diff options
Diffstat (limited to 'rubbos/app/httpd-2.0.64/modules/proxy/proxy_ftp.c')
| -rw-r--r-- | rubbos/app/httpd-2.0.64/modules/proxy/proxy_ftp.c | 1936 |
1 files changed, 1936 insertions, 0 deletions
diff --git a/rubbos/app/httpd-2.0.64/modules/proxy/proxy_ftp.c b/rubbos/app/httpd-2.0.64/modules/proxy/proxy_ftp.c new file mode 100644 index 00000000..cbbf23c9 --- /dev/null +++ b/rubbos/app/httpd-2.0.64/modules/proxy/proxy_ftp.c @@ -0,0 +1,1936 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* FTP routines for Apache proxy */ + +#include "mod_proxy.h" +#if APR_HAVE_TIME_H +#include <time.h> +#endif + +#define AUTODETECT_PWD +/* Automatic timestamping (Last-Modified header) based on MDTM is used if: + * 1) the FTP server supports the MDTM command and + * 2) HAVE_TIMEGM (preferred) or HAVE_GMTOFF is available at compile time + */ +#define USE_MDTM + + +module AP_MODULE_DECLARE_DATA proxy_ftp_module; + +int ap_proxy_ftp_canon(request_rec *r, char *url); +int ap_proxy_ftp_handler(request_rec *r, proxy_server_conf *conf, + char *url, const char *proxyhost, + apr_port_t proxyport); +apr_status_t ap_proxy_send_dir_filter(ap_filter_t * f, + apr_bucket_brigade *bb); + + +/* + * Decodes a '%' escaped string, and returns the number of characters + */ +static int decodeenc(char *x) +{ + int i, j, ch; + + if (x[0] == '\0') + return 0; /* special case for no characters */ + for (i = 0, j = 0; x[i] != '\0'; i++, j++) { + /* decode it if not already done */ + ch = x[i]; + if (ch == '%' && apr_isxdigit(x[i + 1]) && apr_isxdigit(x[i + 2])) { + ch = ap_proxy_hex2c(&x[i + 1]); + i += 2; + } + x[j] = ch; + } + x[j] = '\0'; + return j; +} + +/* + * Escape the globbing characters in a path used as argument to + * the FTP commands (SIZE, CWD, RETR, MDTM, ...). + * ftpd assumes '\\' as a quoting character to escape special characters. + * Returns: escaped string + */ +#define FTP_GLOBBING_CHARS "*?[{~" +static char *ftp_escape_globbingchars(apr_pool_t *p, const char *path) +{ + char *ret = apr_palloc(p, 2*strlen(path)+sizeof("")); + char *d; + for (d = ret; *path; ++path) { + if (strchr(FTP_GLOBBING_CHARS, *path) != NULL) + *d++ = '\\'; + *d++ = *path; + } + *d = '\0'; + return ret; +} + +/* + * Check for globbing characters in a path used as argument to + * the FTP commands (SIZE, CWD, RETR, MDTM, ...). + * ftpd assumes '\\' as a quoting character to escape special characters. + * Returns: 0 (no globbing chars, or all globbing chars escaped), 1 (globbing chars) + */ +static int ftp_check_globbingchars(const char *path) +{ + for ( ; *path; ++path) { + if (*path == '\\') + ++path; + if (*path != '\0' && strchr(FTP_GLOBBING_CHARS, *path) != NULL) + return TRUE; + } + return FALSE; +} + +/* + * checks an encoded ftp string for bad characters, namely, CR, LF or + * non-ascii character + */ +static int ftp_check_string(const char *x) +{ + int i, ch = 0; +#if APR_CHARSET_EBCDIC + char buf[1]; +#endif + + for (i = 0; x[i] != '\0'; i++) { + ch = x[i]; + if (ch == '%' && apr_isxdigit(x[i + 1]) && apr_isxdigit(x[i + 2])) { + ch = ap_proxy_hex2c(&x[i + 1]); + i += 2; + } +#if !APR_CHARSET_EBCDIC + if (ch == '\015' || ch == '\012' || (ch & 0x80)) +#else /* APR_CHARSET_EBCDIC */ + if (ch == '\r' || ch == '\n') + return 0; + buf[0] = ch; + ap_xlate_proto_to_ascii(buf, 1); + if (buf[0] & 0x80) +#endif /* APR_CHARSET_EBCDIC */ + return 0; + } + return 1; +} + +/* + * Canonicalise ftp URLs. + */ +int ap_proxy_ftp_canon(request_rec *r, char *url) +{ + char *user, *password, *host, *path, *parms, *strp, sport[7]; + apr_pool_t *p = r->pool; + const char *err; + apr_port_t port, def_port; + + /* */ + if (strncasecmp(url, "ftp:", 4) == 0) { + url += 4; + } + else { + return DECLINED; + } + def_port = apr_uri_port_of_scheme("ftp"); + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: canonicalising URL %s", url); + + port = def_port; + err = ap_proxy_canon_netloc(p, &url, &user, &password, &host, &port); + if (err) + return HTTP_BAD_REQUEST; + if (user != NULL && !ftp_check_string(user)) + return HTTP_BAD_REQUEST; + if (password != NULL && !ftp_check_string(password)) + return HTTP_BAD_REQUEST; + + /* now parse path/parameters args, according to rfc1738 */ + /* + * N.B. if this isn't a true proxy request, then the URL path (but not + * query args) has already been decoded. This gives rise to the problem + * of a ; being decoded into the path. + */ + strp = strchr(url, ';'); + if (strp != NULL) { + *(strp++) = '\0'; + parms = ap_proxy_canonenc(p, strp, strlen(strp), enc_parm, + r->proxyreq); + if (parms == NULL) + return HTTP_BAD_REQUEST; + } + else + parms = ""; + + path = ap_proxy_canonenc(p, url, strlen(url), enc_path, r->proxyreq); + if (path == NULL) + return HTTP_BAD_REQUEST; + if (!ftp_check_string(path)) + return HTTP_BAD_REQUEST; + + if (r->proxyreq && r->args != NULL) { + if (strp != NULL) { + strp = ap_proxy_canonenc(p, r->args, strlen(r->args), enc_parm, 1); + if (strp == NULL) + return HTTP_BAD_REQUEST; + parms = apr_pstrcat(p, parms, "?", strp, NULL); + } + else { + strp = ap_proxy_canonenc(p, r->args, strlen(r->args), enc_fpath, 1); + if (strp == NULL) + return HTTP_BAD_REQUEST; + path = apr_pstrcat(p, path, "?", strp, NULL); + } + r->args = NULL; + } + +/* now, rebuild URL */ + + if (port != def_port) + apr_snprintf(sport, sizeof(sport), ":%d", port); + else + sport[0] = '\0'; + + if (ap_strchr_c(host, ':')) { /* if literal IPv6 address */ + host = apr_pstrcat(p, "[", host, "]", NULL); + } + r->filename = apr_pstrcat(p, "proxy:ftp://", (user != NULL) ? user : "", + (password != NULL) ? ":" : "", + (password != NULL) ? password : "", + (user != NULL) ? "@" : "", host, sport, "/", path, + (parms[0] != '\0') ? ";" : "", parms, NULL); + + return OK; +} + +/* we chop lines longer than 80 characters */ +#define MAX_LINE_LEN 80 + +/* + * Reads response lines, returns both the ftp status code and + * remembers the response message in the supplied buffer + */ +static int ftp_getrc_msg(conn_rec *ftp_ctrl, apr_bucket_brigade *bb, char *msgbuf, int msglen) +{ + int status; + char response[MAX_LINE_LEN]; + char buff[5]; + char *mb = msgbuf, *me = &msgbuf[msglen]; + apr_status_t rv; + int eos; + + if (APR_SUCCESS != (rv = ap_proxy_string_read(ftp_ctrl, bb, response, sizeof(response), &eos))) { + return -1; + } +/* + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, NULL, + "proxy: <FTP: %s", response); +*/ + if (!apr_isdigit(response[0]) || !apr_isdigit(response[1]) || + !apr_isdigit(response[2]) || (response[3] != ' ' && response[3] != '-')) + status = 0; + else + status = 100 * response[0] + 10 * response[1] + response[2] - 111 * '0'; + + mb = apr_cpystrn(mb, response + 4, me - mb); + + if (response[3] == '-') { + memcpy(buff, response, 3); + buff[3] = ' '; + do { + if (APR_SUCCESS != (rv = ap_proxy_string_read(ftp_ctrl, bb, response, sizeof(response), &eos))) { + return -1; + } + mb = apr_cpystrn(mb, response + (' ' == response[0] ? 