use new options instead of deprecated options for glance

JIRA: COMPASS-247

Change-Id: If034fad5a17d6b1d462ae1a54bdb5d641173d720
Signed-off-by: carey.xu <carey.xuhan@huawei.com>
(cherry picked from commit 4b9e28352916ff617082393c6596b4c1552656da)

2 files changed, 83 insertions, 815 deletions

diff --git a/deploy/adapters/ansible/roles/glance/templates/glance-api.conf b/deploy/adapters/ansible/roles/glance/templates/glance-api.conf
index ab63e054..9be29f4f 100644
--- a/deploy/adapters/ansible/roles/glance/templates/glance-api.conf
+++ b/deploy/adapters/ansible/roles/glance/templates/glance-api.conf
@@ -1,656 +1,56 @@
+{% set workers = ansible_processor_vcpus // 2 %}
+{% set workers = workers if workers else 1 %}
+{% set memcached_servers = [] %}
+{% set rabbitmq_servers = [] %}
+{% for host in haproxy_hosts.values() %}
+{% set _ = memcached_servers.append('%s:11211'% host) %}
+{% set _ = rabbitmq_servers.append('%s:5672'% host) %}
+{% endfor %}
+{% set memcached_servers = memcached_servers|join(',') %}
+{% set rabbitmq_servers = rabbitmq_servers|join(',') %}
+
 [DEFAULT]
-# Show more verbose log output (sets INFO log level output)
 verbose = {{ VERBOSE }}
-
-# Show debugging output in logs (sets DEBUG log level output)
 debug = {{ DEBUG }}
-
-# Which backend scheme should Glance use by default is not specified
-# in a request to add a new image to Glance? Known schemes are determined
-# by the known_stores option below.
-# Default: 'file'
-# "default_store" option has been moved to [glance_store] section in
-# Juno release
-
-# List of which store classes and store class locations are
-# currently known to glance at startup.
-# Existing but disabled stores:
-#      glance.store.rbd.Store,
-#      glance.store.s3.Store,
-#      glance.store.swift.Store,
-#      glance.store.sheepdog.Store,
-#      glance.store.cinder.Store,
-#      glance.store.gridfs.Store,
-#      glance.store.vmware_datastore.Store,
-#known_stores = glance.store.filesystem.Store,
-#               glance.store.http.Store
-
-
-# Maximum image size (in bytes) that may be uploaded through the
-# Glance API server. Defaults to 1 TB.
-# WARNING: this value should only be increased after careful consideration
-# and must be set to a value under 8 EB (9223372036854775808).
-#image_size_cap = 1099511627776
-
-# Address to bind the API server
+log_file = /var/log/glance/api.log
 bind_host = {{ image_host }}
-
-# Port the bind the API server to
 bind_port = 9292
-
-# Log to this file. Make sure you do not set the same log file for both the API
-# and registry servers!
-#
-# If `log_file` is omitted and `use_syslog` is false, then log messages are
-# sent to stdout as a fallback.
-log_file = /var/log/glance/api.log
-
-# Backlog requests when creating socket
 backlog = 4096
-
-# TCP_KEEPIDLE value in seconds when creating socket.
-# Not supported on OS X.
-#tcp_keepidle = 600
-
-# API to use for accessing data. Default value points to sqlalchemy
-# package, it is also possible to use: glance.db.registry.api
-# data_api = glance.db.sqlalchemy.api
-
-# Number of Glance API worker processes to start.
-# On machines with more than one CPU increasing this value
-# may improve performance (especially if using SSL with
-# compression turned on). It is typically recommended to set
-# this value to the number of CPUs present on your machine.
-workers = 1
-
-# Maximum line size of message headers to be accepted.
-# max_header_line may need to be increased when using large tokens
-# (typically those generated by the Keystone v3 API with big service
-# catalogs)
-# max_header_line = 16384
-
-# Role used to identify an authenticated user as administrator
-#admin_role = admin
-
-# Allow unauthenticated users to access the API with read-only
-# privileges. This only applies when using ContextMiddleware.
-#allow_anonymous_access = False
-
-# Allow access to version 1 of glance api
-#enable_v1_api = True
-
-# Allow access to version 2 of glance api
-#enable_v2_api = True
-
-# Return the URL that references where the data is stored on
-# the backend storage system.  For example, if using the
-# file system store a URL of 'file:///path/to/image' will
-# be returned to the user in the 'direct_url' meta-data field.
-# The default value is false.
-#show_image_direct_url = False
-
-# Send headers containing user and tenant information when making requests to
-# the v1 glance registry. This allows the registry to function as if a user is
-# authenticated without the need to authenticate a user itself using the
-# auth_token middleware.
-# The default value is false.
-#send_identity_headers = False
-
-# Supported values for the 'container_format' image attribute
-#container_formats=ami,ari,aki,bare,ovf,ova
-
-# Supported values for the 'disk_format' image attribute
-#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso
-
-# Directory to use for lock files. Default to a temp directory
-# (string value). This setting needs to be the same for both
-# glance-scrubber and glance-api.
-#lock_path=<None>
-
-# Property Protections config file
-# This file contains the rules for property protections and the roles/policies
-# associated with it.
-# If this config value is not specified, by default, property protections
-# won't be enforced.
-# If a value is specified and the file is not found, then the glance-api
-# service will not start.
-#property_protection_file =
-
-# Specify whether 'roles' or 'policies' are used in the
-# property_protection_file.
-# The default value for property_protection_rule_format is 'roles'.
-#property_protection_rule_format = roles
-
-# Specifies how long (in hours) a task is supposed to live in the tasks DB
-# after succeeding or failing before getting soft-deleted.
-# The default value for task_time_to_live is 48 hours.
-# task_time_to_live = 48
-
-# This value sets what strategy will be used to determine the image location
-# order. Currently two strategies are packaged with Glance 'location_order'
-# and 'store_type'.
-#location_strategy = location_order
-
-# ================= Syslog Options ============================
-
-# Send logs to syslog (/dev/log) instead of to file specified
-# by `log_file`
-#use_syslog = False
-
-# Facility to use. If unset defaults to LOG_USER.
-#syslog_log_facility = LOG_LOCAL0
-
-# ================= SSL Options ===============================
-
-# Certificate file to use when starting API server securely
-#cert_file = /path/to/certfile
-
-# Private key file to use when starting API server securely
-#key_file = /path/to/keyfile
-
-# CA certificate file to use to verify connecting clients
-#ca_file = /path/to/cafile
-
-# ================= Security Options ==========================
-
-# AES key for encrypting store 'location' metadata, including
-# -- if used -- Swift or S3 credentials
-# Should be set to a random string of length 16, 24 or 32 bytes
-#metadata_encryption_key = <16, 24 or 32 char registry metadata key>
-
-# ============ Registry Options ===============================
-
-# Address to find the registry server
+workers = {{ workers }}
 registry_host = {{ internal_ip }}
-
-# Port the registry server is listening on
 registry_port = 9191
-
-# What protocol to use when connecting to the registry server?
-# Set to https for secure HTTP communication
 registry_client_protocol = http
+cinder_catalog_info = volume:cinder:internalURL
 
