delete app

Change-Id: Id4c572809969ebe89e946e88063eaed262cff3f2
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

19 files changed, 0 insertions, 6837 deletions

diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/Makefile.in b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/Makefile.in
deleted file mode 100644
index 03f1765e..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/Makefile.in
+++ /dev/null
@@ -1,5 +0,0 @@
-
-LTLIBRARY_NAME    = libleader.la
-LTLIBRARY_SOURCES = leader.c
-
-include $(top_srcdir)/build/ltlib.mk
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/README b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/README
deleted file mode 100644
index 1981a5be..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/README
+++ /dev/null
@@ -1,15 +0,0 @@
-Leader MPM:
-This is an experimental variant of the standard worker MPM.
-It uses a Leader/Followers design pattern to coordinate work among threads:
-http://deuce.doc.wustl.edu/doc/pspdfs/lf.pdf
-
-To use the leader MPM, add "--with-mpm=leader" to the configure
-script's arguments when building the httpd.
-  
-This MPM depends on APR's atomic compare-and-swap operations for
-thread synchronization.  If you are compiling for an x86 target
-and you don't need to support 386s, or you're compiling for a
-SPARC and you don't need to run on pre-UltraSPARC chips, add
-"--enable-nonportable-atomics=yes" to the configure script's
-arguments.  This will cause APR to implement atomic operations
-using efficient opcodes not available in older CPUs.
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/config5.m4 b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/config5.m4
deleted file mode 100644
index 9a915abf..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/config5.m4
+++ /dev/null
@@ -1,6 +0,0 @@
-dnl ## XXX - Need a more thorough check of the proper flags to use
-
-if test "$MPM_NAME" = "leader" ; then
-    AC_CHECK_FUNCS(pthread_kill)
-    APACHE_FAST_OUTPUT(server/mpm/$MPM_SUBDIR_NAME/Makefile)
-fi
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/leader.c b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/leader.c
deleted file mode 100644
index 322c2286..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/leader.c
+++ /dev/null
@@ -1,1976 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "apr.h"
-#include "apr_portable.h"
-#include "apr_strings.h"
-#include "apr_file_io.h"
-#include "apr_thread_proc.h"
-#include "apr_signal.h"
-#include "apr_thread_cond.h"
-#include "apr_thread_mutex.h"
-#include "apr_proc_mutex.h"
-#define APR_WANT_STRFUNC
-#include "apr_want.h"
-
-#if APR_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#if APR_HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#if APR_HAVE_SYS_WAIT_H
-#include <sys/wait.h> 
-#endif
-#ifdef HAVE_SYS_PROCESSOR_H
-#include <sys/processor.h> /* for bindprocessor() */
-#endif
-
-#if !APR_HAS_THREADS
-#error The Leader/Follower MPM requires APR threads, but they are unavailable.
-#endif
-
-#define CORE_PRIVATE 
- 
-#include "ap_config.h"
-#include "httpd.h" 
-#include "http_main.h" 
-#include "http_log.h" 
-#include "http_config.h"        /* for read_config */ 
-#include "http_core.h"          /* for get_remote_host */ 
-#include "http_connection.h"
-#include "ap_mpm.h"
-#include "mpm_common.h"
-#include "ap_listen.h"
-#include "scoreboard.h" 
-#include "mpm_default.h"
-#include "apr_poll.h"
-
-#include <signal.h>
-#include <limits.h>             /* for INT_MAX */
-
-#include "apr_atomic.h"
-
-/* Limit on the total --- clients will be locked out if more servers than
- * this are needed.  It is intended solely to keep the server from crashing
- * when things get out of hand.
- *
- * We keep a hard maximum number of servers, for two reasons --- first off,
- * in case something goes seriously wrong, we want to stop the fork bomb
- * short of actually crashing the machine we're running on by filling some
- * kernel table.  Secondly, it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_SERVER_LIMIT
-#define DEFAULT_SERVER_LIMIT 16
-#endif
-
-/* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_SERVER_LIMIT
-#define MAX_SERVER_LIMIT 20000
-#endif
-
-/* Limit on the threads per process.  Clients will be locked out if more than
- * this  * server_limit are needed.
- *
- * We keep this for one reason it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_THREAD_LIMIT
-#define DEFAULT_THREAD_LIMIT 64 
-#endif
-
-/* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_THREAD_LIMIT
-#define MAX_THREAD_LIMIT 20000
-#endif
-
-/*
- * Actual definitions of config globals
- */
-
-int ap_threads_per_child = 0;         /* Worker threads per child */
-static int ap_daemons_to_start = 0;
-static int min_spare_threads = 0;
-static int max_spare_threads = 0;
-static int ap_daemons_limit = 0;
-static int server_limit = DEFAULT_SERVER_LIMIT;
-static int first_server_limit;
-static int thread_limit = DEFAULT_THREAD_LIMIT;
-static int first_thread_limit;
-static int changed_limit_at_restart;
-static int dying = 0;
-static int workers_may_exit = 0;
-static int start_thread_may_exit = 0;
-static int requests_this_child;
-static int num_listensocks = 0;
-static int resource_shortage = 0;
-static int mpm_state = AP_MPMQ_STARTING;
-
-typedef struct worker_wakeup_info worker_wakeup_info;
-
-/* The structure used to pass unique initialization info to each thread */
-typedef struct {
-    int pid;
-    int tid;
-    int sd;
-} proc_info;
-
-
-/* Structure used to pass information to the thread responsible for 
- * creating the rest of the threads.
- */
-typedef struct {
-    apr_thread_t **threads;
-    int child_num_arg;
-    apr_threadattr_t *threadattr;
-} thread_starter;
-
-#define ID_FROM_CHILD_THREAD(c, t)    ((c * thread_limit) + t)
-
-/*
- * The max child slot ever assigned, preserved across restarts.  Necessary
- * to deal with MaxClients changes across AP_SIG_GRACEFUL restarts.  We 
- * use this value to optimize routines that have to scan the entire 
- * scoreboard.
- */
-int ap_max_daemons_limit = -1;
-
-static ap_pod_t *pod;
-
-/* *Non*-shared http_main globals... */
-
-server_rec *ap_server_conf;
-
-/* This MPM respects a couple of runtime flags that can aid in debugging.
- *  Setting the -DNO_DETACH flag will prevent the root process from
- *  detaching from its controlling terminal. Additionally, setting
- * the -DONE_PROCESS flag (which implies -DNO_DETACH) will get you the
- * child_main loop running in the process which originally started up.
- * This gives you a pretty nice debugging environment.  (You'll get a SIGHUP
- * early in standalone_main; just continue through.  This is the server
- * trying to kill off any child processes which it might have lying
- * around --- Apache doesn't keep track of their pids, it just sends
- * SIGHUP to the process group, ignoring it in the root process.
- * Continue through and you'll be fine.).