1 : 4), me - mb); + } while (memcmp(response, buff, 4) != 0); + } + + return status; +} + +/* this is a filter that turns a raw ASCII directory listing into pretty HTML */ + +/* ideally, mod_proxy should simply send the raw directory list up the filter + * stack to mod_autoindex, which in theory should turn the raw ascii into + * pretty html along with all the bells and whistles it provides... + * + * all in good time...! :) + */ + +typedef struct { + apr_bucket_brigade *in; + char buffer[MAX_STRING_LEN]; + enum { + HEADER, BODY, FOOTER + } state; +} proxy_dir_ctx_t; + +/* fallback regex for ls -s1; ($0..$2) == 3 */ +#define LS_REG_PATTERN "^ *([0-9]+) +([^ ]+)$" +#define LS_REG_MATCH 3 + +apr_status_t ap_proxy_send_dir_filter(ap_filter_t *f, apr_bucket_brigade *in) +{ + request_rec *r = f->r; + conn_rec *c = r->connection; + apr_pool_t *p = r->pool; + apr_bucket_brigade *out = apr_brigade_create(p, c->bucket_alloc); + apr_status_t rv; + + register int n; + char *dir, *path, *reldir, *site, *str, *type; + + const char *pwd = apr_table_get(r->notes, "Directory-PWD"); + const char *readme = apr_table_get(r->notes, "Directory-README"); + + proxy_dir_ctx_t *ctx = f->ctx; + + if (!ctx) { + f->ctx = ctx = apr_pcalloc(p, sizeof(*ctx)); + ctx->in = apr_brigade_create(p, c->bucket_alloc); + ctx->buffer[0] = 0; + ctx->state = HEADER; + } + + /* combine the stored and the new */ + APR_BRIGADE_CONCAT(ctx->in, in); + + if (HEADER == ctx->state) { + + /* basedir is either "", or "/%2f" for the "squid %2f hack" */ + const char *basedir = ""; /* By default, path is relative to the $HOME dir */ + char *wildcard = NULL; + + /* Save "scheme://site" prefix without password */ + site = apr_uri_unparse(p, &f->r->parsed_uri, APR_URI_UNP_OMITPASSWORD | APR_URI_UNP_OMITPATHINFO); + /* ... and path without query args */ + path = apr_uri_unparse(p, &f->r->parsed_uri, APR_URI_UNP_OMITSITEPART | APR_URI_UNP_OMITQUERY); + + /* If path began with /%2f, change the basedir */ + if (strncasecmp(path, "/%2f", 4) == 0) { + basedir = "/%2f"; + } + + /* Strip off a type qualifier. It is ignored for dir listings */ + if ((type = strstr(path, ";type=")) != NULL) + *type++ = '\0'; + + (void)decodeenc(path); + + while (path[1] == '/') /* collapse multiple leading slashes to one */ + ++path; + + reldir = strrchr(path, '/'); + if (reldir != NULL && ftp_check_globbingchars(reldir)) { + wildcard = &reldir[1]; + reldir[0] = '\0'; /* strip off the wildcard suffix */ + } + + /* Copy path, strip (all except the last) trailing slashes */ + /* (the trailing slash is needed for the dir component loop below) */ + path = dir = apr_pstrcat(p, path, "/", NULL); + for (n = strlen(path); n > 1 && path[n - 1] == '/' && path[n - 2] == '/'; --n) + path[n - 1] = '\0'; + + /* Add a link to the root directory (if %2f hack was used) */ + str = (basedir[0] != '\0') ? "<a href=\"/%2f/\">%2f</a>/" : ""; + + /* print "ftp://host/" */ + str = apr_psprintf(p, DOCTYPE_HTML_3_2 + "<html>\n <head>\n <title>%s%s%s</title>\n" + " </head>\n" + " <body>\n <h2>Directory of " + "<a href=\"/\">%s</a>/%s", + site, basedir, ap_escape_html(p, path), + site, str); + + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, strlen(str), + p, c->bucket_alloc)); + + for (dir = path+1; (dir = strchr(dir, '/')) != NULL; ) + { + *dir = '\0'; + if ((reldir = strrchr(path+1, '/'))==NULL) { + reldir = path+1; + } + else + ++reldir; + /* print "path/" component */ + str = apr_psprintf(p, "<a href=\"%s%s/\">%s</a>/", basedir, + ap_escape_uri(p, path), + ap_escape_html(p, reldir)); + *dir = '/'; + while (*dir == '/') + ++dir; + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, + strlen(str), p, + c->bucket_alloc)); + } + if (wildcard != NULL) { + wildcard = ap_escape_html(p, wildcard); + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(wildcard, + strlen(wildcard), p, + c->bucket_alloc)); + } + + /* If the caller has determined the current directory, and it differs */ + /* from what the client requested, then show the real name */ + if (pwd == NULL || strncmp(pwd, path, strlen(pwd)) == 0) { + str = apr_psprintf(p, "</h2>\n\n <hr />\n\n<pre>"); + } + else { + str = apr_psprintf(p, "</h2>\n\n(%s)\n\n <hr />\n\n<pre>", + ap_escape_html(p, pwd)); + } + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, strlen(str), + p, c->bucket_alloc)); + + /* print README */ + if (readme) { + str = apr_psprintf(p, "%s\n</pre>\n\n<hr />\n\n<pre>\n", + ap_escape_html(p, readme)); + + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, + strlen(str), p, + c->bucket_alloc)); + } + + /* make sure page intro gets sent out */ + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_flush_create(c->bucket_alloc)); + if (APR_SUCCESS != (rv = ap_pass_brigade(f->next, out))) { + return rv; + } + apr_brigade_cleanup(out); + + ctx->state = BODY; + } + + /* loop through each line of directory */ + while (BODY == ctx->state) { + char *filename; + int found = 0; + int eos = 0; + + regex_t *re = NULL; + regmatch_t re_result[LS_REG_MATCH]; + + /* Compile the output format of "ls -s1" as a fallback for non-unix ftp listings */ + re = ap_pregcomp(p, LS_REG_PATTERN, REG_EXTENDED); + ap_assert(re != NULL); + + /* get a complete line */ + /* if the buffer overruns - throw data away */ + while (!found && !APR_BRIGADE_EMPTY(ctx->in)) { + char *pos, *response; + apr_size_t len, max; + apr_bucket *e; + + e = APR_BRIGADE_FIRST(ctx->in); + if (APR_BUCKET_IS_EOS(e)) { + eos = 1; + break; + } + if (APR_SUCCESS != (rv = apr_bucket_read(e, (const char **)&response, &len, APR_BLOCK_READ))) { + return rv; + } + pos = memchr(response, APR_ASCII_LF, len); + if (pos != NULL) { + if ((response + len) != (pos + 1)) { + len = pos - response + 1; + apr_bucket_split(e, pos - response + 1); + } + found = 1; + } + max = sizeof(ctx->buffer) - strlen(ctx->buffer) - 1; + if (len > max) { + len = max; + } + + /* len+1 to leave space for the trailing nil char */ + apr_cpystrn(ctx->buffer+strlen(ctx->buffer), response, len+1); + + APR_BUCKET_REMOVE(e); + apr_bucket_destroy(e); + } + + /* EOS? jump to footer */ + if (eos) { + ctx->state = FOOTER; + break; + } + + /* not complete? leave and try get some more */ + if (!found) { + return APR_SUCCESS; + } + + { + apr_size_t n = strlen(ctx->buffer); + if (ctx->buffer[n-1] == CRLF[1]) /* strip trailing '\n' */ + ctx->buffer[--n] = '\0'; + if (ctx->buffer[n-1] == CRLF[0]) /* strip trailing '\r' if present */ + ctx->buffer[--n] = '\0'; + } + + /* a symlink? */ + if (ctx->buffer[0] == 'l' && (filename = strstr(ctx->buffer, " -> ")) != NULL) { + char *link_ptr = filename; + + do { + filename--; + } while (filename[0] != ' ' && filename > ctx->buffer); + if (filename > ctx->buffer) + *(filename++) = '\0'; + *(link_ptr++) = '\0'; + str = apr_psprintf(p, "%s <a href=\"%s\">%s %s</a>\n", + ap_escape_html(p, ctx->buffer), + ap_escape_uri(p, filename), + ap_escape_html(p, filename), + ap_escape_html(p, link_ptr)); + } + + /* a directory/file? */ + else if (ctx->buffer[0] == 'd' || ctx->buffer[0] == '-' || ctx->buffer[0] == 'l' || apr_isdigit(ctx->buffer[0])) { + int searchidx = 0; + char *searchptr = NULL; + int firstfile = 1; + if (apr_isdigit(ctx->buffer[0])) { /* handle DOS dir */ + searchptr = strchr(ctx->buffer, '<'); + if (searchptr != NULL) + *searchptr = '['; + searchptr = strchr(ctx->buffer, '>'); + if (searchptr != NULL) + *searchptr = ']'; + } + + filename = strrchr(ctx->buffer, ' '); + *(filename++) = '\0'; + + /* handle filenames with spaces in 'em */ + if (!strcmp(filename, ".") || !strcmp(filename, "..") || firstfile) { + firstfile = 0; + searchidx = filename - ctx->buffer; + } + else if (searchidx != 0 && ctx->buffer[searchidx] != 0) { + *(--filename) = ' '; + ctx->buffer[searchidx - 1] = '\0'; + filename = &ctx->buffer[searchidx]; + } + + /* Append a slash to the HREF link for directories */ + if (!strcmp(filename, ".") || !strcmp(filename, "..") || ctx->buffer[0] == 'd') { + str = apr_psprintf(p, "%s <a href=\"%s/\">%s</a>\n", + ap_escape_html(p, ctx->buffer), + ap_escape_uri(p, filename), + ap_escape_html(p, filename)); + } + else { + str = apr_psprintf(p, "%s <a href=\"%s\">%s</a>\n", + ap_escape_html(p, ctx->buffer), + ap_escape_uri(p, filename), + ap_escape_html(p, filename)); + } + } + /* Try a fallback for listings in the format of "ls -s1" */ + else if (0 == ap_regexec(re, ctx->buffer, LS_REG_MATCH, re_result, 0)) { + + filename = apr_pstrndup(p, &ctx->buffer[re_result[2].rm_so], re_result[2].rm_eo - re_result[2].rm_so); + + str = apr_pstrcat(p, ap_escape_html(p, apr_pstrndup(p, ctx->buffer, re_result[2].rm_so)), + "<a href=\"", ap_escape_uri(p, filename), "\">", + ap_escape_html(p, filename), "</a>\n", NULL); + } + else { + strcat(ctx->buffer, "\n"); /* re-append the newline */ + str = ap_escape_html(p, ctx->buffer); + } + + /* erase buffer for next time around */ + ctx->buffer[0] = 0; + + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, strlen(str), p, + c->bucket_alloc)); + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_flush_create(c->bucket_alloc)); + if (APR_SUCCESS != (rv = ap_pass_brigade(f->next, out))) { + return rv; + } + apr_brigade_cleanup(out); + + } + + if (FOOTER == ctx->state) { + str = apr_psprintf(p, "</pre>\n\n <hr />\n\n %s\n\n </body>\n</html>\n", ap_psignature("", r)); + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_pool_create(str, strlen(str), p, + c->bucket_alloc)); + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_flush_create(c->bucket_alloc)); + APR_BRIGADE_INSERT_TAIL(out, apr_bucket_eos_create(c->bucket_alloc)); + if (APR_SUCCESS != (rv = ap_pass_brigade(f->next, out))) { + return rv; + } + apr_brigade_destroy(out); + } + + return APR_SUCCESS; +} + +/* Parse EPSV reply and return port, or zero on error. */ +static apr_port_t parse_epsv_reply(const char *reply) +{ + const char *p; + char *ep; + long port; + + /* Reply syntax per RFC 2428: "229 blah blah (|||port|)" where '|' + * can be any character in ASCII from 33-126, obscurely. Verify + * the syntax. */ + p = ap_strchr_c(reply, '('); + if (p == NULL || !p[1] || p[1] != p[2] || p[1] != p[3] + || p[4] == p[1]) { + return 0; + } + + errno = 0; + port = strtol(p + 4, &ep, 10); + if (errno || port < 1 || port > 65535 || ep[0] != p[1] || ep[1] != ')') { + return 0; + } + + return (apr_port_t)port; +} + +/* + * Generic "send FTP command to server" routine, using the control socket. + * Returns the FTP returncode (3 digit code) + * Allows for tracing the FTP protocol (in LogLevel debug) + */ +static int +proxy_ftp_command(const char *cmd, request_rec *r, conn_rec *ftp_ctrl, + apr_bucket_brigade *bb, char **pmessage) +{ + char *crlf; + int rc; + char message[HUGE_STRING_LEN]; + + /* If cmd == NULL, we retrieve the next ftp response line */ + if (cmd != NULL) { + conn_rec *c = r->connection; + APR_BRIGADE_INSERT_TAIL(bb, apr_bucket_pool_create(cmd, strlen(cmd), r->pool, c->bucket_alloc)); + APR_BRIGADE_INSERT_TAIL(bb, apr_bucket_flush_create(c->bucket_alloc)); + ap_pass_brigade(ftp_ctrl->output_filters, bb); + + /* strip off the CRLF for logging */ + apr_cpystrn(message, cmd, sizeof(message)); + if ((crlf = strchr(message, '\r')) != NULL || + (crlf = strchr(message, '\n')) != NULL) + *crlf = '\0'; + if (strncmp(message,"PASS ", 5) == 0) + strcpy(&message[5], "****"); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy:>FTP: %s", message); + } + + rc = ftp_getrc_msg(ftp_ctrl, bb, message, sizeof message); + if (rc == -1 || rc == 421) + strcpy(message,"<unable to read result>"); + if ((crlf = strchr(message, '\r')) != NULL || + (crlf = strchr(message, '\n')) != NULL) + *crlf = '\0'; + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy:<FTP: %3.3u %s", rc, message); + + if (pmessage != NULL) + *pmessage = apr_pstrdup(r->pool, message); + + return rc; +} + +/* Set ftp server to TYPE {A,I,E} before transfer of a directory or file */ +static int ftp_set_TYPE(char xfer_type, request_rec *r, conn_rec *ftp_ctrl, + apr_bucket_brigade *bb, char **pmessage) +{ + char old_type[2] = { 'A', '\0' }; /* After logon, mode is ASCII */ + int ret = HTTP_OK; + int rc; + + /* set desired type */ + old_type[0] = xfer_type; + + rc = proxy_ftp_command(apr_pstrcat(r->pool, "TYPE ", old_type, CRLF, NULL), + r, ftp_ctrl, bb, pmessage); +/* responses: 200, 421, 500, 501, 504, 530 */ + /* 200 Command okay. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 504 Command not implemented for that parameter. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + ret = ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + else if (rc != 200 && rc != 504) { + ret = ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Unable to set transfer type"); + } +/* Allow not implemented */ + else if (rc == 504) + /* ignore it silently */; + + return ret; +} + + +/* Return the current directory which we have selected on the FTP server, or NULL */ +static char *ftp_get_PWD(request_rec *r, conn_rec *ftp_ctrl, apr_bucket_brigade *bb) +{ + char *cwd = NULL; + char *ftpmessage = NULL; + + /* responses: 257, 500, 501, 502, 421, 550 */ + /* 257 "<directory-name>" <commentary> */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 550 Requested action not taken. */ + switch (proxy_ftp_command("PWD" CRLF, r, ftp_ctrl, bb, &ftpmessage)) { + case -1: + case 421: + case 550: + ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Failed to read PWD on ftp server"); + break; + + case 257: { + const char *dirp = ftpmessage; + cwd = ap_getword_conf(r->pool, &dirp); + } + } + return cwd; +} + + +/* Common routine for failed authorization (i.e., missing or wrong password) + * to an ftp service. This causes most browsers to retry the request + * with username and password (which was presumably queried from the user) + * supplied in the Authorization: header. + * Note that we "invent" a realm name which consists of the + * ftp://user@host part of the reqest (sans password -if supplied but invalid-) + */ +static int ftp_unauthorized(request_rec *r, int log_it) +{ + r->proxyreq = PROXYREQ_NONE; + /* + * Log failed requests if they supplied a password (log username/password + * guessing attempts) + */ + if (log_it) + ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, + "proxy: missing or failed auth to %s", + apr_uri_unparse(r->pool, + &r->parsed_uri, APR_URI_UNP_OMITPATHINFO)); + + apr_table_setn(r->err_headers_out, "WWW-Authenticate", + apr_pstrcat(r->pool, "Basic realm=\"", + apr_uri_unparse(r->pool, &r->parsed_uri, + APR_URI_UNP_OMITPASSWORD | APR_URI_UNP_OMITPATHINFO), + "\"", NULL)); + + return HTTP_UNAUTHORIZED; +} + + +/* + * Handles