upload http

JIRA: BOTTLENECK-10

Change-Id: I7598427ff904df438ce77c2819ee48ac75ffa8da
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 357 insertions, 0 deletions

diff --git a/rubbos/app/httpd-2.0.64/srclib/apr/time/win32/time.c b/rubbos/app/httpd-2.0.64/srclib/apr/time/win32/time.c
new file mode 100644
index 00000000..2711488f
--- /dev/null
+++ b/rubbos/app/httpd-2.0.64/srclib/apr/time/win32/time.c
@@ -0,0 +1,357 @@
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License.  You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "win32/apr_arch_atime.h"
+#include "apr_time.h"
+#include "apr_general.h"
+#include "apr_lib.h"
+#include "apr_portable.h"
+#if APR_HAVE_TIME_H
+#include <time.h>
+#endif
+#if APR_HAVE_ERRNO_H
+#include <errno.h>
+#endif
+#include <string.h>
+#include <winbase.h>
+#include "apr_arch_misc.h"
+
+/* Leap year is any year divisible by four, but not by 100 unless also
+ * divisible by 400
+ */
+#define IsLeapYear(y) ((!(y % 4)) ? (((!(y % 400)) && (y % 100)) ? 1 : 0) : 0)
+
+static DWORD get_local_timezone(TIME_ZONE_INFORMATION **tzresult)
+{
+    static TIME_ZONE_INFORMATION tz;
+    static DWORD result;
+    static int init = 0;
+
+    if (!init) {
+        result = GetTimeZoneInformation(&tz);
+        init = 1;
+    }
+
+    *tzresult = &tz;
+    return result;
+}
+
+static void SystemTimeToAprExpTime(apr_time_exp_t *xt, SYSTEMTIME *tm)
+{
+    static const int dayoffset[12] =
+    {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334};
+
+    /* Note; the caller is responsible for filling in detailed tm_usec,
+     * tm_gmtoff and tm_isdst data when applicable.
+     */
+    xt->tm_usec = tm->wMilliseconds * 1000;
+    xt->tm_sec  = tm->wSecond;
+    xt->tm_min  = tm->wMinute;
+    xt->tm_hour = tm->wHour;
+    xt->tm_mday = tm->wDay;
+    xt->tm_mon  = tm->wMonth - 1;
+    xt->tm_year = tm->wYear - 1900;
+    xt->tm_wday = tm->wDayOfWeek;
+    xt->tm_yday = dayoffset[xt->tm_mon] + (tm->wDay - 1);
+    xt->tm_isdst = 0;
+    xt->tm_gmtoff = 0;
+
+    /* If this is a leap year, and we're past the 28th of Feb. (the
+     * 58th day after Jan. 1), we'll increment our tm_yday by one.
+     */
+    if (IsLeapYear(tm->wYear) && (xt->tm_yday > 58))
+        xt->tm_yday++;
+}
+
+APR_DECLARE(apr_status_t) apr_time_ansi_put(apr_time_t *result, 
+                                                    time_t input)
+{
+    *result = (apr_time_t) input * APR_USEC_PER_SEC;
+    return APR_SUCCESS;
+}
+
+/* Return micro-seconds since the Unix epoch (jan. 1, 1970) UTC */
+APR_DECLARE(apr_time_t) apr_time_now(void)
+{
+    LONGLONG aprtime = 0;
+    FILETIME time;
+#ifndef _WIN32_WCE
+    GetSystemTimeAsFileTime(&time);
+#else
+    SYSTEMTIME st;
+    GetSystemTime(&st);
+    SystemTimeToFileTime(&st, &time);
+#endif
+    FileTimeToAprTime(&aprtime, &time);
+    return aprtime; 
+}
+
+APR_DECLARE(apr_status_t) apr_time_exp_gmt(apr_time_exp_t *result,
+                                           apr_time_t input)
+{
+    FILETIME ft;
+    SYSTEMTIME st;
+    AprTimeToFileTime(&ft, input);
+    FileTimeToSystemTime(&ft, &st);
+    /* The Platform SDK documents that SYSTEMTIME/FILETIME are
+     * generally UTC, so no timezone info needed
+     */
+    SystemTimeToAprExpTime(result, &st);
+    result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_time_exp_tz(apr_time_exp_t *result, 
+                                          apr_time_t input, 
+                                          apr_int32_t offs)
+{
+    FILETIME ft;
+    SYSTEMTIME st;
+    AprTimeToFileTime(&ft, input + (offs *  APR_USEC_PER_SEC));
+    FileTimeToSystemTime(&ft, &st);
+    /* The Platform SDK documents that SYSTEMTIME/FILETIME are
+     * generally UTC, so we will simply note the offs used.
