support to assign ppa name when deploy openstack

JIRA: COMPASS-63

Change-Id: Ifdaa8a82e849291c1b5d5a48f9f678f5bb417a89
Signed-off-by: baigk <baiguoku@huawei.com>

14 files changed, 1410 insertions, 0 deletions

diff --git a/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml b/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml
new file mode 100644
index 00000000..692650b5
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml
@@ -0,0 +1,57 @@
+---
+- hosts: all
+  remote_user: root
+  sudo: True
+  roles:
+    - common
+    - setup-network
+
+- hosts: ha
+  remote_user: root
+  sudo: True
+  roles:
+    - ha
+
+- hosts: controller
+  remote_user: root
+  sudo: True
+  roles:
+    - database
+    - mq
+    - keystone
+    - nova-controller
+    - neutron-controller
+    - cinder-controller
+    - glance
+    - neutron-common
+    - neutron-network
+#    - ext-network
+    - dashboard
+
+- hosts: compute
+  remote_user: root
+  sudo: True
+  roles:
+    - nova-compute
+    - neutron-compute
+    - cinder-volume
+
+- hosts: all
+  remote_user: root
+  sudo: True
+  roles:
+    - odl_cluster
+
+- hosts: controller
+  remote_user: root
+  sudo: True
+  roles:
+    - ext-network
+
+
+- hosts: all
+  remote_user: root
+  sudo: True
+  roles:
+    - ceph-deploy
+    - monitor
diff --git a/deploy/adapters/ansible/openstack/allinone.yml b/deploy/adapters/ansible/openstack/allinone.yml
new file mode 100644
index 00000000..4539e5fb
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/allinone.yml
@@ -0,0 +1,32 @@
+---
+- hosts: controller
+  sudo: True
+  roles:
+    - common
+    - database
+    - mq
+    - keystone
+    - nova-controller
+    - neutron-controller
+    - dashboard
+    - cinder-controller
+    - glance
+
+- hosts: network
+  sudo: True
+  roles:
+    - common
+    - neutron-network
+
+- hosts: storage
+  sudo: True
+  roles:
+    - common
+    - cinder-volume
+
+- hosts: compute
+  sudo: True
+  roles:
+    - common
+    - nova-compute
+    - neutron-compute
diff --git a/deploy/adapters/ansible/openstack/compute.yml b/deploy/adapters/ansible/openstack/compute.yml
new file mode 100644
index 00000000..8f6100ca
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/compute.yml
@@ -0,0 +1,8 @@
+---
+- hosts: all
+  remote_user: vagrant
+  sudo: True
+  roles:
+    - common
+    - nova-compute
+    - neutron-compute
diff --git a/deploy/adapters/ansible/openstack/controller.yml b/deploy/adapters/ansible/openstack/controller.yml
new file mode 100644
index 00000000..0269281e
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/controller.yml
@@ -0,0 +1,14 @@
+---
+- hosts: controller
+  remote_user: root
+  sudo: True
+  roles:
+      - common
+      - database
+      - mq
+      - keystone
+      - nova-controller
+      - neutron-controller
+      - dashboard
+      - cinder-controller
+      - glance
diff --git a/deploy/adapters/ansible/openstack/group_vars/all b/deploy/adapters/ansible/openstack/group_vars/all
new file mode 100644
index 00000000..5643fcd9
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/group_vars/all
@@ -0,0 +1,54 @@
+controller_host: 10.1.0.11
+network_host: 10.1.0.12
+compute_host: 10.1.0.13
+storage_host: 10.1.0.14
+odl_controller: 10.1.0.15
+
+DEBUG: False
+VERBOSE: False
+NTP_SERVER_LOCAL: controller
+DB_HOST: "{{ controller_host }}"
+MQ_BROKER: rabbitmq
+
+OPENSTACK_REPO: cloudarchive-juno.list
+ADMIN_TOKEN: admin
+CEILOMETER_TOKEN: c095d479023a0fd58a54
+RABBIT_PASS: guest
+KEYSTONE_DBPASS: keystone_db_secret
+DEMO_PASS: demo_secret
+ADMIN_PASS: admin_secret
+GLANCE_DBPASS: glance_db_secret
+GLANCE_PASS: glance_secret
+NOVA_DBPASS: nova_db_secret
+NOVA_PASS: nova_secret
+DASH_DBPASS: dash_db_secret
+CINDER_DBPASS: cinder_db_secret
+CINDER_PASS: cinder_secret
+NEUTRON_DBPASS: neutron_db_secret
+NEUTRON_PASS: netron_secret
+NEUTRON_TYPE_DRIVERS: ['flat', 'gre', 'vxlan']
+NEUTRON_TENANT_NETWORK_TYPES: ['vxlan']
+#NEUTRON_MECHANISM_DRIVERS: ['opendaylight']
+NEUTRON_MECHANISM_DRIVERS: ['openvswitch']
+NEUTRON_TUNNEL_TYPES: ['vxlan']
+METADATA_SECRET: metadata_secret
+INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS: 10.1.1.21
+INTERFACE_NAME: eth2
+
+EXTERNAL_NETWORK_CIDR: 203.0.113.0/24
+EXTERNAL_NETWORK_GATEWAY: 203.0.113.1
+FLOATING_IP_START: 203.0.113.101
+FLOATING_IP_END: 203.0.113.200
+
+juno_cloud_archive: deb http://ubuntu-cloud.archive.canonical.com/ubuntu trusty-updates/juno main
+build_in_image: http://cdn.download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img
+build_in_image_name: cirros-0.3.3-x86_64-disk.img
+
+physical_device: /dev/sdb
+
+internal_interface: ansible_eth1
+internal_ip: "{{ hostvars[inventory_hostname][internal_interface]['ipv4']['address'] }}"
+
+odl_username: admin
+odl_password: admin
+odl_api_port: 8080
diff --git a/deploy/adapters/ansible/openstack/multinodes.yml b/deploy/adapters/ansible/openstack/multinodes.yml
new file mode 100644
index 00000000..5b43a696
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/multinodes.yml
@@ -0,0 +1,73 @@
+---
+- hosts: database
+  sudo: True
+  roles:
+    - common
+    - database
+
+- hosts: messaging
+  sudo: True
+  roles:
+    - common
+    - mq
+
+- hosts: identity
+  sudo: True
+  roles:
+    - common
+    - keystone
+
+- hosts: compute-controller
+  sudo: True
+  roles:
+    - common
+    - nova-controller
+
+- hosts: network-server
+  sudo: True
+  roles:
+    - common
+    - neutron-controller
+
+- hosts: storage-controller
+  sudo: True
+  roles:
+    - common
+    - cinder-controller
+
+- hosts: image
+  sudo: True
+  roles:
+    - common
+    - glance
+
+- hosts: dashboard
+  sudo: True
+  roles:
+    - common
+    - dashboard
+
+- hosts: network-worker
+  sudo: True
+  roles:
+    - common
+    - neutron-network
+
+- hosts: storage-volume
+  sudo: True
+  roles:
+    - common
+    - cinder-volume
+
+- hosts: compute-worker
+  sudo: True
+  roles:
+    - common
+    - nova-compute
+    - neutron-compute
+
+- hosts: odl
+  remote_user: root
+  sudo: True
+  roles:
+    - odl
diff --git a/deploy/adapters/ansible/openstack/network.yml b/deploy/adapters/ansible/openstack/network.yml
new file mode 100644
index 00000000..77752e45
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/network.yml
@@ -0,0 +1,7 @@
+---
+- hosts: all
+  remote_user: vagrant
+  sudo: True
+  roles:
+    - common
+    - neutron-network
diff --git a/deploy/adapters/ansible/openstack/single-controller.yml b/deploy/adapters/ansible/openstack/single-controller.yml
new file mode 100644
index 00000000..96ec0a6a
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/single-controller.yml
@@ -0,0 +1,38 @@
+---
+- hosts: controller
+  sudo: True
+  roles:
+    - common
+    - database
+    - mq
+    - keystone
+    - nova-controller
+    - neutron-controller
+    - dashboard
+    - cinder-controller
+    - glance
+
+- hosts: network
+  sudo: True
+  roles:
+    - common
+    - neutron-network
+
+- hosts: storage
+  sudo: True
+  roles:
+    - common
+    - cinder-volume
+
+- hosts: compute
+  sudo: True
+  roles:
+    - common
+    - nova-compute
+    - neutron-compute
+
+- hosts: odl
+  remote_user: root
+  sudo: True
+  roles:
+    - odl
diff --git a/deploy/adapters/ansible/openstack/storage.yml b/deploy/adapters/ansible/openstack/storage.yml
new file mode 100644
index 00000000..f0be1381
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/storage.yml
@@ -0,0 +1,7 @@
+---
+- hosts: all
+  remote_user: vagrant
+  sudo: True
+  roles:
+    - common
+    - cinder-volume
diff --git a/deploy/adapters/ansible/openstack/templates/dnsmasq-neutron.conf b/deploy/adapters/ansible/openstack/templates/dnsmasq-neutron.conf
new file mode 100644
index 00000000..7bcbd9df
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/templates/dnsmasq-neutron.conf
@@ -0,0 +1,2 @@
+dhcp-option-force=26,1454
+
diff --git a/deploy/adapters/ansible/openstack/templates/ml2_conf.ini b/deploy/adapters/ansible/openstack/templates/ml2_conf.ini
new file mode 100644
index 00000000..7b3e76da
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/templates/ml2_conf.ini
@@ -0,0 +1,113 @@
+[ml2]
+# (ListOpt) List of network type driver entrypoints to be loaded from
+# the neutron.ml2.type_drivers namespace.
