upload http

JIRA: BOTTLENECK-10

Change-Id: I7598427ff904df438ce77c2819ee48ac75ffa8da
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 243 insertions, 0 deletions

diff --git a/rubbos/app/httpd-2.0.64/server/rfc1413.c b/rubbos/app/httpd-2.0.64/server/rfc1413.c
new file mode 100644
index 00000000..755bd917
--- /dev/null
+++ b/rubbos/app/httpd-2.0.64/server/rfc1413.c
@@ -0,0 +1,243 @@
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License.  You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* TODO - put timeouts back in */
+/*
+ * rfc1413() speaks a common subset of the RFC 1413, AUTH, TAP and IDENT
+ * protocols. The code queries an RFC 1413 etc. compatible daemon on a remote
+ * host to look up the owner of a connection. The information should not be
+ * used for authentication purposes. This routine intercepts alarm signals.
+ * 
+ * Diagnostics are reported through syslog(3).
+ * 
+ * Author: Wietse Venema, Eindhoven University of Technology,
+ * The Netherlands.
+ */
+
+/* Some small additions for Apache --- ditch the "sccsid" var if
+ * compiling with gcc (it *has* changed), include ap_config.h for the
+ * prototypes it defines on at least one system (SunlOSs) which has
+ * them missing from the standard header files, and one minor change
+ * below (extra parens around assign "if (foo = bar) ..." to shut up
+ * gcc -Wall).
+ */
+
+/* Rewritten by David Robinson */
+
+#include "apr.h"
+#include "apr_network_io.h"
+#include "apr_strings.h"
+#include "apr_lib.h"
+#include "apr_inherit.h"
+
+#define APR_WANT_STDIO
+#define APR_WANT_STRFUNC
+#include "apr_want.h"
+
+#include "ap_config.h"
+#include "httpd.h"		/* for server_rec, conn_rec, etc. */
+#include "http_log.h"		/* for aplog_error */
+#include "rfc1413.h"
+#include "http_main.h"		/* set_callback_and_alarm */
+#include "util_ebcdic.h"
+
+/* Local stuff. */
+/* Semi-well-known port */
+#define	RFC1413_PORT	113
+/* maximum allowed length of userid */
+#define RFC1413_USERLEN 512
+/* rough limit on the amount of data we accept. */
+#define RFC1413_MAXDATA 1000
+
+#ifndef RFC1413_TIMEOUT
+#define RFC1413_TIMEOUT	30
+#endif
+#define FROM_UNKNOWN  "unknown"
+
+int ap_rfc1413_timeout = RFC1413_TIMEOUT;	/* Global so it can be changed */
+
+static apr_status_t rfc1413_connect(apr_socket_t **newsock, conn_rec *conn,
+                                    server_rec *srv)
+{
+    apr_status_t rv;
+    apr_sockaddr_t *localsa, *destsa;
+
+    if ((rv = apr_sockaddr_info_get(&localsa, conn->local_ip, APR_UNSPEC, 
+                              0, /* ephemeral port */
+                              0, conn->pool)) != APR_SUCCESS) {
+        /* This should not fail since we have a numeric address string
+         * as the host. */
+        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, srv,
+                     "rfc1413: apr_sockaddr_info_get(%s) failed",
+                     conn->local_ip);
+        return rv;
+    }
+    
+    if ((rv = apr_sockaddr_info_get(&destsa, conn->remote_ip, 
+                              localsa->family, /* has to match */
+                              RFC1413_PORT, 0, conn->pool)) != APR_SUCCESS) {
+        /* This should not fail since we have a numeric address string
+         * as the host. */
+        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, srv,
+                     "rfc1413: apr_sockaddr_info_get(%s) failed",
+                     conn->remote_ip);
+        return rv;
+    }
+
+    if ((rv = apr_socket_create(newsock, 
+                                localsa->family, /* has to match */
+                                SOCK_STREAM, conn->pool)) != APR_SUCCESS) {
+	ap_log_error(APLOG_MARK, APLOG_CRIT, rv, srv,
+                     "rfc1413: error creating query socket");
+        return rv;
+    }
+
+    if ((rv = apr_socket_timeout_set(*newsock, apr_time_from_sec(ap_rfc1413_timeout)))
+            != APR_SUCCESS) {
+        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, srv,
