diff options
Diffstat (limited to 'rubbos/app/tomcat-connectors-1.2.32-src/native/Makefile')
| -rw-r--r-- | rubbos/app/tomcat-connectors-1.2.32-src/native/Makefile | 702 |
1 files changed, 702 insertions, 0 deletions
diff --git a/rubbos/app/tomcat-connectors-1.2.32-src/native/Makefile b/rubbos/app/tomcat-connectors-1.2.32-src/native/Makefile new file mode 100644 index 00000000..70c855da --- /dev/null +++ b/rubbos/app/tomcat-connectors-1.2.32-src/native/Makefile @@ -0,0 +1,702 @@ +# Makefile.in generated by automake 1.9.2 from Makefile.am. +# Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed with +# this work for additional information regarding copyright ownership. +# The ASF licenses this file to You under the Apache License, Version 2.0 +# (the "License"); you may not use this file except in compliance with +# the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +srcdir = . +top_srcdir = . + +pkgdatadir = $(datadir)/mod_jk +pkglibdir = $(libdir)/mod_jk +pkgincludedir = $(includedir)/mod_jk +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = /usr/bin/install -c +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = x86_64-unknown-linux-gnu +host_triplet = x86_64-unknown-linux-gnu +target_triplet = x86_64-unknown-linux-gnu +DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in \ + $(top_srcdir)/apache-1.3/Makefile.apxs.in \ + $(top_srcdir)/apache-1.3/Makefile.in \ + $(top_srcdir)/apache-2.0/Makefile.apxs.in \ + $(top_srcdir)/apache-2.0/Makefile.in \ + $(top_srcdir)/common/Makefile.in \ + $(top_srcdir)/common/config.h.in \ + $(top_srcdir)/common/jk_types.h.in \ + $(top_srcdir)/common/list.mk.in $(top_srcdir)/configure \ + $(top_srcdir)/jni/Makefile.in NEWS \ + scripts/build/unix/config.guess scripts/build/unix/config.sub \ + scripts/build/unix/install-sh scripts/build/unix/ltmain.sh \ + scripts/build/unix/missing +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/scripts/build/jk_common.m4 \ + $(top_srcdir)/../support/os_apache.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/common/config.h +CONFIG_CLEAN_FILES = apache-1.3/Makefile apache-1.3/Makefile.apxs \ + apache-2.0/Makefile apache-2.0/Makefile.apxs common/Makefile \ + common/list.mk common/jk_types.h jni/Makefile +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run aclocal-1.9 +AMDEP_FALSE = # +AMDEP_TRUE = +AMTAR = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run tar +APACHE20_OEXT = .c +APACHE_CONFIG_VARS = /bottlenecks/rubbos/app/apache2/build/config_vars.mk +APACHE_DIR = /bottlenecks/rubbos/app/apache2 +APXS = /bottlenecks/rubbos/app/apache2/bin/apxs +APXSCFLAGS = -g -O2 -pthread -DHAVE_APR -I/bottlenecks/rubbos/app/httpd-2.0.64/srclib/apr/include -I/bottlenecks/rubbos/app/httpd-2.0.64/srclib/apr-util/include -DHAVE_CONFIG_H -DHAVE_JNI +APXSCPPFLAGS = -D_REENTRANT -D_GNU_SOURCE +APXSLDFLAGS = +AR = ar +AUTOCONF = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run autoconf +AUTOHEADER = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run autoheader +AUTOMAKE = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run automake-1.9 +AWK = gawk +CC = gcc +CCDEPMODE = depmode=none +CFLAGS = -DHAVE_CONFIG_H -DHAVE_JNI +CP = /bin/cp +CPP = gcc -E +CPPFLAGS = +CXX = g++ +CXXCPP = g++ -E +CXXDEPMODE = depmode=none +CXXFLAGS = -g -O2 +CYGPATH_W = echo +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +ECHO = /bin/echo +ECHO_C = +ECHO_N = -n +ECHO_T = +EGREP = grep -E +EXEEXT = +F77 = +FFLAGS = +GREP = /bin/grep +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s +INSTALL_TYPE = install_dynamic +JAVA_HOME = /bottlenecks/rubbos/app/jdk1.6.0_27 +JK_JNI_WORKER = ${JK}jk_jni_worker${OEXT} +LDFLAGS = +LIBOBJS = +LIBS = +LIBTOOL = /bin/bash /bottlenecks/rubbos/app/apache2/build/libtool --silent +LIB_JK_TYPE = mod_jk.so +LN_S = ln -s +LTLIBOBJS = +MAKEINFO = ${SHELL} /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/missing --run makeinfo +MAKE_DYNAMIC_APACHE_FALSE = # +MAKE_DYNAMIC_APACHE_TRUE = +MKDIR = /bin/mkdir +OBJEXT = o +OS = linux +PACKAGE = mod_jk +PACKAGE_BUGREPORT = +PACKAGE_NAME = +PACKAGE_STRING = +PACKAGE_TARNAME = +PACKAGE_VERSION = +PATH_SEPARATOR = : +PERL = /usr/bin/perl +RANLIB = ranlib +RM = /bin/rm +SED = /bin/sed +SET_MAKE = +SHELL = /bin/bash +STRIP = strip +TEST = /usr/bin/test +VERSION = 1.2.32 +WEBSERVER = common jni