-# The path to the key file to use in SSL connections to the
-# registry server, if any. Alternately, you may set the
-# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file
-#registry_client_key_file = /path/to/key/file
-
-# The path to the cert file to use in SSL connections to the
-# registry server, if any. Alternately, you may set the
-# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file
-#registry_client_cert_file = /path/to/cert/file
-
-# The path to the certifying authority cert file to use in SSL connections
-# to the registry server, if any. Alternately, you may set the
-# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file
-#registry_client_ca_file = /path/to/ca/file
-
-# When using SSL in connections to the registry server, do not require
-# validation via a certifying authority. This is the registry's equivalent of
-# specifying --insecure on the command line using glanceclient for the API
-# Default: False
-#registry_client_insecure = False
-
-# The period of time, in seconds, that the API server will wait for a registry
-# request to complete. A value of '0' implies no timeout.
-# Default: 600
-#registry_client_timeout = 600
-
-# Whether to automatically create the database tables.
-# Default: False
-#db_auto_create = False
-
-# Enable DEBUG log messages from sqlalchemy which prints every database
-# query and response.
-# Default: False
-#sqlalchemy_debug = True
-
-# Pass the user's token through for API requests to the registry.
-# Default: True
-#use_user_token = True
-
-# If 'use_user_token' is not in effect then admin credentials
-# can be specified. Requests to the registry on behalf of
-# the API will use these credentials.
-# Admin user name
-#admin_user = None
-# Admin password
-#admin_password = None
-# Admin tenant name
-#admin_tenant_name = None
-# Keystone endpoint
-#auth_url = None
-# Keystone region
-#auth_region = None
-# Auth strategy
-#auth_strategy = keystone
-
-# ============ Notification System Options =====================
-
-# Notifications can be sent when images are create, updated or deleted.
-# There are three methods of sending notifications, logging (via the
-# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid
-# message queue), or noop (no notifications sent, the default)
-# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver`
-# notifier_strategy = default
-
-# Driver or drivers to handle sending notifications
-# notification_driver = noop
-
-# Default publisher_id for outgoing notifications.
-# default_publisher_id = image.localhost
-
-# Configuration options if sending notifications via rabbitmq (these are
-# the defaults)
-rabbit_host = localhost
-rabbit_port = 5672
-rabbit_use_ssl = false
-rabbit_userid = {{ RABBIT_USER }}
-rabbit_password = {{ RABBIT_PASS }}
-rabbit_virtual_host = /
-rabbit_notification_exchange = glance
-rabbit_notification_topic = notifications
-rabbit_durable_queues = False
-
-# Configuration options if sending notifications via Qpid (these are
-# the defaults)
-qpid_notification_exchange = glance
-qpid_notification_topic = notifications
-qpid_hostname = localhost
-qpid_port = 5672
-qpid_username =
-qpid_password =
-qpid_sasl_mechanisms =
-qpid_reconnect_timeout = 0
-qpid_reconnect_limit = 0
-qpid_reconnect_interval_min = 0
-qpid_reconnect_interval_max = 0
-qpid_reconnect_interval = 0
-qpid_heartbeat = 5
-# Set to 'ssl' to enable SSL
-qpid_protocol = tcp
-qpid_tcp_nodelay = True
-
-# ============ Filesystem Store Options ========================
-
-# Directory that the Filesystem backend store
-# writes image data to
-# this option has been moved to [glance_store] for Juno release
-# filesystem_store_datadir = /var/lib/glance/images/
-
-# A list of directories where image data can be stored.
-# This option may be specified multiple times for specifying multiple store
-# directories. Either one of filesystem_store_datadirs or
-# filesystem_store_datadir option is required. A priority number may be given
-# after each directory entry, separated by a ":".
