summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorQingyu Wang <qingyuwang33@gmail.com>2016-11-21 15:52:31 -0800
committerMaxwell Li <liyuenan@huawei.com>2017-02-22 01:53:56 +0000
commit45ebd77015ceef9420fbd0985eb5fe85dd96e107 (patch)
treeccd330f809f1859045774ddc6c57a139c7428e09
parent849d0b1ae242f5b10163b45e285d4ee661519752 (diff)
Installation and release documentations update
JIRA: DOCS-165 update document for Danube release according to new doc guide; https://wiki.opnfv.org/display/DOC/Documentation+Guide add network topology for virtual and bm deployment; add a section for network_cfg.yaml configuration; add feature section, listing supported openstack version and features update installation for deployment and expansion. Change-Id: If43d94554bebc78bbd56cdf889c8c34dda926218 Signed-off-by: Qingyu <qingyuwang33@gmail.com> Signed-off-by: Justin <chigang@huawei.com>
-rw-r--r--.gitignore2
-rw-r--r--docs/FAQ/how-to-build-customized-iso.rst260
-rw-r--r--docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst13
-rw-r--r--docs/FAQ/how-to-deploy-without-internet-access.rst17
-rw-r--r--docs/installationprocedure/bmdeploy.rst340
-rw-r--r--docs/installationprocedure/expansion.rst339
-rw-r--r--docs/release/FAQ/faq.rst (renamed from docs/FAQ/faq.rst)0
-rw-r--r--docs/release/FAQ/index.rst (renamed from docs/FAQ/index.rst)6
-rw-r--r--docs/release/installation/bmdeploy.rst558
-rw-r--r--docs/release/installation/configure-network.rst107
-rw-r--r--docs/release/installation/expansion.rst157
-rw-r--r--docs/release/installation/featureTable.rst51
-rw-r--r--docs/release/installation/index.rst (renamed from docs/installationprocedure/index.rst)10
-rw-r--r--docs/release/installation/installation.rst (renamed from docs/installationprocedure/installation.instruction.rst)23
-rw-r--r--docs/release/installation/introduction.rst (renamed from docs/installationprocedure/introduction.rst)5
-rw-r--r--docs/release/installation/offline-deploy.rst (renamed from docs/installationprocedure/offline-deploy.rst)0
-rw-r--r--docs/release/installation/postinstall.rst (renamed from docs/installationprocedure/postinstall.rst)0
-rw-r--r--docs/release/installation/preconditions.rst163
-rw-r--r--docs/release/installation/references.rst (renamed from docs/installationprocedure/references.rst)10
-rw-r--r--docs/release/installation/vmdeploy.rst (renamed from docs/installationprocedure/vmdeploy.rst)113
-rw-r--r--docs/release/release-notes/index.rst (renamed from docs/releasenotes/index.rst)6
-rw-r--r--docs/release/release-notes/release-notes.rst (renamed from docs/releasenotes/release-notes.rst)47
22 files changed, 1127 insertions, 1100 deletions
diff --git a/.gitignore b/.gitignore
index 28617768..b94400cb 100644
--- a/.gitignore
+++ b/.gitignore
@@ -11,6 +11,8 @@
/docs_output/
/releng/
/work
+/docs/output/
+/docs/source/
# Packages #
############
diff --git a/docs/FAQ/how-to-build-customized-iso.rst b/docs/FAQ/how-to-build-customized-iso.rst
deleted file mode 100644
index c0bf4083..00000000
--- a/docs/FAQ/how-to-build-customized-iso.rst
+++ /dev/null
@@ -1,260 +0,0 @@
-.. two dots create a comment. please leave this logo at the top of each of your rst files.
-
-How to build a customized ISO
-=============================
-
-If you want to use Compass4nfv official ISO to deploy the environment, you can jump over this section.
-
-This section indicates how to add additional packages and how to build a new compass4nfv ISO file
-so that Compass4nfv would install the additional packages automatically during the deployment.
-
-Approach 1 ----- apt/yum installation
--------------------------------------
-
-1. Confirm the targeted packages could be installed via apt-get(Ubuntu) and yum(Centos),
-you can verify on your own environment first by commands
-"apt-get install {targeted packages}" on Ubuntu and "yum install {targeted packages}" on Centos.
-
-2. Create a new role folder ({newrole}) in the compass4nfv/deploy/adapters/ansible/roles/,
-create a new folder named "vars" in the new role folder({newrole}),
-and create a file named "main.yml" and add "---" at the head of this file.
-
-3. If the targeted packages names are same in both Ubuntu and Centos, you just need edit main.yml.
-
-Add the packages' names as following:
-
-.. code-block:: bash
-
- packages_noarch:
- - {targeted packages1}
- - {targeted packages2}
- - {targeted packages3}
- ...
-
-4. If the targeted packages' names are different in Ubuntu and Centos,
-you need create "Debian.yml" and/or "RedHat.yml" in the same folder as "main.yml" and add "---" at the head of the files.
-
-Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" :
-
-.. code-block:: bash
-
- ---
- packages:
- - {targeted Ubuntu/RedHat packages1}
- - {targeted Ubuntu/RedHat packages2}
- - {targeted Ubuntu/RedHat packages3}
- ...
-
-Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example.
-
-5.1 Add the new role to ansible so that Compass4nfv will install the packages during the deployment :
-"enter compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml and/or single-controller.yml,
-add {newrole} at an appropriate position, please be aware of that compass4nfv deploys the roles
-in the order as list in HA-ansible-multinodes.yml/single-controller.yml, you can add a new section as the following::
-
- - hosts: all/controller/compute/ha
- remote_user: root
- sudo: True
- roles:
- - {newrole}
-
-The first line "hosts" of the section means compass4nfv will deploy {newrole} on which baremetals/VMs,
-"all" means it deploys on all baremetals/VMs, "controller" means it deploys on all controller and so on.
-
-Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml.
-
-Attention
- "HA-ansible-multinodes.yml" deploys controllers backup targeted environment
-and 3 controllers in backup mode + 2 compute by default;.
- "single-controller.yml" deploys 1 controller + 4 compute.
-
-
-5.2 Or insert the new role into the existing section at an appropriate position in
-HA-ansible-multinodes.yml and single-controller.yml.
-
- Example:
-
-.. code-block:: bash
-
- - hosts: controller/all/compute/ha
- remote_user: root
- sudo: True
- roles:
- - database
- - mq
- - keystone
- - nova-controller
- - neutron-controller
- - {newrole}
-
-Please pay attention to the first line "hosts" by which Compass4nfv deploys {newrole} on which baremetals/VMs.
-
-Also please pay attention to the position inserted as Compass4nfv deploys the packages in the order as list.
-
-Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml.
-
-6. Run compass4nfv/build/make_repo.sh.
-
-7. After 6 finishs, please check "compass4nfv/work/repo/" folder,
-if files as following exist in the folder, that means building packages successfully.
-
-centos7-juno-ppa.tar.gz is OpenStack Juno version for Centos7.
-
-trusty-juno-ppa.tar.gz is OpenStack Juno version for Ubuntu14.04.
-
-trusty-kilo-ppa.tar.gz is OpenStack Kilo version for Ubuntu14.04.
-
-
-8. Edit compass4nfv/build/build.conf, find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items,
-modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item).
-
-CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path for Ubuntu
-
-.. code-block:: bash
-
- CENTOS7_JUNO_PPA=/compass4nfv/work/repo/centos7-juno-ppa.tar.gz
-
- TRUSTY_JUNO_PPA=/compass4nfv/work/repo/trusty-juno-ppa.tar.gz
-
-
-9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso
-in the "compass4nfv/work/building" folder, that means building iso successfully.
-
-Approach 2 ---- source installation
------------------------------------
-
-This section indicates to install packages from source codes. If the targeted packages could not be
-installed from apt-get and yum but from source codes, please refer this section.
-
-1. Enter folder "compass4nfv/build/arch/Debian" or "compass4nfv/build/arch/RedHat" that depend on
-operating system you want to install package, create a bash(.sh) file
-which includes all the commands which install the packages from source codes.
-
- Example:
-
-.. code-block:: bash
-
- #!/bin/bash
- apt-get update
- apt-get install -y build-essential fakeroot debhelper \
- autoconf automake bzip2 libssl-dev \
- openssl graphviz python-all procps \
- python-qt4 python-zopeinterface \
- python-twisted-conch libtool wget
-
- pushd .
- cd /tmp
- wget http://openvswitch.org/releases/openvswitch-2.3.1.tar.gz
- tar -zxvf openvswitch-2.3.1.tar.gz
- cd openvswitch-2.3.1
- DEB_BUILD_OPTIONS='parallel=8 nocheck' fakeroot debian/rules binary
- cd -
- cp -f *.deb /var/cache/apt/archives/
- popd
-
-Please pay attention to the last second sentence, all the compiled packages need to be
-copied to the "/var/cache/apt/archives/"(Ubuntu) folder, and for Centos, the folder is ... to be continued .