- */
-
-static int one_process = 0;
-
-#ifdef DEBUG_SIGSTOP
-int raise_sigstop_flags;
-#endif
-
-static apr_pool_t *pconf;                 /* Pool for config stuff */
-static apr_pool_t *pchild;                /* Pool for httpd child stuff */
-
-static pid_t ap_my_pid; /* Linux getpid() doesn't work except in main 
-                           thread. Use this instead */
-static pid_t parent_pid;
-
-/* Locks for accept serialization */
-static apr_proc_mutex_t *accept_mutex;
-
-#ifdef SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-#define SAFE_ACCEPT(stmt) (ap_listeners->next ? (stmt) : APR_SUCCESS)
-#else
-#define SAFE_ACCEPT(stmt) (stmt)
-#endif
-
-
-/* Structure used to wake up an idle worker thread
- */
-struct worker_wakeup_info {
-    apr_uint32_t next; /* index into worker_wakeups array,
-                        * used to build a linked list
-                        */
-    apr_thread_cond_t *cond;
-    apr_thread_mutex_t *mutex;
-};
-
-static worker_wakeup_info *worker_wakeup_create(apr_pool_t *pool)
-{
-    apr_status_t rv;
-    worker_wakeup_info *wakeup;
-
-    wakeup = (worker_wakeup_info *)apr_palloc(pool, sizeof(*wakeup));
-    if ((rv = apr_thread_cond_create(&wakeup->cond, pool)) != APR_SUCCESS) {
-        return NULL;
-    }
-    if ((rv = apr_thread_mutex_create(&wakeup->mutex, APR_THREAD_MUTEX_DEFAULT,
-                                      pool)) != APR_SUCCESS) {
-        return NULL;
-    }
-    /* The wakeup's mutex will be unlocked automatically when
-     * the worker blocks on the condition variable
-     */
-    apr_thread_mutex_lock(wakeup->mutex);
-    return wakeup;
-}
-
-
-/* Structure used to hold a stack of idle worker threads 
- */
-typedef struct {
-    /* 'state' consists of several fields concatenated into a
-     * single 32-bit int for use with the apr_atomic_cas() API:
-     *   state & STACK_FIRST  is the thread ID of the first thread
-     *                        in a linked list of idle threads
-     *   state & STACK_TERMINATED  indicates whether the proc is shutting down
-     *   state & STACK_NO_LISTENER indicates whether the process has
-     *                             no current listener thread
-     */
-    apr_uint32_t state;
-} worker_stack;
-
-#define STACK_FIRST  0xffff
-#define STACK_LIST_END  0xffff
-#define STACK_TERMINATED 0x10000
-#define STACK_NO_LISTENER 0x20000
-
-static worker_wakeup_info **worker_wakeups = NULL;
-
-static worker_stack* worker_stack_create(apr_pool_t *pool, apr_size_t max)
-{
-    worker_stack *stack = (worker_stack *)apr_palloc(pool, sizeof(*stack));
-    stack->state = STACK_NO_LISTENER | STACK_LIST_END;
-    return stack;
-}
-
-static apr_status_t worker_stack_wait(worker_stack *stack,
-                                      apr_uint32_t worker_id)
-{
-    worker_wakeup_info *wakeup = worker_wakeups[worker_id];
-
-    while (1) {
-        apr_uint32_t state = stack->state;
-        if (state & (STACK_TERMINATED | STACK_NO_LISTENER)) {
-            if (state & STACK_TERMINATED) {
-                return APR_EINVAL;
-            }
-            if (apr_atomic_cas(&(stack->state), STACK_LIST_END, state) !=
-                state) {
-                continue;
-            }
-            else {
-                return APR_SUCCESS;
-            }
-        }
-        wakeup->next = state;
-        if (apr_atomic_cas(&(stack->state), worker_id, state) != state) {
-            continue;
-        }
-        else {
-            return apr_thread_cond_wait(wakeup->cond, wakeup->mutex);
-        }
-    }    
-}
-
-static apr_status_t worker_stack_awaken_next(worker_stack *stack)
-{
-
-    while (1) {
-        apr_uint32_t state = stack->state;
-        apr_uint32_t first = state & STACK_FIRST;
-        if (first == STACK_LIST_END) {
-            if (apr_atomic_cas(&(stack->state), state | STACK_NO_LISTENER,
-                               state) != state) {
-                continue;
-            }
-            else {
-                return APR_SUCCESS;
-            }
-        }
-        else {
-            worker_wakeup_info *wakeup = worker_wakeups[first];
-            if (apr_atomic_cas(&(stack->state), (state ^ first) | wakeup->next,
-                               state) != state) {
-                continue;
-            }
-            else {
-                /* Acquire and release the idle worker's mutex to ensure
-                 * that it's actually waiting on its condition variable
-                 */
-                apr_status_t rv;
-                if ((rv = apr_thread_mutex_lock(wakeup->mutex)) !=
-                    APR_SUCCESS) {
-                    return rv;
-                }
-                if ((rv = apr_thread_mutex_unlock(wakeup->mutex)) !=
-                    APR_SUCCESS) {
-                    return rv;
-                }
-                return apr_thread_cond_signal(wakeup->cond);
-            }
-        }
-    }
-}
-
-static apr_status_t worker_stack_term(worker_stack *stack)
-{
-    int i;
-    apr_status_t rv;
-
-    while (1) {
-        apr_uint32_t state = stack->state;
-        if (apr_atomic_cas(&(stack->state), state | STACK_TERMINATED,
-                           state) == state) {
-            break;
-        }
-    }
-    for (i = 0; i < ap_threads_per_child; i++) {
-        if ((rv = worker_stack_awaken_next(stack)) != APR_SUCCESS) {
-            return rv;
-        }
-    }
-    return APR_SUCCESS;
-}
-
-static worker_stack *idle_worker_stack;
-
-#define ST_INIT              0
-#define ST_GRACEFUL          1
-#define ST_UNGRACEFUL        2
-
-static int terminate_mode = ST_INIT;
-
-static void signal_threads(int mode)
-{
-    if (terminate_mode == mode) {
-        return;
-    }
-    terminate_mode = mode;
-    mpm_state = AP_MPMQ_STOPPING;
-    workers_may_exit = 1;
-
-    worker_stack_term(idle_worker_stack);
-}
-
-AP_DECLARE(apr_status_t) ap_mpm_query(int query_code, int *result)
-{
-    switch(query_code){
-        case AP_MPMQ_MAX_DAEMON_USED:
-            *result = ap_max_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_THREADED:
-            *result = AP_MPMQ_STATIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_FORKED:
-            *result = AP_MPMQ_DYNAMIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_DAEMONS:
-            *result = server_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_THREADS:
-            *result = thread_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_THREADS:
-            *result = ap_threads_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_THREADS:    
-            *result = min_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_THREADS:
-            *result = max_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_REQUESTS_DAEMON:
-            *result = ap_max_requests_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_DAEMONS:
-            *result = ap_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MPM_STATE:
-            *result = mpm_state;
-            return APR_SUCCESS;
-    }
-    return APR_ENOTIMPL;
-}
-
-/* a clean exit from a child with proper cleanup */ 
-static void clean_child_exit(int code) __attribute__ ((noreturn));
-static void clean_child_exit(int code)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (pchild) {
-        apr_pool_destroy(pchild);
-    }
-    ap_mpm_pod_close(pod);
-    exit(code);
-}
-
-static void just_die(int sig)
-{
-    clean_child_exit(0);
-}
-
-/*****************************************************************
- * Connection structures and accounting...