+#
+# type_drivers = local,flat,vlan,gre,vxlan
+# Example: type_drivers = flat,vlan,gre,vxlan
+type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }}
+
+# (ListOpt) Ordered list of network_types to allocate as tenant
+# networks. The default value 'local' is useful for single-box testing
+# but provides no connectivity between hosts.
+#
+# tenant_network_types = local
+# Example: tenant_network_types = vlan,gre,vxlan
+tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }}
+
+# (ListOpt) Ordered list of networking mechanism driver entrypoints
+# to be loaded from the neutron.ml2.mechanism_drivers namespace.
+# mechanism_drivers =
+# Example: mechanism_drivers = openvswitch,mlnx
+# Example: mechanism_drivers = arista
+# Example: mechanism_drivers = cisco,logger
+# Example: mechanism_drivers = openvswitch,brocade
+# Example: mechanism_drivers = linuxbridge,brocade
+mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }}
+
+[ml2_type_flat]
+# (ListOpt) List of physical_network names with which flat networks
+# can be created. Use * to allow flat networks with arbitrary
+# physical_network names.
+#
+flat_networks = *
+# Example:flat_networks = physnet1,physnet2
+# Example:flat_networks = *
+
+[ml2_type_vlan]
+# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples
+# specifying physical_network names usable for VLAN provider and
+# tenant networks, as well as ranges of VLAN tags on each
+# physical_network available for allocation as tenant networks.
+#
+network_vlan_ranges = {{ NEUTRON_VLAN_RANGES|join(",") }}
+# Example: network_vlan_ranges = physnet1:1000:2999,physnet2
+
+[ml2_type_gre]
+# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation
+tunnel_id_ranges = 1:1000
+
+[ml2_type_vxlan]
+# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating
+# ranges of VXLAN VNI IDs that are available for tenant network allocation.
+#
+vni_ranges = 1001:4095
+
+# (StrOpt) Multicast group for the VXLAN interface. When configured, will
+# enable sending all broadcast traffic to this multicast group. When left
+# unconfigured, will disable multicast VXLAN mode.
+#
+vxlan_group = 239.1.1.1
+# Example: vxlan_group = 239.1.1.1
+
+[securitygroup]
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+enable_security_group = True
+
+[database]
+connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8
+
+[ovs]
+local_ip = {{ internal_ip }}
+{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %}
+integration_bridge = br-int
+{% if NEUTRON_TUNNEL_TYPES %}
+tunnel_bridge = br-tun
+tunnel_id_ranges = 1001:4095
+tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }}
+{% endif %}
+bridge_mappings = {{ NEUTRON_OVS_BRIDGE_MAPPINGS | join(",") }}
+{% endif %}
+
+[agent]
+root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf
+tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }}
+{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %}
+vxlan_udp_port = 4789
+{% endif %}
+l2_population = False
+
+[odl]
+{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %}
+network_vlan_ranges = 1001:4095
+{% if NEUTRON_TUNNEL_TYPES %}
+tunnel_id_ranges = 1001:4095
+tun_peer_patch_port = patch-int
+int_peer_patch_port = patch-tun
+tunnel_bridge = br-tun
+{% endif %}
+
+tenant_network_type = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }}
+integration_bridge = br-int
+controllers = 10.1.0.15:8080:admin:admin
+{% endif %}
+
+[ml2_odl]
+{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %}
+username = {{ odl_username }}
+password = {{ odl_password }}
+url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron
+{% endif %}
+
diff --git a/deploy/adapters/ansible/openstack/templates/neutron-network.conf b/deploy/adapters/ansible/openstack/templates/neutron-network.conf
new file mode 100644
index 00000000..63ac27ee
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/templates/neutron-network.conf
@@ -0,0 +1,465 @@
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+verbose = {{ VERBOSE }}
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+debug = {{ DEBUG }}
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+state_path = /var/lib/neutron
+
+# Where to store lock files
+lock_path = $state_path/lock
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+log_dir = /var/log/neutron
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ network_server_host }}
+
+# Port the bind the API server to
+bind_port = 9696
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+core_plugin = ml2
+# Example: core_plugin = ml2
+
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+service_plugins = router
+
+# Paste configuration file
+api_paste_config = api-paste.ini
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds)
+dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet
+# force_gateway_on_subnet = False
+
+
+# RPC configuration options. Defined in rpc __init__
+# The messaging module to use, defaults to kombu.
+# rpc_backend = neutron.openstack.common.rpc.impl_kombu
+rpc_backend = rabbit
+rabbit_host = {{ rabbit_host }}
+rabbit_password = {{ RABBIT_PASS }}
+
+# Size of RPC thread pool
+rpc_thread_pool_size = 240
+# Size of RPC connection pool
+rpc_conn_pool_size = 100
+# Seconds to wait for a response from call or multicall
+rpc_response_timeout = 300
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+rpc_cast_timeout = 300
+# Modules of exceptions that are permitted to be recreated
+# upon receiving exception data from an rpc call.
+# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception
+# AMQP exchange to connect to if using RabbitMQ or QPID
+# control_exchange = neutron
+
+# If passed, use a fake RabbitMQ provider
+# fake_rabbit = False
+
+# Configuration options if sending notifications via kombu rpc (these are
+# the defaults)
+# SSL version to use (valid only if SSL enabled)
+# kombu_ssl_version =
+# SSL key file (valid only if SSL enabled)
+# kombu_ssl_keyfile =
+# SSL cert file (valid only if SSL enabled)
+# kombu_ssl_certfile =
+# SSL certification authority file (valid only if SSL enabled)
+# kombu_ssl_ca_certs =
+# Port where RabbitMQ server is running/listening
+rabbit_port = 5672
+# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port'
+# rabbit_hosts = localhost:5672
+# User ID used for RabbitMQ connections
+rabbit_userid = {{ RABBIT_USER }}
+# Location of a virtual RabbitMQ installation.
+# rabbit_virtual_host = /
+# Maximum retries with trying to connect to RabbitMQ
+# (the default of 0 implies an infinite retry count)
+# rabbit_max_retries = 0
+# RabbitMQ connection retry interval
+# rabbit_retry_interval = 1
+# Use HA queues in RabbitMQ (x-ha-policy: all). You need to
+# wipe RabbitMQ database when changing this option. (boolean value)
+# rabbit_ha_queues = false
+# QPID
+# rpc_backend=neutron.openstack.common.rpc.impl_qpid
+# Qpid broker hostname
+# qpid_hostname = localhost
+# Qpid broker port
+# qpid_port = 5672
+# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port'
+# qpid_hosts = localhost:5672
+# Username for qpid connection
+# qpid_username = ''
+# Password for qpid connection
+# qpid_password = ''
+# Space separated list of SASL mechanisms to use for auth
+# qpid_sasl_mechanisms = ''
+# Seconds between connection keepalive heartbeats
+# qpid_heartbeat = 60
+# Transport to use, either 'tcp' or 'ssl'
+# qpid_protocol = tcp
+# Disable Nagle algorithm
+# qpid_tcp_nodelay = True
+
+# ZMQ
+# rpc_backend=neutron.openstack.common.rpc.impl_zmq
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address.
+# rpc_zmq_bind_address = *
+
+# ============ Notification System Options =====================
+
+# Notifications can be sent when network/subnet/port are created, updated or deleted.
+# There are three methods of sending notifications: logging (via the
+# log_file directive), rpc (via a message queue) and
+# noop (no notifications sent, the default)
+
+# Notification_driver can be defined multiple times
+# Do nothing driver
+# notification_driver = neutron.openstack.common.notifier.no_op_notifier
+# Logging driver
+# notification_driver = neutron.openstack.common.notifier.log_notifier
+# RPC driver.
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+
+# default_notification_level is used to form actual topic name(s) or to set logging level
+default_notification_level = INFO
+
+# default_publisher_id is a part of the notification payload
+# host = myhost.com
+# default_publisher_id = $host
+
+# Defined in rpc_notifier, can be comma separated values.
+# The actual topic names will be %s.%(default_notification_level)s
+notification_topics = notifications
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+api_workers = 8
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+rpc_workers = 8
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+notify_nova_on_port_data_changes = True
+
+# URL for connection to nova (Only supports one nova region currently).
+nova_url = http://{{ internal_vip.ip }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+nova_region_name = regionOne
+
+# Username for connection to nova in admin context
+nova_admin_username = nova
+
+# The uuid of the admin nova tenant
+
+# Password for connection to nova in admin context.
+nova_admin_password = {{ NOVA_PASS }}
+
+# Authorization URL for connection to nova in admin context.
+nova_admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0
+
+# Number of seconds between sending events to nova if there are any events to send
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+[quotas]
+# Default driver to use for quota checks
+quota_driver = neutron.db.quota_db.DbQuotaDriver
+
+# Resource name(s) that are supported in quota features
+quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+quota_network = 100
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+quota_subnet = 100
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+quota_port = 8000
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+quota_security_group = 1000
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+quota_security_group_rule = 1000
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitors = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the comand directly
+root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+auth_uri = http://{{ internal_vip.ip }}:5000/v2.0
+identity_uri = http://{{ internal_vip.ip }}:35357
+admin_tenant_name = service
+admin_user = neutron
+admin_password = {{ NEUTRON_PASS }}
+signing_dir = $state_path/keystone-signing
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+# connection = mysql://root:pass@127.0.0.1:3306/neutron
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite:////var/lib/neutron/neutron.sqlite
+#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron
+
+# The SQLAlchemy connection string used to connect to the slave database
+slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+max_pool_size = 100
+
+# Timeout in seconds before idle sql connections are reaped
+idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+max_overflow = 100
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+pool_timeout = 10
+
+[service_providers]
+# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall.