-
-2. Add a new role so that Compass4nfv will install the packages during the deployment,
-create a new role folder ({newrole}) in the "compass4nfv/deploy/adapters/ansible/roles/",
-create a new folder named "vars" in the new role folder({newrole}),
-and create a file named "main.yml" and add "---" at the head of this file.
-
-3. If the packages' names are same in both Ubuntu and Centos, you just need edit main.yml.
-
-Add the packages' names as following:
-
-.. code-block:: bash
-
- packages_noarch:
- - {targeted packages1}
- - {targeted packages2}
- - {targeted packages3}
- ...
-
-
-4. If the targeted packages' names are different in Ubuntu and Centos,
-you need create "Debian.yml" and/or "RedHat.yml" in the same folder as "main.yml"
-and add "---" at the head of the files.
-
-Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" :
-
-.. code-block:: bash
-
- packages:
- - {targeted Ubuntu/RedHat packages1}
- - {targeted Ubuntu/RedHat packages2}
- - {targeted Ubuntu/RedHat packages3}
- ...
-
-Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example.
-
-5.1 Enter "compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml
-and/or single-controller.yml, add {newrole} at an appropriate position, please be aware of that compass4nfv
-deploys the roles in the order as list in HA-ansible-multinodes.yml/single-controller.yml,
-you can add a new section as the following::
-
- - hosts: all/controller/compute/ha
- remote_user: root
- sudo: True
- roles:
- - {newrole}
-
-The first line "hosts" of the section means compass4nfv will deploy {newrole} on which baremetals/VMs,
-"all" means it deploys on all baremetals/VMs, "controller" means it deploys on all controller and so on.
-
-Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml.
-
-Attention
- "HA-ansible-multinodes.yml" deploys controllers backup targeted environment and
-3 controllers in backup mode + 2 compute by default.
- "single-controller.yml" deploys 1 controller + 4 compute.
-
-5.2 Or insert the new role into the existing section at an appropriate position
-in HA-ansible-multinodes.yml and single-controller.yml.
-
- Example:
-
-.. code-block:: bash
-
- - hosts: controller
- remote_user: root
- sudo: True
- roles:
- - database
- - mq
- - keystone
- - nova-controller
- - neutron-controller
- - {newrole}
-
-Please pay attention to the first line "hosts" by which Compass4nfv deploys {newrole} on which baremetals/VMs.
-
-Also please pay attention to the position inserted as Compass4nfv deploys the packages in the order as list.
-
-Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml.
-
-6. Run compass4nfv/build/make_repo.sh .
-
-7. After 6 finishs, please check "compass4nfv/work/repo/" folder,
-if files as following exist in the folder, that means building packages successfully.
-
-centos7-juno-ppa.tar.gz is OpenStack Juno version for Centos7.
-
-trusty-juno-ppa.tar.gz is OpenStack Juno version for Ubuntu14.04.
-
-trusty-kilo-ppa.tar.gz is OpenStack Kilo version for Ubuntu14.04.
-
-8. Edit compass4nfv/build/build.conf, find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items,
-modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item).
-
-CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path for Ubuntu
-
-.. code-block:: bash
-
- CENTOS7_JUNO_PPA=/compass4nfv/work/repo/centos7-juno-ppa.tar.gz
-
- TRUSTY_JUNO_PPA=/compass4nfv/work/repo/trusty-juno-ppa.tar.gz
-
-9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso
-in the "compass4nfv/work/building" folder, that means building ISO successfully.
diff --git a/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst b/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst
deleted file mode 100644
index 986bd79a..00000000
--- a/docs/FAQ/how-to-deploy-while-jumphost-cannot-access-internet.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. two dots create a comment. please leave this logo at the top of each of your rst files.
-
-How to deploy while Jumphost cannot access internet
-===================================================
-
-If your Jumphost cannot access internet, don't worry, you can definitely deploy compass without
-internet access.
-
-You can download compass.iso first from OPNFV artifacts repository (http://artifacts.opnfv.org/,
-search compass4nfv and select an appropriate ISO file) via wget or curl. Then copy the compass.iso
-and the compass4nfv repository to your Jumphost and editor the ISO_URL to your local path.
-
-After that you can deploy compass without internet access.
diff --git a/docs/FAQ/how-to-deploy-without-internet-access.rst b/docs/FAQ/how-to-deploy-without-internet-access.rst
deleted file mode 100644
index e91f110b..00000000
--- a/docs/FAQ/how-to-deploy-without-internet-access.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-.. two dots create a comment. please leave this logo at the top of each of your rst files.
-
-How to deploy without internet access
-=====================================
-
-If you have created your own ISO file(compass.iso), you realy could deploy without internet access,
-edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path
-(export ISO_URL=file:///compass4nfv/work/building/compass.iso).
-Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without
-internet access.
-
-Also you can download compass.iso first from OPNFV artifacts repository
-(http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl.
-After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file
-path.Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without
-internet access.
-
diff --git a/docs/installationprocedure/bmdeploy.rst b/docs/installationprocedure/bmdeploy.rst
deleted file mode 100644
index 3b294f1f..00000000
--- a/docs/installationprocedure/bmdeploy.rst
+++ /dev/null
@@ -1,340 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Installation Guide (Bare Metal Deployment)
-==========================================
-
-Nodes Configuration (Bare Metal Deployment)
--------------------------------------------
-
-The below file is the inventory template of deployment nodes:
-
-"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml"
-
-The "dha.yml" is a collectively name for "os-nosdn-nofeature-ha.yml
-os-ocl-nofeature-ha.yml os-odl_l2-moon-ha.yml etc".
-
-You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
-
- - name -- Host name for deployment node after installation.
-
- - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
- or IPMI 2.0 is available.
-
- - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
- from Jumphost.
-
- - ipmiUser -- IPMI Username for deployment node.
-
- - ipmiPass -- IPMI Password for deployment node.
-
- - mac -- MAC Address of deployment node PXE NIC .
-
- - roles -- Components deployed.
-
-**Set TYPE/FLAVOR and POWER TOOL**
-
-E.g.
-.. code-block:: yaml
-
- TYPE: baremetal
- FLAVOR: cluster
- POWER_TOOL: ipmitool
-
-**Set ipmiUser/ipmiPass and ipmiVer**
-
-E.g.
-
-.. code-block:: yaml
-
- ipmiUser: USER
- ipmiPass: PASSWORD
- ipmiVer: '2.0'
-
-**Assignment of different roles to servers**
-
-E.g. Openstack only deployment roles setting
-
-.. code-block:: yaml
-
- hosts:
- - name: host1
- mac: 'F8:4A:BF:55:A2:8D'
- interfaces:
- - eth1: 'F8:4A:BF:55:A2:8E'
- ipmiIp: 172.16.130.26
- roles:
- - controller
- - ha
-
- - name: host2
- mac: 'D8:49:0B:DA:5A:B7'
- interfaces:
- - eth1: 'D8:49:0B:DA:5A:B8'
- ipmiIp: 172.16.130.27
- roles:
- - compute
-
-NOTE:
-IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
-
-E.g. Openstack and ceph deployment roles setting
-
-.. code-block:: yaml
-
- hosts:
- - name: host1
- mac: 'F8:4A:BF:55:A2:8D'
- interfaces:
- - eth1: 'F8:4A:BF:55:A2:8E'
- ipmiIp: 172.16.130.26
- roles:
- - controller
- - ha
- - ceph-adm
- - ceph-mon
-
- - name: host2
- mac: 'D8:49:0B:DA:5A:B7'
- interfaces:
- - eth1: 'D8:49:0B:DA:5A:B8'
- ipmiIp: 172.16.130.27
- roles:
- - compute
- - ceph-osd
-
-E.g. Openstack and ODL deployment roles setting
-
-.. code-block:: yaml
-
- hosts:
- - name: host1
- mac: 'F8:4A:BF:55:A2:8D'
- interfaces:
- - eth1: 'F8:4A:BF:55:A2:8E'
- ipmiIp: 172.16.130.26
- roles:
- - controller
- - ha
- - odl
-
- - name: host2
- mac: 'D8:49:0B:DA:5A:B7'
- interfaces:
- - eth1: 'D8:49:0B:DA:5A:B8'
- ipmiIp: 172.16.130.27
- roles:
- - compute
-
-E.g. Openstack and ONOS deployment roles setting
-
-.. code-block:: yaml
-
- hosts:
- - name: host1
- mac: 'F8:4A:BF:55:A2:8D'
- interfaces:
- - eth1: 'F8:4A:BF:55:A2:8E'
- ipmiIp: 172.16.130.26
- roles:
- - controller
- - ha
- - onos
-
- - name: host2
- mac: 'D8:49:0B:DA:5A:B7'
- interfaces:
- - eth1: 'D8:49:0B:DA:5A:B8'
- ipmiIp: 172.16.130.27
- roles:
- - compute
-
-Network Configuration (Bare Metal Deployment)
----------------------------------------------
-
-Before deployment, there are some network configuration to be checked based
-on your network topology.Compass4nfv network default configuration file is
-"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml".
