delete app

Change-Id: Id4c572809969ebe89e946e88063eaed262cff3f2
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 0 insertions, 2136 deletions

diff --git a/rubbos/app/httpd-2.0.64/server/mpm/worker/worker.c b/rubbos/app/httpd-2.0.64/server/mpm/worker/worker.c
deleted file mode 100644
index 6e0da647..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/worker/worker.c
+++ /dev/null
@@ -1,2136 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* The purpose of this MPM is to fix the design flaws in the threaded
- * model.  Because of the way that pthreads and mutex locks interact,
- * it is basically impossible to cleanly gracefully shutdown a child
- * process if multiple threads are all blocked in accept.  This model
- * fixes those problems.
- */
-
-#include "apr.h"
-#include "apr_portable.h"
-#include "apr_strings.h"
-#include "apr_file_io.h"
-#include "apr_thread_proc.h"
-#include "apr_signal.h"
-#include "apr_thread_mutex.h"
-#include "apr_proc_mutex.h"
-#include "apr_poll.h"
-#define APR_WANT_STRFUNC
-#include "apr_want.h"
-
-#if APR_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#if APR_HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#if APR_HAVE_SYS_WAIT_H
-#include <sys/wait.h> 
-#endif
-#ifdef HAVE_SYS_PROCESSOR_H
-#include <sys/processor.h> /* for bindprocessor() */
-#endif
-
-#if !APR_HAS_THREADS
-#error The Worker MPM requires APR threads, but they are unavailable.
-#endif
-
-#define CORE_PRIVATE 
- 
-#include "ap_config.h"
-#include "httpd.h" 
-#include "http_main.h" 
-#include "http_log.h" 
-#include "http_config.h"        /* for read_config */ 
-#include "http_core.h"          /* for get_remote_host */ 
-#include "http_connection.h"
-#include "ap_mpm.h"
-#include "pod.h"
-#include "mpm_common.h"
-#include "ap_listen.h"
-#include "scoreboard.h" 
-#include "fdqueue.h"
-#include "mpm_default.h"
-
-#include <signal.h>
-#include <limits.h>             /* for INT_MAX */
-
-/* Limit on the total --- clients will be locked out if more servers than
- * this are needed.  It is intended solely to keep the server from crashing
- * when things get out of hand.
- *
- * We keep a hard maximum number of servers, for two reasons --- first off,
- * in case something goes seriously wrong, we want to stop the fork bomb
- * short of actually crashing the machine we're running on by filling some
- * kernel table.  Secondly, it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_SERVER_LIMIT
-#define DEFAULT_SERVER_LIMIT 16
-#endif
-
-/* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_SERVER_LIMIT
-#define MAX_SERVER_LIMIT 20000
-#endif
-
-/* Limit on the threads per process.  Clients will be locked out if more than
- * this  * server_limit are needed.
- *
- * We keep this for one reason it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_THREAD_LIMIT
-#define DEFAULT_THREAD_LIMIT 64 
-#endif
-
-/* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_THREAD_LIMIT
-#define MAX_THREAD_LIMIT 20000
-#endif
-
-/*
- * Actual definitions of config globals
- */
-
-int ap_threads_per_child = 0;         /* Worker threads per child */
-static int ap_daemons_to_start = 0;
-static int min_spare_threads = 0;
-static int max_spare_threads = 0;
-static int ap_daemons_limit = 0;
-static int server_limit = DEFAULT_SERVER_LIMIT;
-static int first_server_limit;
-static int thread_limit = DEFAULT_THREAD_LIMIT;
-static int first_thread_limit;
-static int changed_limit_at_restart;
-static int dying = 0;
-static int workers_may_exit = 0;
-static int start_thread_may_exit = 0;
-static int listener_may_exit = 0;
-static int requests_this_child;
-static int num_listensocks = 0;
-static int resource_shortage = 0;
-static fd_queue_t *worker_queue;
-static fd_queue_info_t *worker_queue_info;
-static int mpm_state = AP_MPMQ_STARTING;
-static int sick_child_detected;
-
-/* The structure used to pass unique initialization info to each thread */
-typedef struct {
-    int pid;
-    int tid;
-    int sd;
-} proc_info;
-
-/* Structure used to pass information to the thread responsible for 
- * creating the rest of the threads.
- */
-typedef struct {
-    apr_thread_t **threads;
-    apr_thread_t *listener;
-    int child_num_arg;
-    apr_threadattr_t *threadattr;
-} thread_starter;
-
-#define ID_FROM_CHILD_THREAD(c, t)    ((c * thread_limit) + t)
-
-/*
- * The max child slot ever assigned, preserved across restarts.  Necessary
- * to deal with MaxClients changes across AP_SIG_GRACEFUL restarts.  We 
- * use this value to optimize routines that have to scan the entire 
- * scoreboard.
- */
-int ap_max_daemons_limit = -1;
-
-static ap_pod_t *pod;
-
-/* *Non*-shared http_main globals... */
-
-server_rec *ap_server_conf;
-
-/* The worker MPM respects a couple of runtime flags that can aid
- * in debugging. Setting the -DNO_DETACH flag will prevent the root process
- * from detaching from its controlling terminal. Additionally, setting
- * the -DONE_PROCESS flag (which implies -DNO_DETACH) will get you the
- * child_main loop running in the process which originally started up.
- * This gives you a pretty nice debugging environment.  (You'll get a SIGHUP
- * early in standalone_main; just continue through.  This is the server
- * trying to kill off any child processes which it might have lying
- * around --- Apache doesn't keep track of their pids, it just sends
- * SIGHUP to the process group, ignoring it in the root process.
- * Continue through and you'll be fine.).
- */
-
-static int one_process = 0;
-
-#ifdef DEBUG_SIGSTOP
-int raise_sigstop_flags;
-#endif
-
-static apr_pool_t *pconf;                 /* Pool for config stuff */
-static apr_pool_t *pchild;                /* Pool for httpd child stuff */
-
-static pid_t ap_my_pid; /* Linux getpid() doesn't work except in main 
-                           thread. Use this instead */
-static pid_t parent_pid;
-static apr_os_thread_t *listener_os_thread;
-
-/* Locks for accept serialization */
-static apr_proc_mutex_t *accept_mutex;
-
-#ifdef SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-#define SAFE_ACCEPT(stmt) (ap_listeners->next ? (stmt) : APR_SUCCESS)
-#else
-#define SAFE_ACCEPT(stmt) (stmt)
-#endif
-
-/* The LISTENER_SIGNAL signal will be sent from the main thread to the 
- * listener thread to wake it up for graceful termination (what a child 
- * process from an old generation does when the admin does "apachectl 
- * graceful").  This signal will be blocked in all threads of a child
- * process except for the listener thread.