-# When adding an image, the highest priority directory will be selected, unless
-# there is not enough space available in cases where the image size is already
-# known. If no priority is given, it is assumed to be zero and the directory
-# will be considered for selection last. If multiple directories have the same
-# priority, then the one with the most free space available is selected.
-# If same store is specified multiple times then BadStoreConfiguration
-# exception will be raised.
-#filesystem_store_datadirs = /var/lib/glance/images/:1
-
-# A path to a JSON file that contains metadata describing the storage
-# system.  When show_multiple_locations is True the information in this
-# file will be returned with any location that is contained in this
-# store.
-#filesystem_store_metadata_file = None
-
-# ============ Swift Store Options =============================
-
-# Version of the authentication service to use
-# Valid versions are '2' for keystone and '1' for swauth and rackspace
-swift_store_auth_version = 2
-
-# Address where the Swift authentication service lives
-# Valid schemes are 'http://' and 'https://'
-# If no scheme specified,  default to 'https://'
-# For swauth, use something like '127.0.0.1:8080/v1.0/'
-swift_store_auth_address = 127.0.0.1:5000/v2.0/
-
-# User to authenticate against the Swift authentication service
-# If you use Swift authentication service, set it to 'account':'user'
-# where 'account' is a Swift storage account and 'user'
-# is a user in that account
-swift_store_user = jdoe:jdoe
-
-# Auth key for the user authenticating against the
-# Swift authentication service
-swift_store_key = a86850deb2742ec3cb41518e26aa2d89
-
-# Container within the account that the account should use
-# for storing images in Swift
-swift_store_container = glance
-
-# Do we create the container if it does not exist?
-swift_store_create_container_on_put = False
-
-# What size, in MB, should Glance start chunking image files
-# and do a large object manifest in Swift? By default, this is
-# the maximum object size in Swift, which is 5GB
-swift_store_large_object_size = 5120
-
-# When doing a large object manifest, what size, in MB, should
-# Glance write chunks to Swift? This amount of data is written
-# to a temporary disk buffer during the process of chunking
-# the image file, and the default is 200MB
-swift_store_large_object_chunk_size = 200
-
-# Whether to use ServiceNET to communicate with the Swift storage servers.
-# (If you aren't RACKSPACE, leave this False!)
-#
-# To use ServiceNET for authentication, prefix hostname of
-# `swift_store_auth_address` with 'snet-'.
-# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
-swift_enable_snet = False
-
-# If set to True enables multi-tenant storage mode which causes Glance images
-# to be stored in tenant specific Swift accounts.
-#swift_store_multi_tenant = False
-
-# A list of swift ACL strings that will be applied as both read and
-# write ACLs to the containers created by Glance in multi-tenant
-# mode. This grants the specified tenants/users read and write access
-# to all newly created image objects. The standard swift ACL string
-# formats are allowed, including:
-# <tenant_id>:<username>
-# <tenant_name>:<username>
-# *:<username>
-# Multiple ACLs can be combined using a comma separated list, for
-# example: swift_store_admin_tenants = service:glance,*:admin
-#swift_store_admin_tenants =
-
-# The region of the swift endpoint to be used for single tenant. This setting
-# is only necessary if the tenant has multiple swift endpoints.
-#swift_store_region =
-
-# If set to False, disables SSL layer compression of https swift requests.
-# Setting to 'False' may improve performance for images which are already
-# in a compressed format, eg qcow2. If set to True, enables SSL layer
-# compression (provided it is supported by the target swift proxy).
-#swift_store_ssl_compression = True
+enable_v1_api = True
+enable_v1_registry = True
+enable_v2_api = True
+enable_v2_registry = True
 