-You can write your own reference to it.
-
-**The following figure shows the default network configuration.**
-
-.. code-block:: console
-
-
- +--+ +--+ +--+
- | | | | | |
- | | +------------+ | | | |
- | +------+ Jumphost +------+ | | |
- | | +------+-----+ | | | |
- | | | | | | |
- | | +------------+ +-----+ |
- | | | | | |
- | | +------------+ | | | |
- | +------+ host1 +------+ | | |
- | | +------+-----+ | | | |
- | | | | | | |
- | | +------------+ +-----+ |
- | | | | | |
- | | +------------+ | | | |
- | +------+ host2 +------+ | | |
- | | +------+-----+ | | | |
- | | | | | | |
- | | +------------+ +-----+ |
- | | | | | |
- | | +------------+ | | | |
- | +------+ host3 +------+ | | |
- | | +------+-----+ | | | |
- | | | | | | |
- | | +------------+ +-----+ |
- | | | | | |
- | | | | | |
- +-++ ++-+ +-++
- ^ ^ ^
- | | |
- | | |
- +-+-------------------------+ | |
- | External Network | | |
- +---------------------------+ | |
- +-----------------------+---+ |
- | IPMI Network | |
- +---------------------------+ |
- +-------------------------+-+
- | PXE(Installation) Network |
- +---------------------------+
-
-
-Start Deployment (Bare Metal Deployment)
-----------------------------------------
-
-1. Edit deploy.sh
-
-Set OS version and OpenStack version for deployment nodes.
- Compass4nfv Colorado supports three OS version based openstack mitaka.
-
-E.g.
-
-.. code-block:: bash
-
- ######################### The environment for Openstack ######################
- # Ubuntu16.04 Newton
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=newton_xenial
-
- # Ubuntu14.04 Mitaka
- #export OS_VERSION=trusty
- #export OPENSTACK_VERSION=mitaka
-
- # Ubuntu16.04 Mitaka
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=mitaka_xenial
-
- # Centos7 Mitaka
- #export OS_VERSION=centos7
- #export OPENSTACK_VERSION=mitaka
-
- # Redhat7 OSP9
- #export OS_VERSION=redhat7
- #export OPENSTACK_VERSION=osp9
-
-Set ISO image that you want to deploy
-
-E.g.
-
-.. code-block:: bash
-
- # ISO_URL is your iso's absolute path
- export ISO_URL=file:///home/compass/compass4nfv.iso
- # or
- # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
-
-Set Jumphost PXE NIC. (set eth1 E.g.)
-
-E.g.
-
-.. code-block:: bash
-
- ########## Hardware Deploy Jumphost PXE NIC ##########
- # you need comment out it when virtual deploy
- export INSTALL_NIC=eth1
-
-Set scenario that you want to deploy
-
-E.g.
-
-nosdn-nofeature scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-ocl-nofeature scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
-
-odl_l2-moon scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-odl_l2-nofeature scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-odl_l3-nofeature scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-onos-nofeature scenario deploy sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
-
-onos-sfc deploy scenario sample
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
-
-2. Run ``deploy.sh``
-
-.. code-block:: bash
-
- ./deploy.sh
diff --git a/docs/installationprocedure/expansion.rst b/docs/installationprocedure/expansion.rst
deleted file mode 100644
index 697945ba..00000000
--- a/docs/installationprocedure/expansion.rst
+++ /dev/null
@@ -1,339 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Expansion Guide
-===============
-
-Bare Metal Expansion
---------------------
-
-Edit NETWORK File
-~~~~~~~~~~~~~~~~~
-
-The below file is the inventory template of deployment nodes:
-
- "./deploy/conf/hardware_environment/huawei-pod1/network.yml"
-
-You can edit the network.yml which you had edited before the first deployment.
-
-NOTE:
-External subnet's ip_range should be changed as the first 6 IPs are already taken
-by the first deployment.
-
-Edit DHA File
-~~~~~~~~~~~~~
-
-The below file is the inventory template of deployment nodes:
-
-"./deploy/conf/hardware_environment/expansion-sample/hardware_cluster_expansion.yml"
-
-You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
-
- - name -- Host name for deployment node after installation.
-
- - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
- from Jumphost.
-
- - ipmiUser -- IPMI Username for deployment node.
-
- - ipmiPass -- IPMI Password for deployment node.
-
- - mac -- MAC Address of deployment node PXE NIC .
-
-**Set TYPE/FLAVOR and POWER TOOL**
-
-E.g.
-.. code-block:: yaml
-
- TYPE: baremetal
- FLAVOR: cluster
- POWER_TOOL: ipmitool
-
-**Set ipmiUser/ipmiPass and ipmiVer**
-
-E.g.
-
-.. code-block:: yaml
-
- ipmiUser: USER
- ipmiPass: PASSWORD
- ipmiVer: '2.0'
-
-**Assignment of roles to servers**
-
-E.g. Only increase one compute node
-
-.. code-block:: yaml
-
- hosts:
- - name: host6
- mac: 'E8:4D:D0:BA:60:45'
- interfaces:
- - eth1: '08:4D:D0:BA:60:44'
- ipmiIp: 172.16.131.23
- roles:
- - compute
-
-
-E.g. Increase two compute nodes
-
-.. code-block:: yaml
-
- hosts:
- - name: host6
- mac: 'E8:4D:D0:BA:60:45'
- interfaces:
- - eth1: '08:4D:D0:BA:60:44'
- ipmiIp: 172.16.131.23
- roles:
- - compute
-
- - name: host6
- mac: 'E8:4D:D0:BA:60:78'
- interfaces:
- - eth1: '08:4D:56:BA:60:83'
- ipmiIp: 172.16.131.23
- roles:
- - compute
-
-Start Expansion
-~~~~~~~~~~~~~~~
-
-1. Edit deploy.sh
-
-Set the EXPANSION to true.
-
-E.g.
-
-.. code-block:: bash
-
- ######################### Deploy or Expansion ###############################
- # Modify network.yml and virtual_cluster_expansion.yml or
- # hardware_cluster_expansion.yml.
- # Edit the DHA and NETWORK envionment variables.
- # External subnet's ip_range and management ip should be changed as the
- # first 6 IPs are already taken by the first deployment.
- # VIRT_NUMBER decide how many virtual machines needs to expand when virtual expansion
-
- export EXPANSION="true"
- export MANAGEMENT_IP_START="10.1.0.55"
- #export VIRT_NUMBER=1
- export DEPLOY_FIRST_TIME="false"
-
-
-Set OS version and OpenStack version for deployment nodes.
-
-E.g.
-
-.. code-block:: bash
-
- ######################### The environment for Openstack ######################
- # Ubuntu16.04 Newton
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=newton_xenial
-
- # Ubuntu14.04 Mitaka
- #export OS_VERSION=trusty
- #export OPENSTACK_VERSION=mitaka
-
- # Ubuntu16.04 Mitaka
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=mitaka_xenial
-
- # Centos7 Mitaka
- #export OS_VERSION=centos7
- #export OPENSTACK_VERSION=mitaka
-
- # Redhat7 OSP9
- #export OS_VERSION=redhat7
- #export OPENSTACK_VERSION=osp9
-
-NOTE:
-The OS version and OpenStack version should be same as the first deployment.
-
-Set ISO image that you want to deploy
-
-E.g.
-
-.. code-block:: bash
-
- # ISO_URL is your iso's absolute path
- export ISO_URL=file:///home/compass/compass4nfv.iso
- # or
- # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
-
-NOTE:
-The ISO should be same as the first deployment.
-
-Set scenario that you want to expansion
-
-E.g.
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/hardware_environment/expansion-sample/hardware_cluster_expansion.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
-
-Set jumpserver PXE NIC
-
-E.g.
-
-.. code-block:: bash
-
- INSTALL_NIC=${INSTALL_NIC:-eth1}
-
-Check the environment variable.
-
-2. Run ``deploy.sh``
-
-.. code-block:: bash
-
- ./deploy.sh
-
-Virtual Expansion
------------------
-
-Edit NETWORK File
-~~~~~~~~~~~~~~~~~
-
-The below file is the inventory template of deployment nodes:
-
- "./deploy/conf/vm_environment/huawei-virtual1/network.yml"
-
-You can edit the network.yml which you had edited before the first deployment.
-
-NOTE:
-External subnet's ip_range should be changed as the first 6 IPs are already taken
-by the first deployment.
-
-Edit DHA File
-~~~~~~~~~~~~~
-
-The below file is the inventory template of deployment nodes:
-
-"./deploy/conf/vm_environment/virtual_cluster_expansion.yml"
-
-**Set TYPE and FLAVOR**
-
-E.g.
-
-.. code-block:: yaml
-
- TYPE: virtual
- FLAVOR: cluster
-
-**Assignment of roles to servers**
-
-E.g. Only increase one compute node
-
-.. code-block:: yaml
-
- hosts:
- - name: host6
- roles:
- - compute
-
-E.g. Increase two compute nodes
-
-.. code-block:: yaml
-
- hosts:
- - name: host6
- roles:
- - compute
-
- - name: host7
- roles:
- - compute
-
-Start Expansion
-~~~~~~~~~~~~~~~
-
-1. Edit add.sh
-
-Set the EXPANSION to true.
-
-E.g.
-
-.. code-block:: bash
-
- ######################### Deploy or Expansion ###############################
- # Modify network.yml and virtual_cluster_expansion.yml or
- # hardware_cluster_expansion.yml.
- # Edit the DHA and NETWORK envionment variables.
- # External subnet's ip_range and management ip should be changed as the
- # first 6 IPs are already taken by the first deployment.
- # VIRT_NUMBER decide how many virtual machines needs to expand when virtual expansion
-
- export EXPANSION="true"
- export MANAGEMENT_IP_START="10.1.0.55"
- export VIRT_NUMBER=1
- export DEPLOY_FIRST_TIME="false"
-
-Set OS version and OpenStack version for deployment nodes.
-
-E.g.
-
-.. code-block:: bash
-
- ######################### The environment for Openstack ######################
- # Ubuntu16.04 Newton
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=newton_xenial
-
- # Ubuntu14.04 Mitaka
- #export OS_VERSION=trusty
- #export OPENSTACK_VERSION=mitaka
-
- # Ubuntu16.04 Mitaka
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=mitaka_xenial
-
- # Centos7 Mitaka
- #export OS_VERSION=centos7
- #export OPENSTACK_VERSION=mitaka
-
- # Redhat7 OSP9
- #export OS_VERSION=redhat7
- #export OPENSTACK_VERSION=osp9
-
-NOTE:
-The OS version and OpenStack version should be same as the first deployment.
-
-Set ISO image that you want to deploy
-
-E.g.
-
-.. code-block:: bash
-
- # ISO_URL is your iso's absolute path
- export ISO_URL=file:///home/compass/compass4nfv.iso
- # or
- # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
-
-NOTE:
-The OS version and OpenStack version should be same as the first deployment.
-
-Set scenario that you want to expansion
-
-E.g.
-
-.. code-block:: bash
-
- # DHA is your dha.yml's path
- export DHA=./deploy/conf/vm_environment/virtual_cluster_expansion.yml
-
- # NETWORK is your network.yml's path
- export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
-
-Check the environment variable.
-
-2. Run ``deploy.sh``
-
-.. code-block:: bash
-
- ./deploy.sh
diff --git a/docs/FAQ/faq.rst b/docs/release/FAQ/faq.rst
index 177ff0bb..177ff0bb 100644
--- a/docs/FAQ/faq.rst
+++ b/docs/release/FAQ/faq.rst
diff --git a/docs/FAQ/index.rst b/docs/release/FAQ/index.rst
index d116e26b..c3e6f375 100644
--- a/docs/FAQ/index.rst
+++ b/docs/release/FAQ/index.rst
@@ -1,9 +1,9 @@
.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
.. http://creativecommons.org/licenses/by/4.0
-=========================================================
-OPNFV(Colorado) Compass4nfv Frequently Asked Questions
-=========================================================
+======================================
+Compass4nfv Frequently Asked Questions
+======================================
.. toctree::
:numbered:
diff --git a/docs/release/installation/bmdeploy.rst b/docs/release/installation/bmdeploy.rst
new file mode 100644
index 00000000..43f08370
--- /dev/null
+++ b/docs/release/installation/bmdeploy.rst
@@ -0,0 +1,558 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Installation on Bare Metal
+==========================
+
+Nodes Configuration (Bare Metal Deployment)
+-------------------------------------------
+
+The below file is the inventory template of deployment nodes:
+
+"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml"
+
+The "dha.yml" is a collectively name for "os-nosdn-nofeature-ha.yml
+os-ocl-nofeature-ha.yml os-odl_l2-moon-ha.yml etc".
+
+You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
+
+ - name -- Host name for deployment node after installation.
+
+ - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
+ or IPMI 2.0 is available.
+
+ - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
+ from Jumphost.
+
+ - ipmiUser -- IPMI Username for deployment node.
+
+ - ipmiPass -- IPMI Password for deployment node.
+
+ - mac -- MAC Address of deployment node PXE NIC.
+
+ - interfaces -- Host NIC renamed according to NIC MAC addresses when OS provisioning.
+
+ - roles -- Components deployed.
+
+**Set TYPE/FLAVOR and POWER TOOL**
+
+E.g.
+.. code-block:: yaml
+
+ TYPE: baremetal
+ FLAVOR: cluster
+ POWER_TOOL: ipmitool
+
+**Set ipmiUser/ipmiPass and ipmiVer**
+
+E.g.
+
+.. code-block:: yaml
+
+ ipmiUser: USER
+ ipmiPass: PASSWORD
+ ipmiVer: '2.0'
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+NOTE:
+THE 'ha' role MUST BE SELECT WITH CONTROLLERS, EVEN THERE IS ONLY ONE CONTROLLER NODE.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - ceph-adm
+ - ceph-mon
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+ - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - odl
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - onos
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+Network Configuration (Bare Metal Deployment)
+---------------------------------------------
+
+Before deployment, there are some network configuration to be checked based
+on your network topology.Compass4nfv network default configuration file is
+"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml".
+This file is an example, you can customize by yourself according to specific network
+environment.
+
+In this network.yml, there are several config sections listed following(corresponed to the
+ordre of the config file):
+
+Provider Mapping
+~~~~~~~~~~~~~~~~
+
+ - name -- provider network name.
+
+ - network -- default as physnet, do not change it.
+
+ - interfaces -- the NIC or Bridge attached by the Network.
+
+ - type -- the type of the NIC or Bridge(vlan for NIC and ovs for Bridge, either).
+
+ - roles -- all the possible roles of the host machines which connected by this
+ network(mostly put both controller and compute).
+
+System Interface
+~~~~~~~~~~~~~~~~
+
+ - name -- Network name.
+
+ - interfaces -- the NIC or Bridge attached by the Network.
+
+ - vlan_tag -- if type is vlan, add this tag before 'type' tag.
+
+ - type -- the type of the NIC or Bridge(vlan for NIC and ovs for Bridge, either).
+
+ - roles -- all the possible roles of the host machines which connected by this
+ network(mostly put both controller and compute).
+
+IP Settings
+~~~~~~~~~~~
+
+ - name -- network name corresponding the the network name in System Interface section one by one.
+
+ - ip_ranges -- ip addresses range provided for this network.
+
+ - cidr -- the IPv4 address and its associated routing prefix and subnet maskã
+
+ - gw -- need to add this line only if network is external.
+
+ - roles -- all the possible roles of the host machines which connected by this
+ network(mostly put both controller and compute).
+
+Internal VIP(virtual or proxy IP)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ - ip -- virtual or proxy ip address, must be in the same subnet with mgmt network
+ but must not be in the range of mgmt network.
+
+ - netmask -- the length of netmask
+
+ - interface -- mostly mgmt.
+
+Public VIP
+~~~~~~~~~~
+
+ - ip -- virtual or proxy ip address, must be in the same subnet with external
+ network but must not be in the range of external network.
+
+ - netmask -- the length of netmask
+
+ - interface -- mostly external.
+
+ONOS NIC
+~~~~~~~~
+
+ - the NIC for ONOS, if there is no ONOS configured, leave it unchanged.
+
+
+Public Network
+~~~~~~~~~~~~~~
+
+ - enable -- must be True(if False, you need to set up provider network manually).
+
+ - network -- leave it ext-net.
+
+ - type -- the type of the ext-net above, such as flat or vlan.
+
+ - segment_id -- when the type is vlan, this should be id of vlan.
+
+ - subnet -- leave it ext-subnet.
+
+ - provider_network -- leave it physnet.
+
+ - router -- leave it router-ext.
+
+ - enable_dhcp -- must be False.
+
+ - no_gateway -- must be False.
+
+ - external_gw -- same as gw in ip_settings.
+
+ - floating_ip_cidr -- cidr for floating ip, see explanation in ip_settings.
+
+ - floating_ip_start -- define range of floating ip with floating_ip_end(this
+ defined range must not be included in ip range of external configured in
+ ip_settings section).
+
+ - floating_ip_end -- define range of floating ip with floating_ip_start.
+
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+ +--+ +--+ +--+
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ Jumphost +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host1 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host2 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host3 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | | | | |
+ +-++ ++-+ +-++
+ ^ ^ ^
+ | | |
+ | | |
+ +-+-------------------------+ | |
+ | External Network | | |
+ +---------------------------+ | |
+ +-----------------------+---+ |
+ | IPMI Network | |
+ +---------------------------+ |
+ +-------------------------+-+
+ | PXE(Installation) Network |
+ +---------------------------+
+
+
+
+
+**The following figure shows the interfaces and nics of JumpHost and deployment nodes in
+huawei-pod1 network configuration(default one nic for openstack networks).**
+
+.. code-block:: console
+
+
+ +--------------JumpHost-------------+
+ | |
+ | +-+Compass+-+ |
+ | | + +--------+ | External-network
+ | | eth2+---+br-ext +-+eth0+----------------------+
+ | | + +--------+ | |
+ | | | | |
+ | | | | |
+ | | + +--------+ | Install-network |
+ | | eth1+---+install +-+eth1+-----------------+ |
+ | | + +--------+ | | |
+ | | | | | |
+ | | | | | |
+ | | + | IPMI-network | |
+ | | eth0 eth2+-----------+ | |
+ | | + | | | |
+ | +---+VM+----+ | | | |
+ +-----------------------------------+ | | |
+ | | |
+ | | |
+ | | |
+ | | |
+ +---------------Host1---------------+ | | |
+ | | | | |
+ | eth0+----------------+ |
+ | | | | |
+ | mgmt +--------+ | | | |
+ | | | | | |
+ | +-----------+ | | | | |
+ | external+----+ br-prv +----+eth1+---------------------+
+ | +-----------+ | | | | |
+ | | | | | |
+ | storage +-----+ | | | |
+ | | | | |
+ +-----------------------------------+ | | |
+ | IPMI+-----------+ | |
+ +-----------------------------------+ | | |
+ | | |
+ | | |
+ | | |
+ +---------------Host2---------------+ | | |
+ | | | | |
+ | eth0+----------------+ |
+ | | | |
+ | mgmt +--------+ | | |
+ | | | | |
+ | +-----------+ | | | |
+ | external+----+ br-prv +----+eth1+---------------------+
+ | +-----------+ | | |
+ | | | |
+ | storage +-----+ | |
+ | | |
+ +-----------------------------------+ |
+ | IPMI+-----------+
+ +-----------------------------------+
+
+**The following figure shows the interfaces and nics of JumpHost and deployment nodes in
+intel-pod8 network configuration(openstack networks are seperated by multiple NICs).**
+
+.. code-block:: console
+
+
+ +-------------+JumpHost+------------+
+ | |
+ | +-+Compass+-+ |
+ | | + +--------+ | External-network
+ | | eth2+---+br-ext +-+eth0+----------------------+
+ | | + +--------+ | |
+ | | | | |
+ | | | | |
+ | | + +--------+ | Install-network |
+ | | eth1+---+install +-+eth1+-----------------+ |
+ | | + +--------+ | | |
+ | | | | | |
+ | | | | | |
+ | | + | IPMI-network | |
+ | | eth0 eth2+-----------+ | |
+ | | + | | | |
+ | +---+VM+----+ | | | |
+ +-----------------------------------+ | | |
+ | | |
+ | | |
+ | | |
+ | | |
+ +--------------+Host1+--------------+ | | |
+ | | | | |
+ | eth0+----------------+ |
+ | | | | |
+ | +--------+ | | | |
+ | external+----+br-prv +-+eth1+---------------------+
+ | +--------+ | | | |
+ | storage +---------------+eth2+-------------------------+
+ | | | | | |
+ | Mgmt +---------------+eth3+----------------------------+
+ | | | | | | |
+ | | | | | | |
+ +-----------------------------------+ | | | | |
+ | IPMI+-----------+ | | | |
+ +-----------------------------------+ | | | | |
+ | | | | |
+ | | | | |
+ | | | | |
+ | | | | |
+ +--------------+Host2+--------------+ | | | | |
+ | | | | | | |
+ | eth0+----------------+ | | |
+ | | | | | |
+ | +--------+ | | | | |
+ | external+----+br-prv +-+eth1+---------------------+ | |
+ | +--------+ | | | |
+ | storage +---------------+eth2+-------------------------+ |
+ | | | storage-network |
+ | Mgmt +---------------+eth3+----------------------------+
+ | | | mgmt-network
+ | | |
+ +-----------------------------------+ |
+ | IPMI+-----------+
+ +-----------------------------------+
+
+
+Start Deployment (Bare Metal Deployment)
+----------------------------------------
+
+1. Edit deploy.sh
+
+1.1. Set OS version for deployment nodes.
+ Compass4nfv supports ubuntu and centos based openstack newton.
+
+E.g.
+
+.. code-block:: bash
+
+ # Set OS version for target hosts
+ # Ubuntu16.04 or CentOS7
+ export OS_VERSION=xenial
+ or
+ export OS_VERSION=centos7
+
+1.2. Set ISO image corresponding to your code
+
+E.g.
+
+.. code-block:: bash
+
+ # Set ISO image corresponding to your code
+ export ISO_URL=file:///home/compass/compass4nfv.iso
+
+1.3. Set hardware deploy jumpserver PXE NIC. (set eth1 E.g.)
+ You do not need to set it when virtual deploy.
+
+E.g.
+
+.. code-block:: bash
+
+ # Set hardware deploy jumpserver PXE NIC
+ # you need to comment out it when virtual deploy
+ export INSTALL_NIC=eth1
+
+1.4. Set scenario that you want to deploy
+
+E.g.
+
+nosdn-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+ocl-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
+
+odl_l2-moon scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+odl_l2-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+odl_l3-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+onos-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
+onos-sfc deploy scenario sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
+2. Run ``deploy.sh``
+
+.. code-block:: bash
+
+ ./deploy.sh
diff --git a/docs/release/installation/configure-network.rst b/docs/release/installation/configure-network.rst
new file mode 100644
index 00000000..2303be45
--- /dev/null
+++ b/docs/release/installation/configure-network.rst
@@ -0,0 +1,107 @@
+Configure network
+=================
+network_cfg.yaml file describes networks configuration for openstack on hosts. It
+specifies host network mapping and ip assignment of networks to be installed on hosts.
+Compass4nfv includes a sample network_cfg.yaml under
+``compass4nfv/deploy/conf/network_cfg.yaml``
+
+There are three openstack networks to be installed: external, mgmt and storage. These
+three networks can be shared on one physical nic or on separate nics (multi-nic). The
+sample included in compass4nfv uses one nic. For multi-nic configuration, see multi-nic
+configuration.
+
+Configure openstack network
+---------------------------
+
+****! All interface name in network_cfg.yaml must be identified in dha file by mac address !****
+
+Compass4nfv will install networks on host as described in this configuration. It will look
+for physical nic on host by **mac address** from dha file and rename nic to the name with
+that mac address. Therefore, any network interface name that is not identified by mac
+address in dha file will not be installed correctly as compass4nfv cannot find the nic.
+
+**Configure provider network**
+
+.. code-block:: yaml
+
+ provider_net_mappings:
+ - name: br-prv
+ network: physnet
+ interface: eth1
+ type: ovs
+ role:
+ - controller
+ - compute
+
+The external nic in dha file must be named ``eth1`` with mac address. If user uses a
+different interface name in dha file, change ``eth1`` to that name here.
+Note: User cannot use eth0 for external interface name as install/pxe network is named as
+such.
+
+**Configure openstack mgmt&storage network**:
+
+.. code-block:: yaml
+
+ sys_intf_mappings:
+ - name: mgmt
+ interface: eth1
+ vlan_tag: 101
+ type: vlan
+ role:
+ - controller
+ - compute
+ - name: storage
+ interface: eth1
+ vlan_tag: 102
+ type: vlan
+ role:
+ - controller
+ - compute
+
+Change ``vlan_tag`` of ``mgmt`` and ``storage`` to corresponding vlan tag configured on
+switch.
+
+**Note**: for virtual deployment, there is no need to modify mgmt&storage network.
+
+If using multi-nic feature, i.e, separate nic for mgmt or storage network, user needs to
+change ``name`` to desired nic name (need to match dha file). Please see multi-nic
+configuration.
+
+Assign IP address to networks
+-----------------------------------------
+
+``ip_settings`` section specifics ip assignment for openstack networks.
+
+User can use default ip range for mgmt&storage network.