apache-2.0 +ac_ct_AR = ar +ac_ct_CC = gcc +ac_ct_CXX = g++ +ac_ct_F77 = +ac_ct_RANLIB = ranlib +ac_ct_STRIP = strip +am__fastdepCC_FALSE = +am__fastdepCC_TRUE = # +am__fastdepCXX_FALSE = +am__fastdepCXX_TRUE = # +am__include = include +am__leading_dot = . +am__quote = +am__tar = ${AMTAR} chof - "$$tardir" +am__untar = ${AMTAR} xf - +apache_include = -I/bottlenecks/rubbos/app/apache2/include +bindir = ${exec_prefix}/bin +build = x86_64-unknown-linux-gnu +build_alias = +build_cpu = x86_64 +build_os = linux-gnu +build_vendor = unknown +datadir = ${prefix}/share +exec_prefix = ${prefix} +host = x86_64-unknown-linux-gnu +host_alias = +host_cpu = x86_64 +host_os = linux-gnu +host_vendor = unknown +includedir = ${prefix}/include +infodir = ${prefix}/info +install_sh = /bottlenecks/rubbos/app/tomcat-connectors-1.2.32-src/native/scripts/build/unix/install-sh +int32_t_fmt = #define JK_INT32_T_FMT "d" +int32_value = int +int64_t_fmt = #define JK_INT64_T_FMT "ld" +int64_value = long +libdir = ${exec_prefix}/lib +libexecdir = ${exec_prefix}/libexec +localstatedir = ${prefix}/var +mandir = ${prefix}/man +mkdir_p = mkdir -p -- +oldincludedir = /usr/include +pid_t_fmt = #define JK_PID_T_FMT "d" +prefix = /usr/local +program_transform_name = s,x,x, +pthread_t_fmt = #define JK_PTHREAD_T_FMT "lu" +pthread_t_value = long +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +sysconfdir = ${prefix}/etc +target = x86_64-unknown-linux-gnu +target_alias = +target_cpu = x86_64 +target_os = linux-gnu +target_vendor = unknown +uint32_t_fmt = #define JK_UINT32_T_FMT "u" +uint32_t_hex_fmt = #define JK_UINT32_T_HEX_FMT "x" +uint64_t_fmt = #define JK_UINT64_T_FMT "lu" +uint64_t_hex_fmt = #define JK_UINT64_T_HEX_FMT "lx" + +# +# Tell automake what it should do +AUTOMAKE_OPTIONS = foreign +MAINTAINERCLEANFILES = config.cache config.status config.log \ +config.nice Makefile.in configure common/config.h.in \ +common/config.h aclocal.m4 + +SUBDIRS = common jni apache-2.0 +all: all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +common/config.h: common/stamp-h1 + @if test ! -f $@; then \ + rm -f common/stamp-h1; \ + $(MAKE) common/stamp-h1; \ + else :; fi + +common/stamp-h1: $(top_srcdir)/common/config.h.in $(top_builddir)/config.status + @rm -f common/stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status common/config.h +$(top_srcdir)/common/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f common/stamp-h1 + touch $@ + +distclean-hdr: + -rm -f common/config.h common/stamp-h1 +apache-1.3/Makefile: $(top_builddir)/config.status $(top_srcdir)/apache-1.3/Makefile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +apache-1.3/Makefile.apxs: $(top_builddir)/config.status $(top_srcdir)/apache-1.3/Makefile.apxs.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +apache-2.0/Makefile: $(top_builddir)/config.status $(top_srcdir)/apache-2.0/Makefile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +apache-2.0/Makefile.apxs: $(top_builddir)/config.status $(top_srcdir)/apache-2.0/Makefile.apxs.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +common/Makefile: $(top_builddir)/config.status $(top_srcdir)/common/Makefile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +common/list.mk: $(top_builddir)/config.status $(top_srcdir)/common/list.mk.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +common/jk_types.h: $(top_builddir)/config.status $(top_srcdir)/common/jk_types.h.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +jni/Makefile: $(top_builddir)/config.status $(top_srcdir)/jni/Makefile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + $(mkdir_p) $(distdir)/../support $(distdir)/apache-1.3 $(distdir)/apache-2.0 $(distdir)/common $(distdir)/jni $(distdir)/scripts/build $(distdir)/scripts/build/unix + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-generic clean-libtool clean-recursive \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am uninstall-info-am + + +all: + target="all"; \ + list='$(SUBDIRS)'; \ + for i in $$list; do \ + echo "Making $$target in $$i"; \ + if test "$$i" != "."; then \ + (cd $$i && $(MAKE) $$target) || exit 1; \ + fi; \ + done; + +apidocs: common/*.h + ../../scandoc/scandoc.pl -i ../../scandoc/template.pl -p \ + ./docs/api/ -dproject="mod_jk Library" common/*.h common/*.c +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |