Adjusted the FAQ structure

JIRA: DOCS-165

Change-Id: I1b9740f644d109277006a7991f5e9b56edc33e2e
Signed-off-by: liyuenan <liyuenan@huawei.com>

6 files changed, 30 insertions, 64 deletions

diff --git a/docs/FAQ/faq.rst b/docs/FAQ/faq.rst
index feae4142..177ff0bb 100644
--- a/docs/FAQ/faq.rst
+++ b/docs/FAQ/faq.rst
@@ -21,7 +21,9 @@ What's the additional setting in switch if use the default network configuration
 ================================================================================
 
 Here is the Compass4nfv default network configration file:
-compass4nfv/deploy/conf/network_cfg.yaml
+compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml
+OR
+compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml
 
 It uses a VLAN network for mgmt and storage networks that are share one NIC(eth1) as a
 default network configuration. So you need add an additional tagged VLAN (101) and VLAN (102) on
@@ -58,25 +60,26 @@ How to visit OpenStack Dashboard
 
 You can visit OpenStack Dashboard by URL: http://{puclib_vip}/horizon
 
-The public virtual IP is configured in "compass4nfv/deploy/conf/network_cfg.yaml", defined as below:
+The public virtual IP is configured in "compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml"
+or "compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml", defined as below:
 
 .. code-block:: yaml
 
     public_vip:
       ip: 192.168.50.240
 
-How to access BM nodes after deployment
-=======================================
+How to access controller nodes after deployment
+===============================================
 
-1.     First you should login Compass VM via ssh command on Jumphost by default user/pass root/root.
+1. First you should login Compass VM via ssh command on Jumphost by default user/pass root/root.
 The default login IP of Compass VM is configured in "compass4nfv/deploy/conf/base.conf", defined as below:
 
 .. code-block:: bash
 
     export MGMT_IP=${MGMT_IP:-192.168.200.2}
 
-2.     Then you can login the BM nodes (host1-3) by default user/pass root/root via the install network IPs
-which are configured in "compass4nfv/deploy/conf/base.conf", defined as below:
+2. Then you can login the controller nodes (host1-3) by default user/pass root/root via the install
+network IPs which are configured in "compass4nfv/deploy/conf/base.conf", defined as below:
 
 .. code-block:: bash
 
@@ -108,8 +111,8 @@ which are configured in "compass4nfv/deploy/conf/base.conf", defined as below:
 Where is OpenStack RC file
 ==========================
 
-It is located /opt/admin-openrc.sh in each BM node as default. Please source it first if you want to use
-OpenStack CLI.
+It is located /opt/admin-openrc.sh in each controller node as default. Please source it first if you
+want to use OpenStack CLI.
 
 How to recovery network connection after Jumphost reboot
 ========================================================
diff --git a/docs/FAQ/how-to-build-customized-iso.rst b/docs/FAQ/how-to-build-customized-iso.rst
index 37b5c72b..c0bf4083 100644
--- a/docs/FAQ/how-to-build-customized-iso.rst
+++ b/docs/FAQ/how-to-build-customized-iso.rst
@@ -5,24 +5,20 @@ How to build a customized ISO
 
 If you want to use Compass4nfv official ISO to deploy the environment, you can jump over this section.
 
-
 This section indicates how to add additional packages and how to build a new compass4nfv ISO file
 so that Compass4nfv would install the additional packages automatically during the deployment.
 
-
-* Approach 1 ----- apt/yum installation:
-
+Approach 1 ----- apt/yum installation
+-------------------------------------
 
 1. Confirm the targeted packages could be installed via apt-get(Ubuntu) and yum(Centos),
 you can verify on your own environment first by commands
 "apt-get install {targeted packages}" on Ubuntu and "yum install {targeted packages}" on Centos.
 
-
 2. Create a new role folder ({newrole}) in the compass4nfv/deploy/adapters/ansible/roles/,
 create a new folder named "vars" in the new role folder({newrole}),
 and create a file named "main.yml" and add "---" at the head of this file.
 
-
 3. If the targeted packages names are same in both Ubuntu and Centos, you just need edit main.yml.
 
 Add the packages' names as following:
@@ -35,7 +31,6 @@ Add the packages' names as following:
        - {targeted packages3}
        ...
 
-
 4. If the targeted packages' names are different in Ubuntu and Centos,
 you need create "Debian.yml" and/or "RedHat.yml" in the same folder as "main.yml" and add "---" at the head of the files.
 
@@ -50,10 +45,8 @@ Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" :
         - {targeted Ubuntu/RedHat packages3}
         ...
 
-
 Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example.
 
-
 5.1 Add the new role to ansible so that Compass4nfv will install the packages during the deployment :
 "enter compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml and/or single-controller.yml,
 add {newrole} at an appropriate position, please be aware of that compass4nfv deploys the roles
@@ -70,7 +63,6 @@ The first line "hosts" of the section means compass4nfv will deploy {newrole} on
 
 Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml.
 
-
 Attention
     "HA-ansible-multinodes.yml" deploys controllers backup targeted environment
 and 3 controllers in backup mode + 2 compute by default;.
@@ -101,10 +93,8 @@ Also please pay attention to the position inserted as Compass4nfv deploys the pa
 
 Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml.
 
-
 6. Run compass4nfv/build/make_repo.sh.
 
-
 7. After 6 finishs, please check "compass4nfv/work/repo/" folder,
 if files as following exist in the folder, that means building packages successfully.
 
@@ -130,16 +120,12 @@ CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path f
 9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso
 in the "compass4nfv/work/building" folder, that means building iso successfully.
 
-
-
-
-* Approach 2 ---- source installation
-
+Approach 2 ---- source installation
+-----------------------------------
 
 This section indicates to install packages from source codes. If the targeted packages could not be
 installed from apt-get and yum but from source codes, please refer this section.
 