+
+for external networks:
+
+.. code-block:: yaml
+
+ - name: external
+ ip_ranges:
+ - - "192.168.50.210"
+ - "192.168.50.220"
+ cidr: "192.168.50.0/24"
+ gw: "192.168.50.1"
+ role:
+ - controller
+ - compute
+
+Provide at least number of hosts available ip for external IP range(these ips will be
+assigned to each host). Provide actual cidr and gateway in ``cidr`` and ``gw`` fields.
+
+**configure public IP for horizon dashboard**
+
+.. code-block:: yaml
+
+ public_vip:
+ ip: 192.168.50.240
+ netmask: "24"
+ interface: external
+
+Provide an external ip in ``ip`` field. This ip cannot be within the ip range assigned to
+external network configured in pervious section. It will be used for horizon address.
+
+See section 6.2 (Vitual) and 7.2 (BareMetal) for graphs illustrating network topology.
+
diff --git a/docs/release/installation/expansion.rst b/docs/release/installation/expansion.rst
new file mode 100644
index 00000000..df0edb2d
--- /dev/null
+++ b/docs/release/installation/expansion.rst
@@ -0,0 +1,157 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Expansion Guide
+===============
+
+Edit NETWORK File
+-----------------
+
+The below file is the inventory template of deployment nodes:
+
+ "./deploy/conf/hardware_environment/huawei-pod1/network.yml"
+
+You can edit the network.yml which you had edited before the first deployment.
+
+NOTE:
+External subnet's ip_range should be changed as the first 6 IPs are already taken
+by the first deployment.
+
+Edit DHA File
+-------------
+
+The below file is the inventory template of deployment nodes:
+
+"./deploy/conf/hardware_environment/expansion-sample/hardware_cluster_expansion.yml"
+
+You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
+
+ - name -- Host name for deployment node after installation.
+
+ - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
+ from Jumphost.
+
+ - ipmiUser -- IPMI Username for deployment node.
+
+ - ipmiPass -- IPMI Password for deployment node.
+
+ - mac -- MAC Address of deployment node PXE NIC .
+
+**Set TYPE/FLAVOR and POWER TOOL**
+
+E.g.
+
+.. code-block:: yaml
+
+ TYPE: baremetal
+ FLAVOR: cluster
+ POWER_TOOL: ipmitool
+
+**Set ipmiUser/ipmiPass and ipmiVer**
+
+E.g.
+
+.. code-block:: yaml
+
+ ipmiUser: USER
+ ipmiPass: PASSWORD
+ ipmiVer: '2.0'
+
+**Assignment of roles to servers**
+
+E.g. Only increase one compute node
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host6
+ mac: 'E8:4D:D0:BA:60:45'
+ interfaces:
+ - eth1: '08:4D:D0:BA:60:44'
+ ipmiIp: 172.16.131.23
+ roles:
+ - compute
+
+
+E.g. Increase two compute nodes
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host6
+ mac: 'E8:4D:D0:BA:60:45'
+ interfaces:
+ - eth1: '08:4D:D0:BA:60:44'
+ ipmiIp: 172.16.131.23
+ roles:
+ - compute
+
+ - name: host6
+ mac: 'E8:4D:D0:BA:60:78'
+ interfaces:
+ - eth1: '08:4D:56:BA:60:83'
+ ipmiIp: 172.16.131.23
+ roles:
+ - compute
+
+Start Expansion
+~~~~~~~~~~~~~~~
+
+1. Edit network.yml and dha.yml file
+
+ You need to Edit network.yml and virtual_cluster_expansion.yml or
+ hardware_cluster_expansion.yml. Edit the DHA and NETWORK envionment variables.
+ External subnet's ip_range and management ip should be changed as the first 6
+ IPs are already taken by the first deployment.
+
+E.g.
+
+.. code-block:: bash
+
+ --- network.yml 2017-02-16 20:07:10.097878150 +0800
+ +++ network_expansion.yml 2017-02-17 11:40:08.734480478 +0800
+ @@ -56,7 +56,7 @@
+ - name: external
+ ip_ranges:
+ - - - "192.168.116.201"
+ + - - "192.168.116.206"
+ - "192.168.116.221"
+ cidr: "192.168.116.0/24"
+ gw: "192.168.116.1"
+
+2. Edit deploy.sh
+
+2.1. Set EXPANSION and VIRT_NUMBER.
+ VIRT_NUMBER decide how many virtual machines needs to expand when virtual expansion
+
+E.g.
+
+.. code-block:: bash
+
+ export EXPANSION="true"
+ export MANAGEMENT_IP_START="10.1.0.55"
+ export VIRT_NUMBER=1
+ export DEPLOY_FIRST_TIME="false"
+
+
+2.2. Set scenario that you need to expansion
+
+E.g.
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/expansion-sample/hardware_cluster_expansion.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+Note: Other environment variable shoud be same as your first deployment.
+ Please check the environment variable before you run deploy.sh.
+
+2. Run ``deploy.sh``
+
+.. code-block:: bash
+
+ ./deploy.sh
diff --git a/docs/release/installation/featureTable.rst b/docs/release/installation/featureTable.rst
new file mode 100644
index 00000000..e5ad9776
--- /dev/null
+++ b/docs/release/installation/featureTable.rst
@@ -0,0 +1,51 @@
+Features
+========
+
+Supported Openstack Version and OS
+----------------------------------
+
++---------------+----------+-----------+-----------+-----------+
+| | OS | OpenStack | OpenStack | OpenStack |
+| | only | Liberty | Mitaka | Newton |
++---------------+----------+-----------+-----------+-----------+
+| CentOS 7 | yes | yes | yes | yes |
++---------------+----------+-----------+-----------+-----------+
+| Ubuntu trusty | yes | yes | yes | no |
++---------------+----------+-----------+-----------+-----------+
+| Ubuntu xenial | yes | no | yes | yes |
++---------------+----------+-----------+-----------+-----------+
+
+
+Supported Openstack Flavor and Features
+---------------------------------------
+
++---------------+--------------+--------------+---------------+
+| | OpenStack | OpenStack | OpenStack |
+| | Liberty | Mitaka | Newton |
++---------------+--------------+--------------+---------------+
+| Virtual | Yes | Yes | Yes |
+| Deployment | | | |
++---------------+--------------+--------------+---------------+
+| Baremetal | Yes | Yes | Yes |
+| Deployment | | | |
++---------------+--------------+--------------+---------------+
+| HA | Yes | Yes | Yes |
+| | | | |
++---------------+--------------+--------------+---------------+
+| Ceph | Yes | Yes | Yes |
+| | | | |
++---------------+--------------+--------------+---------------+
+| SDN | Yes | Yes | Yes* |
+| ODL/ONOS | | | |
++---------------+--------------+--------------+---------------+
+| Compute Node | Yes | Yes | Yes |
+| Expansion | | | |
++---------------+--------------+--------------+---------------+
+| Multi-Nic | Yes | Yes | Yes |
+| Support | | | |
++---------------+--------------+--------------+---------------+
+| Boot | Yes | Yes | Yes |
+| Recovery | | | |
++---------------+--------------+--------------+---------------+
+
+* ONOS support will Release in Danube 2.0 or 3.0
diff --git a/docs/installationprocedure/index.rst b/docs/release/installation/index.rst
index 7bcbc281..85805d64 100644
--- a/docs/installationprocedure/index.rst
+++ b/docs/release/installation/index.rst
@@ -1,16 +1,18 @@
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-********************************************************
-OPNFV(Colorado) Compass4nfv Installation Instructions
-********************************************************
+=====================================
+Compass4nfv Installation Instructions
+=====================================
.. toctree::
:numbered:
:maxdepth: 4
introduction.rst
- installation.instruction.rst
+ featureTable.rst
+ preconditions.rst
+ configure-network.rst
bmdeploy.rst
vmdeploy.rst
offline-deploy.rst
diff --git a/docs/installationprocedure/installation.instruction.rst b/docs/release/installation/installation.rst
index 87c8a55c..18bac119 100644
--- a/docs/installationprocedure/installation.instruction.rst
+++ b/docs/release/installation/installation.rst
@@ -6,7 +6,7 @@ Compass4nfv configuration
=========================
This document describes providing guidelines on how to install and
-configure the Colorado release of OPNFV when using Compass as a
+configure the Danube release of OPNFV when using Compass as a
deployment tool including required software and hardware
configurations.
@@ -21,7 +21,7 @@ networking and Unix/Linux administration.
Preconditions
-------------
-Before starting the installation of the Colorado release of OPNFV,
+Before starting the installation of the Danube release of OPNFV,
some planning must be done.
@@ -38,10 +38,10 @@ The daily build ISO can be retrieved via OPNFV artifacts repository:
http://artifacts.opnfv.org/compass4nfv.html
-NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image.
+NOTE: Search the keyword "compass4nfv/Danube" to locate the ISO image.