- */
-#define LISTENER_SIGNAL     SIGHUP
-
-/* An array of socket descriptors in use by each thread used to
- * perform a non-graceful (forced) shutdown of the server. */
-static apr_socket_t **worker_sockets;
-
-static void close_worker_sockets(void)
-{
-    int i;
-    for (i = 0; i < ap_threads_per_child; i++) {
-        if (worker_sockets[i]) {
-            apr_socket_close(worker_sockets[i]);
-            worker_sockets[i] = NULL;
-        }
-    }
-}
-  
-static void wakeup_listener(void)
-{
-    listener_may_exit = 1;
-    if (!listener_os_thread) {
-        /* XXX there is an obscure path that this doesn't handle perfectly:
-         *     right after listener thread is created but before 
-         *     listener_os_thread is set, the first worker thread hits an
-         *     error and starts graceful termination
-         */
-        return;
-    }
-    /*
-     * we should just be able to "kill(ap_my_pid, LISTENER_SIGNAL)" on all
-     * platforms and wake up the listener thread since it is the only thread 
-     * with SIGHUP unblocked, but that doesn't work on Linux
-     */
-#ifdef HAVE_PTHREAD_KILL
-    pthread_kill(*listener_os_thread, LISTENER_SIGNAL);
-#else
-    kill(ap_my_pid, LISTENER_SIGNAL);
-#endif
-}
-
-#define ST_INIT              0
-#define ST_GRACEFUL          1
-#define ST_UNGRACEFUL        2
-
-static int terminate_mode = ST_INIT;
-
-static void signal_threads(int mode)
-{
-    if (terminate_mode == mode) {
-        return;
-    }
-    terminate_mode = mode;
-    mpm_state = AP_MPMQ_STOPPING;
-
-    /* in case we weren't called from the listener thread, wake up the
-     * listener thread
-     */
-    wakeup_listener();
-
-    /* for ungraceful termination, let the workers exit now;
-     * for graceful termination, the listener thread will notify the
-     * workers to exit once it has stopped accepting new connections
-     */
-    if (mode == ST_UNGRACEFUL) {
-        workers_may_exit = 1;
-        ap_queue_interrupt_all(worker_queue);
-        ap_queue_info_term(worker_queue_info);
-        close_worker_sockets(); /* forcefully kill all current connections */
-    }
-}
-
-AP_DECLARE(apr_status_t) ap_mpm_query(int query_code, int *result)
-{
-    switch(query_code){
-        case AP_MPMQ_MAX_DAEMON_USED:
-            *result = ap_max_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_THREADED:
-            *result = AP_MPMQ_STATIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_FORKED:
-            *result = AP_MPMQ_DYNAMIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_DAEMONS:
-            *result = server_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_THREADS:
-            *result = thread_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_THREADS:
-            *result = ap_threads_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_THREADS:    
-            *result = min_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_THREADS:
-            *result = max_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_REQUESTS_DAEMON:
-            *result = ap_max_requests_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_DAEMONS:
-            *result = ap_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MPM_STATE:
-            *result = mpm_state;
-            return APR_SUCCESS;
-    }
-    return APR_ENOTIMPL;
-}
-
-/* a clean exit from a child with proper cleanup */ 
-static void clean_child_exit(int code) __attribute__ ((noreturn));
-static void clean_child_exit(int code)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (pchild) {
-        apr_pool_destroy(pchild);
-    }
-    exit(code);
-}
-
-static void just_die(int sig)
-{
-    clean_child_exit(0);
-}
-
-/*****************************************************************
- * Connection structures and accounting...
- */
-
-/* volatile just in case */
-static int volatile shutdown_pending;
-static int volatile restart_pending;
-static int volatile is_graceful;
-static volatile int child_fatal;
-ap_generation_t volatile ap_my_generation;
-
-/*
- * ap_start_shutdown() and ap_start_restart(), below, are a first stab at
- * functions to initiate shutdown or restart without relying on signals. 
- * Previously this was initiated in sig_term() and restart() signal handlers, 
- * but we want to be able to start a shutdown/restart from other sources --
- * e.g. on Win32, from the service manager. Now the service manager can
- * call ap_start_shutdown() or ap_start_restart() as appropiate.  Note that
- * these functions can also be called by the child processes, since global
- * variables are no longer used to pass on the required action to the parent.
- *
- * These should only be called from the parent process itself, since the
- * parent process will use the shutdown_pending and restart_pending variables
- * to determine whether to shutdown or restart. The child process should
- * call signal_parent() directly to tell the parent to die -- this will
- * cause neither of those variable to be set, which the parent will
- * assume means something serious is wrong (which it will be, for the
- * child to force an exit) and so do an exit anyway.
- */
-
-static void ap_start_shutdown(void)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (shutdown_pending == 1) {
-        /* Um, is this _probably_ not an error, if the user has
-         * tried to do a shutdown twice quickly, so we won't
-         * worry about reporting it.
-         */
-        return;
-    }
-    shutdown_pending = 1;
-}
-
-/* do a graceful restart if graceful == 1 */
-static void ap_start_restart(int graceful)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (restart_pending == 1) {
-        /* Probably not an error - don't bother reporting it */
-        return;
-    }
-    restart_pending = 1;
-    is_graceful = graceful;
-}
-
-static void sig_term(int sig)
-{
-    ap_start_shutdown();
-}
-
-static void restart(int sig)
-{
-    ap_start_restart(sig == AP_SIG_GRACEFUL);
-}
-
-static void set_signals(void)
-{
-#ifndef NO_USE_SIGACTION
-    struct sigaction sa;
-#endif
-
-    if (!one_process) {
-        ap_fatal_signal_setup(ap_server_conf, pconf);
-    }
-
-#ifndef NO_USE_SIGACTION
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = 0;
-
-    sa.sa_handler = sig_term;
-    if (sigaction(SIGTERM, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGTERM)");
-#ifdef SIGINT
-    if (sigaction(SIGINT, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGINT)");
-#endif
-#ifdef SIGXCPU
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXCPU, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXCPU)");
-#endif
-#ifdef SIGXFSZ
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXFSZ, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXFSZ)");
-#endif
-#ifdef SIGPIPE
-    sa.sa_handler = SIG_IGN;
-    if (sigaction(SIGPIPE, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGPIPE)");
-#endif
-
-    /* we want to ignore HUPs and AP_SIG_GRACEFUL while we're busy 
-     * processing one */
-    sigaddset(&sa.sa_mask, SIGHUP);
-    sigaddset(&sa.sa_mask, AP_SIG_GRACEFUL);
-    sa.sa_handler = restart;
-    if (sigaction(SIGHUP, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGHUP)");
-    if (sigaction(AP_SIG_GRACEFUL, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(" AP_SIG_GRACEFUL_STRING ")");
-#else
-    if (!one_process) {
-#ifdef SIGXCPU
-        apr_signal(SIGXCPU, SIG_DFL);
-#endif /* SIGXCPU */
-#ifdef SIGXFSZ
-        apr_signal(SIGXFSZ, SIG_DFL);
-#endif /* SIGXFSZ */
-    }
-
-    apr_signal(SIGTERM, sig_term);
-#ifdef SIGHUP
-    apr_signal(SIGHUP, restart);
-#endif /* SIGHUP */
-#ifdef AP_SIG_GRACEFUL
-    apr_signal(AP_SIG_GRACEFUL, restart);
-#endif /* AP_SIG_GRACEFUL */
-#ifdef SIGPIPE
-    apr_signal(SIGPIPE, SIG_IGN);
-#endif /* SIGPIPE */
-
-#endif
-}
-
-/*****************************************************************
- * Here follows a long bunch of generic server bookkeeping stuff...
- */
-
-int ap_graceful_stop_signalled(void)
-    /* XXX this is really a bad confusing obsolete name
-     * maybe it should be ap_mpm_process_exiting?
-     */
-{
-    /* note: for a graceful termination, listener_may_exit will be set before
-     *       workers_may_exit, so check listener_may_exit
-     */
-    return listener_may_exit;
-}
-
-/*****************************************************************
- * Child process main loop.
- */
-
-static void process_socket(apr_pool_t *p, apr_socket_t *sock, int my_child_num,
-                           int my_thread_num, apr_bucket_alloc_t *bucket_alloc)
-{
-    conn_rec *current_conn;
-    long conn_id = ID_FROM_CHILD_THREAD(my_child_num, my_thread_num);
-    int csd;
-    ap_sb_handle_t *sbh;
-
-    ap_create_sb_handle(&sbh, p, my_child_num, my_thread_num);
-    apr_os_sock_get(&csd, sock);
-
-    current_conn = ap_run_create_connection(p, ap_server_conf, sock,
-                                            conn_id, sbh, bucket_alloc);
-    if (current_conn) {
-        ap_process_connection(current_conn, sock);
-        ap_lingering_close(current_conn);
-    }
-}
-
-/* requests_this_child has gone to zero or below.  See if the admin coded
-   "MaxRequestsPerChild 0", and keep going in that case.  Doing it this way
-   simplifies the hot path in worker_thread */
-static void check_infinite_requests(void)
-{
-    if (ap_max_requests_per_child) {
-        signal_threads(ST_GRACEFUL);
-    }
-    else {
-        /* wow! if you're executing this code, you may have set a record.
-         * either this child process has served over 2 billion requests, or
-         * you're running a threaded 2.0 on a 16 bit machine.  
-         *
-         * I'll buy pizza and beers at Apachecon for the first person to do
-         * the former without cheating (dorking with INT_MAX, or running with
-         * uncommitted performance patches, for example).    
