delete app

Change-Id: Id4c572809969ebe89e946e88063eaed262cff3f2
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 0 insertions, 766 deletions

diff --git a/rubbos/app/httpd-2.0.64/srclib/apr/include/apr_file_io.h b/rubbos/app/httpd-2.0.64/srclib/apr/include/apr_file_io.h
deleted file mode 100644
index bfa7a1bf..00000000
--- a/rubbos/app/httpd-2.0.64/srclib/apr/include/apr_file_io.h
+++ /dev/null
@@ -1,766 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef APR_FILE_IO_H
-#define APR_FILE_IO_H
-
-/**
- * @file apr_file_io.h
- * @brief APR File I/O Handling
- */
-
-#include "apr.h"
-#include "apr_pools.h"
-#include "apr_time.h"
-#include "apr_errno.h"
-#include "apr_file_info.h"
-#include "apr_inherit.h"
-
-#define APR_WANT_STDIO          /**< for SEEK_* */
-#define APR_WANT_IOVEC          /**< for apr_file_writev */
-#include "apr_want.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @defgroup apr_file_io File I/O Handling Functions
- * @ingroup APR 
- * @{
- */
-
-/**
- * @defgroup apr_file_open_flags File Open Flags/Routines
- * @{
- */
-
-/* Note to implementors: Values in the range 0x00100000--0x80000000
-   are reserved for platform-specific values. */
-
-#define APR_READ       0x00001     /**< Open the file for reading */
-#define APR_WRITE      0x00002     /**< Open the file for writing */
-#define APR_CREATE     0x00004     /**< Create the file if not there */
-#define APR_APPEND     0x00008     /**< Append to the end of the file */
-#define APR_TRUNCATE   0x00010     /**< Open the file and truncate to 0 length */
-#define APR_BINARY     0x00020     /**< Open the file in binary mode */
-#define APR_EXCL       0x00040     /**< Open should fail if APR_CREATE and file
-                                        exists. */
-#define APR_BUFFERED   0x00080     /**< Open the file for buffered I/O */
-#define APR_DELONCLOSE 0x00100     /**< Delete the file after close */
-#define APR_XTHREAD    0x00200     /**< Platform dependent tag to open the file
-                                        for use across multiple threads */
-#define APR_SHARELOCK  0x00400     /**< Platform dependent support for higher
-                                        level locked read/write access to support
-                                        writes across process/machines */
-#define APR_FILE_NOCLEANUP 0x00800 /**< Do not register a cleanup when the file
-                                        is opened */
-#define APR_SENDFILE_ENABLED 0x01000 /**< Advisory flag that this file should
-                                          support apr_sendfile operation */
-#define APR_LARGEFILE   0x04000    /**< Platform dependent flag to enable large file
-                                        support; WARNING see below. */
-
-/** @warning The APR_LARGEFILE flag only has effect on some platforms
- * where sizeof(apr_off_t) == 4.  Where implemented, it allows opening
- * and writing to a file which exceeds the size which can be
- * represented by apr_off_t (2 gigabytes).  When a file's size does
- * exceed 2Gb, apr_file_info_get() will fail with an error on the
- * descriptor, likewise apr_stat()/apr_lstat() will fail on the
- * filename.  apr_dir_read() will fail with APR_INCOMPLETE on a
- * directory entry for a large file depending on the particular
- * APR_FINFO_* flags.  Generally, it is not recommended to use this
- * flag. */
-
-/** @} */
-
-/**
- * @defgroup apr_file_seek_flags File Seek Flags
- * @{
- */
-
-/* flags for apr_file_seek */
-/** Set the file position */
-#define APR_SET SEEK_SET
-/** Current */
-#define APR_CUR SEEK_CUR
-/** Go to end of file */
-#define APR_END SEEK_END
-/** @} */
-
-/**
- * @defgroup apr_file_attrs_set_flags File Attribute Flags
- * @{
- */
-
-/* flags for apr_file_attrs_set */
-#define APR_FILE_ATTR_READONLY   0x01          /**< File is read-only */
-#define APR_FILE_ATTR_EXECUTABLE 0x02          /**< File is executable */
-#define APR_FILE_ATTR_HIDDEN     0x04          /**< File is hidden */
-/** @} */
-
-/** File attributes */
-typedef apr_uint32_t apr_fileattrs_t;
-
-/** should be same as whence type in lseek, POSIX defines this as int */
-typedef int       apr_seek_where_t;
-
-/**
- * Structure for referencing files.