- */
-
-/* volatile just in case */
-static int volatile shutdown_pending;
-static int volatile restart_pending;
-static int volatile is_graceful;
-static volatile int child_fatal;
-ap_generation_t volatile ap_my_generation;
-
-/*
- * ap_start_shutdown() and ap_start_restart(), below, are a first stab at
- * functions to initiate shutdown or restart without relying on signals. 
- * Previously this was initiated in sig_term() and restart() signal handlers, 
- * but we want to be able to start a shutdown/restart from other sources --
- * e.g. on Win32, from the service manager. Now the service manager can
- * call ap_start_shutdown() or ap_start_restart() as appropiate.  Note that
- * these functions can also be called by the child processes, since global
- * variables are no longer used to pass on the required action to the parent.
- *
- * These should only be called from the parent process itself, since the
- * parent process will use the shutdown_pending and restart_pending variables
- * to determine whether to shutdown or restart. The child process should
- * call signal_parent() directly to tell the parent to die -- this will
- * cause neither of those variable to be set, which the parent will
- * assume means something serious is wrong (which it will be, for the
- * child to force an exit) and so do an exit anyway.
- */
-
-static void ap_start_shutdown(void)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (shutdown_pending == 1) {
-        /* Um, is this _probably_ not an error, if the user has
-         * tried to do a shutdown twice quickly, so we won't
-         * worry about reporting it.
-         */
-        return;
-    }
-    shutdown_pending = 1;
-}
-
-/* do a graceful restart if graceful == 1 */
-static void ap_start_restart(int graceful)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (restart_pending == 1) {
-        /* Probably not an error - don't bother reporting it */
-        return;
-    }
-    restart_pending = 1;
-    is_graceful = graceful;
-}
-
-static void sig_term(int sig)
-{
-    if (ap_my_pid == parent_pid) {
-        ap_start_shutdown();
-    }
-    else {
-        signal_threads(ST_GRACEFUL);
-    }
-}
-
-static void restart(int sig)
-{
-    ap_start_restart(sig == AP_SIG_GRACEFUL);
-}
-
-static void set_signals(void)
-{
-#ifndef NO_USE_SIGACTION
-    struct sigaction sa;
-#endif
-
-    if (!one_process) {
-        ap_fatal_signal_setup(ap_server_conf, pconf);
-    }
-
-#ifndef NO_USE_SIGACTION
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = 0;
-
-    sa.sa_handler = sig_term;
-    if (sigaction(SIGTERM, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGTERM)");
-#ifdef SIGINT
-    if (sigaction(SIGINT, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGINT)");
-#endif
-#ifdef SIGXCPU
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXCPU, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXCPU)");
-#endif
-#ifdef SIGXFSZ
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXFSZ, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXFSZ)");
-#endif
-#ifdef SIGPIPE
-    sa.sa_handler = SIG_IGN;
-    if (sigaction(SIGPIPE, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGPIPE)");
-#endif
-
-    /* we want to ignore HUPs and AP_SIG_GRACEFUL while we're busy 
-     * processing one */
-    sigaddset(&sa.sa_mask, SIGHUP);
-    sigaddset(&sa.sa_mask, AP_SIG_GRACEFUL);
-    sa.sa_handler = restart;
-    if (sigaction(SIGHUP, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGHUP)");
-    if (sigaction(AP_SIG_GRACEFUL, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(" AP_SIG_GRACEFUL_STRING ")");
-#else
-    if (!one_process) {
-#ifdef SIGXCPU
-        apr_signal(SIGXCPU, SIG_DFL);
-#endif /* SIGXCPU */
-#ifdef SIGXFSZ
-        apr_signal(SIGXFSZ, SIG_DFL);
-#endif /* SIGXFSZ */
-    }
-
-    apr_signal(SIGTERM, sig_term);
-#ifdef SIGHUP
-    apr_signal(SIGHUP, restart);
-#endif /* SIGHUP */
-#ifdef AP_SIG_GRACEFUL
-    apr_signal(AP_SIG_GRACEFUL, restart);
-#endif /* AP_SIG_GRACEFUL */
-#ifdef SIGPIPE
-    apr_signal(SIGPIPE, SIG_IGN);
-#endif /* SIGPIPE */
-
-#endif
-}
-
-/*****************************************************************
- * Here follows a long bunch of generic server bookkeeping stuff...
- */
-
-int ap_graceful_stop_signalled(void)
-    /* XXX this is really a bad confusing obsolete name
-     * maybe it should be ap_mpm_process_exiting?
-     */
-{
-    return workers_may_exit;
-}
-
-/*****************************************************************
- * Child process main loop.
- */
-
-static void process_socket(apr_pool_t *p, apr_socket_t *sock, int my_child_num,
-                           int my_thread_num, apr_bucket_alloc_t *bucket_alloc)
-{
-    conn_rec *current_conn;
-    long conn_id = ID_FROM_CHILD_THREAD(my_child_num, my_thread_num);
-    int csd;
-    ap_sb_handle_t *sbh;
-
-    ap_create_sb_handle(&sbh, p, my_child_num, my_thread_num);
-    apr_os_sock_get(&csd, sock);
-
-    current_conn = ap_run_create_connection(p, ap_server_conf, sock,
-                                            conn_id, sbh, bucket_alloc);
-    if (current_conn) {
-        ap_process_connection(current_conn, sock);
-        ap_lingering_close(current_conn);
-    }
-}
-
-/* requests_this_child has gone to zero or below.  See if the admin coded
-   "MaxRequestsPerChild 0", and keep going in that case.  Doing it this way
-   simplifies the hot path in worker_thread */
-static void check_infinite_requests(void)
-{
-    if (ap_max_requests_per_child) {
-        signal_threads(ST_GRACEFUL);
-    }
-    else {
-        /* wow! if you're executing this code, you may have set a record.
-         * either this child process has served over 2 billion requests, or
-         * you're running a threaded 2.0 on a 16 bit machine.  
-         *
-         * I'll buy pizza and beers at Apachecon for the first person to do
-         * the former without cheating (dorking with INT_MAX, or running with
-         * uncommitted performance patches, for example).    