-         *
-         * for the latter case, you probably deserve a beer too.   Greg Ames
-         */
-            
-        requests_this_child = INT_MAX;      /* keep going */ 
-    }
-}
-
-static void unblock_signal(int sig)
-{
-    sigset_t sig_mask;
-
-    sigemptyset(&sig_mask);
-    sigaddset(&sig_mask, sig);
-#if defined(SIGPROCMASK_SETS_THREAD_MASK)
-    sigprocmask(SIG_UNBLOCK, &sig_mask, NULL);
-#else
-    pthread_sigmask(SIG_UNBLOCK, &sig_mask, NULL);
-#endif
-}
-
-static void dummy_signal_handler(int sig)
-{
-    /* XXX If specifying SIG_IGN is guaranteed to unblock a syscall,
-     *     then we don't need this goofy function.
-     */
-}
-
-static void *listener_thread(apr_thread_t *thd, void * dummy)
-{
-    proc_info * ti = dummy;
-    int process_slot = ti->pid;
-    apr_pool_t *tpool = apr_thread_pool_get(thd);
-    void *csd = NULL;
-    apr_pool_t *ptrans = NULL;            /* Pool for per-transaction stuff */
-    int n;
-    apr_pollfd_t *pollset;
-    apr_status_t rv;
-    ap_listen_rec *lr, *last_lr = ap_listeners;
-    int have_idle_worker = 0;
-
-    free(ti);
-
-    apr_poll_setup(&pollset, num_listensocks, tpool);
-    for(lr = ap_listeners ; lr != NULL ; lr = lr->next)
-        apr_poll_socket_add(pollset, lr->sd, APR_POLLIN);
-
-    /* Unblock the signal used to wake this thread up, and set a handler for
-     * it.
-     */
-    unblock_signal(LISTENER_SIGNAL);
-    apr_signal(LISTENER_SIGNAL, dummy_signal_handler);
-
-    /* TODO: Switch to a system where threads reuse the results from earlier
-       poll calls - manoj */
-    while (1) {
-        /* TODO: requests_this_child should be synchronized - aaron */
-        if (requests_this_child <= 0) {
-            check_infinite_requests();
-        }
-        if (listener_may_exit) break;
-
-        if (!have_idle_worker) {
-            /* the following pops a recycled ptrans pool off a stack
-             * if there is one, in addition to reserving a worker thread
-             */
-            rv = ap_queue_info_wait_for_idler(worker_queue_info,
-                                              &ptrans);
-            if (APR_STATUS_IS_EOF(rv)) {
-                break; /* we've been signaled to die now */
-            }
-            else if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "apr_queue_info_wait failed. Attempting to "
-                             " shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-                break;
-            }
-            have_idle_worker = 1;
-        }
-            
-        /* We've already decremented the idle worker count inside
-         * ap_queue_info_wait_for_idler. */
-
-        if ((rv = SAFE_ACCEPT(apr_proc_mutex_lock(accept_mutex)))
-            != APR_SUCCESS) {
-            int level = APLOG_EMERG;
-
-            if (listener_may_exit) {
-                break;
-            }
-            if (ap_scoreboard_image->parent[process_slot].generation != 
-                ap_scoreboard_image->global->running_generation) {
-                level = APLOG_DEBUG; /* common to get these at restart time */
-            }
-            ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                         "apr_proc_mutex_lock failed. Attempting to shutdown "
-                         "process gracefully.");
-            signal_threads(ST_GRACEFUL);
-            break;                    /* skip the lock release */
-        }
-
-        if (!ap_listeners->next) {
-            /* Only one listener, so skip the poll */
-            lr = ap_listeners;
-        }
-        else {
-            while (!listener_may_exit) {
-                apr_status_t ret;
-                apr_int16_t event;
-
-                ret = apr_poll(pollset, num_listensocks, &n, -1);
-                if (ret != APR_SUCCESS) {
-                    if (APR_STATUS_IS_EINTR(ret)) {
-                        continue;
-                    }
-
-                    /* apr_pollset_poll() will only return errors in catastrophic
-                     * circumstances. Let's try exiting gracefully, for now. */
-                    ap_log_error(APLOG_MARK, APLOG_ERR, ret, (const server_rec *)
-                                 ap_server_conf, "apr_poll: (listen)");
-                    signal_threads(ST_GRACEFUL);
-                }
-
-                if (listener_may_exit) break;
-
-                /* find a listener */
-                lr = last_lr;
-                do {
-                    lr = lr->next;
-                    if (lr == NULL) {
-                        lr = ap_listeners;
-                    }
-                    /* XXX: Should we check for POLLERR? */
-                    apr_poll_revents_get(&event, lr->sd, pollset);
-                    if (event & APR_POLLIN) {
-                        last_lr = lr;
-                        goto got_fd;
-                    }
-                } while (lr != last_lr);
-            }
-        }
-    got_fd:
-        if (!listener_may_exit) {
-            if (ptrans == NULL) {
-                /* we can't use a recycled transaction pool this time.
-                 * create a new transaction pool */
-                apr_allocator_t *allocator;
-
-                apr_allocator_create(&allocator);
-                apr_allocator_max_free_set(allocator, ap_max_mem_free);
-                apr_pool_create_ex(&ptrans, NULL, NULL, allocator);
-                apr_allocator_owner_set(allocator, ptrans);
-            }
-            apr_pool_tag(ptrans, "transaction");
-            rv = lr->accept_func(&csd, lr, ptrans);
-            /* later we trash rv and rely on csd to indicate success/failure */
-            AP_DEBUG_ASSERT(rv == APR_SUCCESS || !csd);
-
-            if (rv == APR_EGENERAL) {
-                /* E[NM]FILE, ENOMEM, etc */
-                resource_shortage = 1;
-                signal_threads(ST_GRACEFUL);
-            }
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                int level = APLOG_EMERG;
-
-                if (listener_may_exit) {
-                    break;
-                }
-                if (ap_scoreboard_image->parent[process_slot].generation != 
-                    ap_scoreboard_image->global->running_generation) {
-                    level = APLOG_DEBUG; /* common to get these at restart time */
-                }
-                ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            if (csd != NULL) {
-                rv = ap_queue_push(worker_queue, csd, ptrans);
-                if (rv) {
-                    /* trash the connection; we couldn't queue the connected
-                     * socket to a worker 
-                     */
-                    apr_socket_close(csd);
-                    ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                                 "ap_queue_push failed");
-                }
-                else {
-                    have_idle_worker = 0;
-                }
-            }
-        }
-        else {
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                int level = APLOG_EMERG;
-
-                if (ap_scoreboard_image->parent[process_slot].generation != 
-                    ap_scoreboard_image->global->running_generation) {
-                    level = APLOG_DEBUG; /* common to get these at restart time */
-                }
-                ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            break;
-        }
-    }
-
-    ap_queue_term(worker_queue);
-    dying = 1;
-    ap_scoreboard_image->parent[process_slot].quiescing = 1;
-
-    /* wake up the main thread */
-    kill(ap_my_pid, SIGTERM);
-
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-/* XXX For ungraceful termination/restart, we definitely don't want to
- *     wait for active connections to finish but we may want to wait
- *     for idle workers to get out of the queue code and release mutexes,
- *     since those mutexes are cleaned up pretty soon and some systems
- *     may not react favorably (i.e., segfault) if operations are attempted
- *     on cleaned-up mutexes.
- */
-static void * APR_THREAD_FUNC worker_thread(apr_thread_t *thd, void * dummy)
-{
-    proc_info * ti = dummy;
-    int process_slot = ti->pid;
-    int thread_slot = ti->tid;
-    apr_socket_t *csd = NULL;
-    apr_bucket_alloc_t *bucket_alloc;
-    apr_pool_t *last_ptrans = NULL;
-    apr_pool_t *ptrans;                /* Pool for per-transaction stuff */
-    apr_status_t rv;
-    int is_idle = 0;
-
-    free(ti);
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_STARTING, NULL);
-
-    while (!workers_may_exit) {
-        if (!is_idle) {
-            rv = ap_queue_info_set_idle(worker_queue_info, last_ptrans);
-            last_ptrans = NULL;
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "ap_queue_info_set_idle failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-                break;
-            }
-            is_idle = 1;
-        }
-
-        ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_READY, NULL);
-worker_pop:
-        if (workers_may_exit) {
-            break;
-        }
-        rv = ap_queue_pop(worker_queue, &csd, &ptrans);
-
-        if (rv != APR_SUCCESS) {
-            /* We get APR_EOF during a graceful shutdown once all the connections
-             * accepted by this server process have been handled.