direct access of ftp:// URLs + * Original (Non-PASV) version from + * Troy Morrison <spiffnet@zoom.com> + * PASV added by Chuck + * Filters by [Graham Leggett <minfrin@sharp.fm>] + */ +int ap_proxy_ftp_handler(request_rec *r, proxy_server_conf *conf, + char *url, const char *proxyhost, + apr_port_t proxyport) +{ + apr_pool_t *p = r->pool; + conn_rec *c = r->connection; + proxy_conn_rec *backend; + apr_socket_t *sock, *local_sock, *data_sock = NULL; + apr_sockaddr_t *connect_addr; + apr_status_t rv; + conn_rec *origin, *data = NULL; + int err; + apr_bucket_brigade *bb = apr_brigade_create(p, c->bucket_alloc); + char *buf, *connectname; + apr_port_t connectport; + char buffer[MAX_STRING_LEN]; + char *ftpmessage = NULL; + char *path, *strp, *type_suffix, *cwd = NULL; + apr_uri_t uri; + char *user = NULL; +/* char *account = NULL; how to supply an account in a URL? */ + const char *password = NULL; + int len, rc; + int one = 1; + char *size = NULL; + apr_socket_t *origin_sock = NULL; + char xfer_type = 'A'; /* after ftp login, the default is ASCII */ + int dirlisting = 0; +#if defined(USE_MDTM) && (defined(HAVE_TIMEGM) || defined(HAVE_GMTOFF)) + apr_time_t mtime = 0L; +#endif + + /* stuff for PASV mode */ + int connect = 0, use_port = 0; + char dates[APR_RFC822_DATE_LEN]; + + /* is this for us? */ + if (proxyhost) { + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: declining URL %s - proxyhost %s specified:", url, proxyhost); + return DECLINED; /* proxy connections are via HTTP */ + } + if (strncasecmp(url, "ftp:", 4)) { + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: declining URL %s - not ftp:", url); + return DECLINED; /* only interested in FTP */ + } + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: serving URL %s", url); + + /* create space for state information */ + backend = (proxy_conn_rec *) ap_get_module_config(c->conn_config, &proxy_ftp_module); + if (!backend) { + backend = apr_pcalloc(c->pool, sizeof(proxy_conn_rec)); + backend->connection = NULL; + backend->hostname = NULL; + backend->port = 0; + ap_set_module_config(c->conn_config, &proxy_ftp_module, backend); + } + if (backend->connection) + origin_sock = ap_get_module_config(backend->connection->conn_config, &core_module); + + + /* + * I: Who Do I Connect To? ----------------------- + * + * Break up the URL to determine the host to connect to + */ + + /* we only support GET and HEAD */ + if (r->method_number != M_GET) + return HTTP_NOT_IMPLEMENTED; + + /* We break the URL into host, port, path-search */ + if (r->parsed_uri.hostname == NULL) { + if (APR_SUCCESS != apr_uri_parse(p, url, &uri)) { + return ap_proxyerror(r, HTTP_BAD_REQUEST, + apr_psprintf(p, "URI cannot be parsed: %s", url)); + } + connectname = uri.hostname; + connectport = uri.port; + path = apr_pstrdup(p, uri.path); + } + else { + connectname = r->parsed_uri.hostname; + connectport = r->parsed_uri.port; + path = apr_pstrdup(p, r->parsed_uri.path); + } + if (connectport == 0) { + connectport = apr_uri_port_of_scheme("ftp"); + } + path = (path != NULL && path[0] != '\0') ? &path[1] : ""; + + type_suffix = strchr(path, ';'); + if (type_suffix != NULL) + *(type_suffix++) = '\0'; + + if (type_suffix != NULL && strncmp(type_suffix, "type=", 5) == 0 + && apr_isalpha(type_suffix[5])) { + /* "type=d" forces a dir listing. + * The other types (i|a|e) are directly used for the ftp TYPE command + */ + if ( ! (dirlisting = (apr_tolower(type_suffix[5]) == 'd'))) + xfer_type = apr_toupper(type_suffix[5]); + + /* Check valid types, rather than ignoring invalid types silently: */ + if (strchr("AEI", xfer_type) == NULL) + return ap_proxyerror(r, HTTP_BAD_REQUEST, apr_pstrcat(r->pool, + "ftp proxy supports only types 'a', 'i', or 'e': \"", + type_suffix, "\" is invalid.", NULL)); + } + else { + /* make binary transfers the default */ + xfer_type = 'I'; + } + + + /* + * The "Authorization:" header must be checked first. We allow the user + * to "override" the URL-coded user [ & password ] in the Browsers' + * User&Password Dialog. NOTE that this is only marginally more secure + * than having the password travel in plain as part of the URL, because + * Basic Auth simply uuencodes the plain text password. But chances are + * still smaller that the URL is logged regularly. + */ + if ((password = apr_table_get(r->headers_in, "Authorization")) != NULL + && strcasecmp(ap_getword(r->pool, &password, ' '), "Basic") == 0 + && (password = ap_pbase64decode(r->pool, password))[0] != ':') { + /* Check the decoded string for special characters. */ + if (!ftp_check_string(password)) { + return ap_proxyerror(r, HTTP_BAD_REQUEST, + "user credentials contained invalid character"); + } + /* + * Note that this allocation has to be made from r->connection->pool + * because it has the lifetime of the connection. The other + * allocations are temporary and can be tossed away any time. + */ + user = ap_getword_nulls(r->connection->pool, &password, ':'); + r->ap_auth_type = "Basic"; + r->user = r->parsed_uri.user = user; + } + else if ((user = r->parsed_uri.user) != NULL) { + user = apr_pstrdup(p, user); + decodeenc(user); + if ((password = r->parsed_uri.password) != NULL) { + char *tmp = apr_pstrdup(p, password); + decodeenc(tmp); + password = tmp; + } + } + else { + user = "anonymous"; + password = "apache-proxy@"; + } + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: connecting %s to %s:%d", url, connectname, connectport); + + /* do a DNS lookup for the destination host */ + err = apr_sockaddr_info_get(&connect_addr, connectname, APR_UNSPEC, connectport, 0, p); + + /* check if ProxyBlock directive on this host */ + if (OK != ap_proxy_checkproxyblock(r, conf, connect_addr)) { + return ap_proxyerror(r, HTTP_FORBIDDEN, + "Connect to remote machine blocked"); + } + + + /* + * II: Make the Connection ----------------------- + * + * We have determined who to connect to. Now make the connection. + */ + + /* + * get all the possible IP addresses for the destname and loop through + * them until we get a successful connection + */ + if (APR_SUCCESS != err) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, apr_pstrcat(p, + "DNS lookup failure for: ", + connectname, NULL)); + } + + /* + * At this point we have a list of one or more IP addresses of the + * machine to connect to. If configured, reorder this list so that the + * "best candidate" is first try. "best candidate" could mean the least + * loaded server, the fastest responding server, whatever. + * + * For now we do nothing, ie we get DNS round robin. XXX FIXME + */ + + + /* try each IP address until we connect successfully */ + { + int failed = 1; + while (connect_addr) { + + if ((rv = apr_socket_create(&sock, connect_addr->family, SOCK_STREAM, r->pool)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error creating socket"); + connect_addr = connect_addr->next; + continue; + } + +#if !defined(TPF) && !defined(BEOS) + if (conf->recv_buffer_size > 0 + && (rv = apr_socket_opt_set(sock, APR_SO_RCVBUF, + conf->recv_buffer_size))) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "apr_socket_opt_set(APR_SO_RCVBUF): Failed to set