- */
-typedef struct apr_file_t         apr_file_t;
-
-/* File lock types/flags */
-/**
- * @defgroup apr_file_lock_types File Lock Types
- * @{
- */
-
-#define APR_FLOCK_SHARED        1       /**< Shared lock. More than one process
-                                           or thread can hold a shared lock
-                                           at any given time. Essentially,
-                                           this is a "read lock", preventing
-                                           writers from establishing an
-                                           exclusive lock. */
-#define APR_FLOCK_EXCLUSIVE     2       /**< Exclusive lock. Only one process
-                                           may hold an exclusive lock at any
-                                           given time. This is analogous to
-                                           a "write lock". */
-
-#define APR_FLOCK_TYPEMASK      0x000F  /**< mask to extract lock type */
-#define APR_FLOCK_NONBLOCK      0x0010  /**< do not block while acquiring the
-                                           file lock */
-/** @} */
-
-/**
- * Open the specified file.
- * @param newf The opened file descriptor.
- * @param fname The full path to the file (using / on all systems)
- * @param flag Or'ed value of:
- * <PRE>
- *         APR_READ              open for reading
- *         APR_WRITE             open for writing
- *         APR_CREATE            create the file if not there
- *         APR_APPEND            file ptr is set to end prior to all writes
- *         APR_TRUNCATE          set length to zero if file exists
- *         APR_BINARY            not a text file (This flag is ignored on 
- *                               UNIX because it has no meaning)
- *         APR_BUFFERED          buffer the data.  Default is non-buffered
- *         APR_EXCL              return error if APR_CREATE and file exists
- *         APR_DELONCLOSE        delete the file after closing.
- *         APR_XTHREAD           Platform dependent tag to open the file
- *                               for use across multiple threads
- *         APR_SHARELOCK         Platform dependent support for higher
- *                               level locked read/write access to support
- *                               writes across process/machines
- *         APR_FILE_NOCLEANUP    Do not register a cleanup with the pool 
- *                               passed in on the <EM>cont</EM> argument (see below).
- *                               The apr_os_file_t handle in apr_file_t will not
- *                               be closed when the pool is destroyed.
- *         APR_SENDFILE_ENABLED  Open with appropriate platform semantics
- *                               for sendfile operations.  Advisory only,
- *                               apr_sendfile does not check this flag.
- * </PRE>
- * @param perm Access permissions for file.
- * @param pool The pool to use.
- * @remark If perm is APR_OS_DEFAULT and the file is being created, appropriate 
- *      default permissions will be used.  *arg1 must point to a valid file_t, 
- *      or NULL (in which case it will be allocated)
- */
-APR_DECLARE(apr_status_t) apr_file_open(apr_file_t **newf, const char *fname,
-                                   apr_int32_t flag, apr_fileperms_t perm,
-                                   apr_pool_t *pool);
-
-/**
- * Close the specified file.
- * @param file The file descriptor to close.
- */
-APR_DECLARE(apr_status_t) apr_file_close(apr_file_t *file);
-
-/**
- * delete the specified file.
- * @param path The full path to the file (using / on all systems)
- * @param cont The pool to use.
- * @remark If the file is open, it won't be removed until all instances are closed.
- */
-APR_DECLARE(apr_status_t) apr_file_remove(const char *path, apr_pool_t *cont);
-
-/**
- * rename the specified file.
- * @param from_path The full path to the original file (using / on all systems)
- * @param to_path The full path to the new file (using / on all systems)
- * @param pool The pool to use.
- * @warning If a file exists at the new location, then it will be overwritten.  
- *      Moving files or directories across devices may not be possible.
- */
-APR_DECLARE(apr_status_t) apr_file_rename(const char *from_path, 
-                                          const char *to_path,
-                                          apr_pool_t *pool);
-
-/**
- * copy the specified file to another file.
- * @param from_path The full path to the original file (using / on all systems)
- * @param to_path The full path to the new file (using / on all systems)
- * @param perms Access permissions for the new file if it is created.
- *     In place of the usual or'd combination of file permissions, the
- *     value APR_FILE_SOURCE_PERMS may be given, in which case the source
- *     file's permissions are copied.