-         *
-         * for the latter case, you probably deserve a beer too.   Greg Ames
-         */
-            
-        requests_this_child = INT_MAX;      /* keep going */ 
-    }
-}
-
-static void unblock_signal(int sig)
-{
-    sigset_t sig_mask;
-
-    sigemptyset(&sig_mask);
-    sigaddset(&sig_mask, sig);
-#if defined(SIGPROCMASK_SETS_THREAD_MASK)
-    sigprocmask(SIG_UNBLOCK, &sig_mask, NULL);
-#else
-    pthread_sigmask(SIG_UNBLOCK, &sig_mask, NULL);
-#endif
-}
-
-static void *worker_thread(apr_thread_t *thd, void * dummy)
-{
-    proc_info * ti = dummy;
-    int process_slot = ti->pid;
-    int thread_slot = ti->tid;
-    apr_uint32_t my_worker_num = (apr_uint32_t)(ti->tid);
-    apr_pool_t *tpool = apr_thread_pool_get(thd);
-    void *csd = NULL;
-    apr_allocator_t *allocator;
-    apr_pool_t *ptrans;                /* Pool for per-transaction stuff */
-    apr_bucket_alloc_t *bucket_alloc;
-    int n;
-    apr_pollfd_t *pollset;
-    apr_status_t rv;
-    ap_listen_rec *lr, *last_lr = ap_listeners;
-    int is_listener;
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_STARTING, NULL);
-
-    free(ti);
-
-    apr_allocator_create(&allocator);
-    apr_allocator_max_free_set(allocator, ap_max_mem_free);
-    /* XXX: why is ptrans's parent not tpool?  --jcw 08/2003 */
-    apr_pool_create_ex(&ptrans, NULL, NULL, allocator);
-    apr_allocator_owner_set(allocator, ptrans);
-    bucket_alloc = apr_bucket_alloc_create_ex(allocator);
-
-    apr_poll_setup(&pollset, num_listensocks, tpool);
-    for(lr = ap_listeners ; lr != NULL ; lr = lr->next)
-        apr_poll_socket_add(pollset, lr->sd, APR_POLLIN);
-
-    /* TODO: Switch to a system where threads reuse the results from earlier
-       poll calls - manoj */
-    is_listener = 0;
-    while (!workers_may_exit) {
-
-        ap_update_child_status_from_indexes(process_slot, thread_slot,
-                                            SERVER_READY, NULL);
-        if (!is_listener) {
-            /* Wait until it's our turn to become the listener */
-            if ((rv = worker_stack_wait(idle_worker_stack, my_worker_num)) !=
-                APR_SUCCESS) {
-                if (rv != APR_EINVAL) {
-                    ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                                 "worker_stack_wait failed. Shutting down");
-                }
-                break;
-            }
-            if (workers_may_exit) {
-                break;
-            }
-            is_listener = 1;
-        }
-
-        /* TODO: requests_this_child should be synchronized - aaron */
-        if (requests_this_child <= 0) {
-            check_infinite_requests();
-        }
-        if (workers_may_exit) break;
-
-        if ((rv = SAFE_ACCEPT(apr_proc_mutex_lock(accept_mutex)))
-            != APR_SUCCESS) {
-            int level = APLOG_EMERG;
-
-            if (workers_may_exit) {
-                break;
-            }
-            if (ap_scoreboard_image->parent[process_slot].generation != 
-                ap_scoreboard_image->global->running_generation) {
-                level = APLOG_DEBUG; /* common to get these at restart time */
-            }
-            ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                         "apr_proc_mutex_lock failed. Attempting to shutdown "
-                         "process gracefully.");
-            signal_threads(ST_GRACEFUL);
-            break;                    /* skip the lock release */
-        }
-
-        if (!ap_listeners->next) {
-            /* Only one listener, so skip the poll */
-            lr = ap_listeners;
-        }
-        else {
-            while (!workers_may_exit) {
-                apr_status_t ret;
-                apr_int16_t event;
-
-                ret = apr_poll(pollset, num_listensocks, &n, -1);
-                if (ret != APR_SUCCESS) {
-                    if (APR_STATUS_IS_EINTR(ret)) {
-                        continue;
-                    }
-
-                    /* apr_poll() will only return errors in catastrophic
-                     * circumstances. Let's try exiting gracefully, for now. */
-                    ap_log_error(APLOG_MARK, APLOG_ERR, ret, (const server_rec *)
-                                 ap_server_conf, "apr_poll: (listen)");
-                    signal_threads(ST_GRACEFUL);
-                }
-
-                if (workers_may_exit) break;
-
-                /* find a listener */
-                lr = last_lr;
-                do {
-                    lr = lr->next;
-                    if (lr == NULL) {
-                        lr = ap_listeners;
-                    }
-                    /* XXX: Should we check for POLLERR? */
-                    apr_poll_revents_get(&event, lr->sd, pollset);
-                    if (event & APR_POLLIN) {
-                        last_lr = lr;
-                        goto got_fd;
-                    }
-                } while (lr != last_lr);
-            }
-        }
-    got_fd:
-        if (!workers_may_exit) {
-            rv = lr->accept_func(&csd, lr, ptrans);
-            /* later we trash rv and rely on csd to indicate success/failure */
-            AP_DEBUG_ASSERT(rv == APR_SUCCESS || !csd);
-
-            if (rv == APR_EGENERAL) {
-                /* E[NM]FILE, ENOMEM, etc */
-                resource_shortage = 1;
-                signal_threads(ST_GRACEFUL);
-            }
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                int level = APLOG_EMERG;
-
-                if (workers_may_exit) {
-                    break;
-                }
-                if (ap_scoreboard_image->parent[process_slot].generation != 
-                    ap_scoreboard_image->global->running_generation) {
-                    level = APLOG_DEBUG; /* common to get these at restart time */
-                }
-                ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            if (csd != NULL) {
-                is_listener = 0;
-                worker_stack_awaken_next(idle_worker_stack);
-                process_socket(ptrans, csd, process_slot,
-                               thread_slot, bucket_alloc);
-                apr_pool_clear(ptrans);
-                requests_this_child--;
-            }
-            if ((ap_mpm_pod_check(pod) == APR_SUCCESS) ||
-                (ap_my_generation !=
-                 ap_scoreboard_image->global->running_generation)) {
-                signal_threads(ST_GRACEFUL);
-                break;
-            }
-        }
-        else {
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            break;
-        }
-    }
-
-    dying = 1;
-    ap_scoreboard_image->parent[process_slot].quiescing = 1;
-
-    worker_stack_term(idle_worker_stack);
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot,
-        (dying) ? SERVER_DEAD : SERVER_GRACEFUL, (request_rec *) NULL);
-
-    apr_bucket_alloc_destroy(bucket_alloc);
-
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static int check_signal(int signum)
-{
-    switch (signum) {
-    case SIGTERM:
-    case SIGINT:
-        return 1;
-    }
-    return 0;
-}
-
-/* XXX under some circumstances not understood, children can get stuck
- *     in start_threads forever trying to take over slots which will
- *     never be cleaned up; for now there is an APLOG_DEBUG message issued
- *     every so often when this condition occurs
- */
-static void * APR_THREAD_FUNC start_threads(apr_thread_t *thd, void *dummy)
-{
-    thread_starter *ts = dummy;
-    apr_thread_t **threads = ts->threads;
-    apr_threadattr_t *thread_attr = ts->threadattr;
-    int child_num_arg = ts->child_num_arg;
-    int my_child_num = child_num_arg;
-    proc_info *my_info;
-    apr_status_t rv;
-    int i;
-    int threads_created = 0;
-    int loops;
-    int prev_threads_created;
-
-    idle_worker_stack = worker_stack_create(pchild, ap_threads_per_child);
-    if (idle_worker_stack == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, 0, ap_server_conf,
-                     "worker_stack_create() failed");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    worker_wakeups = (worker_wakeup_info **)
-        apr_palloc(pchild, sizeof(worker_wakeup_info *) *
-                   ap_threads_per_child);
-
-    loops = prev_threads_created = 0;
-    while (1) {
-        for (i = 0; i < ap_threads_per_child; i++) {
-            int status = ap_scoreboard_image->servers[child_num_arg][i].status;
-            worker_wakeup_info *wakeup;
-
-            if (status != SERVER_GRACEFUL && status != SERVER_DEAD) {
-                continue;
-            }
-
-            wakeup = worker_wakeup_create(pchild);
-            if (wakeup == NULL) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT|APLOG_NOERRNO, 0,
-                             ap_server_conf, "worker_wakeup_create failed");
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            worker_wakeups[threads_created] = wakeup;
-            my_info = (proc_info *)malloc(sizeof(proc_info));
-            if (my_info == NULL) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                             "malloc: out of memory");
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            my_info->pid = my_child_num;
-            my_info->tid = i;
-            my_info->sd = 0;
-        
-            /* We are creating threads right now */
-            ap_update_child_status_from_indexes(my_child_num, i,
-                                                SERVER_STARTING, NULL);
-            /* We let each thread update its own scoreboard entry.  This is
-             * done because it lets us deal with tid better.