-# The number of times a Swift download will be retried before the
-# request fails
-#swift_store_retry_get_count = 0
+notification_driver = messagingv2
+rpc_backend = rabbit
 
-# ============ S3 Store Options =============================
-
-# Address where the S3 authentication service lives
-# Valid schemes are 'http://' and 'https://'
-# If no scheme specified,  default to 'http://'
-s3_store_host = 127.0.0.1:8080/v1.0/
-
-# User to authenticate against the S3 authentication service
-s3_store_access_key = <20-char AWS access key>
-
-# Auth key for the user authenticating against the
-# S3 authentication service
-s3_store_secret_key = <40-char AWS secret key>
-
-# Container within the account that the account should use
-# for storing images in S3. Note that S3 has a flat namespace,
-# so you need a unique bucket name for your glance images. An
-# easy way to do this is append your AWS access key to "glance".
-# S3 buckets in AWS *must* be lowercased, so remember to lowercase
-# your AWS access key if you use it in your bucket name below!
-s3_store_bucket = <lowercased 20-char aws access key>glance
-
-# Do we create the bucket if it does not exist?
-s3_store_create_bucket_on_put = False
-
-# When sending images to S3, the data will first be written to a
-# temporary buffer on disk. By default the platform's temporary directory
-# will be used. If required, an alternative directory can be specified here.
-#s3_store_object_buffer_dir = /path/to/dir
-
-# When forming a bucket url, boto will either set the bucket name as the
-# subdomain or as the first token of the path. Amazon's S3 service will
-# accept it as the subdomain, but Swift's S3 middleware requires it be
-# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'.
-#s3_store_bucket_url_format = subdomain
-
-# ============ RBD Store Options =============================
-
-# Ceph configuration file path
-# If using cephx authentication, this file should
-# include a reference to the right keyring
-# in a client.<USER> section
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-# RADOS user to authenticate as (only applicable if using cephx)
-# If <None>, a default will be chosen based on the client. section
-# in rbd_store_ceph_conf
-#rbd_store_user = <None>
-
-# RADOS pool in which images are stored
-#rbd_store_pool = images
-
-# RADOS images will be chunked into objects of this size (in megabytes).
-# For best performance, this should be a power of two
-#rbd_store_chunk_size = 8
-
-# ============ Sheepdog Store Options =============================
-
-sheepdog_store_address = localhost
-
-sheepdog_store_port = 7000
-
-# Images will be chunked into objects of this size (in megabytes).
-# For best performance, this should be a power of two
-sheepdog_store_chunk_size = 64
-
-# ============ Cinder Store Options ===============================
-
-# Info to match when looking for cinder in the service catalog
-# Format is : separated values of the form:
-# <service_type>:<service_name>:<endpoint_type> (string value)
-#cinder_catalog_info = volume:cinder:publicURL
-
-# Override service catalog lookup with template for cinder endpoint
-# e.g. http://localhost:8776/v1/%(project_id)s (string value)
-#cinder_endpoint_template = <None>
-
-# Region name of this node (string value)
-#os_region_name = <None>
-
-# Location of ca certicates file to use for cinder client requests
-# (string value)
-#cinder_ca_certificates_file = <None>
-
-# Number of cinderclient retries on failed http calls (integer value)
-#cinder_http_retries = 3
-
-# Allow to perform insecure SSL requests to cinder (boolean value)
-#cinder_api_insecure = False
-
-# ============ VMware Datastore Store Options =====================
-
-# ESX/ESXi or vCenter Server target system.
-# The server value can be an IP address or a DNS name
-# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com
-#vmware_server_host = <None>
-
-# Server username (string value)
-#vmware_server_username = <None>
-
-# Server password (string value)
-#vmware_server_password = <None>
-
-# Inventory path to a datacenter (string value)
-# Value optional when vmware_server_ip is an ESX/ESXi host: if specified
-# should be `ha-datacenter`.
-#vmware_datacenter_path = <None>
-
-# Datastore associated with the datacenter (string value)
-#vmware_datastore_name = <None>
-
-# The number of times we retry on failures
-# e.g., socket error, etc (integer value)
-#vmware_api_retry_count = 10
-
-# The interval used for polling remote tasks
-# invoked on VMware ESX/VC server in seconds (integer value)
-#vmware_task_poll_interval = 5
-
-# Absolute path of the folder containing the images in the datastore
-# (string value)
-#vmware_store_image_dir = /openstack_glance
-
-# Allow to perform insecure SSL requests to the target system (boolean value)
-#vmware_api_insecure = False
-
-# ============ Delayed Delete Options =============================
-
-# Turn on/off delayed delete
 delayed_delete = False
-
-# Delayed delete time in seconds
-scrub_time = 43200
-
-# Directory that the scrubber will use to remind itself of what to delete
-# Make sure this is also set in glance-scrubber.conf
 scrubber_datadir = /var/lib/glance/scrubber
-
-# =============== Quota Options ==================================
-
-# The maximum number of image members allowed per image
-#image_member_quota = 128
-
-# The maximum number of image properties allowed per image
-#image_property_quota = 128
-
-# The maximum number of tags allowed per image
-#image_tag_quota = 128
-
-# The maximum number of locations allowed per image
-#image_location_quota = 10
-
-# Set a system wide quota for every user.  This value is the total number
-# of bytes that a user can use across all storage systems.  A value of
-# 0 means unlimited.
-#user_storage_quota = 0
-
-# =============== Image Cache Options =============================
-
-# Base directory that the Image Cache uses
+scrub_time = 43200
 image_cache_dir = /var/lib/glance/image-cache/
+show_image_direct_url = True
 