+# Must be in form:
+# service_provider=<service_type>:<name>:<driver>[:default]
+# List of allowed service types includes LOADBALANCER, FIREWALL, VPN
+# Combination of <service type> and <name> must be unique; <driver> must also be unique
+# This is multiline option, example for default provider:
+# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default
+# example of non-default provider:
+# service_provider=FIREWALL:name2:firewall_driver_path
+# --- Reference implementations ---
+service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default
+service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default
+# In order to activate Radware's lbaas driver you need to uncomment the next line.
+# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below.
+# Otherwise comment the HA Proxy line
+# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default
+# uncomment the following line to make the 'netscaler' LBaaS provider available.
+# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver
+# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver.
+# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default
+# Uncomment the line below to use Embrane heleos as Load Balancer service provider.
+# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default
diff --git a/deploy/adapters/ansible/openstack/templates/neutron.conf b/deploy/adapters/ansible/openstack/templates/neutron.conf
new file mode 100644
index 00000000..8a5e76ee
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/templates/neutron.conf
@@ -0,0 +1,466 @@
+[DEFAULT]
+# Print more verbose output (set logging level to INFO instead of default WARNING level).
+verbose = {{ VERBOSE }}
+
+# Print debugging output (set logging level to DEBUG instead of default WARNING level).
+debug = {{ VERBOSE }}
+
+# Where to store Neutron state files.  This directory must be writable by the
+# user executing the agent.
+state_path = /var/lib/neutron
+
+# Where to store lock files
+lock_path = $state_path/lock
+
+# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s
+# log_date_format = %Y-%m-%d %H:%M:%S
+
+# use_syslog                           -> syslog
+# log_file and log_dir                 -> log_dir/log_file
+# (not log_file) and log_dir           -> log_dir/{binary_name}.log
+# use_stderr                           -> stderr
+# (not user_stderr) and (not log_file) -> stdout
+# publish_errors                       -> notification system
+
+# use_syslog = False
+# syslog_log_facility = LOG_USER
+
+# use_stderr = True
+# log_file =
+log_dir = /var/log/neutron
+
+# publish_errors = False
+
+# Address to bind the API server to
+bind_host = {{ network_server_host }}
+
+# Port the bind the API server to
+bind_port = 9696
+
+# Path to the extensions.  Note that this can be a colon-separated list of
+# paths.  For example:
+# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions
+# The __path__ of neutron.extensions is appended to this, so if your
+# extensions are in there you don't need to specify them here
+# api_extensions_path =
+
+# (StrOpt) Neutron core plugin entrypoint to be loaded from the
+# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the
+# plugins included in the neutron source distribution. For compatibility with
+# previous versions, the class name of a plugin can be specified instead of its
+# entrypoint name.
+#
+#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+core_plugin = ml2
+# Example: core_plugin = ml2
+
+# (ListOpt) List of service plugin entrypoints to be loaded from the
+# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of
+# the plugins included in the neutron source distribution. For compatibility
+# with previous versions, the class name of a plugin can be specified instead
+# of its entrypoint name.
+#
+# service_plugins =
+# Example: service_plugins = router,firewall,lbaas,vpnaas,metering
+service_plugins = router
+
+# Paste configuration file
+api_paste_config = api-paste.ini
+
+# The strategy to be used for auth.
+# Supported values are 'keystone'(default), 'noauth'.
+auth_strategy = keystone
+
+# Base MAC address. The first 3 octets will remain unchanged. If the
+# 4h octet is not 00, it will also be used. The others will be
+# randomly generated.
+# 3 octet
+# base_mac = fa:16:3e:00:00:00
+# 4 octet
+# base_mac = fa:16:3e:4f:00:00
+
+# Maximum amount of retries to generate a unique MAC address
+# mac_generation_retries = 16
+
+# DHCP Lease duration (in seconds)
+dhcp_lease_duration = 86400
+
+# Allow sending resource operation notification to DHCP agent
+# dhcp_agent_notification = True
+
+# Enable or disable bulk create/update/delete operations
+# allow_bulk = True
+# Enable or disable pagination
+# allow_pagination = False
+# Enable or disable sorting
+# allow_sorting = False
+# Enable or disable overlapping IPs for subnets
+# Attention: the following parameter MUST be set to False if Neutron is
+# being used in conjunction with nova security groups
+allow_overlapping_ips = True
+# Ensure that configured gateway is on subnet
+# force_gateway_on_subnet = False
+
+
+# RPC configuration options. Defined in rpc __init__
+# The messaging module to use, defaults to kombu.
+# rpc_backend = neutron.openstack.common.rpc.impl_kombu
+rpc_backend = rabbit
+rabbit_host = {{ rabbit_host }}
+rabbit_password = {{ RABBIT_PASS }}
+
+# Size of RPC thread pool
+rpc_thread_pool_size = 240
+# Size of RPC connection pool
+rpc_conn_pool_size = 100
+# Seconds to wait for a response from call or multicall
+rpc_response_timeout = 300
+# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq.