-             */
-            rv = apr_thread_create(&threads[i], thread_attr, 
-                                   worker_thread, my_info, pchild);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                    "apr_thread_create: unable to create worker thread");
-                /* In case system resources are maxxed out, we don't want
-                   Apache running away with the CPU trying to fork over and
-                   over and over again if we exit. */
-                apr_sleep(10 * APR_USEC_PER_SEC);
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            threads_created++;
-        }
-        if (start_thread_may_exit || threads_created == ap_threads_per_child) {
-            break;
-        }
-        /* wait for previous generation to clean up an entry */
-        apr_sleep(1 * APR_USEC_PER_SEC);
-        ++loops;
-        if (loops % 120 == 0) { /* every couple of minutes */
-            if (prev_threads_created == threads_created) {
-                ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                             "child %" APR_PID_T_FMT " isn't taking over "
-                             "slots very quickly (%d of %d)",
-                             ap_my_pid, threads_created, ap_threads_per_child);
-            }
-            prev_threads_created = threads_created;
-        }
-    }
-    
-    /* What state should this child_main process be listed as in the 
-     * scoreboard...?
-     *  ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING, 
-     *                                      (request_rec *) NULL);
-     * 
-     *  This state should be listed separately in the scoreboard, in some kind
-     *  of process_status, not mixed in with the worker threads' status.   
-     *  "life_status" is almost right, but it's in the worker's structure, and 
-     *  the name could be clearer.   gla
-     */
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static void join_workers(apr_thread_t **threads)
-{
-    int i;
-    apr_status_t rv, thread_rv;
-
-    for (i = 0; i < ap_threads_per_child; i++) {
-        if (threads[i]) { /* if we ever created this thread */
-            rv = apr_thread_join(&thread_rv, threads[i]);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "apr_thread_join: unable to join worker "
-                             "thread %d",
-                             i);
-            }
-        }
-    }
-}
-
-static void join_start_thread(apr_thread_t *start_thread_id)
-{
-    apr_status_t rv, thread_rv;
-
-    start_thread_may_exit = 1; /* tell it to give up in case it is still 
-                                * trying to take over slots from a 
-                                * previous generation
-                                */
-    rv = apr_thread_join(&thread_rv, start_thread_id);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                     "apr_thread_join: unable to join the start "
-                     "thread");
-    }
-}
-
-static void child_main(int child_num_arg)
-{
-    apr_thread_t **threads;
-    apr_status_t rv;
-    thread_starter *ts;
-    apr_threadattr_t *thread_attr;
-    apr_thread_t *start_thread_id;
-
-    mpm_state = AP_MPMQ_STARTING; /* for benefit of any hooks that run as this
-                                  * child initializes
-                                  */
-
-    ap_my_pid = getpid();
-    ap_fatal_signal_child_setup(ap_server_conf);
-    apr_pool_create(&pchild, pconf);
-
-    /*stuff to do before we switch id's, so we have permissions.*/
-    ap_reopen_scoreboard(pchild, NULL, 0);
-
-    rv = SAFE_ACCEPT(apr_proc_mutex_child_init(&accept_mutex, ap_lock_fname,
-                                               pchild));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize cross-process lock in child");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (unixd_setup_child()) {
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ap_run_child_init(pchild, ap_server_conf);
-
-    /* done with init critical section */
-
-    /* Just use the standard apr_setup_signal_thread to block all signals
-     * from being received.  The child processes no longer use signals for
-     * any communication with the parent process.
-     */
-    rv = apr_setup_signal_thread();
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize signal thread");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (ap_max_requests_per_child) {
-        requests_this_child = ap_max_requests_per_child;
-    }
-    else {
-        /* coding a value of zero means infinity */
-        requests_this_child = INT_MAX;
-    }
-    
-    /* Setup worker threads */
-
-    /* clear the storage; we may not create all our threads immediately, 
-     * and we want a 0 entry to indicate a thread which was not created
-     */
-    threads = (apr_thread_t **)calloc(1, 
-                                sizeof(apr_thread_t *) * ap_threads_per_child);
-    if (threads == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                     "malloc: out of memory");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ts = (thread_starter *)apr_palloc(pchild, sizeof(*ts));
-
-    apr_threadattr_create(&thread_attr, pchild);
-    /* 0 means PTHREAD_CREATE_JOINABLE */
-    apr_threadattr_detach_set(thread_attr, 0);
-
-    ts->threads = threads;
-    ts->child_num_arg = child_num_arg;
-    ts->threadattr = thread_attr;
-
-    rv = apr_thread_create(&start_thread_id, thread_attr, start_threads,
-                           ts, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "apr_thread_create: unable to create worker thread");
-        /* In case system resources are maxxed out, we don't want
-           Apache running away with the CPU trying to fork over and
-           over and over again if we exit. */
-        apr_sleep(10 * APR_USEC_PER_SEC);
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    mpm_state = AP_MPMQ_RUNNING;
-
-    /* If we are only running in one_process mode, we will want to
-     * still handle signals. */
-    if (one_process) {
-        /* Block until we get a terminating signal. */
-        apr_signal_thread(check_signal);
-        /* make sure the start thread has finished; signal_threads() 
-         * and join_workers() depend on that
-         */
-        /* XXX join_start_thread() won't be awakened if one of our
-         *     threads encounters a critical error and attempts to
-         *     shutdown this child
-         */
-        join_start_thread(start_thread_id);
-        signal_threads(ST_UNGRACEFUL); /* helps us terminate a little more
-                           * quickly than the dispatch of the signal thread
-                           * beats the Pipe of Death and the browsers
-                           */
-        /* A terminating signal was received. Now join each of the
-         * workers to clean them up.