-             */
-            if (APR_STATUS_IS_EOF(rv)) {
-                break;
-            }
-            /* We get APR_EINTR whenever ap_queue_pop() has been interrupted
-             * from an explicit call to ap_queue_interrupt_all(). This allows
-             * us to unblock threads stuck in ap_queue_pop() when a shutdown
-             * is pending.
-             *
-             * If workers_may_exit is set and this is ungraceful termination/
-             * restart, we are bound to get an error on some systems (e.g.,
-             * AIX, which sanity-checks mutex operations) since the queue
-             * may have already been cleaned up.  Don't log the "error" if
-             * workers_may_exit is set.
-             */
-            else if (APR_STATUS_IS_EINTR(rv)) {
-                goto worker_pop;
-            }
-            /* We got some other error. */
-            else if (!workers_may_exit) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "ap_queue_pop failed");
-            }
-            continue;
-        }
-        is_idle = 0;
-        worker_sockets[thread_slot] = csd;
-        bucket_alloc = apr_bucket_alloc_create(ptrans);
-        process_socket(ptrans, csd, process_slot, thread_slot, bucket_alloc);
-        worker_sockets[thread_slot] = NULL;
-        requests_this_child--; /* FIXME: should be synchronized - aaron */
-        apr_pool_clear(ptrans);
-        last_ptrans = ptrans;
-    }
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot,
-        (dying) ? SERVER_DEAD : SERVER_GRACEFUL, (request_rec *) NULL);
-
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static int check_signal(int signum)
-{
-    switch (signum) {
-    case SIGTERM:
-    case SIGINT:
-        return 1;
-    }
-    return 0;
-}
-
-static void create_listener_thread(thread_starter *ts)
-{
-    int my_child_num = ts->child_num_arg;
-    apr_threadattr_t *thread_attr = ts->threadattr;
-    proc_info *my_info;
-    apr_status_t rv;
-
-    my_info = (proc_info *)malloc(sizeof(proc_info));
-    my_info->pid = my_child_num;
-    my_info->tid = -1; /* listener thread doesn't have a thread slot */
-    my_info->sd = 0;
-    rv = apr_thread_create(&ts->listener, thread_attr, listener_thread,
-                           my_info, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "apr_thread_create: unable to create listener thread");
-        /* let the parent decide how bad this really is */
-        clean_child_exit(APEXIT_CHILDSICK);
-    }
-    apr_os_thread_get(&listener_os_thread, ts->listener);
-}
-
-/* XXX under some circumstances not understood, children can get stuck
- *     in start_threads forever trying to take over slots which will
- *     never be cleaned up; for now there is an APLOG_DEBUG message issued
- *     every so often when this condition occurs
- */
-static void * APR_THREAD_FUNC start_threads(apr_thread_t *thd, void *dummy)
-{
-    thread_starter *ts = dummy;
-    apr_thread_t **threads = ts->threads;
-    apr_threadattr_t *thread_attr = ts->threadattr;
-    int child_num_arg = ts->child_num_arg;
-    int my_child_num = child_num_arg;
-    proc_info *my_info;
-    apr_status_t rv;
-    int i;
-    int threads_created = 0;
-    int listener_started = 0;
-    int loops;
-    int prev_threads_created;
-
-    /* We must create the fd queues before we start up the listener
-     * and worker threads. */
-    worker_queue = apr_pcalloc(pchild, sizeof(*worker_queue));
-    rv = ap_queue_init(worker_queue, ap_threads_per_child, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "ap_queue_init() failed");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    rv = ap_queue_info_create(&worker_queue_info, pchild,
-                              ap_threads_per_child);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "ap_queue_info_create() failed");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    worker_sockets = apr_pcalloc(pchild, ap_threads_per_child
-                                        * sizeof(apr_socket_t *));
-
-    loops = prev_threads_created = 0;
-    while (1) {
-        /* ap_threads_per_child does not include the listener thread */
-        for (i = 0; i < ap_threads_per_child; i++) {
-            int status = ap_scoreboard_image->servers[child_num_arg][i].status;
-
-            if (status != SERVER_GRACEFUL && status != SERVER_DEAD) {
-                continue;
-            }
-
-            my_info = (proc_info *)malloc(sizeof(proc_info));
-            if (my_info == NULL) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                             "malloc: out of memory");
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            my_info->pid = my_child_num;
-            my_info->tid = i;
-            my_info->sd = 0;
-        
-            /* We are creating threads right now */
-            ap_update_child_status_from_indexes(my_child_num, i,
-                                                SERVER_STARTING, NULL);
-            /* We let each thread update its own scoreboard entry.  This is
-             * done because it lets us deal with tid better.
-             */
-            rv = apr_thread_create(&threads[i], thread_attr, 
-                                   worker_thread, my_info, pchild);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                    "apr_thread_create: unable to create worker thread");
-                /* let the parent decide how bad this really is */
-                clean_child_exit(APEXIT_CHILDSICK);
-            }
-            threads_created++;
-        }
-        /* Start the listener only when there are workers available */
-        if (!listener_started && threads_created) {
-            create_listener_thread(ts);
-            listener_started = 1;
-        }
-        if (start_thread_may_exit || threads_created == ap_threads_per_child) {
-            break;
-        }
-        /* wait for previous generation to clean up an entry */
-        apr_sleep(apr_time_from_sec(1));
-        ++loops;
-        if (loops % 120 == 0) { /* every couple of minutes */
-            if (prev_threads_created == threads_created) {
-                ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                             "child %" APR_PID_T_FMT " isn't taking over "
-                             "slots very quickly (%d of %d)",
-                             ap_my_pid, threads_created, ap_threads_per_child);
-            }
-            prev_threads_created = threads_created;
-        }
-    }
-    
-    /* What state should this child_main process be listed as in the 
-     * scoreboard...?
-     *  ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING, 
-     *                                      (request_rec *) NULL);
-     * 
-     *  This state should be listed separately in the scoreboard, in some kind
-     *  of process_status, not mixed in with the worker threads' status.   
-     *  "life_status" is almost right, but it's in the worker's structure, and 
-     *  the name could be clearer.   gla
-     */
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static void join_workers(apr_thread_t *listener, apr_thread_t **threads)
-{
-    int i;
-    apr_status_t rv, thread_rv;
-
-    if (listener) {
-        int iter;
-        
-        /* deal with a rare timing window which affects waking up the
-         * listener thread...  if the signal sent to the listener thread
-         * is delivered between the time it verifies that the
-         * listener_may_exit flag is clear and the time it enters a
-         * blocking syscall, the signal didn't do any good...  work around
-         * that by sleeping briefly and sending it again
-         */
-
-        iter = 0;
-        while (iter < 10 && 
-#ifdef HAVE_PTHREAD_KILL
-               pthread_kill(*listener_os_thread, 0)
-#else
-               kill(ap_my_pid, 0)
-#endif
-               == 0) {
-            /* listener not dead yet */
-            apr_sleep(apr_time_make(0, 500000));
-            wakeup_listener();
-            ++iter;
-        }
-        if (iter >= 10) {
-            ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                         "the listener thread didn't exit");
-        }
-        else {
-            rv = apr_thread_join(&thread_rv, listener);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "apr_thread_join: unable to join listener thread");
-            }
-        }
-    }
-    
-    for (i = 0; i < ap_threads_per_child; i++) {
-        if (threads[i]) { /* if we ever created this thread */
-            rv = apr_thread_join(&thread_rv, threads[i]);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "apr_thread_join: unable to join worker "
-                             "thread %d",
-                             i);
-            }
-        }
-    }
-}
-
-static void join_start_thread(apr_thread_t *start_thread_id)
-{
-    apr_status_t rv, thread_rv;
-
-    start_thread_may_exit = 1; /* tell it to give up in case it is still 
-                                * trying to take over slots from a 
-                                * previous generation
-                                */
-    rv = apr_thread_join(&thread_rv, start_thread_id);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                     "apr_thread_join: unable to join the start "
-                     "thread");
-    }
-}
-
-static void child_main(int child_num_arg)
-{
-    apr_thread_t **threads;
-    apr_status_t rv;
-    thread_starter *ts;
-    apr_threadattr_t *thread_attr;
-    apr_thread_t *start_thread_id;
-
-    mpm_state = AP_MPMQ_STARTING; /* for benefit of any hooks that run as this
-                                   * child initializes
-                                   */
-    ap_my_pid = getpid();
-    ap_fatal_signal_child_setup(ap_server_conf);
-    apr_pool_create(&pchild, pconf);
-
-    /*stuff to do before we switch id's, so we have permissions.*/
-    ap_reopen_scoreboard(pchild, NULL, 0);
-
-    rv = SAFE_ACCEPT(apr_proc_mutex_child_init(&accept_mutex, ap_lock_fname,
-                                               pchild));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize cross-process lock in child");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (unixd_setup_child()) {
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ap_run_child_init(pchild, ap_server_conf);
-
-    /* done with init critical section */
-
-    /* Just use the standard apr_setup_signal_thread to block all signals
-     * from being received.  The child processes no longer use signals for
-     * any communication with the parent process.