- * @param pool The pool to use.
- * @remark The new file does not need to exist, it will be created if required.
- * @warning If the new file already exists, its contents will be overwritten.
- */
-APR_DECLARE(apr_status_t) apr_file_copy(const char *from_path, 
-                                        const char *to_path,
-                                        apr_fileperms_t perms,
-                                        apr_pool_t *pool);
-
-/**
- * append the specified file to another file.
- * @param from_path The full path to the source file (using / on all systems)
- * @param to_path The full path to the destination file (using / on all systems)
- * @param perms Access permissions for the destination file if it is created.
- *     In place of the usual or'd combination of file permissions, the
- *     value APR_FILE_SOURCE_PERMS may be given, in which case the source
- *     file's permissions are copied.
- * @param pool The pool to use.
- * @remark The new file does not need to exist, it will be created if required.
- */
-APR_DECLARE(apr_status_t) apr_file_append(const char *from_path, 
-                                          const char *to_path,
-                                          apr_fileperms_t perms,
-                                          apr_pool_t *pool);
-
-/**
- * Are we at the end of the file
- * @param fptr The apr file we are testing.
- * @remark Returns APR_EOF if we are at the end of file, APR_SUCCESS otherwise.
- */
-APR_DECLARE(apr_status_t) apr_file_eof(apr_file_t *fptr);
-
-/**
- * open standard error as an apr file pointer.
- * @param thefile The apr file to use as stderr.
- * @param cont The pool to allocate the file out of.
- * 
- * @remark The only reason that the apr_file_open_std* functions exist
- * is that you may not always have a stderr/out/in on Windows.  This
- * is generally a problem with newer versions of Windows and services.
- * 
- * The other problem is that the C library functions generally work
- * differently on Windows and Unix.  So, by using apr_file_open_std*
- * functions, you can get a handle to an APR struct that works with
- * the APR functions which are supposed to work identically on all
- * platforms.
- */
-APR_DECLARE(apr_status_t) apr_file_open_stderr(apr_file_t **thefile,
-                                          apr_pool_t *cont);
-
-/**
- * open standard output as an apr file pointer.
- * @param thefile The apr file to use as stdout.
- * @param cont The pool to allocate the file out of.
- * 
- * @remark The only reason that the apr_file_open_std* functions exist
- * is that you may not always have a stderr/out/in on Windows.  This
- * is generally a problem with newer versions of Windows and services.
- * 
- * The other problem is that the C library functions generally work
- * differently on Windows and Unix.  So, by using apr_file_open_std*
- * functions, you can get a handle to an APR struct that works with
- * the APR functions which are supposed to work identically on all
- * platforms.
- */
-APR_DECLARE(apr_status_t) apr_file_open_stdout(apr_file_t **thefile,
-                                          apr_pool_t *cont);
-
-/**
- * open standard input as an apr file pointer.
- * @param thefile The apr file to use as stdin.
- * @param cont The pool to allocate the file out of.
- * 
- * @remark The only reason that the apr_file_open_std* functions exist
- * is that you may not always have a stderr/out/in on Windows.  This
- * is generally a problem with newer versions of Windows and services.
- * 
- * The other problem is that the C library functions generally work
- * differently on Windows and Unix.  So, by using apr_file_open_std*
- * functions, you can get a handle to an APR struct that works with
- * the APR functions which are supposed to work identically on all
- * platforms.
- */
-APR_DECLARE(apr_status_t) apr_file_open_stdin(apr_file_t **thefile,
-                                              apr_pool_t *cont);
-
-/**
- * Read data from the specified file.
- * @param thefile The file descriptor to read from.
- * @param buf The buffer to store the data to.
- * @param nbytes On entry, the number of bytes to read; on exit, the number of bytes read.
- * @remark apr_file_read will read up to the specified number of bytes, but 
- *         never more.  If there isn't enough data to fill that number of 
- *         bytes, all of the available data is read.  The third argument is 
- *         modified to reflect the number of bytes read.  If a char was put 
- *         back into the stream via ungetc, it will be the first character 
- *         returned. 
- *
- *         It is not possible for both bytes to be read and an APR_EOF or other 
- *         error to be returned.
- *
- *         APR_EINTR is never returned.