-# =============== Manager Options =================================
-
-# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE.
-# Whether or not to enforce that all DB tables have charset utf8.
-# If your database tables do not have charset utf8 you will
-# need to convert before this option is removed. This option is
-# only relevant if your database engine is MySQL.
-#db_enforce_mysql_charset = True
-
-# =============== Glance Store ====================================
-[glance_store]
-# Moved from [DEFAULT], for Juno release
-default_store = file
-filesystem_store_datadir = /var/lib/glance/images/
-
-# =============== Database Options =================================
+[task]
+task_executor = taskflow
 
 [database]
-# The file name to use with SQLite (string value)
-sqlite_db = /var/lib/glance/glance.sqlite
-
-# If True, SQLite uses synchronous mode (boolean value)
-#sqlite_synchronous = True
-
-# The backend to use for db (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
 backend = sqlalchemy
-
-# The SQLAlchemy connection string used to connect to the
-# database (string value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance
-
-# The SQL mode to be used for MySQL sessions. This option,
-# including the default, overrides any server-set SQL mode. To
-# use whatever SQL mode is set by the server configuration,
-# set this to no value. Example: mysql_sql_mode= (string
-# value)
-#mysql_sql_mode = TRADITIONAL
-
-# Timeout before idle sql connections are reaped (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
+connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance?charset=utf8
 idle_timeout = 30
 