-         *   If the worker already exited, then the join frees
-         *   their resources and returns.
-         *   If the worker hasn't exited, then this blocks until
-         *   they have (then cleans up).
-         */
-        join_workers(threads);
-    }
-    else { /* !one_process */
-        /* remove SIGTERM from the set of blocked signals...  if one of
-         * the other threads in the process needs to take us down
-         * (e.g., for MaxRequestsPerChild) it will send us SIGTERM
-         */
-        unblock_signal(SIGTERM);
-        join_start_thread(start_thread_id);
-        join_workers(threads);
-    }
-
-    free(threads);
-
-    clean_child_exit(resource_shortage ? APEXIT_CHILDSICK : 0);
-}
-
-static int make_child(server_rec *s, int slot) 
-{
-    int pid;
-
-    if (slot + 1 > ap_max_daemons_limit) {
-        ap_max_daemons_limit = slot + 1;
-    }
-
-    if (one_process) {
-        set_signals();
-        ap_scoreboard_image->parent[slot].pid = getpid();
-        child_main(slot);
-    }
-
-    if ((pid = fork()) == -1) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, s, 
-                     "fork: Unable to fork new process");
-
-        /* fork didn't succeed. Fix the scoreboard or else
-         * it will say SERVER_STARTING forever and ever
-         */
-        ap_update_child_status_from_indexes(slot, 0, SERVER_DEAD, NULL);
-
-        /* In case system resources are maxxed out, we don't want
-           Apache running away with the CPU trying to fork over and
-           over and over again. */
-        apr_sleep(10 * APR_USEC_PER_SEC);
-
-        return -1;
-    }
-
-    if (!pid) {
-#ifdef HAVE_BINDPROCESSOR
-        /* By default, AIX binds to a single processor.  This bit unbinds
-         * children which will then bind to another CPU.
-         */
-        int status = bindprocessor(BINDPROCESS, (int)getpid(),
-                               PROCESSOR_CLASS_ANY);
-        if (status != OK)
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, 
-                         ap_server_conf,
-                         "processor unbind failed %d", status);
-#endif
-        RAISE_SIGSTOP(MAKE_CHILD);
-
-        apr_signal(SIGTERM, just_die);
-        child_main(slot);
-
-        clean_child_exit(0);
-    }
-    /* else */
-    ap_scoreboard_image->parent[slot].quiescing = 0;
-    ap_scoreboard_image->parent[slot].pid = pid;
-    return 0;
-}
-
-/* start up a bunch of children */
-static void startup_children(int number_to_start)
-{
-    int i;
-
-    for (i = 0; number_to_start && i < ap_daemons_limit; ++i) {
-        if (ap_scoreboard_image->parent[i].pid != 0) {
-            continue;
-        }
-        if (make_child(ap_server_conf, i) < 0) {
-            break;
-        }
-        --number_to_start;
-    }
-}
-
-
-/*
- * idle_spawn_rate is the number of children that will be spawned on the
- * next maintenance cycle if there aren't enough idle servers.  It is
- * doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by
- * without the need to spawn.
- */
-static int idle_spawn_rate = 1;
-#ifndef MAX_SPAWN_RATE
-#define MAX_SPAWN_RATE        (32)
-#endif
-static int hold_off_on_exponential_spawning;
-
-static void perform_idle_server_maintenance(void)
-{
-    int i, j;
-    int idle_thread_count;
-    worker_score *ws;
-    process_score *ps;
-    int free_length;
-    int totally_free_length = 0;
-    int free_slots[MAX_SPAWN_RATE];
-    int last_non_dead;
-    int total_non_dead;
-
-    /* initialize the free_list */
-    free_length = 0;
-
-    idle_thread_count = 0;
-    last_non_dead = -1;
-    total_non_dead = 0;
-
-    for (i = 0; i < ap_daemons_limit; ++i) {
-        /* Initialization to satisfy the compiler. It doesn't know
-         * that ap_threads_per_child is always > 0 */
-        int status = SERVER_DEAD;
-        int any_dying_threads = 0;
-        int any_dead_threads = 0;
-        int all_dead_threads = 1;
-
-        if (i >= ap_max_daemons_limit && totally_free_length == idle_spawn_rate)
-            break;
-        ps = &ap_scoreboard_image->parent[i];
-        for (j = 0; j < ap_threads_per_child; j++) {
-            ws = &ap_scoreboard_image->servers[i][j];
-            status = ws->status;
-
-            /* XXX any_dying_threads is probably no longer needed    GLA */
-            any_dying_threads = any_dying_threads || 
-                                (status == SERVER_GRACEFUL);
-            any_dead_threads = any_dead_threads || (status == SERVER_DEAD);
-            all_dead_threads = all_dead_threads &&
-                                   (status == SERVER_DEAD ||
-                                    status == SERVER_GRACEFUL);
-
-            /* We consider a starting server as idle because we started it
-             * at least a cycle ago, and if it still hasn't finished starting
-             * then we're just going to swamp things worse by forking more.
-             * So we hopefully won't need to fork more if we count it.
-             * This depends on the ordering of SERVER_READY and SERVER_STARTING.
-             */
-            if (status <= SERVER_READY && status != SERVER_DEAD &&
-                    !ps->quiescing &&
-                    ps->generation == ap_my_generation &&
-                 /* XXX the following shouldn't be necessary if we clean up 
-                  *     properly after seg faults, but we're not yet    GLA 
-                  */     
-                    ps->pid != 0) {
-                ++idle_thread_count;
-            }
-        }
-        if (any_dead_threads && totally_free_length < idle_spawn_rate 
-                && (!ps->pid               /* no process in the slot */
-                    || ps->quiescing)) {   /* or at least one is going away */
-            if (all_dead_threads) {
-                /* great! we prefer these, because the new process can
-                 * start more threads sooner.  So prioritize this slot 
-                 * by putting it ahead of any slots with active threads.