+     */
+    SystemTimeToAprExpTime(result, &st);
+    result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
+    result->tm_gmtoff = offs;
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_time_exp_lt(apr_time_exp_t *result,
+                                          apr_time_t input)
+{
+    SYSTEMTIME st;
+    FILETIME ft, localft;
+
+    AprTimeToFileTime(&ft, input);
+
+#if APR_HAS_UNICODE_FS && !defined(_WIN32_WCE)
+    IF_WIN_OS_IS_UNICODE
+    {
+        TIME_ZONE_INFORMATION *tz;
+        SYSTEMTIME localst;
+        apr_time_t localtime;
+
+        get_local_timezone(&tz);
+
+        FileTimeToSystemTime(&ft, &st);
+
+        /* The Platform SDK documents that SYSTEMTIME/FILETIME are
+         * generally UTC.  We use SystemTimeToTzSpecificLocalTime
+         * because FileTimeToLocalFileFime is documented that the
+         * resulting time local file time would have DST relative
+         * to the *present* date, not the date converted.
+         */
+        SystemTimeToTzSpecificLocalTime(tz, &st, &localst);
+        SystemTimeToAprExpTime(result, &localst);
+        result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
+
+
+        /* Recover the resulting time as an apr time and use the
+         * delta for gmtoff in seconds (and ignore msec rounding) 
+         */
+        SystemTimeToFileTime(&localst, &localft);
+        FileTimeToAprTime(&localtime, &localft);
+        result->tm_gmtoff = (int)apr_time_sec(localtime) 
+                          - (int)apr_time_sec(input);
+
+        /* To compute the dst flag, we compare the expected 
+         * local (standard) timezone bias to the delta.
+         * [Note, in war time or double daylight time the
+         * resulting tm_isdst is, desireably, 2 hours]
+         */
+        result->tm_isdst = (result->tm_gmtoff / 3600)
+                         - (-(tz->Bias + tz->StandardBias) / 60);
+    }
+#endif
+#if APR_HAS_ANSI_FS || defined(_WIN32_WCE)
+    ELSE_WIN_OS_IS_ANSI
+    {
+        TIME_ZONE_INFORMATION tz;
+	/* XXX: This code is simply *wrong*.  The time converted will always
+         * map to the *now current* status of daylight savings time.
+         */
+
+        FileTimeToLocalFileTime(&ft, &localft);
+        FileTimeToSystemTime(&localft, &st);
+        SystemTimeToAprExpTime(result, &st);
+        result->tm_usec = (apr_int32_t) (input % APR_USEC_PER_SEC);
+
+        switch (GetTimeZoneInformation(&tz)) {
+            case TIME_ZONE_ID_UNKNOWN:
+                result->tm_isdst = 0;
+                /* Bias = UTC - local time in minutes
+                 * tm_gmtoff is seconds east of UTC
+                 */
+                result->tm_gmtoff = tz.Bias * -60;
+                break;
+            case TIME_ZONE_ID_STANDARD:
+                result->tm_isdst = 0;
+                result->tm_gmtoff = (tz.Bias + tz.StandardBias) * -60;
+                break;
+            case TIME_ZONE_ID_DAYLIGHT:
+                result->tm_isdst = 1;
+                result->tm_gmtoff = (tz.Bias + tz.DaylightBias) * -60;
+                break;
+            default:
+                /* noop */;
+        }
+    }
+#endif
+
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_time_exp_get(apr_time_t *t,
+                                           apr_time_exp_t *xt)
+{
+    apr_time_t year = xt->tm_year;
+    apr_time_t days;
+    static const int dayoffset[12] =
+    {306, 337, 0, 31, 61, 92, 122, 153, 184, 214, 245, 275};
+
+    /* shift new year to 1st March in order to make leap year calc easy */
+
+    if (xt->tm_mon < 2)
+        year--;
+
+    /* Find number of days since 1st March 1900 (in the Gregorian calendar). */
+
+    days = year * 365 + year / 4 - year / 100 + (year / 100 + 3) / 4;
+    days += dayoffset[xt->tm_mon] + xt->tm_mday - 1;
+    days -= 25508;              /* 1 jan 1970 is 25508 days since 1 mar 1900 */