-# Minimum number of SQL connections to keep open in a pool
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = <None>
-
-# Maximum db connection retries during startup. (setting -1
-# implies an infinite retry count) (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a sql connection
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with sqlalchemy
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = <None>
-
-# Verbosity of SQL debugging information. 0=None,
-# 100=Everything (integer value)
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add python stack traces to SQL as comment strings (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = False
-
-# If set, use this value for pool_timeout with sqlalchemy
-# (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on
-# connection lost (boolean value)
-#use_db_reconnect = False
-
-# seconds between db connection retries (integer value)
-#db_retry_interval = 1
-
-# Whether to increase interval between db connection retries,
-# up to db_max_retry_interval (boolean value)
-#db_inc_retry_interval = True
-
-# max seconds between db connection retries, if
-# db_inc_retry_interval is enabled (integer value)
-#db_max_retry_interval = 10
+[glance_store]
+default_store = file
+stores = file,http,cinder,rbd
+filesystem_store_datadir = /var/lib/glance/images/
 
-# maximum db connection retries before error is raised.
-# (setting -1 implies an infinite retry count) (integer value)
-#db_max_retries = 20
+[profiler]
+enabled = True
 
 [keystone_authtoken]
 auth_uri = http://{{ internal_vip.ip }}:5000/v2.0
@@ -658,20 +58,22 @@ identity_uri = http://{{ internal_vip.ip }}:35357
 admin_tenant_name = service
 admin_user = glance
 admin_password = {{ GLANCE_PASS }}
+memcached_servers = {{ memcached_servers }}
+token_cache_time = 300
+revocation_cache_time = 60
 
 [paste_deploy]
-# Name of the paste configuration file that defines the available pipelines
-#config_file = glance-api-paste.ini
-
-# Partial name of a pipeline in your paste configuration file with the
-# service name removed. For example, if your paste section name is
-# [pipeline:glance-api-keystone], you would configure the flavor below
-# as 'keystone'.
 flavor= keystone
 
-[store_type_location_strategy]
-# The scheme list to use to get store preference order. The scheme must be
-# registered by one of the stores defined by the 'known_stores' config option.
-# This option will be applied when you using 'store_type' option as image
-# location strategy defined by the 'location_strategy' config option.
-#store_type_preference =
+[oslo_messaging_amqp]
+idle_timeout = 7200
+
+[oslo_messaging_rabbit]
+rabbit_hosts = {{ rabbitmq_servers }}
+rabbit_use_ssl = false
+rabbit_userid = {{ RABBIT_USER }}
+rabbit_password = {{ RABBIT_PASS }}
+rabbit_virtual_host = /
+rabbit_notification_exchange = glance
+rabbit_notification_topic = notifications
+rabbit_durable_queues = False
diff --git a/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf b/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf
index 06c403fd..8453b966 100644
--- a/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf
+++ b/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf
@@ -1,176 +1,33 @@
-[DEFAULT]
-# Show more verbose log output (sets INFO log level output)
-#verbose = False
-
-# Show debugging output in logs (sets DEBUG log level output)
-#debug = False
-
-# Address to bind the registry server
-bind_host = {{ internal_ip }}
+{% set workers = ansible_processor_vcpus // 2 %}
+{% set workers = workers if workers else 1 %}
+{% set memcached_servers = [] %}
+{% set rabbitmq_servers = [] %}
+{% for host in haproxy_hosts.values() %}
+{% set _ = memcached_servers.append('%s:11211'% host) %}
+{% set _ = rabbitmq_servers.append('%s:5672'% host) %}
+{% endfor %}
+{% set memcached_servers = memcached_servers|join(',') %}
+{% set rabbitmq_servers = rabbitmq_servers|join(',') %}
 
-# Port the bind the registry server to
+[DEFAULT]
+verbose = {{ VERBOSE }}
+debug = {{ DEBUG }}
+log_file = /var/log/glance/api.log
+bind_host = {{ image_host }}
 bind_port = 9191
-
-# Log to this file. Make sure you do not set the same log file for both the API
-# and registry servers!
-#
-# If `log_file` is omitted and `use_syslog` is false, then log messages are
-# sent to stdout as a fallback.
-log_file = /var/log/glance/registry.log
-
-# Backlog requests when creating socket
 backlog = 4096
+workers = {{ workers }}
 