+rpc_cast_timeout = 300
+# Modules of exceptions that are permitted to be recreated
+# upon receiving exception data from an rpc call.
+# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception
+# AMQP exchange to connect to if using RabbitMQ or QPID
+# control_exchange = neutron
+
+# If passed, use a fake RabbitMQ provider
+# fake_rabbit = False
+
+# Configuration options if sending notifications via kombu rpc (these are
+# the defaults)
+# SSL version to use (valid only if SSL enabled)
+# kombu_ssl_version =
+# SSL key file (valid only if SSL enabled)
+# kombu_ssl_keyfile =
+# SSL cert file (valid only if SSL enabled)
+# kombu_ssl_certfile =
+# SSL certification authority file (valid only if SSL enabled)
+# kombu_ssl_ca_certs =
+# Port where RabbitMQ server is running/listening
+rabbit_port = 5672
+# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port'
+# rabbit_hosts = localhost:5672
+# User ID used for RabbitMQ connections
+rabbit_userid = {{ RABBIT_USER }}
+# Location of a virtual RabbitMQ installation.
+# rabbit_virtual_host = /
+# Maximum retries with trying to connect to RabbitMQ
+# (the default of 0 implies an infinite retry count)
+# rabbit_max_retries = 0
+# RabbitMQ connection retry interval
+# rabbit_retry_interval = 1
+# Use HA queues in RabbitMQ (x-ha-policy: all). You need to
+# wipe RabbitMQ database when changing this option. (boolean value)
+# rabbit_ha_queues = false
+# QPID
+# rpc_backend=neutron.openstack.common.rpc.impl_qpid
+# Qpid broker hostname
+# qpid_hostname = localhost
+# Qpid broker port
+# qpid_port = 5672
+# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672)
+# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port'
+# qpid_hosts = localhost:5672
+# Username for qpid connection
+# qpid_username = ''
+# Password for qpid connection
+# qpid_password = ''
+# Space separated list of SASL mechanisms to use for auth
+# qpid_sasl_mechanisms = ''
+# Seconds between connection keepalive heartbeats
+# qpid_heartbeat = 60
+# Transport to use, either 'tcp' or 'ssl'
+# qpid_protocol = tcp
+# Disable Nagle algorithm
+# qpid_tcp_nodelay = True
+
+# ZMQ
+# rpc_backend=neutron.openstack.common.rpc.impl_zmq
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address.
+# rpc_zmq_bind_address = *
+
+# ============ Notification System Options =====================
+
+# Notifications can be sent when network/subnet/port are created, updated or deleted.
+# There are three methods of sending notifications: logging (via the
+# log_file directive), rpc (via a message queue) and
+# noop (no notifications sent, the default)
+
+# Notification_driver can be defined multiple times
+# Do nothing driver
+# notification_driver = neutron.openstack.common.notifier.no_op_notifier
+# Logging driver
+# notification_driver = neutron.openstack.common.notifier.log_notifier
+# RPC driver.
+notification_driver = neutron.openstack.common.notifier.rpc_notifier
+
+# default_notification_level is used to form actual topic name(s) or to set logging level
+default_notification_level = INFO
+
+# default_publisher_id is a part of the notification payload
+# host = myhost.com
+# default_publisher_id = $host
+
+# Defined in rpc_notifier, can be comma separated values.
+# The actual topic names will be %s.%(default_notification_level)s
+notification_topics = notifications
+
+# Default maximum number of items returned in a single response,
+# value == infinite and value < 0 means no max limit, and value must
+# be greater than 0. If the number of items requested is greater than
+# pagination_max_limit, server will just return pagination_max_limit
+# of number of items.
+# pagination_max_limit = -1
+
+# Maximum number of DNS nameservers per subnet
+# max_dns_nameservers = 5
+
+# Maximum number of host routes per subnet
+# max_subnet_host_routes = 20
+
+# Maximum number of fixed ips per port
+# max_fixed_ips_per_port = 5
+
+# =========== items for agent management extension =============
+# Seconds to regard the agent as down; should be at least twice
+# report_interval, to be sure the agent is down for good
+agent_down_time = 75
+# ===========  end of items for agent management extension =====
+
+# =========== items for agent scheduler extension =============
+# Driver to use for scheduling network to DHCP agent
+network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling router to a default L3 agent
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
+# Driver to use for scheduling a loadbalancer pool to an lbaas agent
+# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler
+
+# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted
+# networks to first DHCP agent which sends get_active_networks message to
+# neutron server
+# network_auto_schedule = True
+
+# Allow auto scheduling routers to L3 agent. It will schedule non-hosted
+# routers to first L3 agent which sends sync_routers message to neutron server
+# router_auto_schedule = True
+
+# Number of DHCP agents scheduled to host a network. This enables redundant
+# DHCP agents for configured networks.