+
+    days = ((days * 24 + xt->tm_hour) * 60 + xt->tm_min) * 60 + xt->tm_sec;
+
+    if (days < 0) {
+        return APR_EBADDATE;
+    }
+    *t = days * APR_USEC_PER_SEC + xt->tm_usec;
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_time_exp_gmt_get(apr_time_t *t,
+                                               apr_time_exp_t *xt)
+{
+    apr_status_t status = apr_time_exp_get(t, xt);
+    if (status == APR_SUCCESS)
+        *t -= (apr_time_t) xt->tm_gmtoff * APR_USEC_PER_SEC;
+    return status;
+}
+
+APR_DECLARE(apr_status_t) apr_os_imp_time_get(apr_os_imp_time_t **ostime,
+                                              apr_time_t *aprtime)
+{
+    /* TODO: Consider not passing in pointer to apr_time_t (e.g., call by value) */
+    AprTimeToFileTime(*ostime, *aprtime);
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_os_exp_time_get(apr_os_exp_time_t **ostime, 
+                                              apr_time_exp_t *aprexptime)
+{
+    (*ostime)->wYear = aprexptime->tm_year + 1900;
+    (*ostime)->wMonth = aprexptime->tm_mon + 1;
+    (*ostime)->wDayOfWeek = aprexptime->tm_wday;
+    (*ostime)->wDay = aprexptime->tm_mday;
+    (*ostime)->wHour = aprexptime->tm_hour;
+    (*ostime)->wMinute = aprexptime->tm_min;
+    (*ostime)->wSecond = aprexptime->tm_sec;
+    (*ostime)->wMilliseconds = aprexptime->tm_usec / 1000;
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_os_imp_time_put(apr_time_t *aprtime,
+                                              apr_os_imp_time_t **ostime,
+                                              apr_pool_t *cont)
+{
+    /* XXX: sanity failure, what is file time, gmt or local ?
+     */
+    FileTimeToAprTime(aprtime, *ostime);
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(apr_status_t) apr_os_exp_time_put(apr_time_exp_t *aprtime,
+                                              apr_os_exp_time_t **ostime,
+                                              apr_pool_t *cont)
+{
+    /* The Platform SDK documents that SYSTEMTIME/FILETIME are
+     * generally UTC, so no timezone info needed
+     */
+    SystemTimeToAprExpTime(aprtime, *ostime);
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(void) apr_sleep(apr_interval_time_t t)
+{
+    /* One of the few sane situations for a cast, Sleep
+     * is in ms, not us, and passed as a DWORD value
+     */
+    Sleep((DWORD)(t / 1000));
+}
+
+#if defined(_WIN32_WCE)
+/* A noop on WinCE, like Unix implementation */
+APR_DECLARE(void) apr_time_clock_hires(apr_pool_t *p)
+{
+    return;
+}
+#else
+static apr_status_t clock_restore(void *unsetres)
+{
+    ULONG newRes;
+    SetTimerResolution((ULONG)unsetres, FALSE, &newRes);
+    return APR_SUCCESS;
+}
+
+APR_DECLARE(void) apr_time_clock_hires(apr_pool_t *p)
+{
+    ULONG newRes;
+    /* Timer resolution is stated in 100ns units.  Note that TRUE requests the
+     * new clock resolution, FALSE above releases the request.
+     */
+    if (SetTimerResolution(10000, TRUE, &newRes) == 0 /* STATUS_SUCCESS */) {
+        /* register the cleanup... */
+        apr_pool_cleanup_register(p, (void*)10000, clock_restore,
+                                  apr_pool_cleanup_null);
+    }
+}
+#endif
+
+
+/* Deprecated */
+APR_DECLARE(apr_status_t) apr_explode_time(apr_time_exp_t *result,
+                                          apr_time_t input,
+                                          apr_int32_t offs)
+{
+    return apr_time_exp_tz(result, input, offs);
+}
+
+/* Deprecated */
+APR_DECLARE(apr_status_t) apr_explode_localtime(apr_time_exp_t *result, 
+                                                apr_time_t input)
+{
+    return apr_time_exp_lt(result, input);
+}
+
+/* Deprecated */
+APR_DECLARE(apr_status_t) apr_implode_gmt(apr_time_t *t,
+                                          apr_time_exp_t *xt)
+{
+    return apr_time_exp_gmt_get(t, xt);
+}
+