-     */
-    rv = apr_setup_signal_thread();
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize signal thread");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (ap_max_requests_per_child) {
-        requests_this_child = ap_max_requests_per_child;
-    }
-    else {
-        /* coding a value of zero means infinity */
-        requests_this_child = INT_MAX;
-    }
-    
-    /* Setup worker threads */
-
-    /* clear the storage; we may not create all our threads immediately, 
-     * and we want a 0 entry to indicate a thread which was not created
-     */
-    threads = (apr_thread_t **)calloc(1, 
-                                sizeof(apr_thread_t *) * ap_threads_per_child);
-    if (threads == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                     "malloc: out of memory");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ts = (thread_starter *)apr_palloc(pchild, sizeof(*ts));
-
-    apr_threadattr_create(&thread_attr, pchild);
-    /* 0 means PTHREAD_CREATE_JOINABLE */
-    apr_threadattr_detach_set(thread_attr, 0);
-
-    ts->threads = threads;
-    ts->listener = NULL;
-    ts->child_num_arg = child_num_arg;
-    ts->threadattr = thread_attr;
-
-    rv = apr_thread_create(&start_thread_id, thread_attr, start_threads,
-                           ts, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "apr_thread_create: unable to create worker thread");
-        /* let the parent decide how bad this really is */
-        clean_child_exit(APEXIT_CHILDSICK);
-    }
-
-    mpm_state = AP_MPMQ_RUNNING;
-
-    /* If we are only running in one_process mode, we will want to
-     * still handle signals. */
-    if (one_process) {
-        /* Block until we get a terminating signal. */
-        apr_signal_thread(check_signal);
-        /* make sure the start thread has finished; signal_threads() 
-         * and join_workers() depend on that
-         */
-        /* XXX join_start_thread() won't be awakened if one of our
-         *     threads encounters a critical error and attempts to
-         *     shutdown this child
-         */
-        join_start_thread(start_thread_id);
-        signal_threads(ST_UNGRACEFUL); /* helps us terminate a little more
-                           * quickly than the dispatch of the signal thread
-                           * beats the Pipe of Death and the browsers
-                           */
-        /* A terminating signal was received. Now join each of the
-         * workers to clean them up.
-         *   If the worker already exited, then the join frees
-         *   their resources and returns.
-         *   If the worker hasn't exited, then this blocks until
-         *   they have (then cleans up).
-         */
-        join_workers(ts->listener, threads);
-    }
-    else { /* !one_process */
-        /* remove SIGTERM from the set of blocked signals...  if one of
-         * the other threads in the process needs to take us down
-         * (e.g., for MaxRequestsPerChild) it will send us SIGTERM
-         */
-        unblock_signal(SIGTERM);
-        apr_signal(SIGTERM, dummy_signal_handler);
-        /* Watch for any messages from the parent over the POD */
-        while (1) {
-            rv = ap_mpm_pod_check(pod);
-            if (rv == AP_NORESTART) {
-                /* see if termination was triggered while we slept */
-                switch(terminate_mode) {
-                case ST_GRACEFUL:
-                    rv = AP_GRACEFUL;
-                    break;
-                case ST_UNGRACEFUL:
-                    rv = AP_RESTART;
-                    break;
-                }
-            }
-            if (rv == AP_GRACEFUL || rv == AP_RESTART) {
-                /* make sure the start thread has finished; 
-                 * signal_threads() and join_workers depend on that
-                 */
-                join_start_thread(start_thread_id);
-                signal_threads(rv == AP_GRACEFUL ? ST_GRACEFUL : ST_UNGRACEFUL);
-                break;
-            }
-        }
-
-        /* A terminating signal was received. Now join each of the
-         * workers to clean them up.
-         *   If the worker already exited, then the join frees
-         *   their resources and returns.
-         *   If the worker hasn't exited, then this blocks until
-         *   they have (then cleans up).
-         */
-        join_workers(ts->listener, threads);
-    }
-
-    free(threads);
-
-    clean_child_exit(resource_shortage ? APEXIT_CHILDSICK : 0);
-}
-
-static int make_child(server_rec *s, int slot) 
-{
-    int pid;
-
-    if (slot + 1 > ap_max_daemons_limit) {
-        ap_max_daemons_limit = slot + 1;
-    }
-
-    if (one_process) {
-        set_signals();
-        ap_scoreboard_image->parent[slot].pid = getpid();
-        child_main(slot);
-    }
-
-    if ((pid = fork()) == -1) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, s, 
-                     "fork: Unable to fork new process");
-
-        /* fork didn't succeed. Fix the scoreboard or else
-         * it will say SERVER_STARTING forever and ever
-         */
-        ap_update_child_status_from_indexes(slot, 0, SERVER_DEAD, NULL);
-
-        /* In case system resources are maxxed out, we don't want
-           Apache running away with the CPU trying to fork over and
-           over and over again. */
-        apr_sleep(apr_time_from_sec(10));
-
-        return -1;
-    }
-
-    if (!pid) {
-#ifdef HAVE_BINDPROCESSOR
-        /* By default, AIX binds to a single processor.  This bit unbinds
-         * children which will then bind to another CPU.
-         */
-        int status = bindprocessor(BINDPROCESS, (int)getpid(),
-                               PROCESSOR_CLASS_ANY);
-        if (status != OK)
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, 
-                         ap_server_conf,
-                         "processor unbind failed %d", status);
-#endif
-        RAISE_SIGSTOP(MAKE_CHILD);
-
-        apr_signal(SIGTERM, just_die);
-        child_main(slot);
-
-        clean_child_exit(0);
-    }
-    /* else */
-    if (ap_scoreboard_image->parent[slot].pid != 0) {
-        /* This new child process is squatting on the scoreboard
-         * entry owned by an exiting child process, which cannot
-         * exit until all active requests complete.
-         * Don't forget about this exiting child process, or we
-         * won't be able to kill it if it doesn't exit by the
-         * time the server is shut down.
-         */
-        ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                     "taking over scoreboard slot from %" APR_PID_T_FMT "%s",
-                     ap_scoreboard_image->parent[slot].pid,
-                     ap_scoreboard_image->parent[slot].quiescing ?
-                         " (quiescing)" : "");
-        ap_register_extra_mpm_process(ap_scoreboard_image->parent[slot].pid);
-    }
-    ap_scoreboard_image->parent[slot].quiescing = 0;
-    ap_scoreboard_image->parent[slot].pid = pid;
-    return 0;
-}
-
-/* start up a bunch of children */
-static void startup_children(int number_to_start)
-{
-    int i;
-
-    for (i = 0; number_to_start && i < ap_daemons_limit; ++i) {
-        if (ap_scoreboard_image->parent[i].pid != 0) {
-            continue;
-        }
-        if (make_child(ap_server_conf, i) < 0) {
-            break;
-        }
-        --number_to_start;
-    }
-}
-
-
-/*
- * idle_spawn_rate is the number of children that will be spawned on the
- * next maintenance cycle if there aren't enough idle servers.  It is
- * doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by
- * without the need to spawn.
- */
-static int idle_spawn_rate = 1;
-#ifndef MAX_SPAWN_RATE
-#define MAX_SPAWN_RATE        (32)
-#endif
-static int hold_off_on_exponential_spawning;
-
-static void perform_idle_server_maintenance(void)
-{
-    int i, j;
-    int idle_thread_count;
-    worker_score *ws;
-    process_score *ps;
-    int free_length;
-    int totally_free_length = 0;
-    int free_slots[MAX_SPAWN_RATE];
-    int last_non_dead;
-    int total_non_dead;
-    int active_thread_count = 0;
-
-    /* initialize the free_list */
-    free_length = 0;
-
-    idle_thread_count = 0;
-    last_non_dead = -1;
-    total_non_dead = 0;
-
-    for (i = 0; i < ap_daemons_limit; ++i) {
-        /* Initialization to satisfy the compiler. It doesn't know
-         * that ap_threads_per_child is always > 0 */
-        int status = SERVER_DEAD;
-        int any_dying_threads = 0;
-        int any_dead_threads = 0;
-        int all_dead_threads = 1;
-
-        if (i >= ap_max_daemons_limit && totally_free_length == idle_spawn_rate)
-            break;
-        ps = &ap_scoreboard_image->parent[i];
-        for (j = 0; j < ap_threads_per_child; j++) {
-            ws = &ap_scoreboard_image->servers[i][j];
-            status = ws->status;
-
-            /* XXX any_dying_threads is probably no longer needed    GLA */
-            any_dying_threads = any_dying_threads || 
-                                (status == SERVER_GRACEFUL);
-            any_dead_threads = any_dead_threads || (status == SERVER_DEAD);
-            all_dead_threads = all_dead_threads &&
-                                   (status == SERVER_DEAD ||
-                                    status == SERVER_GRACEFUL);
-
-            /* We consider a starting server as idle because we started it
-             * at least a cycle ago, and if it still hasn't finished starting
-             * then we're just going to swamp things worse by forking more.
-             * So we hopefully won't need to fork more if we count it.
-             * This depends on the ordering of SERVER_READY and SERVER_STARTING.
-             */
-            if (ps->pid != 0) { /* XXX just set all_dead_threads in outer for
-                                   loop if no pid?  not much else matters */
-                if (status <= SERVER_READY && status != SERVER_DEAD &&
-                        !ps->quiescing &&
-                        ps->generation == ap_my_generation) {
-                    ++idle_thread_count;
-                }
-                if (status >= SERVER_READY && status < SERVER_GRACEFUL) {
-                    ++active_thread_count;
-                }
-            }
-        }
-        if (any_dead_threads && totally_free_length < idle_spawn_rate
-                && free_length < MAX_SPAWN_RATE
-                && (!ps->pid               /* no process in the slot */
-                    || ps->quiescing)) {   /* or at least one is going away */
-            if (all_dead_threads) {
-                /* great! we prefer these, because the new process can
-                 * start more threads sooner.  So prioritize this slot 
-                 * by putting it ahead of any slots with active threads.
-                 *
-                 * first, make room by moving a slot that's potentially still
-                 * in use to the end of the array
-                 */
-                free_slots[free_length] = free_slots[totally_free_length];
-                free_slots[totally_free_length++] = i;
-            }
-            else {
-                /* slot is still in use - back of the bus
-                 */
-            free_slots[free_length] = i;
-            }
-            ++free_length;
-        }
-        /* XXX if (!ps->quiescing)     is probably more reliable  GLA */
-        if (!any_dying_threads) {
-            last_non_dead = i;
-            ++total_non_dead;
-        }
-    }
-
-    if (sick_child_detected) {
-        if (active_thread_count > 0) {
-            /* some child processes appear to be working.  don't kill the
-             * whole server.
-             */
-            sick_child_detected = 0;
-        }
-        else {
-            /* looks like a basket case.  give up.  
-             */
-            shutdown_pending = 1;
-            child_fatal = 1;
-            ap_log_error(APLOG_MARK, APLOG_ALERT, 0,
-                         ap_server_conf,
-                         "No active workers found..."
-                         " Apache is exiting!");
-            /* the child already logged the failure details */
-            return;
-        }
-    }
-                                                    
-    ap_max_daemons_limit = last_non_dead + 1;
-
-    if (idle_thread_count > max_spare_threads) {
-        /* Kill off one child */
-        ap_mpm_pod_signal(pod, TRUE);
-        idle_spawn_rate = 1;
-    }
-    else if (idle_thread_count < min_spare_threads) {
-        /* terminate the free list */
-        if (free_length == 0) {
-            /* only report this condition once */
-            static int reported = 0;
-            
-            if (!reported) {
-                ap_log_error(APLOG_MARK, APLOG_ERR, 0, 
-                             ap_server_conf,
-                             "server reached MaxClients setting, consider"
-                             " raising the MaxClients setting");
-                reported = 1;
-            }
-            idle_spawn_rate = 1;
-        }
-        else {
-            if (free_length > idle_spawn_rate) {
-                free_length = idle_spawn_rate;
-            }
-            if (idle_spawn_rate >= 8) {
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0, 
-                             ap_server_conf,
-                             "server seems busy, (you may need "
-                             "to increase StartServers, ThreadsPerChild "
-                             "or Min/MaxSpareThreads), "
-                             "spawning %d children, there are around %d idle "
-                             "threads, and %d total children", free_length,
-                             idle_thread_count, total_non_dead);
-            }
-            for (i = 0; i < free_length; ++i) {
-                make_child(ap_server_conf, free_slots[i]);
-            }
-            /* the next time around we want to spawn twice as many if this
-             * wasn't good enough, but not if we've just done a graceful
-             */
-            if (hold_off_on_exponential_spawning) {
-                --hold_off_on_exponential_spawning;
-            }
-            else if (idle_spawn_rate < MAX_SPAWN_RATE) {
-                idle_spawn_rate *= 2;
-            }
-        }
-    }
-    else {
-      idle_spawn_rate = 1;
-    }
-}
-
-static void server_main_loop(int remaining_children_to_start)
-{
-    int child_slot;
-    apr_exit_why_e exitwhy;
-    int status, processed_status;
-    apr_proc_t pid;
-    int i;
-
-    while (!restart_pending && !shutdown_pending) {
-        ap_wait_or_timeout(&exitwhy, &status, &pid, pconf);
-        
-        if (pid.pid != -1) {
-            processed_status = ap_process_child_status(&pid, exitwhy, status);
-            if (processed_status == APEXIT_CHILDFATAL) {
-                shutdown_pending = 1;
-                child_fatal = 1;
-                return;
-            }
-            else if (processed_status == APEXIT_CHILDSICK) {
-                /* tell perform_idle_server_maintenance to check into this
-                 * on the next timer pop
-                 */
-                sick_child_detected = 1;
-            }
-            /* non-fatal death... note that it's gone in the scoreboard. */
-            child_slot = find_child_by_pid(&pid);
-            if (child_slot >= 0) {
-                for (i = 0; i < ap_threads_per_child; i++)
-                    ap_update_child_status_from_indexes(child_slot, i, SERVER_DEAD, 
-                                                        (request_rec *) NULL);
-                
-                ap_scoreboard_image->parent[child_slot].pid = 0;
-                ap_scoreboard_image->parent[child_slot].quiescing = 0;
-                if (processed_status == APEXIT_CHILDSICK) {
-                    /* resource shortage, minimize the fork rate */
-                    idle_spawn_rate = 1;
-                }
-                else if (remaining_children_to_start
-                    && child_slot < ap_daemons_limit) {
-                    /* we're still doing a 1-for-1 replacement of dead
-                     * children with new children
-                     */
-                    make_child(ap_server_conf, child_slot);
-                    --remaining_children_to_start;
-                }
-            }
-            else if (ap_unregister_extra_mpm_process(pid.pid) == 1) {
-                /* handled */
-#if APR_HAS_OTHER_CHILD
-            }
-            else if (apr_proc_other_child_read(&pid, status) == 0) {
-                /* handled */
-#endif
-            }
-            else if (is_graceful) {
-                /* Great, we've probably just lost a slot in the
-                 * scoreboard.  Somehow we don't know about this child.
-                 */
-                ap_log_error(APLOG_MARK, APLOG_WARNING, 0,
-                             ap_server_conf,
-                             "long lost child came home! (pid %ld)",
-                             (long)pid.pid);
-            }
-            /* Don't perform idle maintenance when a child dies,
-             * only do it when there's a timeout.  Remember only a
-             * finite number of children can die, and it's pretty
-             * pathological for a lot to die suddenly.