E.g.
-compass4nfv/colorado/opnfv-2016-09-18_08-15-13.iso
+compass4nfv/Danube/opnfv-2016-09-18_08-15-13.iso
The name of iso image includes the time of iso building, you can get the daily
ISO according the building time.
@@ -58,9 +58,9 @@ To retrieve the repository of Compass4nfv on Jumphost use the following command:
NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
-To get stable /colorado release, you can use the following command:
+To get stable /Danube release, you can use the following command:
-- git checkout colorado.1.0
+- git checkout Danube.1.0
Setup Requirements
------------------
@@ -92,7 +92,7 @@ The Jumphost requirements are outlined below:
5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
-6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk)
+6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deployment needs 1 TB Hard Disk)
Bare Metal Node Requirements
@@ -152,3 +152,12 @@ In order to execute a deployment, one must gather the following information:
2. IPMI login information for the nodes (user/pass).
3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
+
+
+Configurations
+---------------
+
+There are three configuration files a user needs to modify for a cluster deployment.
+``network_cfg.yaml`` for openstack networks on hosts.
+``dha file`` for host role, IPMI credential and host nic idenfitication (MAC address).
+``deploy.sh`` for os and openstack version.
diff --git a/docs/installationprocedure/introduction.rst b/docs/release/installation/introduction.rst
index 835a5788..7470363a 100644
--- a/docs/installationprocedure/introduction.rst
+++ b/docs/release/installation/introduction.rst
@@ -5,7 +5,7 @@
Abstract
========
-This document describes how to install the Colorado release of OPNFV when
+This document describes how to install the Danube release of OPNFV when
using Compass4nfv as a deployment tool covering it's limitations, dependencies
and required system resources.
@@ -16,6 +16,9 @@ Version history
| **Date** | **Ver.** | **Author** | **Comment** |
| | | | |
+--------------------+--------------------+--------------------+---------------------------+
+| 2017-02-21 | 3.0.0 | Justin chi | Changes for D release |
+| | | (HUAWEI) | |
++--------------------+--------------------+--------------------+---------------------------+
| 2016-09-13 | 2.1.0 | Yuenan Li | Adjusted the docs |
| | | (HUAWEI) | structure |
+--------------------+--------------------+--------------------+---------------------------+
diff --git a/docs/installationprocedure/offline-deploy.rst b/docs/release/installation/offline-deploy.rst
index 68c78a0b..68c78a0b 100644
--- a/docs/installationprocedure/offline-deploy.rst
+++ b/docs/release/installation/offline-deploy.rst
diff --git a/docs/installationprocedure/postinstall.rst b/docs/release/installation/postinstall.rst
index f9b7aa92..f9b7aa92 100644
--- a/docs/installationprocedure/postinstall.rst
+++ b/docs/release/installation/postinstall.rst
diff --git a/docs/release/installation/preconditions.rst b/docs/release/installation/preconditions.rst
new file mode 100644
index 00000000..18bac119
--- /dev/null
+++ b/docs/release/installation/preconditions.rst
@@ -0,0 +1,163 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Compass4nfv configuration
+=========================
+
+This document describes providing guidelines on how to install and
+configure the Danube release of OPNFV when using Compass as a
+deployment tool including required software and hardware
+configurations.
+
+Installation and configuration of host OS, OpenStack, OpenDaylight,
+ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
+nodes.
+
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
+
+
+Preconditions
+-------------
+
+Before starting the installation of the Danube release of OPNFV,
+some planning must be done.
+
+
+Retrieving the installation ISO image
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+First of all, The installation ISO is needed for deploying your OPNFV
+environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
+and so on.
+
+The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
+
+The daily build ISO can be retrieved via OPNFV artifacts repository:
+
+http://artifacts.opnfv.org/compass4nfv.html
+
+NOTE: Search the keyword "compass4nfv/Danube" to locate the ISO image.
+
+E.g.
+compass4nfv/Danube/opnfv-2016-09-18_08-15-13.iso
+
+The name of iso image includes the time of iso building, you can get the daily
+ISO according the building time.
+The git url and sha1 of Compass4nfv are recorded in properties files,
+According these, the corresponding deployment scripts can be retrieved.
+
+
+Getting the deployment scripts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To retrieve the repository of Compass4nfv on Jumphost use the following command:
+
+- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
+
+NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
+
+To get stable /Danube release, you can use the following command:
+
+- git checkout Danube.1.0
+
+Setup Requirements
+------------------
+
+If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
+than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
+servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
+1 for compute.
+
+
+Jumphost Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+The Jumphost requirements are outlined below:
+
+1. Ubuntu 14.04 (Pre-installed).
+
+2. Root access.
+
+3. libvirt virtualization support.
+
+4. Minimum 2 NICs.
+
+ - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
+
+ - IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
+
+ - External Network (Optional: Internet access)
+
+5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
+
+6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deployment needs 1 TB Hard Disk)
+
+
+Bare Metal Node Requirements
+----------------------------
+
+Bare Metal nodes require:
+
+1. IPMI enabled on OOB interface for power control.
+
+2. BIOS boot priority should be PXE first then local hard disk.
+
+3. Minimum 3 NICs.
+
+ - PXE installation Network (Broadcasting PXE request)
+
+ - IPMI Network (Receiving IPMI command from Jumphost)
+
+ - External Network (OpenStack mgmt/external/storage/tenant network)
+
+
+Network Requirements
+--------------------
+
+Network requirements include:
+
+1. No DHCP or TFTP server running on networks used by OPNFV.
+
+2. 2-6 separate networks with connectivity between Jumphost and nodes.
+
+ - PXE installation Network
+
+ - IPMI Network
+
+ - Openstack mgmt Network*
+
+ - Openstack external Network*
+
+ - Openstack tenant Network*
+
+ - Openstack storage Network*
+
+3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
+
+4. External network has Internet access, meaning a gateway and DNS availability.
+
+**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
+**NIC(Reconfigurated in network.yml).**
+
+
+Execution Requirements (Bare Metal Only)
+----------------------------------------
+
+In order to execute a deployment, one must gather the following information:
+
+1. IPMI IP addresses of the nodes.
+
+2. IPMI login information for the nodes (user/pass).
+
+3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
+
+
+Configurations
+---------------
+
+There are three configuration files a user needs to modify for a cluster deployment.
+``network_cfg.yaml`` for openstack networks on hosts.
+``dha file`` for host role, IPMI credential and host nic idenfitication (MAC address).
+``deploy.sh`` for os and openstack version.
diff --git a/docs/installationprocedure/references.rst b/docs/release/installation/references.rst
index 69ca4e7b..2dbaa144 100644
--- a/docs/installationprocedure/references.rst
+++ b/docs/release/installation/references.rst
@@ -8,20 +8,14 @@ References
OPNFV
-----
-`OPNFV Home Page <www.opnfv.org>`_
-
-`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_
-
`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
-`OPNFV Compass4nfv release notes <http://artifacts.opnfv.org/compass4nfv/colorado/docs/release-notes/index.html>`_
+`Tutoring videos <https://wiki.opnfv.org/display/compass4nfv/Compass+101>`_
OpenStack
---------
-`OpenStack Mitaka Release artifacts <http://www.openstack.org/software/mitaka>`_
-
-`OpenStack documentation <http://docs.openstack.org>`_
+`OpenStack Newton Release artifacts <http://www.openstack.org/software/Newton>`_
OpenDaylight
------------
diff --git a/docs/installationprocedure/vmdeploy.rst b/docs/release/installation/vmdeploy.rst
index 54d7863e..610ff51a 100644
--- a/docs/installationprocedure/vmdeploy.rst
+++ b/docs/release/installation/vmdeploy.rst
@@ -2,12 +2,34 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-Installation Guide (Virtual Deployment)
-=======================================
+Installation on virtual machines
+================================
Nodes Configuration (Virtual Deployment)
----------------------------------------
+virtual machine setting
+~~~~~~~~~~~~~~~~~~~~~~~
+
+ - VIRT_NUMBER -- the number of nodes for virtual deployment.
+
+ - VIRT_CPUS -- the number of CPUs allocated per virtual machine.
+
+ - VIRT_MEM -- the memory size(MB) allocated per virtual machine.
+
+ - VIRT_DISK -- the disk size allocated per virtual machine.
+
+.. code-block:: bash
+
+ export VIRT_NUMBER=${VIRT_NUMBER:-5}
+ export VIRT_CPUS=${VIRT_CPU:-4}
+ export VIRT_MEM=${VIRT_MEM:-16384}
+ export VIRT_DISK=${VIRT_DISK:-200G}
+
+
+roles setting
+~~~~~~~~~~~~~
+
The below file is the inventory template of deployment nodes:
"./deploy/conf/vm_environment/huawei-virtual1/dha.yml"
@@ -99,99 +121,36 @@ E.g. Openstack and ONOS deployment roles setting
Network Configuration (Virtual Deployment)
------------------------------------------
-Before deployment, there are some network configuration to be checked based
-on your network topology.Compass4nfv network default configuration file is
-"compass4nfv/deploy/conf/vm_environment/huawei-virtual1/network.yml".
