bottleneck testcase based on rubbos

JIRA: BOTTLENECK-31

Change-Id: I35b1bcdca28c4e06e316143cc895b4cdf689d0d3
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 215 insertions, 0 deletions

diff --git a/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties b/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties
new file mode 100644
index 00000000..df4134bd
--- /dev/null
+++ b/rubbos/rubbos_scripts/1-1-1/apache_conf/workers.properties
@@ -0,0 +1,215 @@
+
+# workers.properties -
+#
+# This file provides jk derived plugins with the needed information to
+# connect to the different tomcat workers.  Note that the distributed
+# version of this file requires modification before it is usable by a
+# plugin.
+#
+# As a general note, the characters $( and ) are used internally to define
+# macros. Do not use them in your own configuration!!!
+#
+# Whenever you see a set of lines such as:
+# x=value
+# y=$(x)\something
+#
+# the final value for y will be value\something
+#
+# Normaly all you will need to do is un-comment and modify the first three
+# properties, i.e. workers.tomcat_home, workers.java_home and ps.
+# Most of the configuration is derived from these.
+#
+# When you are done updating workers.tomcat_home, workers.java_home and ps
+# you should have 3 workers configured:
+#
+# - An ajp12 worker that connects to localhost:8007
+# - An ajp13 worker that connects to localhost:8009
+# - A jni inprocess worker.
+# - A load balancer worker
+#
+# However by default the plugins will only use the ajp12 worker. To have
+# the plugins use other workers you should modify the worker.list property.
+#
+#
+
+# OPTIONS ( very important for jni mode ) 
+
+#
+# workers.tomcat_home should point to the location where you
+# installed tomcat. This is where you have your conf, webapps and lib
+# directories.
+#
+#workers.tomcat_home=/mnt/elba/rubbos/apache-tomcat-5.5.17
+workers.tomcat_home=/bottlenecks/rubbos/app/apache-tomcat-5.5.17
+
+#
+# workers.java_home should point to your Java installation. Normally
+# you should have a bin and lib directories beneath it.
+#
+#workers.java_home=/mnt/elba/rubbos/jdk1.6.0_27
+workers.java_home=/bottlenecks/rubbos/app/jdk1.6.0_27
+
+#
+# You should configure your environment slash... ps=\ on NT and / on UNIX
+# and maybe something different elsewhere.
+#
+ps=/
+
+#
+#------ ADVANCED MODE ------------------------------------------------
+#---------------------------------------------------------------------
+#
+
+#
+#------ DEFAULT worket list ------------------------------------------
+#---------------------------------------------------------------------
+#
+#
+# The workers that your plugins should create and work with
+#
+# Add 'inprocess' if you want JNI connector 
+worker.list=worker1
+# , inprocess
+
+
+worker.TOMCAT1.port=8009
+worker.TOMCAT1.host=node8
+worker.TOMCAT1.type=ajp13
+worker.TOMCAT1.lbfactor=1
+
+
+#
+#------ DEFAULT ajp12 WORKER DEFINITION ------------------------------
+#---------------------------------------------------------------------
+#
+
+#
+# Defining a worker named ajp12 and of type ajp12
+# Note that the name and the type do not have to match.
+#
+#worker.ajp12.port=8007
+#worker.ajp12.host=localhost
+#worker.ajp12.type=ajp12
+#
+# Specifies the load balance factor when used with
+# a load balancing worker.
+# Note:
+#  ----> lbfactor must be > 0
+#  ----> Low lbfactor means less work done by the worker.
+#worker.ajp12.lbfactor=1
+
+#
+#------ DEFAULT ajp13 WORKER DEFINITION ------------------------------
+#---------------------------------------------------------------------
+#
+
+#
+# Defining a worker named ajp13 and of type ajp13
+# Note that the name and the type do not have to match.
+#
+#worker.ajp13.port=8009
+#worker.ajp13.host=node60.rubbostest.Infosphere.emulab.net
+#worker.ajp13.type=ajp13
+#
+# Specifies the load balance factor when used with
+# a load balancing worker.
+# Note:
+#  ----> lbfactor must be > 0
+#  ----> Low lbfactor means less work done by the worker.
+#worker.ajp13.lbfactor=1
+
+#
+# Specify the size of the open connection cache.
+#worker.ajp13.cachesize
+
+#
+#------ DEFAULT LOAD BALANCER WORKER DEFINITION ----------------------
+#---------------------------------------------------------------------
+#
+
+#
+# The router (type lb) workers perform wighted round-robin
+# load balancing with sticky sessions.
+# Note:
+#  ----> If a worker dies, the load balancer will check its state
+#        once in a while. Until then all work is redirected to peer
+#        workers.
+worker.worker1.type=lb
+worker.worker1.balance_workers=TOMCAT1
+worker.worker1.sticky_session=True
+worker.worker1.method=Session
+
+#
+#------ DEFAULT JNI WORKER DEFINITION---------------------------------
+#---------------------------------------------------------------------
+#
+
+#
+# Defining a worker named inprocess and of type jni
+# Note that the name and the type do not have to match.
+#
+worker.inprocess.type=jni
+
+#
+#------ CLASSPATH DEFINITION -----------------------------------------
+#---------------------------------------------------------------------
+#
+
+#
+# Additional class path components.
+#
+worker.inprocess.class_path=$(workers.tomcat_home)$(ps)lib$(ps)tomcat.jar
+
+#
+# Setting the command line for tomcat. 
+# Note: The cmd_line string may not contain spaces.
+#
+worker.inprocess.cmd_line=start
+
+# Not needed, but can be customized.
+#worker.inprocess.cmd_line=-config
+#worker.inprocess.cmd_line=$(workers.tomcat_home)$(ps)conf$(ps)server.xml
+#worker.inprocess.cmd_line=-home
+#worker.inprocess.cmd_line=$(workers.tomcat_home)
+
+#
+# The JVM that we are about to use
+#
+# This is for Java2
+#
+# Windows
+#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)jvm.dll
+# IBM JDK1.3 
+#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)bin$(ps)classic$(ps)libjvm.so
+# Unix - Sun VM or blackdown
+#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)classic$(ps)libjvm.so
+worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)server$(ps)libjvm.so
+
+#
+# And this is for jdk1.1.X
+#
+#worker.inprocess.jvm_lib=$(workers.java_home)$(ps)bin$(ps)javai.dll
+
+
+#
+# Setting the place for the stdout and stderr of tomcat
+#
+worker.inprocess.stdout=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stdout
+worker.inprocess.stderr=$(workers.tomcat_home)$(ps)logs$(ps)inprocess.stderr
+
+#
+# Setting the tomcat.home Java property
+#
+#worker.inprocess.sysprops=tomcat.home=$(workers.tomcat_home)
+
+#
+# Java system properties
+#
+# worker.inprocess.sysprops=java.compiler=NONE
+# worker.inprocess.sysprops=myprop=mypropvalue
+
+#
+# Additional path components.
+#
+# worker.inprocess.ld_path=d:$(ps)SQLLIB$(ps)bin
+#