diff options
Diffstat (limited to 'rubbos/app/apache2/include/apr_poll.h')
| -rw-r--r-- | rubbos/app/apache2/include/apr_poll.h | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/rubbos/app/apache2/include/apr_poll.h b/rubbos/app/apache2/include/apr_poll.h new file mode 100644 index 00000000..d71cc3a1 --- /dev/null +++ b/rubbos/app/apache2/include/apr_poll.h @@ -0,0 +1,253 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef APR_POLL_H +#define APR_POLL_H +/** + * @file apr_poll.h + * @brief APR Poll interface + */ +#include "apr.h" +#include "apr_pools.h" +#include "apr_errno.h" +#include "apr_inherit.h" +#include "apr_file_io.h" +#include "apr_network_io.h" + +#if APR_HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/** + * @defgroup apr_poll Poll Routines + * @ingroup APR + * @{ + */ + +/** + * @defgroup apr_poll_opt Poll options + * @{ + */ +#define APR_POLLIN 0x001 /**< Can read without blocking */ +#define APR_POLLPRI 0x002 /**< Priority data available */ +#define APR_POLLOUT 0x004 /**< Can write without blocking */ +#define APR_POLLERR 0x010 /**< Pending error */ +#define APR_POLLHUP 0x020 /**< Hangup occurred */ +#define APR_POLLNVAL 0x040 /**< Descriptior invalid */ +/** @} */ + +/** Used in apr_pollfd_t to determine what the apr_descriptor is */ +typedef enum { + APR_NO_DESC, /**< nothing here */ + APR_POLL_SOCKET, /**< descriptor refers to a socket */ + APR_POLL_FILE, /**< descriptor refers to a file */ + APR_POLL_LASTDESC /**< descriptor is the last one in the list */ +} apr_datatype_e ; + +/** Union of either an APR file or socket. */ +typedef union { + apr_file_t *f; /**< file */ + apr_socket_t *s; /**< socket */ +} apr_descriptor; + +/** @see apr_pollfd_t */ +typedef struct apr_pollfd_t apr_pollfd_t; + +/** Poll descriptor set. */ +struct apr_pollfd_t { + apr_pool_t *p; /**< associated pool */ + apr_datatype_e desc_type; /**< descriptor type */ + apr_int16_t reqevents; /**< requested events */ + apr_int16_t rtnevents; /**< returned events */ + apr_descriptor desc; /**< @see apr_descriptor */ + void *client_data; /**< allows app to associate context */ +}; + +/** + * Setup the memory required for poll to operate properly + * @param new_poll The poll structure to be used. + * @param num The number of socket descriptors to be polled. + * @param cont The pool to operate on. + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_setup(apr_pollfd_t **new_poll, + apr_int32_t num, + apr_pool_t *cont); + +/** + * Poll the sockets in the poll structure + * @param aprset The poll structure we will be using. + * @param numsock The number of sockets we are polling + * @param nsds The number of sockets signalled. + * @param timeout The amount of time in microseconds to wait. This is + * a maximum, not a minimum. If a socket is signalled, we + * will wake up before this time. A negative number means + * wait until a socket is signalled. + * @remark + * <PRE> + * The number of sockets signalled is returned in the second argument. + * + * This is a blocking call, and it will not return until either a + * socket has been signalled, or the timeout has expired. + * </PRE> + */ +APR_DECLARE(apr_status_t) apr_poll(apr_pollfd_t *aprset, apr_int32_t numsock, + apr_int32_t *nsds, + apr_interval_time_t timeout); + +/** + * Add a socket to the poll structure. + * @param aprset The poll structure we will be using. + * @param sock The socket to add to the current poll structure. + * @param event The events to look for when we do the poll. One of: + * <PRE> + * APR_POLLIN signal if read will not block + * APR_POLLPRI signal if prioirty data is availble to be read + * APR_POLLOUT signal if write will not block + * </PRE> + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_socket_add(apr_pollfd_t *aprset, + apr_socket_t *sock, + apr_int16_t event); + +/** + * Modify a socket in the poll structure with mask. + * @param aprset The poll structure we will be using. + * @param sock The socket to modify in poll structure. + * @param events The events to stop looking for during the poll. One of: + * <PRE> + * APR_POLLIN signal if read will not block + * APR_POLLPRI signal if priority data is available to be read + * APR_POLLOUT signal if write will not block + * </PRE> + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_socket_mask(apr_pollfd_t *aprset, + apr_socket_t *sock, + apr_int16_t events); +/** + * Remove a socket from the poll structure. + * @param aprset The poll structure we will be using. + * @param sock The socket to remove from the current poll structure. + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_socket_remove(apr_pollfd_t *aprset, + apr_socket_t *sock); + +/** + * Clear all events in the poll structure. + * @param aprset The poll structure we will be using. + * @param events The events to clear from all sockets. One of: + * <PRE> + * APR_POLLIN signal if read will not block + * APR_POLLPRI signal if priority data is available to be read + * APR_POLLOUT signal if write will not block + * </PRE> + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_socket_clear(apr_pollfd_t *aprset, + apr_int16_t events); + +/** + * Get the return events for the specified socket. + * @param event The returned events for the socket. One of: + * <PRE> + * APR_POLLIN Data is available to be read + * APR_POLLPRI Priority data is availble to be read + * APR_POLLOUT Write will succeed + * APR_POLLERR An error occurred on the socket + * APR_POLLHUP The connection has been terminated + * APR_POLLNVAL This is an invalid socket to poll on. + * Socket not open. + * </PRE> + * @param sock The socket we wish to get information about. + * @param aprset The poll structure we will be using. + * @deprecated This function is deprecated, APR applications should control the pollset memory themselves. + */ +APR_DECLARE(apr_status_t) apr_poll_revents_get(apr_int16_t *event, + apr_socket_t *sock, + apr_pollfd_t *aprset); + +/* General-purpose poll API for arbitrarily large numbers of + * file descriptors + */ + +/** Opaque structure used for pollset API */ +typedef struct apr_pollset_t apr_pollset_t; + +/** + * Setup a pollset object + * @param pollset The pointer in which to return the newly created object + * @param size The maximum number of descriptors that this pollset can hold + * @param p The pool from which to allocate the pollset + * @param flags Optional flags to modify the operation of the pollset + * (reserved for future expansion) + */ +APR_DECLARE(apr_status_t) apr_pollset_create(apr_pollset_t **pollset, + apr_uint32_t size, + apr_pool_t *p, + apr_uint32_t flags); + +/** + * Destroy a pollset object + * @param pollset The pollset to destroy + */ +APR_DECLARE(apr_status_t) apr_pollset_destroy(apr_pollset_t *pollset); + +/** + * Add a socket or file descriptor to a pollset + * @param pollset The pollset to which to add the descriptor + * @param descriptor The descriptor to add + * @remark If you set client_data in the descriptor, that value + * will be returned in the client_data field whenever this + * descriptor is signalled in apr_pollset_poll(). + */ +APR_DECLARE(apr_status_t) apr_pollset_add(apr_pollset_t *pollset, + const apr_pollfd_t *descriptor); + +/** + * Remove a descriptor from a pollset + * @param pollset The pollset from which to remove the descriptor + * @param descriptor The descriptor to remove + */ +APR_DECLARE(apr_status_t) apr_pollset_remove(apr_pollset_t *pollset, + const apr_pollfd_t *descriptor); + +/** + * Block for activity on the descriptor(s) in a pollset + * @param pollset The pollset to use + * @param timeout Timeout in microseconds + * @param num Number of signalled descriptors (output parameter) + * @param descriptors Array of signalled descriptors (output parameter) + */ +APR_DECLARE(apr_status_t) apr_pollset_poll(apr_pollset_t *pollset, + apr_interval_time_t timeout, + apr_int32_t *num, + const apr_pollfd_t **descriptors); + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif /* ! APR_POLL_H */ + |