pause is deprecated, use interval instead
+# run_pause = 30
+#
+# concurrency = 1
+# stats_interval = 300
+# node_timeout = 10
+# http_timeout = 60
+# lockup_timeout = 1800
+# reclaim_age = 604800
+# ring_check_interval = 15
+# recon_cache_path = /var/cache/swift
+# handoffs_first = False
+
+[object-updater]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = object-updater
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# interval = 300
+# concurrency = 1
+# node_timeout = <whatever's in the DEFAULT section or 10>
+# slowdown will sleep that amount between objects
+# slowdown = 0.01
+#
+# recon_cache_path = /var/cache/swift
+
+[object-auditor]
+# You can override the default log routing for this app here (don't use set!):
+# log_name = object-auditor
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_address = /dev/log
+#
+# Time in seconds to wait between auditor passes
+# interval = 30
+#
+# You can set the disk chunk size that the auditor uses making it larger if
+# you like for more efficient local auditing of larger objects
+# disk_chunk_size = 65536
+# files_per_second = 20
+# concurrency = 1
+# bytes_per_second = 10000000
+# log_time = 3600
+# zero_byte_files_per_second = 50
+# recon_cache_path = /var/cache/swift
+
+# Takes a comma separated list of ints. If set, the object auditor will
+# increment a counter for every object whose size is <= to the given break
+# points and report the result after a full scan.
+# object_size_stats =
+
+# The auditor will cleanup old rsync tempfiles after they are "old
+# enough" to delete.  You can configure the time elapsed in seconds
+# before rsync tempfiles will be unlinked, or the default value of
+# "auto" try to use object-replicator's rsync_timeout + 900 and fallback
+# to 86400 (1 day).
+# rsync_tempfile_timeout = auto
+
+# Note: Put it at the beginning of the pipleline to profile all middleware. But
+# it is safer to put this after healthcheck.
+[filter:xprofile]
+use = egg:swift#xprofile
+# This option enable you to switch profilers which should inherit from python
+# standard profiler. Currently the supported value can be 'cProfile',
+# 'eventlet.green.profile' etc.
+# profile_module = eventlet.green.profile
+#
+# This prefix will be used to combine process ID and timestamp to name the
+# profile data file.  Make sure the executing user has permission to write
+# into this path (missing path segments will be created, if necessary).
+# If you enable profiling in more than one type of daemon, you must override
+# it with an unique value like: /var/log/swift/profile/object.profile
+# log_filename_prefix = /tmp/log/swift/profile/default.profile
+#
+# the profile data will be dumped to local disk based on above naming rule
+# in this interval.
+# dump_interval = 5.0
+#
+# Be careful, this option will enable profiler to dump data into the file with
+# time stamp which means there will be lots of files piled up in the directory.
+# dump_timestamp = false
+#
+# This is the path of the URL to access the mini web UI.
+# path = /__profile__
+#
+# Clear the data when the wsgi server shutdown.
+# flush_at_shutdown = false
+#
+# unwind the iterator of applications
+# unwind = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf b/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf
new file mode 100644
index 00000000..b76796cf
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/proxy-server.conf
@@ -0,0 +1,764 @@
+{% set memcached_servers = [] %}
+{% for host in haproxy_hosts.values() %}
+{% set _ = memcached_servers.append('%s:11211'% host) %}
+{% endfor %}
+{% set memcached_servers = memcached_servers|join(',') %}
+[DEFAULT]
+bind_ip = {{ internal_ip }}
+bind_port = 8080
+# bind_timeout = 30
+# backlog = 4096
+swift_dir = /etc/swift
+user = swift
+
+# Enables exposing configuration settings via HTTP GET /info.
+# expose_info = true
+
+# Key to use for admin calls that are HMAC signed.  Default is empty,
+# which will disable admin calls to /info.
+# admin_key = secret_admin_key
+#
+# Allows the ability to withhold sections from showing up in the public calls
+# to /info.  You can withhold subsections by separating the dict level with a
+# ".".  The following would cause the sections 'container_quotas' and 'tempurl'
+# to not be listed, and the key max_failed_deletes would be removed from
+# bulk_delete.  Default value is 'swift.valid_api_versions' which allows all
+# registered features to be listed via HTTP GET /info except
+# swift.valid_api_versions information
+# disallowed_sections = swift.valid_api_versions, container_quotas, tempurl
+
+# Use an integer to override the number of pre-forked processes that will
+# accept connections.  Should default to the number of effective cpu
+# cores in the system.  It's worth noting that individual workers will
+# use many eventlet co-routines to service multiple concurrent requests.
+# workers = auto
+#
+# Maximum concurrent requests per worker
+# max_clients = 1024
+#
+# Set the following two lines to enable SSL. This is for testing only.
+# cert_file = /etc/swift/proxy.crt
+# key_file = /etc/swift/proxy.key
+#
+# expiring_objects_container_divisor = 86400
+# expiring_objects_account_name = expiring_objects
+#
+# You can specify default log routing here if you want:
+# log_name = swift
+# log_facility = LOG_LOCAL0
+# log_level = INFO
+# log_headers = false
+# log_address = /dev/log
+# The following caps the length of log lines to the value given; no limit if
+# set to 0, the default.