-             */
-            continue;
-        }
-        else if (remaining_children_to_start) {
-            /* we hit a 1 second timeout in which none of the previous
-             * generation of children needed to be reaped... so assume
-             * they're all done, and pick up the slack if any is left.
-             */
-            startup_children(remaining_children_to_start);
-            remaining_children_to_start = 0;
-            /* In any event we really shouldn't do the code below because
-             * few of the servers we just started are in the IDLE state
-             * yet, so we'd mistakenly create an extra server.
-             */
-            continue;
-        }
-
-        perform_idle_server_maintenance();
-    }
-}
-
-int ap_mpm_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s)
-{
-    int remaining_children_to_start;
-    apr_status_t rv;
-
-    ap_log_pid(pconf, ap_pid_fname);
-
-    first_server_limit = server_limit;
-    first_thread_limit = thread_limit;
-    if (changed_limit_at_restart) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s,
-                     "WARNING: Attempt to change ServerLimit or ThreadLimit "
-                     "ignored during restart");
-        changed_limit_at_restart = 0;
-    }
-    
-    /* Initialize cross-process accept lock */
-    ap_lock_fname = apr_psprintf(_pconf, "%s.%" APR_PID_T_FMT,
-                                 ap_server_root_relative(_pconf, ap_lock_fname),
-                                 ap_my_pid);
-
-    rv = apr_proc_mutex_create(&accept_mutex, ap_lock_fname, 
-                               ap_accept_lock_mech, _pconf);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                     "Couldn't create accept lock");
-        mpm_state = AP_MPMQ_STOPPING;
-        return 1;
-    }
-
-#if APR_USE_SYSVSEM_SERIALIZE
-    if (ap_accept_lock_mech == APR_LOCK_DEFAULT || 
-        ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#else
-    if (ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#endif
-        rv = unixd_set_proc_mutex_perms(accept_mutex);
-        if (rv != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                         "Couldn't set permissions on cross-process lock; "
-                         "check User and Group directives");
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-    }
-
-    if (!is_graceful) {
-        if (ap_run_pre_mpm(s->process->pool, SB_SHARED) != OK) {
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-        /* fix the generation number in the global score; we just got a new,
-         * cleared scoreboard
-         */
-        ap_scoreboard_image->global->running_generation = ap_my_generation;
-    }
-
-    set_signals();
-    /* Don't thrash... */
-    if (max_spare_threads < min_spare_threads + ap_threads_per_child)
-        max_spare_threads = min_spare_threads + ap_threads_per_child;
-
-    /* If we're doing a graceful_restart then we're going to see a lot
-     * of children exiting immediately when we get into the main loop
-     * below (because we just sent them AP_SIG_GRACEFUL).  This happens pretty
-     * rapidly... and for each one that exits we'll start a new one until
-     * we reach at least daemons_min_free.  But we may be permitted to
-     * start more than that, so we'll just keep track of how many we're
-     * supposed to start up without the 1 second penalty between each fork.
-     */
-    remaining_children_to_start = ap_daemons_to_start;
-    if (remaining_children_to_start > ap_daemons_limit) {
-        remaining_children_to_start = ap_daemons_limit;
-    }
-    if (!is_graceful) {
-        startup_children(remaining_children_to_start);
-        remaining_children_to_start = 0;
-    }
-    else {
-        /* give the system some time to recover before kicking into
-            * exponential mode */
-        hold_off_on_exponential_spawning = 10;
-    }
-
-    ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                "%s configured -- resuming normal operations",
-                ap_get_server_version());
-    ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf,
-                "Server built: %s", ap_get_server_built());
-#ifdef AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-		"AcceptMutex: %s (default: %s)",
-		apr_proc_mutex_name(accept_mutex),
-		apr_proc_mutex_defname());
-#endif
-    restart_pending = shutdown_pending = 0;
-    mpm_state = AP_MPMQ_RUNNING;
-    
-    server_main_loop(remaining_children_to_start);
-    mpm_state = AP_MPMQ_STOPPING;
-
-    if (shutdown_pending) {
-        /* Time to gracefully shut down:
-         * Kill child processes, tell them to call child_exit, etc...
-         * (By "gracefully" we don't mean graceful in the same sense as 
-         * "apachectl graceful" where we allow old connections to finish.)
-         */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, FALSE);
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-
-        if (!child_fatal) {
-            /* cleanup pid file on normal shutdown */
-            const char *pidfile = NULL;
-            pidfile = ap_server_root_relative (pconf, ap_pid_fname);
-            if ( pidfile != NULL && unlink(pidfile) == 0)
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0,
-                             ap_server_conf,
-                             "removed PID file %s (pid=%ld)",
-                             pidfile, (long)getpid());
-    
-            ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                         ap_server_conf, "caught SIGTERM, shutting down");
-        }
-        return 1;
-    }
-
-    /* we've been told to restart */
-    apr_signal(SIGHUP, SIG_IGN);
-
-    if (one_process) {
-        /* not worth thinking about */
-        return 1;
-    }
-
-    /* advance to the next generation */
-    /* XXX: we really need to make sure this new generation number isn't in
-     * use by any of the children.
-     */
-    ++ap_my_generation;
-    ap_scoreboard_image->global->running_generation = ap_my_generation;
-    
-    if (is_graceful) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                     AP_SIG_GRACEFUL_STRING " received.  Doing graceful restart");
-        /* wake up the children...time to die.  But we'll have more soon */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, TRUE);
-    
-
-        /* This is mostly for debugging... so that we know what is still
-         * gracefully dealing with existing request.
-         */
-        
-    }
-    else {
-        /* Kill 'em all.  Since the child acts the same on the parents SIGTERM 
-         * and a SIGHUP, we may as well use the same signal, because some user
-         * pthreads are stealing signals from us left and right.
-         */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, FALSE);
-
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                    "SIGHUP received.  Attempting to restart");
-    }
-
-    return 0;
-}
-
-/* This really should be a post_config hook, but the error log is already
- * redirected by that point, so we need to do this in the open_logs phase.
- */
-static int worker_open_logs(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
-{
-    apr_status_t rv;
-
-    pconf = p;
-    ap_server_conf = s;
-
-    if ((num_listensocks = ap_setup_listeners(ap_server_conf)) < 1) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT|APLOG_STARTUP, 0,
-                     NULL, "no listening sockets available, shutting down");
-        return DONE;
-    }
-
-    if (!one_process) {
-        if ((rv = ap_mpm_pod_open(pconf, &pod))) {
-            ap_log_error(APLOG_MARK, APLOG_CRIT|APLOG_STARTUP, rv, NULL,
-                    "Could not open pipe-of-death.");
-            return DONE;
-        }
-    }
-    return OK;
-}
-
-static int worker_pre_config(apr_pool_t *pconf, apr_pool_t *plog, 
-                             apr_pool_t *ptemp)
-{
-    static int restart_num = 0;
-    int no_detach, debug, foreground;
-    ap_directive_t *pdir;
-    ap_directive_t *max_clients = NULL;
-    apr_status_t rv;
-
-    mpm_state = AP_MPMQ_STARTING;
-
-    /* make sure that "ThreadsPerChild" gets set before "MaxClients" */
-    for (pdir = ap_conftree; pdir != NULL; pdir = pdir->next) {
-        if (strncasecmp(pdir->directive, "ThreadsPerChild", 15) == 0) {
-            if (!max_clients) {
-                break; /* we're in the clear, got ThreadsPerChild first */
-            }
-            else {
-                /* now to swap the data */
-                ap_directive_t temp;
-
-                temp.directive = pdir->directive;
-                temp.args = pdir->args;
-                /* Make sure you don't change 'next', or you may get loops! */
-                /* XXX: first_child, parent, and data can never be set
-                 * for these directives, right? -aaron */
-                temp.filename = pdir->filename;
-                temp.line_num = pdir->line_num;
-
-                pdir->directive = max_clients->directive;
-                pdir->args = max_clients->args;
-                pdir->filename = max_clients->filename;
-                pdir->line_num = max_clients->line_num;
-                
-                max_clients->directive = temp.directive;
-                max_clients->args = temp.args;
-                max_clients->filename = temp.filename;
-                max_clients->line_num = temp.line_num;
-                break;
-            }
-        }
-        else if (!max_clients
-                 && strncasecmp(pdir->directive, "MaxClients", 10) == 0) {
-            max_clients = pdir;
-        }
-    }
-
-    debug = ap_exists_config_define("DEBUG");
-
-    if (debug) {
-        foreground = one_process = 1;
-        no_detach = 0;
-    }
-    else {
-        one_process = ap_exists_config_define("ONE_PROCESS");
-        no_detach = ap_exists_config_define("NO_DETACH");
-        foreground = ap_exists_config_define("FOREGROUND");
-    }
-
-    /* sigh, want this only the second time around */
-    if (restart_num++ == 1) {
-        is_graceful = 0;
-
-        if (!one_process && !foreground) {
-            rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND
-                                           : APR_PROC_DETACH_DAEMONIZE);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL,
-                             "apr_proc_detach failed");
-                return HTTP_INTERNAL_SERVER_ERROR;
-            }
-        }
-        parent_pid = ap_my_pid = getpid();
-    }
-
-    unixd_pre_config(ptemp);
-    ap_listen_pre_config();
-    ap_daemons_to_start = DEFAULT_START_DAEMON;
-    min_spare_threads = DEFAULT_MIN_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    max_spare_threads = DEFAULT_MAX_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    ap_daemons_limit = server_limit;
-    ap_threads_per_child = DEFAULT_THREADS_PER_CHILD;
-    ap_pid_fname = DEFAULT_PIDLOG;
-    ap_lock_fname = DEFAULT_LOCKFILE;
-    ap_max_requests_per_child = DEFAULT_MAX_REQUESTS_PER_CHILD;
-    ap_extended_status = 0;
-#ifdef AP_MPM_WANT_SET_MAX_MEM_FREE
-	ap_max_mem_free = APR_ALLOCATOR_MAX_FREE_UNLIMITED;
-#endif
-
-    apr_cpystrn(ap_coredump_dir, ap_server_root, sizeof(ap_coredump_dir));
-
-    return OK;
-}
-
-static void worker_hooks(apr_pool_t *p)
-{
-    /* The worker open_logs phase must run before the core's, or stderr
-     * will be redirected to a file, and the messages won't print to the
-     * console.