-                 *
-                 * first, make room by moving a slot that's potentially still
-                 * in use to the end of the array
-                 */
-                free_slots[free_length] = free_slots[totally_free_length];
-                free_slots[totally_free_length++] = i;
-            }
-            else {
-                /* slot is still in use - back of the bus
-                 */
-            free_slots[free_length] = i;
-            }
-            ++free_length;
-        }
-        /* XXX if (!ps->quiescing)     is probably more reliable  GLA */
-        if (!any_dying_threads) {
-            last_non_dead = i;
-            ++total_non_dead;
-        }
-    }
-    ap_max_daemons_limit = last_non_dead + 1;
-
-    if (idle_thread_count > max_spare_threads) {
-        /* Kill off one child */
-        ap_mpm_pod_signal(pod);
-        idle_spawn_rate = 1;
-    }
-    else if (idle_thread_count < min_spare_threads) {
-        /* terminate the free list */
-        if (free_length == 0) {
-            /* only report this condition once */
-            static int reported = 0;
-            
-            if (!reported) {
-                ap_log_error(APLOG_MARK, APLOG_ERR, 0, 
-                             ap_server_conf,
-                             "server reached MaxClients setting, consider"
-                             " raising the MaxClients setting");
-                reported = 1;
-            }
-            idle_spawn_rate = 1;
-        }
-        else {
-            if (free_length > idle_spawn_rate) {
-                free_length = idle_spawn_rate;
-            }
-            if (idle_spawn_rate >= 8) {
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0, 
-                             ap_server_conf,
-                             "server seems busy, (you may need "
-                             "to increase StartServers, ThreadsPerChild "
-                             "or Min/MaxSpareThreads), "
-                             "spawning %d children, there are around %d idle "
-                             "threads, and %d total children", free_length,
-                             idle_thread_count, total_non_dead);
-            }
-            for (i = 0; i < free_length; ++i) {
-                make_child(ap_server_conf, free_slots[i]);
-            }
-            /* the next time around we want to spawn twice as many if this
-             * wasn't good enough, but not if we've just done a graceful
-             */
-            if (hold_off_on_exponential_spawning) {
-                --hold_off_on_exponential_spawning;
-            }
-            else if (idle_spawn_rate < MAX_SPAWN_RATE) {
-                idle_spawn_rate *= 2;
-            }
-        }
-    }
-    else {
-      idle_spawn_rate = 1;
-    }
-}
-
-static void server_main_loop(int remaining_children_to_start)
-{
-    int child_slot;
-    apr_exit_why_e exitwhy;
-    int status, processed_status;
-    apr_proc_t pid;
-    int i;
-
-    while (!restart_pending && !shutdown_pending) {
-        ap_wait_or_timeout(&exitwhy, &status, &pid, pconf);
-        
-        if (pid.pid != -1) {
-            processed_status = ap_process_child_status(&pid, exitwhy, status);
-            if (processed_status == APEXIT_CHILDFATAL) {
-                shutdown_pending = 1;
-                child_fatal = 1;
-                return;
-            }
-            /* non-fatal death... note that it's gone in the scoreboard. */
-            child_slot = find_child_by_pid(&pid);
-            if (child_slot >= 0) {
-                for (i = 0; i < ap_threads_per_child; i++)
-                    ap_update_child_status_from_indexes(child_slot, i, SERVER_DEAD, 
-                                                        (request_rec *) NULL);
-                
-                ap_scoreboard_image->parent[child_slot].pid = 0;
-                ap_scoreboard_image->parent[child_slot].quiescing = 0;
-                if (processed_status == APEXIT_CHILDSICK) {
-                    /* resource shortage, minimize the fork rate */
-                    idle_spawn_rate = 1;
-                }
-                else if (remaining_children_to_start
-                    && child_slot < ap_daemons_limit) {
-                    /* we're still doing a 1-for-1 replacement of dead
-                     * children with new children
-                     */
-                    make_child(ap_server_conf, child_slot);
-                    --remaining_children_to_start;
-                }
-#if APR_HAS_OTHER_CHILD
-            }
-            else if (apr_proc_other_child_read(&pid, status) == 0) {
-                /* handled */
-#endif
-            }
-            else if (is_graceful) {
-                /* Great, we've probably just lost a slot in the
-                 * scoreboard.  Somehow we don't know about this child.
-                 */
-                ap_log_error(APLOG_MARK, APLOG_WARNING, 0,
-                             ap_server_conf,
-                             "long lost child came home! (pid %ld)",
-                             (long)pid.pid);
-            }
-            /* Don't perform idle maintenance when a child dies,
-             * only do it when there's a timeout.  Remember only a
-             * finite number of children can die, and it's pretty
-             * pathological for a lot to die suddenly.
-             */
-            continue;
-        }
-        else if (remaining_children_to_start) {
-            /* we hit a 1 second timeout in which none of the previous
-             * generation of children needed to be reaped... so assume
-             * they're all done, and pick up the slack if any is left.
-             */
-            startup_children(remaining_children_to_start);
-            remaining_children_to_start = 0;
-            /* In any event we really shouldn't do the code below because
-             * few of the servers we just started are in the IDLE state
-             * yet, so we'd mistakenly create an extra server.
-             */
-            continue;
-        }
-
-        perform_idle_server_maintenance();
-    }
-}
-
-int ap_mpm_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s)
-{
-    int remaining_children_to_start;
-    apr_status_t rv;
-
-    ap_log_pid(pconf, ap_pid_fname);
-
-    first_server_limit = server_limit;
-    first_thread_limit = thread_limit;
-    if (changed_limit_at_restart) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s,
-                     "WARNING: Attempt to change ServerLimit or ThreadLimit "
-                     "ignored during restart");
-        changed_limit_at_restart = 0;
-    }
-    
-    /* Initialize cross-process accept lock */
-    ap_lock_fname = apr_psprintf(_pconf, "%s.%" APR_PID_T_FMT,
-                                 ap_server_root_relative(_pconf, ap_lock_fname),
-                                 ap_my_pid);
-
-    rv = apr_proc_mutex_create(&accept_mutex, ap_lock_fname, 
-                               ap_accept_lock_mech, _pconf);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                     "Couldn't create accept lock");
-        mpm_state = AP_MPMQ_STOPPING;
-        return 1;
-    }
-
-#if APR_USE_SYSVSEM_SERIALIZE
-    if (ap_accept_lock_mech == APR_LOCK_DEFAULT || 
-        ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#else
-    if (ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#endif
-        rv = unixd_set_proc_mutex_perms(accept_mutex);
-        if (rv != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                         "Couldn't set permissions on cross-process lock; "
-                         "check User and Group directives");
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-    }
-
-    if (!is_graceful) {
-        if (ap_run_pre_mpm(s->process->pool, SB_SHARED) != OK) {
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-        /* fix the generation number in the global score; we just got a new,
-         * cleared scoreboard
-         */
-        ap_scoreboard_image->global->running_generation = ap_my_generation;
-    }
-
-    set_signals();
-    /* Don't thrash... */
-    if (max_spare_threads < min_spare_threads + ap_threads_per_child)
-        max_spare_threads = min_spare_threads + ap_threads_per_child;
-
-    /* If we're doing a graceful_restart then we're going to see a lot
-     * of children exiting immediately when we get into the main loop
-     * below (because we just sent them AP_SIG_GRACEFUL).  This happens pretty
-     * rapidly... and for each one that exits we'll start a new one until
-     * we reach at least daemons_min_free.  But we may be permitted to
-     * start more than that, so we'll just keep track of how many we're
-     * supposed to start up without the 1 second penalty between each fork.