- */
-APR_DECLARE(apr_status_t) apr_file_read(apr_file_t *thefile, void *buf,
-                                   apr_size_t *nbytes);
-
-/**
- * Write data to the specified file.
- * @param thefile The file descriptor to write to.
- * @param buf The buffer which contains the data.
- * @param nbytes On entry, the number of bytes to write; on exit, the number 
- *               of bytes written.
- * @remark apr_file_write will write up to the specified number of bytes, but never 
- *      more.  If the OS cannot write that many bytes, it will write as many 
- *      as it can.  The third argument is modified to reflect the * number 
- *      of bytes written. 
- *
- *      It is possible for both bytes to be written and an error to be returned.
- *
- *      APR_EINTR is never returned.
- */
-APR_DECLARE(apr_status_t) apr_file_write(apr_file_t *thefile, const void *buf,
-                                    apr_size_t *nbytes);
-
-/**
- * Write data from iovec array to the specified file.
- * @param thefile The file descriptor to write to.
- * @param vec The array from which to get the data to write to the file.
- * @param nvec The number of elements in the struct iovec array. This must 
- *             be smaller than APR_MAX_IOVEC_SIZE.  If it isn't, the function 
- *             will fail with APR_EINVAL.
- * @param nbytes The number of bytes written.
- * @remark It is possible for both bytes to be written and an error to be returned.
- *      APR_EINTR is never returned.
- *
- *      apr_file_writev is available even if the underlying operating system 
- *
- *      doesn't provide writev().
- */
-APR_DECLARE(apr_status_t) apr_file_writev(apr_file_t *thefile,
-                                     const struct iovec *vec,
-                                     apr_size_t nvec, apr_size_t *nbytes);
-
-/**
- * Read data from the specified file, ensuring that the buffer is filled
- * before returning.
- * @param thefile The file descriptor to read from.
- * @param buf The buffer to store the data to.
- * @param nbytes The number of bytes to read.
- * @param bytes_read If non-NULL, this will contain the number of bytes read.
- * @remark apr_file_read will read up to the specified number of bytes, but never 
- *      more.  If there isn't enough data to fill that number of bytes, 
- *      then the process/thread will block until it is available or EOF 
- *      is reached.  If a char was put back into the stream via ungetc, 
- *      it will be the first character returned. 
- *
- *      It is possible for both bytes to be read and an error to be 
- *      returned.  And if *bytes_read is less than nbytes, an
- *      accompanying error is _always_ returned.
- *
- *      APR_EINTR is never returned.
- */
-APR_DECLARE(apr_status_t) apr_file_read_full(apr_file_t *thefile, void *buf,
-                                        apr_size_t nbytes,
-                                        apr_size_t *bytes_read);
-
-/**
- * Write data to the specified file, ensuring that all of the data is
- * written before returning.
- * @param thefile The file descriptor to write to.
- * @param buf The buffer which contains the data.
- * @param nbytes The number of bytes to write.
- * @param bytes_written If non-NULL, this will contain the number of bytes written.
- * @remark apr_file_write will write up to the specified number of bytes, but never 
- *      more.  If the OS cannot write that many bytes, the process/thread 
- *      will block until they can be written. Exceptional error such as 
- *      "out of space" or "pipe closed" will terminate with an error.
- *
- *      It is possible for both bytes to be written and an error to be 
- *      returned.  And if *bytes_written is less than nbytes, an
- *      accompanying error is _always_ returned.
- *
- *      APR_EINTR is never returned.
- */
-APR_DECLARE(apr_status_t) apr_file_write_full(apr_file_t *thefile, const void *buf,
-                                         apr_size_t nbytes, 
-                                         apr_size_t *bytes_written);
-
-/**
- * put a character into the specified file.
- * @param ch The character to write.
- * @param thefile The file descriptor to write to
- */
-APR_DECLARE(apr_status_t) apr_file_putc(char ch, apr_file_t *thefile);
-
-/**
- * get a character from the specified file.
- * @param ch The character to read into
- * @param thefile The file descriptor to read from
- */
-APR_DECLARE(apr_status_t) apr_file_getc(char *ch, apr_file_t *thefile);
-
-/**
- * put a character back onto a specified stream.
- * @param ch The character to write.