ProxyReceiveBufferSize, using default"); + } +#endif + + if (APR_SUCCESS != (rv = apr_socket_opt_set(sock, APR_SO_REUSEADDR, one))) { + apr_socket_close(sock); +#ifndef _OSD_POSIX /* BS2000 has this option "always on" */ + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error setting reuseaddr option: apr_socket_opt_set(APR_SO_REUSEADDR)"); + connect_addr = connect_addr->next; + continue; +#endif /* _OSD_POSIX */ + } + + /* Set a timeout on the socket */ + if (conf->timeout_set == 1) { + apr_socket_timeout_set(sock, conf->timeout); + } + else { + apr_socket_timeout_set(sock, r->server->timeout); + } + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: fam %d socket created, trying to connect to %pI (%s)...", + connect_addr->family, connect_addr, connectname); + + /* make the connection out of the socket */ + rv = apr_connect(sock, connect_addr); + + /* if an error occurred, loop round and try again */ + if (rv != APR_SUCCESS) { + apr_socket_close(sock); + ap_log_error(APLOG_MARK, APLOG_ERR, rv, r->server, + "proxy: FTP: attempt to connect to %pI (%s) failed", connect_addr, connectname); + connect_addr = connect_addr->next; + continue; + } + + /* if we get here, all is well */ + failed = 0; + break; + } + + /* handle a permanent error from the above loop */ + if (failed) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, apr_psprintf(r->pool, + "Could not connect to remote machine: %s port %d", + connectname, connectport)); + } + } + + /* the socket is now open, create a new connection */ + origin = ap_run_create_connection(p, r->server, sock, r->connection->id, + r->connection->sbh, c->bucket_alloc); + if (!origin) { + /* + * the peer reset the connection already; ap_run_create_connection() closed + * the socket + */ + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: an error occurred creating a new connection to %pI (%s)", connect_addr, connectname); + return HTTP_INTERNAL_SERVER_ERROR; + } + + /* if a keepalive connection is floating around, close it first! */ + /* we might support ftp keepalives later, but not now... */ + if (backend->connection) { + apr_socket_close(origin_sock); + backend->connection = NULL; + origin_sock = NULL; + } + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: control connection complete"); + + + /* + * III: Send Control Request ------------------------- + * + * Log into the ftp server, send the username & password, change to the + * correct directory... + */ + + /* set up the connection filters */ + rc = ap_run_pre_connection(origin, sock); + if (rc != OK && rc != DONE) { + origin->aborted = 1; + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: pre_connection setup failed (%d)", + rc); + return rc; + } + + /* possible results: */ + /* 120 Service ready in nnn minutes. */ + /* 220 Service ready for new user. */ + /* 421 Service not available, closing control connection. */ + rc = proxy_ftp_command(NULL, r, origin, bb, &ftpmessage); + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, "Error reading from remote server"); + } + if (rc == 120) { + /* + * RFC2616 states: 14.37 Retry-After + * + * The Retry-After response-header field can be used with a 503 (Service + * Unavailable) response to indicate how long the service is expected + * to be unavailable to the requesting client. [...] The value of + * this field can be either an HTTP-date or an integer number of + * seconds (in decimal) after the time of the response. Retry-After + * = "Retry-After" ":" ( HTTP-date | delta-seconds ) + */ + char *secs_str = ftpmessage; + time_t secs; + + /* Look for a number, preceded by whitespace */ + while (*secs_str) + if ((secs_str==ftpmessage || apr_isspace(secs_str[-1])) && + apr_isdigit(secs_str[0])) + break; + if (*secs_str != '\0') { + secs = atol(secs_str); + apr_table_add(r->headers_out, "Retry-After", + apr_psprintf(p, "%lu", (unsigned long)(60 * secs))); + } + return ap_proxyerror(r, HTTP_SERVICE_UNAVAILABLE, ftpmessage); + } + if (rc != 220) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + + rc = proxy_ftp_command(apr_pstrcat(p, "USER ", user, CRLF, NULL), + r, origin, bb, &ftpmessage); + /* possible results; 230, 331, 332, 421, 500, 501, 530 */ + /* states: 1 - error, 2 - success; 3 - send password, 4,5 fail */ + /* 230 User logged in, proceed. */ + /* 331 User name okay, need password. */ + /* 332 Need account for login. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* (This may include errors such as command line too long.) */ + /* 501 Syntax error in parameters or arguments. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, "Error reading from remote server"); + } + if (rc == 530) { + return ftp_unauthorized(r, 1); /* log it: user name guessing + * attempt? */ + } + if (rc != 230 && rc != 331) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + + if (rc == 331) { /* send password */ + if (password == NULL) { + return ftp_unauthorized(r, 0); + } + + rc = proxy_ftp_command(apr_pstrcat(p, "PASS ", password, CRLF, NULL), + r, origin, bb, &ftpmessage); + /* possible results 202, 230, 332, 421, 500, 501, 503, 530 */ + /* 230 User logged in, proceed. */ + /* 332 Need account for login. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 503 Bad sequence of commands. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc == 332) { + return ap_proxyerror(r, HTTP_UNAUTHORIZED, + apr_pstrcat(p, "Need account for login: ", ftpmessage, NULL)); + } + /* @@@ questionable -- we might as well return a 403 Forbidden here */ + if (rc == 530) { + return ftp_unauthorized(r, 1); /* log it: passwd guessing + * attempt? */ + } + if (rc != 230 && rc != 202) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + } + apr_table_set(r->notes, "Directory-README", ftpmessage); + + + /* Special handling for leading "%2f": this enforces a "cwd /" + * out of the $HOME directory which was the starting point after login + */ + if (strncasecmp(path, "%2f", 3) == 0) { + path += 3; + while (*path == '/') /* skip leading '/' (after root %2f) */ + ++path; + + rc = proxy_ftp_command("CWD /" CRLF, r, origin, bb, &ftpmessage); + if (rc == -1 || rc == 421) + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + + /* + * set the directory (walk directory component by component): this is + * what we must do if we don't know the OS type of the remote machine + */ + for (;;) { + strp = strchr(path, '/'); + if (strp == NULL) + break; + *strp = '\0'; + + len = decodeenc(path); /* Note! This decodes a %2f -> "/" */ + + if (strchr(path, '/')) { /* are there now any '/' characters? */ + return ap_proxyerror(r, HTTP_BAD_REQUEST, + "Use of /%2f is only allowed at the base directory"); + } + + /* NOTE: FTP servers do globbing on the path. + * So we need to escape the URI metacharacters. + * We use a special glob-escaping routine to escape globbing chars. + * We could also have extended gen_test_char.c with a special T_ESCAPE_FTP_PATH + */ + rc = proxy_ftp_command(apr_pstrcat(p, "CWD ", + ftp_escape_globbingchars(p, path), CRLF, NULL), + r, origin, bb, &ftpmessage); + *strp = '/'; + /* responses: 250, 421, 500, 501, 502, 530, 550 */ + /* 250 Requested file action okay, completed. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + /* 550 Requested action not taken. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc == 550) { + return ap_proxyerror(r, HTTP_NOT_FOUND, ftpmessage); + } + if (rc != 250) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + + path = strp + 1; + } + + /* + * IV: Make Data Connection? ------------------------- + * + * Try EPSV, if that fails... try PASV, if that fails... try PORT. + */ +/* this temporarily switches off EPSV/PASV */ +/*goto bypass;*/ + + /* set up data connection - EPSV */ + { + apr_sockaddr_t *data_addr; + char *data_ip; + apr_port_t data_port; + + /* + * The EPSV command replaces PASV where both IPV4 and IPV6 is + * supported. Only the port is returned, the IP address is always the + * same as that on the control connection. Example: Entering Extended + * Passive Mode (|||6446|) + */ + rc = proxy_ftp_command("EPSV" CRLF, + r, origin, bb, &ftpmessage); + /* possible results: 227, 421, 500, 501, 502, 530 */ + /* 227 Entering Passive Mode (h1,h2,h3,h4,p1,p2). */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc != 229 && rc != 500 && rc != 501 && rc != 502) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + else if (rc == 229) { + /* Parse the port out of the EPSV reply. */ + data_port = parse_epsv_reply(ftpmessage); + + if (data_port) { + apr_sockaddr_t *epsv_addr; + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: EPSV contacting remote host on port %d", + data_port); + + if ((rv = apr_socket_create(&data_sock, connect_addr->family, SOCK_STREAM, r->pool)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error creating EPSV socket"); + return HTTP_INTERNAL_SERVER_ERROR; + } + +#if !defined (TPF) && !defined(BEOS) + if (conf->recv_buffer_size > 0 + && (rv = apr_socket_opt_set(data_sock, APR_SO_RCVBUF, + conf->recv_buffer_size))) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: apr_socket_opt_set(SO_RCVBUF): Failed to set ProxyReceiveBufferSize, using default"); + } +#endif + + /* make the connection */ + apr_socket_addr_get(&data_addr, APR_REMOTE, sock); + apr_sockaddr_ip_get(&data_ip, data_addr); + apr_sockaddr_info_get(&epsv_addr, data_ip, connect_addr->family, data_port, 0, p); + rv = apr_connect(data_sock, epsv_addr); + if (rv != APR_SUCCESS) { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, r->server, + "proxy: FTP: EPSV attempt to connect to %pI failed - Firewall/NAT?", epsv_addr); + return ap_proxyerror(r, HTTP_BAD_GATEWAY, apr_psprintf(r->pool, + "EPSV attempt to connect to %pI failed - firewall/NAT?", epsv_addr)); + } + else { + connect = 1; + } + } + } + } + + /* set up data connection - PASV */ + if (!connect) { + rc = proxy_ftp_command("PASV" CRLF, + r, origin, bb, &ftpmessage); + /* possible results: 227, 421, 500, 501, 502, 530 */ + /* 227 Entering Passive Mode (h1,h2,h3,h4,p1,p2). */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc != 227 && rc != 502) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + else if (rc == 227) { + unsigned int h0, h1, h2, h3, p0, p1; + char *pstr; + char *tok_cntx; + +/* FIXME: Check PASV against RFC1123 */ + + pstr = ftpmessage; + pstr = apr_strtok(pstr, " ", &tok_cntx); /* separate result code */ + if (pstr != NULL) { + if (*(pstr + strlen(pstr) + 1) == '=') { + pstr += strlen(pstr) + 2; + } + else { + pstr = apr_strtok(NULL, "(", &tok_cntx); /* separate address & + * port params */ + if (pstr != NULL) + pstr = apr_strtok(NULL, ")", &tok_cntx); + } + } + +/* FIXME: Only supports IPV4 - fix in RFC2428 */ + + if (pstr != NULL && (sscanf(pstr, + "%d,%d,%d,%d,%d,%d", &h3, &h2, &h1, &h0, &p1, &p0) == 6)) { + + apr_sockaddr_t *pasv_addr; + apr_port_t pasvport = (p1 << 8) + p0; + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: PASV contacting host %d.%d.%d.%d:%d", + h3, h2, h1, h0, pasvport); + + if ((rv = apr_socket_create(&data_sock, connect_addr->family, SOCK_STREAM, r->pool)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: error creating PASV socket"); + return HTTP_INTERNAL_SERVER_ERROR; + } + +#if !defined (TPF) && !defined(BEOS) + if (conf->recv_buffer_size > 0 + && (rv = apr_socket_opt_set(data_sock, APR_SO_RCVBUF, + conf->recv_buffer_size))) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: apr_socket_opt_set(SO_RCVBUF): Failed to set ProxyReceiveBufferSize, using default"); + } +#endif + + /* make the connection */ + apr_sockaddr_info_get(&pasv_addr, apr_psprintf(p, "%d.%d.%d.%d", h3, h2, h1, h0), connect_addr->family, pasvport, 0, p); + rv = apr_connect(data_sock, pasv_addr); + if (rv != APR_SUCCESS) { + ap_log_error(APLOG_MARK, APLOG_ERR, rv, r->server, + "proxy: FTP: PASV attempt to connect to %pI failed - Firewall/NAT?", pasv_addr); + return ap_proxyerror(r, HTTP_BAD_GATEWAY, apr_psprintf(r->pool, + "PASV attempt to connect to %pI failed - firewall/NAT?", pasv_addr)); + } + else { + connect = 1; + } + } + } + } +/*bypass:*/ + + /* set up data connection - PORT */ + if (!connect) { + apr_sockaddr_t *local_addr; + char *local_ip; + apr_port_t local_port; + unsigned int h0, h1, h2, h3, p0, p1; + + if ((rv = apr_socket_create(&local_sock, connect_addr->family, SOCK_STREAM, r->pool)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error creating local socket"); + return HTTP_INTERNAL_SERVER_ERROR; + } + apr_socket_addr_get(&local_addr, APR_LOCAL, sock); + apr_sockaddr_port_get(&local_port, local_addr); + apr_sockaddr_ip_get(&local_ip, local_addr); + + if ((rv = apr_socket_opt_set(local_sock, APR_SO_REUSEADDR, one)) + != APR_SUCCESS) { +#ifndef _OSD_POSIX /* BS2000 has this option "always on" */ + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error setting reuseaddr option"); + return HTTP_INTERNAL_SERVER_ERROR; +#endif /* _OSD_POSIX */ + } + + apr_sockaddr_info_get(&local_addr, local_ip, APR_UNSPEC, local_port, 0, r->pool); + + if ((rv = apr_bind(local_sock, local_addr)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error binding to ftp data socket %pI", local_addr); + return HTTP_INTERNAL_SERVER_ERROR; + } + + /* only need a short queue */ + if ((rv = apr_listen(local_sock, 2)) != APR_SUCCESS) { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: error listening to ftp data socket %pI", local_addr); + return HTTP_INTERNAL_SERVER_ERROR; + } + +/* FIXME: Sent PORT here */ + + if (local_ip && (sscanf(local_ip, + "%d.%d.%d.%d", &h3, &h2, &h1, &h0) == 4)) { + p1 = (local_port >> 8); + p0 = (local_port & 0xFF); + + rc = proxy_ftp_command(apr_psprintf(p, "PORT %d,%d,%d,%d,%d,%d" CRLF, h3, h2, h1, h0, p1, p0), + r, origin, bb, &ftpmessage); + /* possible results: 200, 421, 500, 501, 502, 530 */ + /* 200 Command okay. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc != 200) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, buffer); + } + + /* signal that we must use the EPRT/PORT loop */ + use_port = 1; + } + else { +/* IPV6 FIXME: + * The EPRT command replaces PORT where both IPV4 and IPV6 is supported. The first + * number (1,2) indicates the protocol type. Examples: + * EPRT |1|132.235.1.2|6275| + * EPRT |2|1080::8:800:200C:417A|5282| + */ + return ap_proxyerror(r, HTTP_NOT_IMPLEMENTED, "Connect to IPV6 ftp server using EPRT not supported. Enable EPSV."); + } + } + + + /* + * V: Set The Headers ------------------- + * + * Get the size of the request, set up the environment for HTTP. + */ + + /* set request; "path" holds last path component */ + len = decodeenc(path); + + if (strchr(path, '/')) { /* are there now any '/' characters? */ + return ap_proxyerror(r, HTTP_BAD_REQUEST, + "Use of /%2f is only allowed at the base directory"); + } + + /* If len == 0 then it must be a directory (you can't RETR nothing) + * Also, don't allow to RETR by wildcard. Instead, create a dirlisting + */ + if (len == 0 || ftp_check_globbingchars(path)) { + dirlisting = 1; + } + else { + /* (from FreeBSD ftpd): + * SIZE is not in RFC959, but Postel has blessed it and + * it will be in the updated RFC. + * + * Return size of file in a format suitable for + * using with RESTART (we just count bytes). + */ + /* from draft-ietf-ftpext-mlst-14.txt: + * This value will + * change depending on the current STRUcture, MODE and TYPE of the data + * connection, or a data connection which would be created were one + * created now. Thus, the result of the SIZE command is dependent on + * the currently established STRU, MODE and TYPE parameters. + */ + /* Therefore: switch to binary if the user did not specify ";type=a" */ + ftp_set_TYPE(xfer_type, r, origin, bb, &ftpmessage); + rc = proxy_ftp_command(apr_pstrcat(p, "SIZE ", + ftp_escape_globbingchars(p, path), CRLF, NULL), + r, origin, bb, &ftpmessage); + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + else if (rc == 213) {/* Size command ok */ + int j; + for (j = 0; apr_isdigit(ftpmessage[j]); j++) + ; + ftpmessage[j] = '\0'; + if (ftpmessage[0] != '\0') + size = ftpmessage; /* already pstrdup'ed: no copy necessary */ + } + else if (rc == 550) { /* Not a regular file */ + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: SIZE shows this is a directory"); + dirlisting = 1; + rc = proxy_ftp_command(apr_pstrcat(p, "CWD ", + ftp_escape_globbingchars(p, path), CRLF, NULL), + r, origin, bb, &ftpmessage); + /* possible results: 250, 421, 500, 501, 502, 530, 550 */ + /* 250 Requested file action okay, completed. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + /* 550 Requested action not taken. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc == 550) { + return ap_proxyerror(r, HTTP_NOT_FOUND, ftpmessage); + } + if (rc != 250) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + path = ""; + len = 0; + } + } + + cwd = ftp_get_PWD(r, origin, bb); + if (cwd != NULL) { + apr_table_set(r->notes, "Directory-PWD", cwd); + } + + if (dirlisting) { + ftp_set_TYPE('A', r, origin, bb, NULL); + /* If the current directory contains no slash, we are talking to + * a non-unix ftp system. Try LIST instead of "LIST -lag", it + * should return a long listing anyway (unlike NLST). + * Some exotic FTP servers might choke on the "-lag" switch. + */ + /* Note that we do not escape the path here, to allow for + * queries like: ftp://user@host/apache/src/server/http_*.c + */ + if (len != 0) + buf = apr_pstrcat(p, "LIST ", path, CRLF, NULL); + else if (cwd == NULL || strchr(cwd, '/') != NULL) + buf = apr_pstrcat(p, "LIST -lag", CRLF, NULL); + else + buf = "LIST" CRLF; + } + else { + /* switch to binary if the user did not specify ";type=a" */ + ftp_set_TYPE(xfer_type, r, origin, bb, &ftpmessage); +#if defined(USE_MDTM) && (defined(HAVE_TIMEGM) || defined(HAVE_GMTOFF)) + /* from draft-ietf-ftpext-mlst-14.txt: + * The FTP command, MODIFICATION TIME (MDTM), can be used to determine + * when a file in the server NVFS was last modified. <..> + * The syntax of a time value is: + * time-val = 14DIGIT [ "." 1*DIGIT ] <..> + * Symbolically, a time-val may be viewed as + * YYYYMMDDHHMMSS.sss + * The "." and subsequent digits ("sss") are optional. <..> + * Time values are always represented in UTC (GMT) + */ + rc = proxy_ftp_command(apr_pstrcat(p, "MDTM ", ftp_escape_globbingchars(p, path), CRLF, NULL), + r, origin, bb, &ftpmessage); + /* then extract the Last-Modified time from it (YYYYMMDDhhmmss or YYYYMMDDhhmmss.xxx GMT). */ + if (rc == 213) { + struct { + char YYYY[4+1]; + char MM[2+1]; + char DD[2+1]; + char hh[2+1]; + char mm[2+1]; + char ss[2+1]; + } time_val; + if (6 == sscanf(ftpmessage, "%4[0-9]%2[0-9]%2[0-9]%2[0-9]%2[0-9]%2[0-9]", + time_val.YYYY, time_val.MM, time_val.DD, time_val.hh, time_val.mm, time_val.ss)) { + struct tm tms; + memset (&tms, '\0', sizeof tms); + tms.tm_year = atoi(time_val.YYYY) - 1900; + tms.tm_mon = atoi(time_val.MM) - 1; + tms.tm_mday = atoi(time_val.DD); + tms.tm_hour = atoi(time_val.hh); + tms.tm_min = atoi(time_val.mm); + tms.tm_sec = atoi(time_val.ss); +#ifdef HAVE_TIMEGM /* Does system have timegm()? */ + mtime = timegm(&tms); + mtime *= APR_USEC_PER_SEC; +#elif HAVE_GMTOFF /* does struct tm have a member tm_gmtoff? */ + /* mktime will subtract the local timezone, which is not what we want. + * Add it again because the MDTM string is GMT + */ + mtime = mktime(&tms); + mtime += tms.tm_gmtoff; + mtime *= APR_USEC_PER_SEC; +#else + mtime = 0L; +#endif + } + } +#endif /* USE_MDTM */ +/* FIXME: Handle range requests - send REST */ + buf = apr_pstrcat(p, "RETR ", ftp_escape_globbingchars(p, path), CRLF, NULL); + } + rc = proxy_ftp_command(buf, r, origin, bb, &ftpmessage); + /* rc is an intermediate response for the LIST or RETR commands */ + + /* + * RETR: 110, 125, 150, 226, 250, 421, 425, 426, 450, 451, 500, 501, 530, + * 550 NLST: 125, 150, 226, 250, 421, 425, 426, 450, 451, 500, 501, 502, + * 530 + */ + /* 110 Restart marker reply. */ + /* 125 Data connection already open; transfer starting. */ + /* 150 File status okay; about to open data connection. */ + /* 226 Closing data connection. */ + /* 250 Requested file action okay, completed. */ + /* 421 Service not available, closing control connection. */ + /* 425 Can't open data connection. */ + /* 426 Connection closed; transfer aborted. */ + /* 450 Requested file action not taken. */ + /* 451 Requested action aborted. Local error in processing. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 530 Not logged in. */ + /* 550 Requested action not taken. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc == 550) { + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: RETR failed, trying LIST instead"); + + /* Directory Listings should always be fetched in ASCII mode */ + dirlisting = 1; + ftp_set_TYPE('A', r, origin, bb, NULL); + + rc = proxy_ftp_command(apr_pstrcat(p, "CWD ", + ftp_escape_globbingchars(p, path), CRLF, NULL), + r, origin, bb, &ftpmessage); + /* possible results: 250, 421, 500, 501, 502, 530, 550 */ + /* 250 Requested file action okay, completed. */ + /* 421 Service not available, closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + /* 501 Syntax error in parameters or arguments. */ + /* 502 Command not implemented. */ + /* 530 Not logged in. */ + /* 550 Requested action not taken. */ + if (rc == -1 || rc == 421) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc == 550) { + return ap_proxyerror(r, HTTP_NOT_FOUND, ftpmessage); + } + if (rc != 250) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + + /* Update current directory after CWD */ + cwd = ftp_get_PWD(r, origin, bb); + if (cwd != NULL) { + apr_table_set(r->notes, "Directory-PWD", cwd); + } + + /* See above for the "LIST" vs. "LIST -lag" discussion. */ + rc = proxy_ftp_command((cwd == NULL || strchr(cwd, '/') != NULL) + ? "LIST -lag" CRLF : "LIST" CRLF, + r, origin, bb, &ftpmessage); + + /* rc is an intermediate response for the LIST command (125 transfer starting, 150 opening data connection) */ + if (rc == -1 || rc == 421) + return ap_proxyerror(r, HTTP_BAD_GATEWAY, + "Error reading from remote server"); + } + if (rc != 125 && rc != 150 && rc != 226 && rc != 250) { + return ap_proxyerror(r, HTTP_BAD_GATEWAY, ftpmessage); + } + + r->status = HTTP_OK; + r->status_line = "200 OK"; + + apr_rfc822_date(dates, r->request_time); + apr_table_setn(r->headers_out, "Date", dates); + apr_table_setn(r->headers_out, "Server", ap_get_server_version()); + + /* set content-type */ + if (dirlisting) { + ap_set_content_type(r, "text/html; charset=ISO-8859-1"); + } + else { + if (r->content_type) { + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: Content-Type set to %s", r->content_type); + } + else { + ap_set_content_type(r, ap_default_type(r)); + } + if (xfer_type != 'A' && size != NULL) { + /* We "trust" the ftp server to really serve (size) bytes... */ + apr_table_setn(r->headers_out, "Content-Length", size); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: Content-Length set to %s", size); + } + } + apr_table_setn(r->headers_out, "Content-Type", r->content_type); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: Content-Type set to %s", r->content_type); + +#if defined(USE_MDTM) && (defined(HAVE_TIMEGM) || defined(HAVE_GMTOFF)) + if (mtime != 0L) { + char datestr[APR_RFC822_DATE_LEN]; + apr_rfc822_date(datestr, mtime); + apr_table_set(r->headers_out, "Last-Modified", datestr); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: Last-Modified set to %s", datestr); + } +#endif /* USE_MDTM */ + + /* If an encoding has been set by mistake, delete it. + * @@@ FIXME (e.g., for ftp://user@host/file*.tar.gz, + * @@@ the encoding is currently set to x-gzip) + */ + if (dirlisting && r->content_encoding != NULL) + r->content_encoding = NULL; + + /* set content-encoding (not for dir listings, they are uncompressed)*/ + if (r->content_encoding != NULL && r->content_encoding[0] != '\0') { + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: Content-Encoding set to %s", r->content_encoding); + apr_table_setn(r->headers_out, "Content-Encoding", r->content_encoding); + } + + /* wait for connection */ + if (use_port) { + for (;;) { + rv = apr_accept(&data_sock, local_sock, r->pool); + if (rv == APR_EINTR) { + continue; + } + else if (rv == APR_SUCCESS) { + break; + } + else { + ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, + "proxy: FTP: failed to accept data connection"); + return HTTP_BAD_GATEWAY; + } + } + } + + /* the transfer socket is now open, create a new connection */ + data = ap_run_create_connection(p, r->server, data_sock, r->connection->id, + r->connection->sbh, c->bucket_alloc); + if (!data) { + /* + * the peer reset the connection already; ap_run_create_connection() closed + * the socket + */ + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: an error occurred creating the transfer connection"); + return HTTP_INTERNAL_SERVER_ERROR; + } + + /* set up the connection filters */ + rc = ap_run_pre_connection(data, data_sock); + if (rc != OK && rc != DONE) { + data->aborted = 1; + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: pre_connection setup failed (%d)", + rc); + return rc; + } + + /* + * VI: Receive the Response ------------------------ + * + * Get response from the remote ftp socket, and pass it up the filter chain. + */ + + /* send response */ + r->sent_bodyct = 1; + + if (dirlisting) { + /* insert directory filter */ + ap_add_output_filter("PROXY_SEND_DIR", NULL, r, r->connection); + } + + /* send body */ + if (!r->header_only) { + apr_bucket *e; + int finish = FALSE; + + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: start body send"); + + /* read the body, pass it to the output filters */ + while (ap_get_brigade(data->input_filters, + bb, + AP_MODE_READBYTES, + APR_BLOCK_READ, + conf->io_buffer_size) == APR_SUCCESS) { +#if DEBUGGING + { + apr_off_t readbytes; + apr_brigade_length(bb, 0, &readbytes); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, + r->server, "proxy (PID %d): readbytes: %#x", + getpid(), readbytes); + } +#endif + /* sanity check */ + if (APR_BRIGADE_EMPTY(bb)) { + apr_brigade_cleanup(bb); + break; + } + + /* found the last brigade? */ + if (APR_BUCKET_IS_EOS(APR_BRIGADE_LAST(bb))) { + /* if this is the last brigade, cleanup the + * backend connection first to prevent the + * backend server from hanging around waiting + * for a slow client to eat these bytes + */ + ap_flush_conn(data); + if (data_sock) { + apr_socket_close(data_sock); + } + data_sock = NULL; + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: data connection closed"); + /* signal that we must leave */ + finish = TRUE; + } + + /* if no EOS yet, then we must flush */ + if (FALSE == finish) { + e = apr_bucket_flush_create(c->bucket_alloc); + APR_BRIGADE_INSERT_TAIL(bb, e); + } + + /* try send what we read */ + if (ap_pass_brigade(r->output_filters, bb) != APR_SUCCESS + || c->aborted) { + /* Ack! Phbtt! Die! User aborted! */ + finish = TRUE; + } + + /* make sure we always clean up after ourselves */ + apr_brigade_cleanup(bb); + + /* if we are done, leave */ + if (TRUE == finish) { + break; + } + } + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: end body send"); + + } + if (data_sock) { + ap_flush_conn(data); + apr_socket_close(data_sock); + ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, r->server, + "proxy: FTP: data connection closed"); + } + + /* Retrieve the final response for the RETR or LIST commands */ + rc = proxy_ftp_command(NULL, r, origin, bb, &ftpmessage); + apr_brigade_cleanup(bb); + + /* + * VII: Clean Up ------------- + * + * If there are no KeepAlives, or if the connection has been signalled to + * close, close the socket and clean up + */ + + /* finish */ + rc = proxy_ftp_command("QUIT" CRLF, + r, origin, bb, &ftpmessage); + /* responses: 221, 500 */ + /* 221 Service closing control connection. */ + /* 500 Syntax error, command unrecognized. */ + ap_flush_conn(origin); + if (origin_sock) { + apr_socket_close(origin_sock); + origin_sock = NULL; + } + apr_brigade_destroy(bb); + return OK; +} + +static void ap_proxy_ftp_register_hook(apr_pool_t *p) +{ + /* hooks */ + proxy_hook_scheme_handler(ap_proxy_ftp_handler, NULL, NULL, APR_HOOK_MIDDLE); + proxy_hook_canon_handler(ap_proxy_ftp_canon, NULL, NULL, APR_HOOK_MIDDLE); + /* filters */ + ap_register_output_filter("PROXY_SEND_DIR", ap_proxy_send_dir_filter, + NULL, AP_FTYPE_RESOURCE); +} + +module AP_MODULE_DECLARE_DATA proxy_ftp_module = { + STANDARD20_MODULE_STUFF, + NULL, /* create per-directory config structure */ + NULL, /* merge per-directory config structures */ + NULL, /* create per-server config structure */ + NULL, /* merge per-server config structures */ + NULL, /* command apr_table_t */ + ap_proxy_ftp_register_hook /* register hooks */ +}; |