+# log_max_line_length = 0
+#
+# This optional suffix (default is empty) that would be appended to the swift transaction
+# id allows one to easily figure out from which cluster that X-Trans-Id belongs to.
+# This is very useful when one is managing more than one swift cluster.
+# trans_id_suffix =
+#
+# comma separated list of functions to call to setup custom log handlers.
+# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
+# adapted_logger
+# log_custom_handlers =
+#
+# If set, log_udp_host will override log_address
+# log_udp_host =
+# log_udp_port = 514
+#
+# You can enable StatsD logging here:
+# log_statsd_host =
+# log_statsd_port = 8125
+# log_statsd_default_sample_rate = 1.0
+# log_statsd_sample_rate_factor = 1.0
+# log_statsd_metric_prefix =
+#
+# Use a comma separated list of full url (http://foo.bar:1234,https://foo.bar)
+# cors_allow_origin =
+# strict_cors_mode = True
+#
+# client_timeout = 60
+# eventlet_debug = false
+
+[pipeline:main]
+# This sample pipeline uses tempauth and is used for SAIO dev work and
+# testing. See below for a pipeline using keystone.
+#pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk tempurl ratelimit tempauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
+pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk ratelimit authtoken keystoneauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
+
+# The following pipeline shows keystone integration. Comment out the one
+# above and uncomment this one. Additional steps for integrating keystone are
+# covered further below in the filter sections for authtoken and keystoneauth.
+#pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk tempurl ratelimit authtoken keystoneauth container-quotas account-quotas slo dlo versioned_writes proxy-logging proxy-server
+
+[app:proxy-server]
+use = egg:swift#proxy
+account_autocreate = True
+# You can override the default log routing for this app here:
+# set log_name = proxy-server
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_address = /dev/log
+#
+# log_handoffs = true
+# recheck_account_existence = 60
+# recheck_container_existence = 60
+# object_chunk_size = 65536
+# client_chunk_size = 65536
+#
+# How long the proxy server will wait on responses from the a/c/o servers.
+# node_timeout = 10
+#
+# How long the proxy server will wait for an initial response and to read a
+# chunk of data from the object servers while serving GET / HEAD requests.
+# Timeouts from these requests can be recovered from so setting this to
+# something lower than node_timeout would provide quicker error recovery
+# while allowing for a longer timeout for non-recoverable requests (PUTs).
+# Defaults to node_timeout, should be overriden if node_timeout is set to a
+# high number to prevent client timeouts from firing before the proxy server
+# has a chance to retry.
+# recoverable_node_timeout = node_timeout
+#
+# conn_timeout = 0.5
+#
+# How long to wait for requests to finish after a quorum has been established.
+# post_quorum_timeout = 0.5
+#
+# How long without an error before a node's error count is reset. This will
+# also be how long before a node is reenabled after suppression is triggered.
+# error_suppression_interval = 60
+#
+# How many errors can accumulate before a node is temporarily ignored.
+# error_suppression_limit = 10
+#
+# If set to 'true' any authorized user may create and delete accounts; if
+# 'false' no one, even authorized, can.
+# allow_account_management = false
+#
+# Set object_post_as_copy = false to turn on fast posts where only the metadata
+# changes are stored anew and the original data file is kept in place. This
+# makes for quicker posts.
+# object_post_as_copy = true
+#
+# If set to 'true' authorized accounts that do not yet exist within the Swift
+# cluster will be automatically created.
+# account_autocreate = false
+#
+# If set to a positive value, trying to create a container when the account
+# already has at least this maximum containers will result in a 403 Forbidden.
+# Note: This is a soft limit, meaning a user might exceed the cap for
+# recheck_account_existence before the 403s kick in.
+# max_containers_per_account = 0
+#
+# This is a comma separated list of account hashes that ignore the
+# max_containers_per_account cap.
+# max_containers_whitelist =
+#
+# Comma separated list of Host headers to which the proxy will deny requests.
+# deny_host_headers =
+#
+# Prefix used when automatically creating accounts.
+# auto_create_account_prefix = .
+#
+# Depth of the proxy put queue.
+# put_queue_depth = 10
+#
+# Storage nodes can be chosen at random (shuffle), by using timing
+# measurements (timing), or by using an explicit match (affinity).
+# Using timing measurements may allow for lower overall latency, while
+# using affinity allows for finer control. In both the timing and
+# affinity cases, equally-sorting nodes are still randomly chosen to
+# spread load.
+# The valid values for sorting_method are "affinity", "shuffle", or "timing".
+# sorting_method = shuffle
+#
+# If the "timing" sorting_method is used, the timings will only be valid for
+# the number of seconds configured by timing_expiry.
+# timing_expiry = 300
+#
+# By default on a GET/HEAD swift will connect to a storage node one at a time
+# in a single thread. There is smarts in the order they are hit however. If you
+# turn on concurrent_gets below, then replica count threads will be used.
+# With addition of the concurrency_timeout option this will allow swift to send
+# out GET/HEAD requests to the storage nodes concurrently and answer with the
+# first to respond. With an EC policy the parameter only affects HEAD requests.
+# concurrent_gets = off
+#
+# This parameter controls how long to wait before firing off the next
+# concurrent_get thread. A value of 0 would be fully concurrent, any other
+# number will stagger the firing of the threads. This number should be
+# between 0 and node_timeout. The default is what ever you set for the
+# conn_timeout parameter.
+# concurrency_timeout = 0.5
+#
+# Set to the number of nodes to contact for a normal request. You can use
+# '* replicas' at the end to have it use the number given times the number of
+# replicas for the ring being used for the request.
+# request_node_count = 2 * replicas
+#
+# Which backend servers to prefer on reads. Format is r<N> for region
+# N or r<N>z<M> for region N, zone M. The value after the equals is
+# the priority; lower numbers are higher priority.
+#
+# Example: first read from region 1 zone 1, then region 1 zone 2, then
+# anything in region 2, then everything else:
+# read_affinity = r1z1=100, r1z2=200, r2=300
+# Default is empty, meaning no preference.
+# read_affinity =
+#
+# Which backend servers to prefer on writes. Format is r<N> for region
+# N or r<N>z<M> for region N, zone M. If this is set, then when
+# handling an object PUT request, some number (see setting
+# write_affinity_node_count) of local backend servers will be tried
+# before any nonlocal ones.
+#
+# Example: try to write to regions 1 and 2 before writing to any other
+# nodes:
+# write_affinity = r1, r2
+# Default is empty, meaning no preference.
+# write_affinity =
+#
+# The number of local (as governed by the write_affinity setting)
+# nodes to attempt to contact first, before any non-local ones. You
+# can use '* replicas' at the end to have it use the number given
+# times the number of replicas for the ring being used for the
+# request.
+# write_affinity_node_count = 2 * replicas
+#
+# These are the headers whose values will only be shown to swift_owners. The
+# exact definition of a swift_owner is up to the auth system in use, but
+# usually indicates administrative responsibilities.
+# swift_owner_headers = x-container-read, x-container-write, x-container-sync-key, x-container-sync-to, x-account-meta-temp-url-key, x-account-meta-temp-url-key-2, x-container-meta-temp-url-key, x-container-meta-temp-url-key-2, x-account-access-control
+
+[filter:tempauth]
+use = egg:swift#tempauth
+# You can override the default log routing for this filter here:
+# set log_name = tempauth
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+#
+# The reseller prefix will verify a token begins with this prefix before even
+# attempting to validate it. Also, with authorization, only Swift storage
+# accounts with this prefix will be authorized by this middleware. Useful if
+# multiple auth systems are in use for one Swift cluster.
+# The reseller_prefix may contain a comma separated list of items. The first
+# item is used for the token as mentioned above. If second and subsequent
+# items exist, the middleware will handle authorization for an account with
+# that prefix. For example, for prefixes "AUTH, SERVICE", a path of
+# /v1/SERVICE_account is handled the same as /v1/AUTH_account. If an empty
+# (blank) reseller prefix is required, it must be first in the list. Two
+# single quote characters indicates an empty (blank) reseller prefix.
+# reseller_prefix = AUTH
+
+#
+# The require_group parameter names a group that must be presented by
+# either X-Auth-Token or X-Service-Token. Usually this parameter is
+# used only with multiple reseller prefixes (e.g., SERVICE_require_group=blah).
+# By default, no group is needed. Do not use .admin.
+# require_group =
+
+# The auth prefix will cause requests beginning with this prefix to be routed
+# to the auth subsystem, for granting tokens, etc.
+# auth_prefix = /auth/
+# token_life = 86400
+#
+# This allows middleware higher in the WSGI pipeline to override auth
+# processing, useful for middleware such as tempurl and formpost. If you know
+# you're not going to use such middleware and you want a bit of extra security,
+# you can set this to false.
+# allow_overrides = true
+#
+# This specifies what scheme to return with storage urls:
+# http, https, or default (chooses based on what the server is running as)
+# This can be useful with an SSL load balancer in front of a non-SSL server.
+# storage_url_scheme = default
+#
+# Lastly, you need to list all the accounts/users you want here. The format is:
+#   user_<account>_<user> = <key> [group] [group] [...] [storage_url]
+# or if you want underscores in <account> or <user>, you can base64 encode them
+# (with no equal signs) and use this format:
+#   user64_<account_b64>_<user_b64> = <key> [group] [group] [...] [storage_url]
+# There are special groups of:
+#   .reseller_admin = can do anything to any account for this auth
+#   .admin = can do anything within the account
+# If neither of these groups are specified, the user can only access containers
+# that have been explicitly allowed for them by a .admin or .reseller_admin.
+# The trailing optional storage_url allows you to specify an alternate url to
+# hand back to the user upon authentication. If not specified, this defaults to
+# $HOST/v1/<reseller_prefix>_<account> where $HOST will do its best to resolve
+# to what the requester would need to use to reach this host.
+# Here are example entries, required for running the tests:
+user_admin_admin = admin .admin .reseller_admin
+user_test_tester = testing .admin
+user_test2_tester2 = testing2 .admin
+user_test_tester3 = testing3
+user_test5_tester5 = testing5 service
+
+# To enable Keystone authentication you need to have the auth token
+# middleware first to be configured. Here is an example below, please
+# refer to the keystone's documentation for details about the
+# different settings.
+#
+# You'll also need to have the keystoneauth middleware enabled and have it in
+# your main pipeline, as show in the sample pipeline at the top of this file.
+#
+# Following parameters are known to work with keystonemiddleware v2.3.0
+# (above v2.0.0), but checking the latest information in the wiki page[1]
+# is recommended.
+# 1. http://docs.openstack.org/developer/keystonemiddleware/middlewarearchitecture.html#configuration
+#
+[filter:authtoken]
+paste.filter_factory = keystonemiddleware.auth_token:filter_factory
+auth_uri = http://{{ internal_vip.ip }}:5000
+auth_url = http://{{ internal_vip.ip }}:35357
+identity_uri = http://{{ internal_vip.ip }}:35357
+memcached_servers = {{ memcached_servers }}
+#auth_plugin = password
+auth_type = password
+project_domain_id = default
+user_domain_id = default
+project_name = service
+username = swift
+password = {{ CINDER_PASS }}
+delay_auth_decision = True
+#
+# delay_auth_decision defaults to False, but leaving it as false will
+# prevent other auth systems, staticweb, tempurl, formpost, and ACLs from
+# working. This value must be explicitly set to True.
+# delay_auth_decision = False
+#
+# cache = swift.cache
+# include_service_catalog = False
+#
+[filter:keystoneauth]
+use = egg:swift#keystoneauth
+operator_roles = admin,user
+# The reseller_prefix option lists account namespaces that this middleware is
+# responsible for. The prefix is placed before the Keystone project id.
+# For example, for project 12345678, and prefix AUTH, the account is
+# named AUTH_12345678 (i.e., path is /v1/AUTH_12345678/...).
+# Several prefixes are allowed by specifying a comma-separated list
+# as in: "reseller_prefix = AUTH, SERVICE". The empty string indicates a
+# single blank/empty prefix. If an empty prefix is required in a list of
+# prefixes, a value of '' (two single quote characters) indicates a
+# blank/empty prefix. Except for the blank/empty prefix, an underscore ('_')
+# character is appended to the value unless already present.
+# reseller_prefix = AUTH
+#
+# The user must have at least one role named by operator_roles on a
+# project in order to create, delete and modify containers and objects
+# and to set and read privileged headers such as ACLs.
+# If there are several reseller prefix items, you can prefix the
+# parameter so it applies only to those accounts (for example
+# the parameter SERVICE_operator_roles applies to the /v1/SERVICE_<project>
+# path). If you omit the prefix, the option applies to all reseller
+# prefix items. For the blank/empty prefix, prefix with '' (do not put
+# underscore after the two single quote characters).
+# operator_roles = admin, swiftoperator
+#
+# The reseller admin role has the ability to create and delete accounts
+# reseller_admin_role = ResellerAdmin
+#
+# This allows middleware higher in the WSGI pipeline to override auth
+# processing, useful for middleware such as tempurl and formpost. If you know
+# you're not going to use such middleware and you want a bit of extra security,
+# you can set this to false.
+# allow_overrides = true
+#
+# If the service_roles parameter is present, an X-Service-Token must be
+# present in the request that when validated, grants at least one role listed
+# in the parameter. The X-Service-Token may be scoped to any project.
+# If there are several reseller prefix items, you can prefix the
+# parameter so it applies only to those accounts (for example
+# the parameter SERVICE_service_roles applies to the /v1/SERVICE_<project>
+# path). If you omit the prefix, the option applies to all reseller
+# prefix items. For the blank/empty prefix, prefix with '' (do not put
+# underscore after the two single quote characters).
+# By default, no service_roles are required.
+# service_roles =
+#
+# For backwards compatibility, keystoneauth will match names in cross-tenant
+# access control lists (ACLs) when both the requesting user and the tenant
+# are in the default domain i.e the domain to which existing tenants are
+# migrated. The default_domain_id value configured here should be the same as
+# the value used during migration of tenants to keystone domains.
+# default_domain_id = default
+#
+# For a new installation, or an installation in which keystone projects may
+# move between domains, you should disable backwards compatible name matching
+# in ACLs by setting allow_names_in_acls to false:
+# allow_names_in_acls = true
+
+[filter:healthcheck]
+use = egg:swift#healthcheck
+# An optional filesystem path, which if present, will cause the healthcheck
+# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE".
+# This facility may be used to temporarily remove a Swift node from a load
+# balancer pool during maintenance or upgrade (remove the file to allow the
+# node back into the load balancer pool).
+# disable_path =
+
+[filter:cache]
+use = egg:swift#memcache
+memcache_servers = {{ memcached_servers }}
+# You can override the default log routing for this filter here:
+# set log_name = cache
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+#
+# If not set here, the value for memcache_servers will be read from
+# memcache.conf (see memcache.conf-sample) or lacking that file, it will
+# default to the value below. You can specify multiple servers separated with
+# commas, as in: 10.1.2.3:11211,10.1.2.4:11211 (IPv6 addresses must
+# follow rfc3986 section-3.2.2, i.e. [::1]:11211)
+# memcache_servers = 127.0.0.1:11211
+#
+# Sets how memcache values are serialized and deserialized:
+# 0 = older, insecure pickle serialization
+# 1 = json serialization but pickles can still be read (still insecure)
+# 2 = json serialization only (secure and the default)
+# If not set here, the value for memcache_serialization_support will be read
+# from /etc/swift/memcache.conf (see memcache.conf-sample).
+# To avoid an instant full cache flush, existing installations should
+# upgrade with 0, then set to 1 and reload, then after some time (24 hours)
+# set to 2 and reload.
+# In the future, the ability to use pickle serialization will be removed.
+# memcache_serialization_support = 2
+#
+# Sets the maximum number of connections to each memcached server per worker
+# memcache_max_connections = 2
+#
+# More options documented in memcache.conf-sample
+
+[filter:ratelimit]
+use = egg:swift#ratelimit
+# You can override the default log routing for this filter here:
+# set log_name = ratelimit
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+#
+# clock_accuracy should represent how accurate the proxy servers' system clocks
+# are with each other. 1000 means that all the proxies' clock are accurate to
+# each other within 1 millisecond.  No ratelimit should be higher than the
+# clock accuracy.
+# clock_accuracy = 1000
+#
+# max_sleep_time_seconds = 60
+#
+# log_sleep_time_seconds of 0 means disabled
+# log_sleep_time_seconds = 0
+#
+# allows for slow rates (e.g. running up to 5 sec's behind) to catch up.
+# rate_buffer_seconds = 5
+#
+# account_ratelimit of 0 means disabled
+# account_ratelimit = 0
+
+# DEPRECATED- these will continue to work but will be replaced
+# by the X-Account-Sysmeta-Global-Write-Ratelimit flag.
+# Please see ratelimiting docs for details.
+# these are comma separated lists of account names
+# account_whitelist = a,b
+# account_blacklist = c,d
+
+# with container_limit_x = r
+# for containers of size x limit write requests per second to r.  The container
+# rate will be linearly interpolated from the values given. With the values
+# below, a container of size 5 will get a rate of 75.
+# container_ratelimit_0 = 100
+# container_ratelimit_10 = 50
+# container_ratelimit_50 = 20
+
+# Similarly to the above container-level write limits, the following will limit
+# container GET (listing) requests.
+# container_listing_ratelimit_0 = 100
+# container_listing_ratelimit_10 = 50
+# container_listing_ratelimit_50 = 20
+
+[filter:domain_remap]
+use = egg:swift#domain_remap
+# You can override the default log routing for this filter here:
+# set log_name = domain_remap
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+#
+# storage_domain = example.com
+# path_root = v1
+
+# Browsers can convert a host header to lowercase, so check that reseller
+# prefix on the account is the correct case. This is done by comparing the
+# items in the reseller_prefixes config option to the found prefix. If they
+# match except for case, the item from reseller_prefixes will be used
+# instead of the found reseller prefix. When none match, the default reseller
+# prefix is used. When no default reseller prefix is configured, any request
+# with an account prefix not in that list will be ignored by this middleware.
+# reseller_prefixes = AUTH
+# default_reseller_prefix =
+
+[filter:catch_errors]
+use = egg:swift#catch_errors
+# You can override the default log routing for this filter here:
+# set log_name = catch_errors
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+
+[filter:cname_lookup]
+# Note: this middleware requires python-dnspython
+use = egg:swift#cname_lookup
+# You can override the default log routing for this filter here:
+# set log_name = cname_lookup
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+#
+# Specify the storage_domain that match your cloud, multiple domains
+# can be specified separated by a comma
+# storage_domain = example.com
+#
+# lookup_depth = 1
+
+# Note: Put staticweb just after your auth filter(s) in the pipeline
+[filter:staticweb]
+use = egg:swift#staticweb
+# You can override the default log routing for this filter here:
+# set log_name = staticweb
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+
+# Note: Put tempurl before dlo, slo and your auth filter(s) in the pipeline
+[filter:tempurl]
+use = egg:swift#tempurl
+# The methods allowed with Temp URLs.
+# methods = GET HEAD PUT POST DELETE
+#
+# The headers to remove from incoming requests. Simply a whitespace delimited
+# list of header names and names can optionally end with '*' to indicate a
+# prefix match. incoming_allow_headers is a list of exceptions to these
+# removals.
+# incoming_remove_headers = x-timestamp
+#
+# The headers allowed as exceptions to incoming_remove_headers. Simply a
+# whitespace delimited list of header names and names can optionally end with
+# '*' to indicate a prefix match.
+# incoming_allow_headers =
+#
+# The headers to remove from outgoing responses. Simply a whitespace delimited
+# list of header names and names can optionally end with '*' to indicate a
+# prefix match. outgoing_allow_headers is a list of exceptions to these
+# removals.
+# outgoing_remove_headers = x-object-meta-*
+#
+# The headers allowed as exceptions to outgoing_remove_headers. Simply a
+# whitespace delimited list of header names and names can optionally end with
+# '*' to indicate a prefix match.
+# outgoing_allow_headers = x-object-meta-public-*
+
+# Note: Put formpost just before your auth filter(s) in the pipeline
+[filter:formpost]
+use = egg:swift#formpost
+
+# Note: Just needs to be placed before the proxy-server in the pipeline.
+[filter:name_check]
+use = egg:swift#name_check
+# forbidden_chars = '"`<>
+# maximum_length = 255
+# forbidden_regexp = /\./|/\.\./|/\.$|/\.\.$
+
+[filter:list-endpoints]
+use = egg:swift#list_endpoints
+# list_endpoints_path = /endpoints/
+
+[filter:proxy-logging]
+use = egg:swift#proxy_logging
+# If not set, logging directives from [DEFAULT] without "access_" will be used
+# access_log_name = swift
+# access_log_facility = LOG_LOCAL0
+# access_log_level = INFO
+# access_log_address = /dev/log
+#
+# If set, access_log_udp_host will override access_log_address
+# access_log_udp_host =
+# access_log_udp_port = 514
+#
+# You can use log_statsd_* from [DEFAULT] or override them here:
+# access_log_statsd_host =
+# access_log_statsd_port = 8125
+# access_log_statsd_default_sample_rate = 1.0
+# access_log_statsd_sample_rate_factor = 1.0
+# access_log_statsd_metric_prefix =
+# access_log_headers = false
+#
+# If access_log_headers is True and access_log_headers_only is set only
+# these headers are logged. Multiple headers can be defined as comma separated
+# list like this: access_log_headers_only = Host, X-Object-Meta-Mtime
+# access_log_headers_only =
+#
+# By default, the X-Auth-Token is logged. To obscure the value,
+# set reveal_sensitive_prefix to the number of characters to log.
+# For example, if set to 12, only the first 12 characters of the
+# token appear in the log. An unauthorized access of the log file
+# won't allow unauthorized usage of the token. However, the first
+# 12 or so characters is unique enough that you can trace/debug
+# token usage. Set to 0 to suppress the token completely (replaced
+# by '...' in the log).
+# Note: reveal_sensitive_prefix will not affect the value
+# logged with access_log_headers=True.
+# reveal_sensitive_prefix = 16
+#
+# What HTTP methods are allowed for StatsD logging (comma-sep); request methods
+# not in this list will have "BAD_METHOD" for the <verb> portion of the metric.
+# log_statsd_valid_http_methods = GET,HEAD,POST,PUT,DELETE,COPY,OPTIONS
+#
+# Note: The double proxy-logging in the pipeline is not a mistake. The
+# left-most proxy-logging is there to log requests that were handled in
+# middleware and never made it through to the right-most middleware (and
+# proxy server). Double logging is prevented for normal requests. See
+# proxy-logging docs.
+
+# Note: Put before both ratelimit and auth in the pipeline.
+[filter:bulk]
+use = egg:swift#bulk
+# max_containers_per_extraction = 10000
+# max_failed_extractions = 1000
+# max_deletes_per_request = 10000
+# max_failed_deletes = 1000
+
+# In order to keep a connection active during a potentially long bulk request,
+# Swift may return whitespace prepended to the actual response body. This
+# whitespace will be yielded no more than every yield_frequency seconds.
+# yield_frequency = 10
+
+# Note: The following parameter is used during a bulk delete of objects and
+# their container. This would frequently fail because it is very likely
+# that all replicated objects have not been deleted by the time the middleware got a
+# successful response. It can be configured the number of retries. And the
+# number of seconds to wait between each retry will be 1.5**retry
+
+# delete_container_retry_count = 0
+
+# Note: Put after auth and staticweb in the pipeline.
+[filter:slo]
+use = egg:swift#slo
+# max_manifest_segments = 1000
+# max_manifest_size = 2097152
+#
+# Rate limiting applies only to segments smaller than this size (bytes).
+# rate_limit_under_size = 1048576
+#
+# Start rate-limiting SLO segment serving after the Nth small segment of a
+# segmented object.
+# rate_limit_after_segment = 10
+#
+# Once segment rate-limiting kicks in for an object, limit segments served
+# to N per second. 0 means no rate-limiting.
+# rate_limit_segments_per_sec = 1
+#
+# Time limit on GET requests (seconds)
+# max_get_time = 86400
+
+# Note: Put after auth and staticweb in the pipeline.
+# If you don't put it in the pipeline, it will be inserted for you.
+[filter:dlo]
+use = egg:swift#dlo
+# Start rate-limiting DLO segment serving after the Nth segment of a
+# segmented object.
+# rate_limit_after_segment = 10
+#
+# Once segment rate-limiting kicks in for an object, limit segments served
+# to N per second. 0 means no rate-limiting.
+# rate_limit_segments_per_sec = 1
+#
+# Time limit on GET requests (seconds)
+# max_get_time = 86400
+
+# Note: Put after auth in the pipeline.
+[filter:container-quotas]
+use = egg:swift#container_quotas
+
+# Note: Put after auth in the pipeline.
+[filter:account-quotas]
+use = egg:swift#account_quotas
+
+[filter:gatekeeper]
+use = egg:swift#gatekeeper
+# Set this to false if you want to allow clients to set arbitrary X-Timestamps
+# on uploaded objects. This may be used to preserve timestamps when migrating
+# from a previous storage system, but risks allowing users to upload
+# difficult-to-delete data.