+                     "rfc1413: error setting query socket timeout");
+        apr_socket_close(*newsock);
+        return rv;
+    }
+
+/*
+ * Bind the local and remote ends of the query socket to the same
+ * IP addresses as the connection under investigation. We go
+ * through all this trouble because the local or remote system
+ * might have more than one network address. The RFC1413 etc.
+ * client sends only port numbers; the server takes the IP
+ * addresses from the query socket.
+ */
+
+    if ((rv = apr_bind(*newsock, localsa)) != APR_SUCCESS) {
+	ap_log_error(APLOG_MARK, APLOG_CRIT, rv, srv,
+                     "rfc1413: Error binding query socket to local port");
+        apr_socket_close(*newsock);
+	return rv;
+    }
+
+/*
+ * errors from connect usually imply the remote machine doesn't support
+ * the service; don't log such an error
+ */
+    if ((rv = apr_connect(*newsock, destsa)) != APR_SUCCESS) {
+        apr_socket_close(*newsock);
+        return rv;
+    }
+
+    return APR_SUCCESS;
+}
+
+static apr_status_t rfc1413_query(apr_socket_t *sock, conn_rec *conn, 
+                                  server_rec *srv)
+{
+    apr_port_t rmt_port, our_port;
+    apr_port_t sav_rmt_port, sav_our_port;
+    apr_size_t i;
+    char *cp;
+    char buffer[RFC1413_MAXDATA + 1];
+    char user[RFC1413_USERLEN + 1];	/* XXX */
+    apr_size_t buflen;
+
+    apr_sockaddr_port_get(&sav_our_port, conn->local_addr);
+    apr_sockaddr_port_get(&sav_rmt_port, conn->remote_addr);
+
+    /* send the data */
+    buflen = apr_snprintf(buffer, sizeof(buffer), "%hu,%hu\r\n", sav_rmt_port,
+                          sav_our_port);
+    ap_xlate_proto_to_ascii(buffer, buflen);
+
+    /* send query to server. Handle short write. */
+    i = 0;
+    while (i < buflen) {
+        apr_size_t j = strlen(buffer + i);
+        apr_status_t status;
+	status  = apr_send(sock, buffer+i, &j);
+	if (status != APR_SUCCESS) {
+	    ap_log_error(APLOG_MARK, APLOG_CRIT, status, srv,
+		         "write: rfc1413: error sending request");
+	    return status;
+	}
+	else if (j > 0) {
+	    i+=j; 
+	}
+    }
+
+    /*
+     * Read response from server. - the response should be newline 
+     * terminated according to rfc - make sure it doesn't stomp its
+     * way out of the buffer.
+     */
+
+    i = 0;
+    memset(buffer, '\0', sizeof(buffer));
+    /*
+     * Note that the strchr function below checks for \012 instead of '\n'
+     * this allows it to work on both ASCII and EBCDIC machines.
+     */
+    while((cp = strchr(buffer, '\012')) == NULL && i < sizeof(buffer) - 1) {
+        apr_size_t j = sizeof(buffer) - 1 - i;
+        apr_status_t status;
+	status = apr_recv(sock, buffer+i, &j);
+	if (status != APR_SUCCESS) {
+	    ap_log_error(APLOG_MARK, APLOG_CRIT, status, srv,
+			"read: rfc1413: error reading response");
+	    return status;
+	}
+	else if (j > 0) {
+	    i+=j; 
+	}
+        else if (status == APR_SUCCESS && j == 0) {
+            /* Oops... we ran out of data before finding newline */
+            return APR_EINVAL;
+        }
+    }
+
+/* RFC1413_USERLEN = 512 */
+    ap_xlate_proto_from_ascii(buffer, i);
+    if (sscanf(buffer, "%hu , %hu : USERID :%*[^:]:%512s", &rmt_port, &our_port,
+	       user) != 3 || sav_rmt_port != rmt_port
+	|| sav_our_port != our_port)
+	return APR_EINVAL;
+
+    /*
+     * Strip trailing carriage return. It is part of the
+     * protocol, not part of the data.
+     */
+
+    if ((cp = strchr(user, '\r')))
+	*cp = '\0';
+
+    conn->remote_logname = apr_pstrdup(conn->pool, user);
+
+    return APR_SUCCESS;
+}
+
+char *ap_rfc1413(conn_rec *conn, server_rec *srv)
+{
+    apr_socket_t *sock;
+    apr_status_t rv;
+
+    rv = rfc1413_connect(&sock, conn, srv);
+    if (rv == APR_SUCCESS) {
+        rv = rfc1413_query(sock, conn, srv);
+        apr_socket_close(sock);
+    }
+    if (rv != APR_SUCCESS) {
+        conn->remote_logname = FROM_UNKNOWN;
+    }
+    return conn->remote_logname;
+}