+# dhcp_agents_per_network = 1
+
+# ===========  end of items for agent scheduler extension =====
+
+# =========== WSGI parameters related to the API server ==============
+# Number of separate worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as workers.  The parent process manages them.
+api_workers = 8
+
+# Number of separate RPC worker processes to spawn.  The default, 0, runs the
+# worker thread in the current process.  Greater than 0 launches that number of
+# child processes as RPC workers.  The parent process manages them.
+# This feature is experimental until issues are addressed and testing has been
+# enabled for various plugins for compatibility.
+rpc_workers = 8
+
+# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when
+# starting API server. Not supported on OS X.
+# tcp_keepidle = 600
+
+# Number of seconds to keep retrying to listen
+# retry_until_window = 30
+
+# Number of backlog requests to configure the socket with.
+# backlog = 4096
+
+# Max header line to accommodate large tokens
+# max_header_line = 16384
+
+# Enable SSL on the API server
+# use_ssl = False
+
+# Certificate file to use when starting API server securely
+# ssl_cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+# ssl_key_file = /path/to/keyfile
+
+# CA certificate file to use when starting API server securely to
+# verify connecting clients. This is an optional parameter only required if
+# API clients need to authenticate to the API server using SSL certificates
+# signed by a trusted CA
+# ssl_ca_file = /path/to/cafile
+# ======== end of WSGI parameters related to the API server ==========
+
+
+# ======== neutron nova interactions ==========
+# Send notification to nova when port status is active.
+notify_nova_on_port_status_changes = True
+
+# Send notifications to nova when port data (fixed_ips/floatingips) change
+# so nova can update it's cache.
+notify_nova_on_port_data_changes = True
+
+# URL for connection to nova (Only supports one nova region currently).
+nova_url = http://{{ internal_vip.ip }}:8774/v2
+
+# Name of nova region to use. Useful if keystone manages more than one region
+nova_region_name = regionOne
+
+# Username for connection to nova in admin context
+nova_admin_username = nova
+
+# The uuid of the admin nova tenant
+nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }}
+
+# Password for connection to nova in admin context.
+nova_admin_password = {{ NOVA_PASS }}
+
+# Authorization URL for connection to nova in admin context.
+nova_admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0
+
+# Number of seconds between sending events to nova if there are any events to send
+send_events_interval = 2
+
+# ======== end of neutron nova interactions ==========
+
+[quotas]
+# Default driver to use for quota checks
+quota_driver = neutron.db.quota_db.DbQuotaDriver
+
+# Resource name(s) that are supported in quota features
+quota_items = network,subnet,port
+
+# Default number of resource allowed per tenant. A negative value means
+# unlimited.
+default_quota = -1
+
+# Number of networks allowed per tenant. A negative value means unlimited.
+quota_network = 100
+
+# Number of subnets allowed per tenant. A negative value means unlimited.
+quota_subnet = 100
+
+# Number of ports allowed per tenant. A negative value means unlimited.
+quota_port = 8000
+
+# Number of security groups allowed per tenant. A negative value means
+# unlimited.
+quota_security_group = 1000
+
+# Number of security group rules allowed per tenant. A negative value means
+# unlimited.
+quota_security_group_rule = 1000
+
+# Number of vips allowed per tenant. A negative value means unlimited.
+# quota_vip = 10
+
+# Number of pools allowed per tenant. A negative value means unlimited.
+# quota_pool = 10
+
+# Number of pool members allowed per tenant. A negative value means unlimited.
+# The default is unlimited because a member is not a real resource consumer
+# on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_member = -1
+
+# Number of health monitors allowed per tenant. A negative value means
+# unlimited.
+# The default is unlimited because a health monitor is not a real resource
+# consumer on Openstack. However, on back-end, a member is a resource consumer
+# and that is the reason why quota is possible.
+# quota_health_monitors = -1
+
+# Number of routers allowed per tenant. A negative value means unlimited.
+# quota_router = 10
+
+# Number of floating IPs allowed per tenant. A negative value means unlimited.
+# quota_floatingip = 50
+
+[agent]
+# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real
+# root filter facility.
+# Change to "sudo" to skip the filtering and just run the comand directly
+root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
+
+# =========== items for agent management extension =============
+# seconds between nodes reporting state to server; should be less than
+# agent_down_time, best if it is half or less than agent_down_time
+report_interval = 30
+
+# ===========  end of items for agent management extension =====
+
+[keystone_authtoken]
+auth_uri = http://{{ internal_vip.ip }}:5000/v2.0
+identity_uri = http://{{ internal_vip.ip }}:35357
+admin_tenant_name = service
+admin_user = neutron
+admin_password = {{ NEUTRON_PASS }}
+signing_dir = $state_path/keystone-signing
+
+[database]
+# This line MUST be changed to actually run the plugin.
+# Example:
+# connection = mysql://root:pass@127.0.0.1:3306/neutron
+# Replace 127.0.0.1 above with the IP address of the database used by the
+# main neutron server. (Leave it as is if the database runs on this host.)