+# shunt_inbound_x_timestamp = true
+#
+# You can override the default log routing for this filter here:
+# set log_name = gatekeeper
+# set log_facility = LOG_LOCAL0
+# set log_level = INFO
+# set log_headers = false
+# set log_address = /dev/log
+
+[filter:container_sync]
+use = egg:swift#container_sync
+# Set this to false if you want to disallow any full url values to be set for
+# any new X-Container-Sync-To headers. This will keep any new full urls from
+# coming in, but won't change any existing values already in the cluster.
+# Updating those will have to be done manually, as knowing what the true realm
+# endpoint should be cannot always be guessed.
+# allow_full_urls = true
+# Set this to specify this clusters //realm/cluster as "current" in /info
+# current = //REALM/CLUSTER
+
+# Note: Put it at the beginning of the pipeline to profile all middleware. But
+# it is safer to put this after catch_errors, gatekeeper and healthcheck.
+[filter:xprofile]
+use = egg:swift#xprofile
+# This option enable you to switch profilers which should inherit from python
+# standard profiler. Currently the supported value can be 'cProfile',
+# 'eventlet.green.profile' etc.
+# profile_module = eventlet.green.profile
+#
+# This prefix will be used to combine process ID and timestamp to name the
+# profile data file.  Make sure the executing user has permission to write
+# into this path (missing path segments will be created, if necessary).
+# If you enable profiling in more than one type of daemon, you must override
+# it with an unique value like: /var/log/swift/profile/proxy.profile
+# log_filename_prefix = /tmp/log/swift/profile/default.profile
+#
+# the profile data will be dumped to local disk based on above naming rule
+# in this interval.
+# dump_interval = 5.0
+#
+# Be careful, this option will enable profiler to dump data into the file with
+# time stamp which means there will be lots of files piled up in the directory.
+# dump_timestamp = false
+#
+# This is the path of the URL to access the mini web UI.
+# path = /__profile__
+#
+# Clear the data when the wsgi server shutdown.
+# flush_at_shutdown = false
+#
+# unwind the iterator of applications
+# unwind = false
+
+# Note: Put after slo, dlo in the pipeline.
+# If you don't put it in the pipeline, it will be inserted automatically.
+[filter:versioned_writes]
+use = egg:swift#versioned_writes
+# Enables using versioned writes middleware and exposing configuration
+# settings via HTTP GET /info.
+# WARNING: Setting this option bypasses the "allow_versions" option
+# in the container configuration file, which will be eventually
+# deprecated. See documentation for more details.
+# allow_versioned_writes = false
diff --git a/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf b/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf
new file mode 100644
index 00000000..703c55eb
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/rsyncd.conf
@@ -0,0 +1,23 @@
+uid = swift
+gid = swift
+log file = /var/log/rsyncd.log
+pid file = /var/run/rsyncd.pid
+address = {{ internal_ip }}
+
+[account]
+max connections = 2
+path = /srv/node/
+read only = False
+lock file = /var/lock/account.lock
+
+[container]
+max connections = 2
+path = /srv/node/
+read only = False
+lock file = /var/lock/container.lock
+
+[object]
+max connections = 2
+path = /srv/node/
+read only = False
+lock file = /var/lock/object.lock
diff --git a/deploy/adapters/ansible/roles/swift/templates/swift.conf b/deploy/adapters/ansible/roles/swift/templates/swift.conf
new file mode 100644
index 00000000..9a31501b
--- /dev/null
+++ b/deploy/adapters/ansible/roles/swift/templates/swift.conf
@@ -0,0 +1,183 @@
+[swift-hash]
+
+# swift_hash_path_suffix and swift_hash_path_prefix are used as part of the
+# the hashing algorithm when determining data placement in the cluster.
+# These values should remain secret and MUST NOT change
+# once a cluster has been deployed.
+# Use only printable chars (python -c "import string; print(string.printable)")
+
+swift_hash_path_suffix = 7c6a7cd34d07aed5
+swift_hash_path_prefix = 0c4629166f4de441
+
+# storage policies are defined here and determine various characteristics
+# about how objects are stored and treated.  Policies are specified by name on
+# a per container basis.  Names are case-insensitive.  The policy index is
+# specified in the section header and is used internally.  The policy with
+# index 0 is always used for legacy containers and can be given a name for use
+# in metadata however the ring file name will always be 'object.ring.gz' for
+# backwards compatibility.  If no policies are defined a policy with index 0
+# will be automatically created for backwards compatibility and given the name
+# Policy-0.  A default policy is used when creating new containers when no
+# policy is specified in the request.  If no other policies are defined the
+# policy with index 0 will be declared the default.  If multiple policies are
+# defined you must define a policy with index 0 and you must specify a
+# default.  It is recommended you always define a section for
+# storage-policy:0. Aliases are not required when defining a storage policy.
+#
+# A 'policy_type' argument is also supported but is not mandatory.  Default
+# policy type 'replication' is used when 'policy_type' is unspecified.
+[storage-policy:0]
+name = Policy-0
+default = yes
+#policy_type = replication
+aliases = yellow, orange
+
+# the following section would declare a policy called 'silver', the number of
+# replicas will be determined by how the ring is built.  In this example the
+# 'silver' policy could have a lower or higher # of replicas than the
+# 'Policy-0' policy above.  The ring filename will be 'object-1.ring.gz'.  You
+# may only specify one storage policy section as the default.  If you changed
+# this section to specify 'silver' as the default, when a client created a new
+# container w/o a policy specified, it will get the 'silver' policy because
+# this config has specified it as the default.  However if a legacy container
+# (one created with a pre-policy version of swift) is accessed, it is known
+# implicitly to be assigned to the policy with index 0 as opposed to the
+# current default. Note that even without specifying any aliases, a policy
+# always has at least the default name stored in aliases because this field is
+# used to contain all human readable names for a storage policy.