-     */
-    static const char *const aszSucc[] = {"core.c", NULL};
-    one_process = 0;
-
-    ap_hook_open_logs(worker_open_logs, NULL, aszSucc, APR_HOOK_MIDDLE);
-    /* we need to set the MPM state before other pre-config hooks use MPM query
-     * to retrieve it, so register as REALLY_FIRST
-     */
-    ap_hook_pre_config(worker_pre_config, NULL, NULL, APR_HOOK_REALLY_FIRST);
-}
-
-static const char *set_daemons_to_start(cmd_parms *cmd, void *dummy,
-                                        const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_daemons_to_start = atoi(arg);
-    return NULL;
-}
-
-static const char *set_min_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    min_spare_threads = atoi(arg);
-    if (min_spare_threads <= 0) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MinSpareThreads set to non-positive.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Resetting to 1 to avoid almost certain Apache failure.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Please read the documentation.");
-       min_spare_threads = 1;
-    }
-       
-    return NULL;
-}
-
-static const char *set_max_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    max_spare_threads = atoi(arg);
-    return NULL;
-}
-
-static const char *set_max_clients (cmd_parms *cmd, void *dummy,
-                                     const char *arg) 
-{
-    int max_clients;
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    /* It is ok to use ap_threads_per_child here because we are
-     * sure that it gets set before MaxClients in the pre_config stage. */
-    max_clients = atoi(arg);
-    if (max_clients < ap_threads_per_child) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) must be at least as large",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " as ThreadsPerChild (%d). Automatically",
-                    ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " increasing MaxClients to %d.",
-                    ap_threads_per_child);
-       max_clients = ap_threads_per_child;
-    }
-    ap_daemons_limit = max_clients / ap_threads_per_child;
-    if ((max_clients > 0) && (max_clients % ap_threads_per_child)) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) is not an integer multiple",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " of ThreadsPerChild (%d), lowering MaxClients to %d",
-                    ap_threads_per_child,
-                    ap_daemons_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " for a maximum of %d child processes,",
-                    ap_daemons_limit);
-       max_clients = ap_daemons_limit * ap_threads_per_child; 
-    }
-    if (ap_daemons_limit > server_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients of %d would require %d servers,",
-                    max_clients, ap_daemons_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " and would exceed the ServerLimit value of %d.",
-                    server_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " Automatically lowering MaxClients to %d.  To increase,",
-                    server_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " please see the ServerLimit directive.");
-       ap_daemons_limit = server_limit;
-    } 
-    else if (ap_daemons_limit < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require MaxClients > 0, setting to 1");
-        ap_daemons_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_threads_per_child (cmd_parms *cmd, void *dummy,
-                                          const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_threads_per_child = atoi(arg);
-    if (ap_threads_per_child > thread_limit) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: ThreadsPerChild of %d exceeds ThreadLimit "
-                     "value of %d", ap_threads_per_child,
-                     thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "threads, lowering ThreadsPerChild to %d. To increase, please"
-                     " see the", thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     " ThreadLimit directive.");
-        ap_threads_per_child = thread_limit;
-    }
-    else if (ap_threads_per_child < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadsPerChild > 0, setting to 1");
-        ap_threads_per_child = 1;
-    }
-    return NULL;
-}
-
-static const char *set_server_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_server_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_server_limit = atoi(arg);
-    /* you cannot change ServerLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_server_limit &&
-        tmp_server_limit != server_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    server_limit = tmp_server_limit;
-    
-    if (server_limit > MAX_SERVER_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ServerLimit of %d exceeds compile time limit "
-                    "of %d servers,", server_limit, MAX_SERVER_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ServerLimit to %d.", MAX_SERVER_LIMIT);
-       server_limit = MAX_SERVER_LIMIT;
-    } 
-    else if (server_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ServerLimit > 0, setting to 1");
-	server_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_thread_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_thread_limit = atoi(arg);
-    /* you cannot change ThreadLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_thread_limit &&
-        tmp_thread_limit != thread_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    thread_limit = tmp_thread_limit;
-    
-    if (thread_limit > MAX_THREAD_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ThreadLimit of %d exceeds compile time limit "
-                    "of %d servers,", thread_limit, MAX_THREAD_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ThreadLimit to %d.", MAX_THREAD_LIMIT);
-       thread_limit = MAX_THREAD_LIMIT;
-    } 
-    else if (thread_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadLimit > 0, setting to 1");
-	thread_limit = 1;
-    }
-    return NULL;
-}
-
-static const command_rec worker_cmds[] = {
-UNIX_DAEMON_COMMANDS,
-LISTEN_COMMANDS,
-AP_INIT_TAKE1("StartServers", set_daemons_to_start, NULL, RSRC_CONF,
-  "Number of child processes launched at server startup"),
-AP_INIT_TAKE1("MinSpareThreads", set_min_spare_threads, NULL, RSRC_CONF,
-  "Minimum number of idle threads, to handle request spikes"),
-AP_INIT_TAKE1("MaxSpareThreads", set_max_spare_threads, NULL, RSRC_CONF,
-  "Maximum number of idle threads"),
-AP_INIT_TAKE1("MaxClients", set_max_clients, NULL, RSRC_CONF,
-  "Maximum number of threads alive at the same time"),
-AP_INIT_TAKE1("ThreadsPerChild", set_threads_per_child, NULL, RSRC_CONF,
-  "Number of threads each child creates"),
-AP_INIT_TAKE1("ServerLimit", set_server_limit, NULL, RSRC_CONF,
-  "Maximum number of child processes for this run of Apache"),
-AP_INIT_TAKE1("ThreadLimit", set_thread_limit, NULL, RSRC_CONF,
-  "Maximum number of worker threads per child process for this run of Apache - Upper limit for ThreadsPerChild"),
-{ NULL }
-};
-
-module AP_MODULE_DECLARE_DATA mpm_worker_module = {
-    MPM20_MODULE_STUFF,
-    ap_mpm_rewrite_args,        /* hook to run before apache parses args */
-    NULL,                       /* create per-directory config structure */
-    NULL,                       /* merge per-directory config structures */
-    NULL,                       /* create per-server config structure */
-    NULL,                       /* merge per-server config structures */
-    worker_cmds,                /* command apr_table_t */
-    worker_hooks                /* register_hooks */
-};
-