- * @param thefile The file descriptor to write to
- */
-APR_DECLARE(apr_status_t) apr_file_ungetc(char ch, apr_file_t *thefile);
-
-/**
- * Get a string from a specified file.
- * @param str The buffer to store the string in. 
- * @param len The length of the string
- * @param thefile The file descriptor to read from
- * @remark The buffer will be '\0'-terminated if any characters are stored.
- */
-APR_DECLARE(apr_status_t) apr_file_gets(char *str, int len, apr_file_t *thefile);
-
-/**
- * Put the string into a specified file.
- * @param str The string to write. 
- * @param thefile The file descriptor to write to
- */
-APR_DECLARE(apr_status_t) apr_file_puts(const char *str, apr_file_t *thefile);
-
-/**
- * Flush the file's buffer.
- * @param thefile The file descriptor to flush
- */
-APR_DECLARE(apr_status_t) apr_file_flush(apr_file_t *thefile);
-
-/**
- * duplicate the specified file descriptor.
- * @param new_file The structure to duplicate into. 
- * @param old_file The file to duplicate.
- * @param p The pool to use for the new file.
- * @remark *new_file must point to a valid apr_file_t, or point to NULL
- */         
-APR_DECLARE(apr_status_t) apr_file_dup(apr_file_t **new_file,
-                                      apr_file_t *old_file,
-                                      apr_pool_t *p);
-
-/**
- * duplicate the specified file descriptor and close the original
- * @param new_file The old file that is to be closed and reused
- * @param old_file The file to duplicate
- * @param p        The pool to use for the new file
- *
- * @remark new_file MUST point at a valid apr_file_t. It cannot be NULL
- */
-APR_DECLARE(apr_status_t) apr_file_dup2(apr_file_t *new_file,
-                                        apr_file_t *old_file,
-                                        apr_pool_t *p);
-
-/**
- * move the specified file descriptor to a new pool
- * @param new_file Pointer in which to return the new apr_file_t
- * @param old_file The file to move
- * @param p        The pool to which the descriptor is to be moved
- * @remark Unlike apr_file_dup2(), this function doesn't do an
- *         OS dup() operation on the underlying descriptor; it just
- *         moves the descriptor's apr_file_t wrapper to a new pool.
- * @remark The new pool need not be an ancestor of old_file's pool.
- * @remark After calling this function, old_file may not be used
- */
-APR_DECLARE(apr_status_t) apr_file_setaside(apr_file_t **new_file,
-                                            apr_file_t *old_file,
-                                            apr_pool_t *p);
-
-/**
- * Move the read/write file offset to a specified byte within a file.
- * @param thefile The file descriptor
- * @param where How to move the pointer, one of:
- * <PRE>
- *            APR_SET  --  set the offset to offset
- *            APR_CUR  --  add the offset to the current position 
- *            APR_END  --  add the offset to the current file size 
- * </PRE>
- * @param offset The offset to move the pointer to.
- * @remark The third argument is modified to be the offset the pointer
-          was actually moved to.
- */
-APR_DECLARE(apr_status_t) apr_file_seek(apr_file_t *thefile, 
-                                   apr_seek_where_t where,
-                                   apr_off_t *offset);
-
-/**
- * Create an anonymous pipe.
- * @param in The file descriptor to use as input to the pipe.
- * @param out The file descriptor to use as output from the pipe.
- * @param cont The pool to operate on.
- */
-APR_DECLARE(apr_status_t) apr_file_pipe_create(apr_file_t **in, apr_file_t **out,
-                                          apr_pool_t *cont);
-
-/**
- * Create a named pipe.
- * @param filename The filename of the named pipe
- * @param perm The permissions for the newly created pipe.
- * @param cont The pool to operate on.
- */
-APR_DECLARE(apr_status_t) apr_file_namedpipe_create(const char *filename, 
-                                               apr_fileperms_t perm, 
-                                               apr_pool_t *cont);
-
-/**
- * Get the timeout value for a pipe or manipulate the blocking state.
- * @param thepipe The pipe we are getting a timeout for.
- * @param timeout The current timeout value in microseconds. 
- */
-APR_DECLARE(apr_status_t) apr_file_pipe_timeout_get(apr_file_t *thepipe, 
-                                               apr_interval_time_t *timeout);
-
-/**
- * Set the timeout value for a pipe or manipulate the blocking state.