+#
+#[storage-policy:1]
+#name = silver
+#policy_type = replication
+
+# The following declares a storage policy of type 'erasure_coding' which uses
+# Erasure Coding for data reliability. Please refer to Swift documentation for
+# details on how the 'erasure_coding' storage policy is implemented.
+#
+# Swift uses PyECLib, a Python Erasure coding API library, for encode/decode
+# operations.  Please refer to Swift documentation for details on how to
+# install PyECLib.
+#
+# When defining an EC policy, 'policy_type' needs to be 'erasure_coding' and
+# EC configuration parameters 'ec_type', 'ec_num_data_fragments' and
+# 'ec_num_parity_fragments' must be specified.  'ec_type' is chosen from the
+# list of EC backends supported by PyECLib.  The ring configured for the
+# storage policy must have it's "replica" count configured to
+# 'ec_num_data_fragments' + 'ec_num_parity_fragments' - this requirement is
+# validated when services start.  'ec_object_segment_size' is the amount of
+# data that will be buffered up before feeding a segment into the
+# encoder/decoder.  More information about these configuration options and
+# supported `ec_type` schemes is available in the Swift documentation.  Please
+# refer to Swift documentation for details on how to configure EC policies.
+#
+# The example 'deepfreeze10-4' policy defined below is a _sample_
+# configuration with an alias of 'df10-4' as well as 10 'data' and 4 'parity'
+# fragments. 'ec_type' defines the Erasure Coding scheme.
+# 'liberasurecode_rs_vand' (Reed-Solomon Vandermonde) is used as an example
+# below.
+#
+#[storage-policy:2]
+#name = deepfreeze10-4
+#aliases = df10-4
+#policy_type = erasure_coding
+#ec_type = liberasurecode_rs_vand
+#ec_num_data_fragments = 10
+#ec_num_parity_fragments = 4
+#ec_object_segment_size = 1048576
+
+
+# The swift-constraints section sets the basic constraints on data
+# saved in the swift cluster. These constraints are automatically
+# published by the proxy server in responses to /info requests.
+
+[swift-constraints]
+
+# max_file_size is the largest "normal" object that can be saved in
+# the cluster. This is also the limit on the size of each segment of
+# a "large" object when using the large object manifest support.
+# This value is set in bytes. Setting it to lower than 1MiB will cause
+# some tests to fail. It is STRONGLY recommended to leave this value at
+# the default (5 * 2**30 + 2).
+
+#max_file_size = 5368709122
+
+
+# max_meta_name_length is the max number of bytes in the utf8 encoding
+# of the name portion of a metadata header.
+
+#max_meta_name_length = 128
+
+
+# max_meta_value_length is the max number of bytes in the utf8 encoding
+# of a metadata value
+
+#max_meta_value_length = 256
+
+
+# max_meta_count is the max number of metadata keys that can be stored
+# on a single account, container, or object
+
+#max_meta_count = 90
+
+
+# max_meta_overall_size is the max number of bytes in the utf8 encoding
+# of the metadata (keys + values)
+
+#max_meta_overall_size = 4096
+
+# max_header_size is the max number of bytes in the utf8 encoding of each
+# header. Using 8192 as default because eventlet use 8192 as max size of
+# header line. This value may need to be increased when using identity
+# v3 API tokens including more than 7 catalog entries.
+# See also include_service_catalog in proxy-server.conf-sample
+# (documented in overview_auth.rst)
+
+#max_header_size = 8192
+
+
+# By default the maximum number of allowed headers depends on the number of max
+# allowed metadata settings plus a default value of 32 for regular http
+# headers.  If for some reason this is not enough (custom middleware for
+# example) it can be increased with the extra_header_count constraint.
+
+#extra_header_count = 0
+
+
+# max_object_name_length is the max number of bytes in the utf8 encoding
+# of an object name
+
+#max_object_name_length = 1024
+
+
+# container_listing_limit is the default (and max) number of items
+# returned for a container listing request
+
+#container_listing_limit = 10000
+
+
+# account_listing_limit is the default (and max) number of items returned
+# for an account listing request
+#account_listing_limit = 10000
+
+
+# max_account_name_length is the max number of bytes in the utf8 encoding
+# of an account name
+
+#max_account_name_length = 256
+
+
+# max_container_name_length is the max number of bytes in the utf8 encoding
+# of a container name
+
+#max_container_name_length = 256
+
+
+# By default all REST API calls should use "v1" or "v1.0" as the version string,
+# for example "/v1/account". This can be manually overridden to make this
+# backward-compatible, in case a different version string has been used before.
+# Use a comma-separated list in case of multiple allowed versions, for example
+# valid_api_versions = v0,v1,v2
+# This is only enforced for account, container and object requests. The allowed
+# api versions are by default excluded from /info.
+
+# valid_api_versions = v1,v1.0