+# connection = sqlite:////var/lib/neutron/neutron.sqlite
+connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron
+
+# The SQLAlchemy connection string used to connect to the slave database
+slave_connection =
+
+# Database reconnection retry times - in event connectivity is lost
+# set to -1 implies an infinite retry count
+max_retries = 10
+
+# Database reconnection interval in seconds - if the initial connection to the
+# database fails
+retry_interval = 10
+
+# Minimum number of SQL connections to keep open in a pool
+min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+max_pool_size = 100
+
+# Timeout in seconds before idle sql connections are reaped
+idle_timeout = 3600
+
+# If set, use this value for max_overflow with sqlalchemy
+max_overflow = 100
+
+# Verbosity of SQL debugging information. 0=None, 100=Everything
+connection_debug = 0
+
+# Add python stack traces to SQL as comment strings
+connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+pool_timeout = 10
+
+[service_providers]
+# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall.
+# Must be in form:
+# service_provider=<service_type>:<name>:<driver>[:default]
+# List of allowed service types includes LOADBALANCER, FIREWALL, VPN
+# Combination of <service type> and <name> must be unique; <driver> must also be unique
+# This is multiline option, example for default provider:
+# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default
+# example of non-default provider:
+# service_provider=FIREWALL:name2:firewall_driver_path
+# --- Reference implementations ---
+service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default
+service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default
+# In order to activate Radware's lbaas driver you need to uncomment the next line.
+# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below.
+# Otherwise comment the HA Proxy line
+# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default
+# uncomment the following line to make the 'netscaler' LBaaS provider available.
+# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver
+# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver.
+# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default
+# Uncomment the line below to use Embrane heleos as Load Balancer service provider.
+# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default
diff --git a/deploy/adapters/ansible/openstack/templates/nova.conf b/deploy/adapters/ansible/openstack/templates/nova.conf
new file mode 100644
index 00000000..559a6d82
--- /dev/null
+++ b/deploy/adapters/ansible/openstack/templates/nova.conf
@@ -0,0 +1,74 @@
+[DEFAULT]
+dhcpbridge_flagfile=/etc/nova/nova.conf
+dhcpbridge=/usr/bin/nova-dhcpbridge
+logdir=/var/log/nova
+state_path=/var/lib/nova
+lock_path=/var/lib/nova/tmp
+force_dhcp_release=True
+iscsi_helper=tgtadm
+libvirt_use_virtio_for_bridges=True
+connection_type=libvirt
+root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf
+verbose={{ VERBOSE}}
+debug={{ DEBUG }}
+ec2_private_dns_show_ip=True
+api_paste_config=/etc/nova/api-paste.ini
+volumes_path=/var/lib/nova/volumes
+enabled_apis=osapi_compute,metadata
+
+vif_plugging_is_fatal: false
+vif_plugging_timeout: 0
+
+auth_strategy = keystone
+
+rpc_backend = rabbit
+rabbit_host = {{ rabbit_host }}
+rabbit_userid = {{ RABBIT_USER }}
+rabbit_password = {{ RABBIT_PASS }}
+
+osapi_compute_listen={{ internal_ip }}
+metadata_listen={{ internal_ip }}
+
+my_ip = {{ internal_ip }}
+vnc_enabled = True
+vncserver_listen = {{ internal_ip }}
+vncserver_proxyclient_address = {{ internal_ip }}
+novncproxy_base_url = http://{{ internal_vip.ip }}:6080/vnc_auto.html
+
+novncproxy_host = {{ internal_ip }}
+novncproxy_port = 6080
+
+network_api_class = nova.network.neutronv2.api.API
+linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver
+firewall_driver = nova.virt.firewall.NoopFirewallDriver
+security_group_api = neutron
+
+instance_usage_audit = True
+instance_usage_audit_period = hour
+notify_on_state_change = vm_and_task_state
+notification_driver = nova.openstack.common.notifier.rpc_notifier
+notification_driver = ceilometer.compute.nova_notifier
+
+[database]
+# The SQLAlchemy connection string used to connect to the database
+connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova
+
+[keystone_authtoken]
+auth_uri = http://{{ internal_vip.ip }}:5000/2.0
+identity_uri = http://{{ internal_vip.ip }}:35357
+admin_tenant_name = service
+admin_user = nova
+admin_password = {{ NOVA_PASS }}
+
+[glance]
+host = {{ internal_vip.ip }}
+
+[neutron]
+url = http://{{ internal_vip.ip }}:9696
+auth_strategy = keystone
+admin_tenant_name = service
+admin_username = neutron
+admin_password = {{ NEUTRON_PASS }}
+admin_auth_url = http://{{ internal_vip.ip }}:35357/v2.0
+service_metadata_proxy = True
+metadata_proxy_shared_secret = {{ METADATA_SECRET }}