- * @param thepipe The pipe we are setting a timeout on.
- * @param timeout The timeout value in microseconds.  Values < 0 mean wait 
- *        forever, 0 means do not wait at all.
- */
-APR_DECLARE(apr_status_t) apr_file_pipe_timeout_set(apr_file_t *thepipe, 
-                                               apr_interval_time_t timeout);
-
-/** file (un)locking functions. */
-
-/**
- * Establish a lock on the specified, open file. The lock may be advisory
- * or mandatory, at the discretion of the platform. The lock applies to
- * the file as a whole, rather than a specific range. Locks are established
- * on a per-thread/process basis; a second lock by the same thread will not
- * block.
- * @param thefile The file to lock.
- * @param type The type of lock to establish on the file.
- */
-APR_DECLARE(apr_status_t) apr_file_lock(apr_file_t *thefile, int type);
-
-/**
- * Remove any outstanding locks on the file.
- * @param thefile The file to unlock.
- */
-APR_DECLARE(apr_status_t) apr_file_unlock(apr_file_t *thefile);
-
-/**accessor and general file_io functions. */
-
-/**
- * return the file name of the current file.
- * @param new_path The path of the file.  
- * @param thefile The currently open file.
- */                     
-APR_DECLARE(apr_status_t) apr_file_name_get(const char **new_path, 
-                                           apr_file_t *thefile);
-
-/**
- * Return the data associated with the current file.
- * @param data The user data associated with the file.  
- * @param key The key to use for retreiving data associated with this file.
- * @param file The currently open file.
- */                     
-APR_DECLARE(apr_status_t) apr_file_data_get(void **data, const char *key, 
-                                           apr_file_t *file);
-
-/**
- * Set the data associated with the current file.
- * @param file The currently open file.
- * @param data The user data to associate with the file.  
- * @param key The key to use for assocaiteing data with the file.
- * @param cleanup The cleanup routine to use when the file is destroyed.
- */                     
-APR_DECLARE(apr_status_t) apr_file_data_set(apr_file_t *file, void *data,
-                                           const char *key,
-                                           apr_status_t (*cleanup)(void *));
-
-/**
- * Write a string to a file using a printf format.
- * @param fptr The file to write to.
- * @param format The format string
- * @param ... The values to substitute in the format string
- * @return The number of bytes written
- */ 
-APR_DECLARE_NONSTD(int) apr_file_printf(apr_file_t *fptr, 
-                                        const char *format, ...)
-        __attribute__((format(printf,2,3)));
-
-/**
- * set the specified file's permission bits.
- * @param fname The file (name) to apply the permissions to.
- * @param perms The permission bits to apply to the file.
- * @warning Some platforms may not be able to apply all of the available 
- *      permission bits; APR_INCOMPLETE will be returned if some permissions 
- *      are specified which could not be set.
- *
- *      Platforms which do not implement this feature will return APR_ENOTIMPL.
- */
-APR_DECLARE(apr_status_t) apr_file_perms_set(const char *fname,
-                                           apr_fileperms_t perms);
-
-/**
- * Set attributes of the specified file.
- * @param fname The full path to the file (using / on all systems)
- * @param attributes Or'd combination of
- * <PRE>
- *            APR_FILE_ATTR_READONLY   - make the file readonly
- *            APR_FILE_ATTR_EXECUTABLE - make the file executable
- *            APR_FILE_ATTR_HIDDEN     - make the file hidden
- * </PRE>
- * @param attr_mask Mask of valid bits in attributes.
- * @param cont the pool to use.
- * @remark This function should be used in preference to explict manipulation
- *      of the file permissions, because the operations to provide these
- *      attributes are platform specific and may involve more than simply
- *      setting permission bits.
- * @warning Platforms which do not implement this feature will return
- *      APR_ENOTIMPL.
- */
-APR_DECLARE(apr_status_t) apr_file_attrs_set(const char *fname,
-                                             apr_fileattrs_t attributes,
-                                             apr_fileattrs_t attr_mask,
-                                             apr_pool_t *cont);
-
-/**
- * Set the mtime of the specified file.
- * @param fname The full path to the file (using / on all systems)
- * @param mtime The mtime to apply to the file.
- * @param pool The pool to use.
- * @warning Platforms which do not implement this feature will return
- *      APR_ENOTIMPL.
- */
-APR_DECLARE(apr_status_t) apr_file_mtime_set(const char *fname,
-                                             apr_time_t mtime,
-                                             apr_pool_t *pool);
-
-/**
- * Create a new directory on the file system.
- * @param path the path for the directory to be created.  (use / on all systems)
- * @param perm Permissions for the new direcoty.
- * @param cont the pool to use.
- */                        
-APR_DECLARE(apr_status_t) apr_dir_make(const char *path, apr_fileperms_t perm, 
-                        apr_pool_t *cont);
-
-/** Creates a new directory on the file system, but behaves like
- * 'mkdir -p'. Creates intermediate directories as required. No error
- * will be reported if PATH already exists.
- * @param path the path for the directory to be created.  (use / on all systems)
- * @param perm Permissions for the new direcoty.
- * @param pool the pool to use.
- */
-APR_DECLARE(apr_status_t) apr_dir_make_recursive(const char *path,
-                                                 apr_fileperms_t perm,
-                                                 apr_pool_t *pool);
-
-/**
- * Remove directory from the file system.
- * @param path the path for the directory to be removed.  (use / on all systems)
- * @param cont the pool to use.
- */                        
-APR_DECLARE(apr_status_t) apr_dir_remove(const char *path, apr_pool_t *cont);
-
-/**
- * get the specified file's stats.
- * @param finfo Where to store the information about the file.
- * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ values 
- * @param thefile The file to get information about.
- */ 
-APR_DECLARE(apr_status_t) apr_file_info_get(apr_finfo_t *finfo, 
-                                          apr_int32_t wanted,
-                                          apr_file_t *thefile);
-
-
-/**
- * Truncate the file's length to the specified offset
- * @param fp The file to truncate
- * @param offset The offset to truncate to.
- * @remark The read/write file offset is repositioned to offset.
- */
-APR_DECLARE(apr_status_t) apr_file_trunc(apr_file_t *fp, apr_off_t offset);
-
-/**
- * Retrieve the flags that were passed into apr_file_open()
- * when the file was opened.
- * @return apr_int32_t the flags
- */
-APR_DECLARE(apr_int32_t) apr_file_flags_get(apr_file_t *f);
-
-/**
- * Get the pool used by the file.
- */
-APR_POOL_DECLARE_ACCESSOR(file);
-
-/**
- * Set a file to be inherited by child processes.
- *
- */
-APR_DECLARE_INHERIT_SET(file);
-
-/** @deprecated @see apr_file_inherit_set */
-APR_DECLARE(void) apr_file_set_inherit(apr_file_t *file);
-
-/**
- * Unset a file from being inherited by child processes.
- */
-APR_DECLARE_INHERIT_UNSET(file);
-
-/** @deprecated @see apr_file_inherit_unset */
-APR_DECLARE(void) apr_file_unset_inherit(apr_file_t *file);
-
-/**
- * Open a temporary file
- * @param fp The apr file to use as a temporary file.
- * @param templ The template to use when creating a temp file.
- * @param flags The flags to open the file with. If this is zero,
- *              the file is opened with 
- *              APR_CREATE | APR_READ | APR_WRITE | APR_EXCL | APR_DELONCLOSE
- * @param p The pool to allocate the file out of.
- * @remark   
- * This function  generates  a unique temporary file name from template.  
- * The last six characters of template must be XXXXXX and these are replaced 
- * with a string that makes the filename unique. Since it will  be  modified,
- * template must not be a string constant, but should be declared as a character
- * array.  
- *
- */
-APR_DECLARE(apr_status_t) apr_file_mktemp(apr_file_t **fp, char *templ,
-                                          apr_int32_t flags, apr_pool_t *p);
-
-
-/**
- * Find an existing directory suitable as a temporary storage location.
- * @param temp_dir The temp directory.
- * @param p The pool to use for any necessary allocations.
- * @remark   
- * This function uses an algorithm to search for a directory that an
- * an application can use for temporary storage.  Once such a
- * directory is found, that location is cached by the library.  Thus,
- * callers only pay the cost of this algorithm once if that one time
- * is successful.
- *
- */
-APR_DECLARE(apr_status_t) apr_temp_dir_get(const char **temp_dir, 
-                                           apr_pool_t *p);
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* ! APR_FILE_IO_H */