-
 1. Enter folder "compass4nfv/build/arch/Debian" or "compass4nfv/build/arch/RedHat" that depend on
 operating system you want to install package, create a bash(.sh) file
 which includes all the commands which install the packages from source codes.
@@ -169,13 +155,11 @@ which includes all the commands which install the packages from source codes.
 Please pay attention to the last second sentence, all the compiled packages need to be
 copied to the "/var/cache/apt/archives/"(Ubuntu) folder, and for Centos, the folder is ... to be continued .
 
-
 2. Add a new role so that Compass4nfv will install the packages during the deployment,
 create a new role folder ({newrole}) in the "compass4nfv/deploy/adapters/ansible/roles/",
 create a new folder named "vars" in the new role folder({newrole}),
 and create a file named "main.yml" and add "---" at the head of this file.
 
-
 3. If the packages' names are same in both Ubuntu and Centos, you just need edit main.yml.
 
 Add the packages' names as following:
@@ -203,10 +187,8 @@ Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" :
         - {targeted Ubuntu/RedHat packages3}
         ...
 
-
 Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example.
 
-
 5.1 Enter "compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml
 and/or single-controller.yml, add {newrole} at an appropriate position, please be aware of that compass4nfv
 deploys the roles in the order as list in HA-ansible-multinodes.yml/single-controller.yml,
@@ -223,13 +205,11 @@ The first line "hosts" of the section means compass4nfv will deploy {newrole} on
 
 Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml.
 
-
 Attention
     "HA-ansible-multinodes.yml" deploys controllers backup targeted environment and
 3 controllers in backup mode + 2 compute by default.
     "single-controller.yml" deploys 1 controller + 4 compute.
 
-
 5.2 Or insert the new role into the existing section at an appropriate position
 in HA-ansible-multinodes.yml and single-controller.yml.
 
@@ -254,12 +234,8 @@ Also please pay attention to the position inserted as Compass4nfv deploys the pa
 
 Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml.
 
-
-
 6. Run compass4nfv/build/make_repo.sh .
 
-
-
 7. After 6 finishs, please check "compass4nfv/work/repo/" folder,
 if files as following exist in the folder, that means building packages successfully.
 
@@ -269,8 +245,6 @@ trusty-juno-ppa.tar.gz is OpenStack Juno version for Ubuntu14.04.
 
 trusty-kilo-ppa.tar.gz is OpenStack Kilo version for Ubuntu14.04.
 
-
-
 8. Edit compass4nfv/build/build.conf, find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items,
 modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item).
 
@@ -282,13 +256,5 @@ CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path f
 
     TRUSTY_JUNO_PPA=/compass4nfv/work/repo/trusty-juno-ppa.tar.gz
 
-
-
 9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso
 in the "compass4nfv/work/building" folder, that means building ISO successfully.
-
-
-
-* Approach 3 ---- autonomous packages installation
-
-package installed, to be continued...
diff --git a/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst b/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst
index f12d38d0..986bd79a 100644
--- a/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst
+++ b/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst
@@ -3,8 +3,11 @@
 How to deploy while Jumphost cannot access internet
 ===================================================
 
-If your Jumphost cannot access internet, don't worry, you can definitely deploy compass without internet access.
+If your Jumphost cannot access internet, don't worry, you can definitely deploy compass without
+internet access.
 
-You can download compass.iso first from OPNFV artifacts repository (http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl. Then copy the compass.iso and the compass4nfv repository to your Jumphost and editor the ISO_URL to your local path.
+You can download compass.iso first from OPNFV artifacts repository (http://artifacts.opnfv.org/,
+search compass4nfv and select an appropriate ISO file) via wget or curl. Then copy the compass.iso
+and the compass4nfv repository to your Jumphost and editor the ISO_URL to your local path.
 
 After that you can deploy compass without internet access.
diff --git a/docs/FAQ/how-to-deploy-without-internet-access.rst b/docs/FAQ/how-to-deploy-without-internet-access.rst
index 6bfcb3de..e91f110b 100644
--- a/docs/FAQ/how-to-deploy-without-internet-access.rst
+++ b/docs/FAQ/how-to-deploy-without-internet-access.rst
@@ -6,13 +6,12 @@ How to deploy without internet access
 If you have created your own ISO file(compass.iso), you realy could deploy without internet access,
 edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path
 (export ISO_URL=file:///compass4nfv/work/building/compass.iso).
-Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access.
-
+Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without
+internet access.
 
 Also you can download compass.iso first from OPNFV artifacts repository
 (http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl.
-After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path.
-Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access.
-
-
+After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file
+path.Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without
+internet access.
 
diff --git a/docs/FAQ/how-to-integrate-plugins.rst b/docs/FAQ/how-to-integrate-plugins.rst
deleted file mode 100644
index 8e810d7d..00000000
--- a/docs/FAQ/how-to-integrate-plugins.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-.. two dots create a comment. please leave this logo at the top of each of your rst files.
-
-How to integrate plugins
-========================
-
-tbd
-
diff --git a/docs/FAQ/index.rst b/docs/FAQ/index.rst
index 7b349d0e..36408d0d 100644
--- a/docs/FAQ/index.rst
+++ b/docs/FAQ/index.rst
@@ -5,10 +5,12 @@
 OPNFV(Colorado) Compass4nfv Frequently Asked Questions
 =========================================================
 
-Contents:
-
 .. toctree::
    :numbered:
    :maxdepth: 4
 
+   how-to-build-customized-iso.rst
+   how-to-deploy-while-jumphost-cannot-access-internet.rst
+   how-to-deploy-without-internet-access.rst
+   how-to-integrate-plugins.rst
    faq.rst