-# TCP_KEEPIDLE value in seconds when creating socket.
-# Not supported on OS X.
-#tcp_keepidle = 600
-
-# API to use for accessing data. Default value points to sqlalchemy
-# package.
-#data_api = glance.db.sqlalchemy.api
-
-# Enable Registry API versions individually or simultaneously
-#enable_v1_registry = True
-#enable_v2_registry = True
-
-# Limit the api to return `param_limit_max` items in a call to a container. If
-# a larger `limit` query param is provided, it will be reduced to this value.
-api_limit_max = 1000
-
-# If a `limit` query param is not provided in an api request, it will
-# default to `limit_param_default`
-limit_param_default = 25
-
-# Role used to identify an authenticated user as administrator
-#admin_role = admin
-
-# Whether to automatically create the database tables.
-# Default: False
-#db_auto_create = False
-
-# Enable DEBUG log messages from sqlalchemy which prints every database
-# query and response.
-# Default: False
-#sqlalchemy_debug = True
-
-# ================= Syslog Options ============================
-
-# Send logs to syslog (/dev/log) instead of to file specified
-# by `log_file`
-#use_syslog = False
-
-# Facility to use. If unset defaults to LOG_USER.
-#syslog_log_facility = LOG_LOCAL1
-
-# ================= SSL Options ===============================
-
-# Certificate file to use when starting registry server securely
-#cert_file = /path/to/certfile
-
-# Private key file to use when starting registry server securely
-#key_file = /path/to/keyfile
-
-# CA certificate file to use to verify connecting clients
-#ca_file = /path/to/cafile
-
-# ================= Database Options ==========================
+notification_driver = messagingv2
+rpc_backend = rabbit
 
 [database]
-# The file name to use with SQLite (string value)
-sqlite_db = /var/lib/glance/glance.sqlite
-
-# If True, SQLite uses synchronous mode (boolean value)
-#sqlite_synchronous = True
-
-# The backend to use for db (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
 backend = sqlalchemy
-
-# The SQLAlchemy connection string used to connect to the
-# database (string value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance
-
-# The SQL mode to be used for MySQL sessions. This option,
-# including the default, overrides any server-set SQL mode. To
-# use whatever SQL mode is set by the server configuration,
-# set this to no value. Example: mysql_sql_mode= (string
-# value)
-#mysql_sql_mode = TRADITIONAL
-
-# Timeout before idle sql connections are reaped (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
+connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance?charset=utf8
 idle_timeout = 30
 
-# Minimum number of SQL connections to keep open in a pool
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = <None>
-
-# Maximum db connection retries during startup. (setting -1
-# implies an infinite retry count) (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a sql connection
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with sqlalchemy
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = <None>
-
-# Verbosity of SQL debugging information. 0=None,
-# 100=Everything (integer value)
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add python stack traces to SQL as comment strings (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = False
-
-# If set, use this value for pool_timeout with sqlalchemy
-# (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on
-# connection lost (boolean value)
-#use_db_reconnect = False
-
-# seconds between db connection retries (integer value)
-#db_retry_interval = 1
-
-# Whether to increase interval between db connection retries,
-# up to db_max_retry_interval (boolean value)
-#db_inc_retry_interval = True
-
-# max seconds between db connection retries, if
-# db_inc_retry_interval is enabled (integer value)
-#db_max_retry_interval = 10
-
-# maximum db connection retries before error is raised.
-# (setting -1 implies an infinite retry count) (integer value)
-#db_max_retries = 20
+[profiler]
+enabled = True
 
 [keystone_authtoken]
 auth_uri = http://{{ internal_vip.ip }}:5000/v2.0
@@ -178,13 +35,22 @@ identity_uri = http://{{ internal_vip.ip }}:35357
 admin_tenant_name = service
 admin_user = glance
 admin_password = {{ GLANCE_PASS }}
+memcached_servers = {{ memcached_servers }}
+token_cache_time = 300
+revocation_cache_time = 60
 
 [paste_deploy]
-# Name of the paste configuration file that defines the available pipelines
-#config_file = glance-registry-paste.ini
-
-# Partial name of a pipeline in your paste configuration file with the
-# service name removed. For example, if your paste section name is
-# [pipeline:glance-registry-keystone], you would configure the flavor below
-# as 'keystone'.
 flavor= keystone
+
+[oslo_messaging_amqp]
+idle_timeout = 7200
+
+[oslo_messaging_rabbit]
+rabbit_hosts = {{ rabbitmq_servers }}
+rabbit_use_ssl = false
+rabbit_userid = {{ RABBIT_USER }}
+rabbit_password = {{ RABBIT_PASS }}
+rabbit_virtual_host = /
+rabbit_notification_exchange = glance
+rabbit_notification_topic = notifications
+rabbit_durable_queues = False