Clear Magic IP

Clear magic ips, all node ips are configured in
set_bottlenecks_rubbos_env.sh

JIRA:BOTTLENECK-24

Change-Id: I13161439e00a75acd51a09cdc67a8ee6e18ea633
Signed-off-by: QiLiang <liangqi1@huawei.com>

1 files changed, 0 insertions, 215 deletions

diff --git a/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties b/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties
deleted file mode 100644
index d9c77fe0..00000000
--- a/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties
+++ /dev/null
@@ -1,215 +0,0 @@
-
-# workers.properties -
-#
-# This file provides jk derived plugins with the needed information to
-# connect to the different tomcat workers.  Note that the distributed
-# version of this file requires modification before it is usable by a
-# plugin.
-#
-# As a general note, the characters $( and ) are used internally to define
-# macros. Do not use them in your own configuration!!!
-#
-# Whenever you see a set of lines such as:
-# x=value
-# y=$(x)\something
-#
-# the final value for y will be value\something
-#
-# Normaly all you will need to do is un-comment and modify the first three
-# properties, i.e. workers.tomcat_home, workers.java_home and ps.
-# Most of the configuration is derived from these.
-#
-# When you are done updating workers.tomcat_home, workers.java_home and ps
-# you should have 3 workers configured:
-#
-# - An ajp12 worker that connects to localhost:8007
-# - An ajp13 worker that connects to localhost:8009
-# - A jni inprocess worker.
-# - A load balancer worker
-#
-# However by default the plugins will only use the ajp12 worker. To have
-# the plugins use other workers you should modify the worker.list property.
-#
-#
-
-# OPTIONS ( very important for jni mode ) 
-
-#
-# workers.tomcat_home should point to the location where you
-# installed tomcat. This is where you have your conf, webapps and lib
-# directories.
-#
-#workers.tomcat_home=/mnt/elba/rubbos/apache-tomcat-5.5.17
-workers.tomcat_home=/bottlenecks/rubbos/app/apache-tomcat-5.5.17
-
-#
-# workers.java_home should point to your Java installation. Normally
-# you should have a bin and lib directories beneath it.
-#
-#workers.java_home=/mnt/elba/rubbos/jdk1.6.0_27
-workers.java_home=/bottlenecks/rubbos/app/jdk1.6.0_27
-
-#
-# You should configure your environment slash... ps=\ on NT and / on UNIX
-# and maybe something different elsewhere.
-#
-ps=/
-
-#
-#------ ADVANCED MODE ------------------------------------------------
-#---------------------------------------------------------------------
-#
-
-#
-#------ DEFAULT worket list ------------------------------------------
-#---------------------------------------------------------------------
-#
-#
-# The workers that your plugins should create and work with
-#
-# Add 'inprocess' if you want JNI connector 
-worker.list=worker1
-# , inprocess
-
-
-worker.TOMCAT1.port=8009
-worker.TOMCAT1.host=192.168.122.14
-worker.TOMCAT1.type=ajp13
-worker.TOMCAT1.lbfactor=1
-
-
-#
-#------ DEFAULT ajp12 WORKER DEFINITION ------------------------------
-#---------------------------------------------------------------------
-#
-
-#
-# Defining a worker named ajp12 and of type ajp12
-# Note that the name and the type do not have to match.
-#
-#worker.ajp12.port=8007
-#worker.ajp12.host=localhost
-#worker.ajp12.type=ajp12
-#
-# Specifies the load balance factor when used with
-# a load balancing worker.
-# Note:
-#  ----> lbfactor must be > 0
-#  ----> Low lbfactor means less work done by the worker.
-#worker.ajp12.lbfactor=1
-
-#
-#------ DEFAULT ajp13 WORKER DEFINITION ------------------------------
-#---------------------------------------------------------------------
-#
-
-#
-# Defining a worker named ajp13 and of type ajp13
-# Note that the name and the type do not have to match.
-#
-#worker.ajp13.port=8009
-#worker.ajp13.host=node60.rubbostest.Infosphere.emulab.net
-#worker.ajp13.type=ajp13
-#
-# Specifies the load balance factor when used with
-# a load balancing worker.
-# Note:
-#  ----> lbfactor must be > 0
-#  ----> Low lbfactor means less work done by the worker.
-#worker.ajp13.lbfactor=1
-
-#
-# Specify the size of the open connection cache.
-#worker.ajp13.cachesize
-
-#
-#------ DEFAULT LOAD BALANCER WORKER DEFINITION ----------------------
-#---------------------------------------------------------------------
-#
-
-#
-# The router (type lb) workers perform wighted round-robin
-# load balancing with sticky sessions.
-# Note:
-#  ----> If a worker dies, the load balancer will check its state
-#        once in a while. Until then all work is redirected to peer
-#        workers.
-worker.worker1.type=lb
-worker.worker1.balance_workers=TOMCAT1
-worker.worker1.sticky_session=True
-worker.worker1.method=Session
-
-#
-#------ DEFAULT JNI WORKER DEFINITION---------------------------------
-#---------------------------------------------------------------------
-#
-
-#
-# Defining a worker named inprocess and of type jni
-# Note that the name and the type do not have to match.
-#
-worker.inprocess.type=jni
-
-#
-#------ CLASSPATH DEFINITION -----------------------------------------
-#---------------------------------------------------------------------
-#
-
-#
-# Additional class path components.
-#
-worker.inprocess.class_path=$(workers.tomcat_home)$(ps)lib$(ps)tomcat.jar
-
-#
-# Setting the command line for tomcat. 
-# Note: The cmd_line string may not contain spaces.
-#
-worker.inprocess.cmd_line=start
-
-# Not needed, but can be customized.
-#worker.inprocess.cmd_line=-config
-#worker.inprocess.cmd_line=$(workers.tomcat_home)$(ps)conf$(ps)server.xml
-#worker.inprocess.cmd_line=-home
-#worker.inprocess.cmd_line=$(workers.tomcat_home)
-
-#
-# The JVM that we are about to use
-#
-# This is for Java2
-#
-# Windows
-#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)jvm.dll
-# IBM JDK1.3 
-#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)libjvm.so
-# Unix - Sun VM or blackdown
-#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)classic$(ps)libjvm.so
-worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)server$(ps)libjvm.so
-
-#
-# And this is for jdk1.1.X
-#
-#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)bin$(ps)javai.dll
-
-
-#
-# Setting the place for the stdout and stderr of tomcat
-#
-worker.inprocess.stdout=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stdout
-worker.inprocess.stderr=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stderr
-
-#
-# Setting the tomcat.home Java property
-#
-#worker.inprocess.sysprops=tomcat.home=$(workers.tomcat_home)
-
-#
-# Java system properties
-#
-# worker.inprocess.sysprops=java.compiler=NONE
-# worker.inprocess.sysprops=myprop=mypropvalue
-
-#
-# Additional path components.
-#
-# worker.inprocess.ld_path=d:$(ps)SQLLIB$(ps)bin
-#