-You can write your own reference to it.
-
-**The following figure shows the default network configuration.**
-
-.. code-block:: console
-
-
- +--+ +--+
- | | | |
- | | +------------+ | |
- | +------+ Jumphost +------+ |
- | | +------+-----+ | |
- | | | | |
- | | +------------+ |
- | | | |
- | | +------------+ | |
- | +------+ host1 +------+ |
- | | +------+-----+ | |
- | | | | |
- | | +------------+ |
- | | | |
- | | +------------+ | |
- | +------+ host2 +------+ |
- | | +------+-----+ | |
- | | | | |
- | | +------------+ |
- | | | |
- | | +------------+ | |
- | +------+ host3 +------+ |
- | | +------+-----+ | |
- | | | | |
- | | +------------+ |
- | | | |
- | | | |
- +-++ ++-+
- ^ ^
- | |
- | |
- +-+-------------------------+ |
- | External Network | |
- +---------------------------+ |
- +-----------------------+---+
- | Installation Network |
- +---------------------------+
+The same with Baremetal Deployment.
Start Deployment (Virtual Deployment)
-------------------------------------
1. Edit deploy.sh
-Set OS version and OpenStack version for deployment nodes.
- Compass4nfv Colorado supports three OS version based openstack mitaka.
+1.1. Set OS version for deployment nodes.
+ Compass4nfv supports ubuntu and centos based openstack newton.
E.g.
.. code-block:: bash
- ######################### The environment for Openstack ######################
- # Ubuntu16.04 Newton
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=newton_xenial
-
- # Ubuntu14.04 Mitaka
- #export OS_VERSION=trusty
- #export OPENSTACK_VERSION=mitaka
-
- # Ubuntu16.04 Mitaka
- #export OS_VERSION=xenial
- #export OPENSTACK_VERSION=mitaka_xenial
-
- # Centos7 Mitaka
- #export OS_VERSION=centos7
- #export OPENSTACK_VERSION=mitaka
-
- # Redhat7 OSP9
- #export OS_VERSION=redhat7
- #export OPENSTACK_VERSION=osp9
+ # Set OS version for target hosts
+ # Ubuntu16.04 or CentOS7
+ export OS_VERSION=xenial
+ or
+ export OS_VERSION=centos7
-Set ISO image that you want to deploy
+1.2. Set ISO image corresponding to your code
E.g.
.. code-block:: bash
- # ISO_URL is your iso's absolute path
- # export ISO_URL=file:///home/compass/compass4nfv.iso
- # or
- # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
+ # Set ISO image corresponding to your code
+ export ISO_URL=file:///home/compass/compass4nfv.iso
-Set scenario that you want to deploy
+1.3. Set scenario that you want to deploy
E.g.
diff --git a/docs/releasenotes/index.rst b/docs/release/release-notes/index.rst
index e10b8372..20358bc7 100644
--- a/docs/releasenotes/index.rst
+++ b/docs/release/release-notes/index.rst
@@ -1,9 +1,9 @@
.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
.. http://creativecommons.org/licenses/by/4.0
-=========================================
-OPNFV Colorado: Compass4nfv Release Notes
-=========================================
+=========================
+Compass4nfv Release Notes
+=========================
.. toctree::
:numbered:
diff --git a/docs/releasenotes/release-notes.rst b/docs/release/release-notes/release-notes.rst
index ff8ec500..e44e6744 100644
--- a/docs/releasenotes/release-notes.rst
+++ b/docs/release/release-notes/release-notes.rst
@@ -2,7 +2,7 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-Release Note for the Colorado release of OPNFV when using Compass4nfv as a deployment tool.
+Release Note for the Danube release of OPNFV when using Compass4nfv as a deployment tool.
Abstract
========
@@ -25,16 +25,16 @@ Release Data
| **Project** | Compass4nfv |
| | |
+--------------------------------------+--------------------------------------+
-| **Repo/tag** | Compass4nfv/Colorado.1.0 |
+| **Repo/tag** | Compass4nfv/Danube.1.0 |
| | |
+--------------------------------------+--------------------------------------+
-| **Release designation** | Colorado.1.0 |
+| **Release designation** | Danube.1.0 |
| | |
+--------------------------------------+--------------------------------------+
-| **Release date** | September 22 2016 |
+| **Release date** | March 27 2017 |
| | |
+--------------------------------------+--------------------------------------+
-| **Purpose of the delivery** | OPNFV Colorado release |
+| **Purpose of the delivery** | OPNFV Danube release |
| | |
+--------------------------------------+--------------------------------------+
@@ -44,16 +44,16 @@ Deliverables
Software deliverables
~~~~~~~~~~~~~~~~~~~~~
- - Compass4nfv/Colorado.1.0 ISO, please get it from `OPNFV software download page <https://www.opnfv.org/software/>`_
+ - Compass4nfv/Danube.1.0 ISO, please get it from `OPNFV software download page <https://www.opnfv.org/software/>`_
.. _document-label:
Documentation deliverables
~~~~~~~~~~~~~~~~~~~~~~~~~~
- - OPNFV(Colorado) Compass4nfv installation instructions
+ - OPNFV(Danube) Compass4nfv installation instructions
- - OPNFV(Colorado) Compass4nfv Release Notes
+ - OPNFV(Danube) Compass4nfv Release Notes
Version change
--------------
@@ -62,21 +62,21 @@ Version change
Module version change
~~~~~~~~~~~~~~~~~~~~~
-This is the Colorado release of compass4nfv as a deployment toolchain in OPNFV, the following
+This is the Danube release of compass4nfv as a deployment toolchain in OPNFV, the following
upstream components supported with this release.
- - Ubuntu 14.04.3
+ - Ubuntu 16.04/Centos 7.3
- - Openstack (Mitaka release)
+ - Openstack (Newton release)
- - Opendaylight (Beryllium SR2 release)
+ - Opendaylight (Boron SR2 release)
- - ONOS (Goldeneye release)
+ - ONOS (J-bird release/later release)
Document version change
~~~~~~~~~~~~~~~~~~~~~~~
-Adjusted the document structure, and you can see document at `OPNFV(Colorado) Compass4nfv installation instructions <http://artifacts.opnfv.org/compass4nfv/docs/configguide/index.html>`_.
+Adjusted the document structure, and you can see document at `OPNFV(Danube) Compass4nfv installation instructions <http://artifacts.opnfv.org/compass4nfv/docs/configguide/index.html>`_.
Reason for new version
----------------------
@@ -88,13 +88,7 @@ Feature additions
| **JIRA REFERENCE** | **SLOGAN** |
| | |
+--------------------------------------+-----------------------------------------+
-| JIRA: COMPASS-438 | Add A Task Of ONOS-SFC |
| | |
-+--------------------------------------+-----------------------------------------+
-| JIRA: COMPASS-443 | Add MOON in Compass |
-| | |
-+--------------------------------------+-----------------------------------------+
-| JIRA: COMPASS-444 | Add Xenial-mitaka ODL Support |
| | |
+--------------------------------------+-----------------------------------------+
@@ -108,7 +102,7 @@ Bug corrections
| **JIRA REFERENCE** | **SLOGAN** |
| | |
+--------------------------------------+--------------------------------------+
-| JIRA: COMPASS-459 | PXE boot may have NO SIGNAL |
+| | |
| | |
+--------------------------------------+--------------------------------------+
@@ -133,9 +127,7 @@ Known issues
+---------------+----------------------------------------------+
| **Scenario** | **Issue** |
+---------------+----------------------------------------------+
-| MOON | First ODL test FAILS because ODL/Openstack |
-| | federation done in moon is partial. Only |
-| | MD-SAL is federated (not AD-SAL) |
+| | |
+---------------+----------------------------------------------+
| | |
+---------------+----------------------------------------------+
@@ -153,12 +145,11 @@ Known issues
Workarounds
-----------
-`See JIRA <https://jira.opnfv.org/issues/?jql=project%20%3D%20COMPASS%20AND%20labels%20%3D%20C-1.0-Workaround>`_
+
Test Result
===========
-The Colorado release with the Compass4nfv deployment toolchain has undergone QA test
+The Danube release with the Compass4nfv deployment toolchain has undergone QA test
runs with the following results:
- - `Functest test result <http://testresults.opnfv.org/reporting/functest/release/colorado/index-status-compass.html>`_
- - `Yardstick test result <http://testresults.opnfv.org/reporting/yardstick/release/colorado/index-status-compass.html>`_
+