Merge "support Containerized compass-core"

2 files changed, 92 insertions, 0 deletions

diff --git a/deploy/adapters/ansible/roles/config-compute/templates/compute.j2 b/deploy/adapters/ansible/roles/config-compute/templates/compute.j2
new file mode 100644
index 00000000..8337fbcb
--- /dev/null
+++ b/deploy/adapters/ansible/roles/config-compute/templates/compute.j2
@@ -0,0 +1,81 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+
+# Physical interface
+auto eth0
+iface eth0 inet manual
+
+
+# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
+auto {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}}
+iface {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}} inet manual
+    vlan-raw-device {{sys_intf_mappings["mgmt"]["interface"]}}
+
+# Storage network VLAN interface (optional)
+auto {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}}
+iface {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}} inet manual
+    vlan-raw-device {{sys_intf_mappings["storage"]["interface"]}}
+
+# Container/Host management bridge
+auto br-mgmt
+iface br-mgmt inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports eth0
+    address {{host_info[inventory_hostname].MGMT_IP}}
+    netmask 255.255.255.0
+
+# compute1 VXLAN (tunnel/overlay) bridge config
+auto br-vxlan
+iface br-vxlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports {{sys_intf_mappings["mgmt"]["interface"]}}.{{sys_intf_mappings["mgmt"]["vlan_tag"]}}
+    address {{host_info[inventory_hostname].VXLAN_IP}}
+    netmask 255.255.252.0
+
+# OpenStack Networking VLAN bridge
+auto br-vlan
+iface br-vlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports {{ network_cfg["provider_net_mappings"][0]["interface"] }}
+    address {{ip_settings[inventory_hostname]["br-prv"]["ip"]}}
+    netmask 255.255.255.0
+    gateway {{ip_settings[inventory_hostname]["br-prv"]["gw"]}}
+    offload-sg off
+    # Create veth pair, don't bomb if already exists
+    pre-up ip link add br-vlan-veth type veth peer name eth12 || true
+    # Set both ends UP
+    pre-up ip link set br-vlan-veth up
+    pre-up ip link set eth12 up
+    # Delete veth pair on DOWN
+    post-down ip link del br-vlan-veth || true
+    bridge_ports br-vlan-veth
+
+# Add an additional address to br-vlan
+iface br-vlan inet static
+    # Flat network default gateway
+    # -- This needs to exist somewhere for network reachability
+    # -- from the router namespace for floating IP paths.
+    # -- Putting this here is primarily for tempest to work.
+    address {{host_info[inventory_hostname].VLAN_IP_SECOND}}
+    netmask 255.255.252.0
+
+# compute1 Storage bridge
+auto br-storage
+iface br-storage inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports {{sys_intf_mappings["storage"]["interface"]}}.{{sys_intf_mappings["storage"]["vlan_tag"]}}
+    address {{ip_settings[inventory_hostname]["storage"]["ip"]}}
+    netmask 255.255.252.0
diff --git a/deploy/adapters/ansible/roles/config-compute/templates/exports b/deploy/adapters/ansible/roles/config-compute/templates/exports
new file mode 100644
index 00000000..c2749c85
--- /dev/null
+++ b/deploy/adapters/ansible/roles/config-compute/templates/exports
@@ -0,0 +1,11 @@
+# /etc/exports: the access control list for filesystems which may be exported
+#               to NFS clients.  See exports(5).
+#
+# Example for NFSv2 and NFSv3:
+# /srv/homes       hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
+#
+# Example for NFSv4:
+# /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
+# /srv/nfs4/homes  gss/krb5i(rw,sync,no_subtree_check)
+#
+/images         *(rw,sync,no_subtree_check,no_root_squash)