-     */
-    remaining_children_to_start = ap_daemons_to_start;
-    if (remaining_children_to_start > ap_daemons_limit) {
-        remaining_children_to_start = ap_daemons_limit;
-    }
-    if (!is_graceful) {
-        startup_children(remaining_children_to_start);
-        remaining_children_to_start = 0;
-    }
-    else {
-        /* give the system some time to recover before kicking into
-            * exponential mode */
-        hold_off_on_exponential_spawning = 10;
-    }
-
-    ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                "%s configured -- resuming normal operations",
-                ap_get_server_version());
-    ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf,
-                "Server built: %s", ap_get_server_built());
-#ifdef AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-		"AcceptMutex: %s (default: %s)",
-		apr_proc_mutex_name(accept_mutex),
-		apr_proc_mutex_defname());
-#endif
-    restart_pending = shutdown_pending = 0;
-    mpm_state = AP_MPMQ_RUNNING;
-
-    server_main_loop(remaining_children_to_start);
-    mpm_state = AP_MPMQ_STOPPING;
-
-    if (shutdown_pending) {
-        /* Time to gracefully shut down:
-         * Kill child processes, tell them to call child_exit, etc...
-         * (By "gracefully" we don't mean graceful in the same sense as 
-         * "apachectl graceful" where we allow old connections to finish.)
-         */
-	if (unixd_killpg(getpgrp(), SIGTERM) < 0) {
-	    ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, "killpg SIGTERM");
-	}
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-
-        if (!child_fatal) {
-            /* cleanup pid file on normal shutdown */
-            const char *pidfile = NULL;
-            pidfile = ap_server_root_relative (pconf, ap_pid_fname);
-            if ( pidfile != NULL && unlink(pidfile) == 0)
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0,
-                             ap_server_conf,
-                             "removed PID file %s (pid=%ld)",
-                             pidfile, (long)getpid());
-    
-            ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                         ap_server_conf, "caught SIGTERM, shutting down");
-        }
-        return 1;
-    }
-
-    /* we've been told to restart */
-    apr_signal(SIGHUP, SIG_IGN);
-
-    if (one_process) {
-        /* not worth thinking about */
-        return 1;
-    }
-
-    /* advance to the next generation */
-    /* XXX: we really need to make sure this new generation number isn't in
-     * use by any of the children.
-     */
-    ++ap_my_generation;
-    ap_scoreboard_image->global->running_generation = ap_my_generation;
-    
-    if (is_graceful) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                     AP_SIG_GRACEFUL_STRING " received.  Doing graceful restart");
-        /* wake up the children...time to die.  But we'll have more soon */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit);
-    
-
-        /* This is mostly for debugging... so that we know what is still
-         * gracefully dealing with existing request.
-         */
-        
-    }
-    else {
-        /* Kill 'em all.  Since the child acts the same on the parents SIGTERM 
-         * and a SIGHUP, we may as well use the same signal, because some user
-         * pthreads are stealing signals from us left and right.
-         */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit);
-
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                    "SIGHUP received.  Attempting to restart");
-    }
-
-    return 0;
-}
-
-/* This really should be a post_config hook, but the error log is already
- * redirected by that point, so we need to do this in the open_logs phase.
- */
-static int leader_open_logs(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
-{
-    apr_status_t rv;
-
-    pconf = p;
-    ap_server_conf = s;
-
-    if ((num_listensocks = ap_setup_listeners(ap_server_conf)) < 1) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT|APLOG_STARTUP, 0,
-                     NULL, "no listening sockets available, shutting down");
-        return DONE;
-    }
-
-    if (!one_process) {
-        if ((rv = ap_mpm_pod_open(pconf, &pod))) {
-            ap_log_error(APLOG_MARK, APLOG_CRIT|APLOG_STARTUP, rv, NULL,
-                    "Could not open pipe-of-death.");
-            return DONE;
-        }
-    }
-    return OK;
-}
-
-static int leader_pre_config(apr_pool_t *pconf, apr_pool_t *plog, 
-                             apr_pool_t *ptemp)
-{
-    static int restart_num = 0;
-    int no_detach, debug, foreground;
-    ap_directive_t *pdir;
-    ap_directive_t *max_clients = NULL;
-    apr_status_t rv;
-
-    mpm_state = AP_MPMQ_STARTING;
-
-    /* make sure that "ThreadsPerChild" gets set before "MaxClients" */
-    for (pdir = ap_conftree; pdir != NULL; pdir = pdir->next) {
-        if (strncasecmp(pdir->directive, "ThreadsPerChild", 15) == 0) {
-            if (!max_clients) {
-                break; /* we're in the clear, got ThreadsPerChild first */
-            }
-            else {
-                /* now to swap the data */
-                ap_directive_t temp;
-
-                temp.directive = pdir->directive;
-                temp.args = pdir->args;
-                /* Make sure you don't change 'next', or you may get loops! */
-                /* XXX: first_child, parent, and data can never be set
-                 * for these directives, right? -aaron */
-                temp.filename = pdir->filename;
-                temp.line_num = pdir->line_num;
-
-                pdir->directive = max_clients->directive;
-                pdir->args = max_clients->args;
-                pdir->filename = max_clients->filename;
-                pdir->line_num = max_clients->line_num;
-                
-                max_clients->directive = temp.directive;
-                max_clients->args = temp.args;
-                max_clients->filename = temp.filename;
-                max_clients->line_num = temp.line_num;
-                break;
-            }
-        }
-        else if (!max_clients
-                 && strncasecmp(pdir->directive, "MaxClients", 10) == 0) {
-            max_clients = pdir;
-        }
-    }
-
-    debug = ap_exists_config_define("DEBUG");
-
-    if (debug) {
-        foreground = one_process = 1;
-        no_detach = 0;
-    }
-    else {
-        one_process = ap_exists_config_define("ONE_PROCESS");
-        no_detach = ap_exists_config_define("NO_DETACH");
-        foreground = ap_exists_config_define("FOREGROUND");
-    }
-
-    /* sigh, want this only the second time around */
-    if (restart_num++ == 1) {
-        is_graceful = 0;
-
-        if (!one_process && !foreground) {
-            rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND
-                                           : APR_PROC_DETACH_DAEMONIZE);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL,
-                             "apr_proc_detach failed");
-                return HTTP_INTERNAL_SERVER_ERROR;
-            }
-        }
-        parent_pid = ap_my_pid = getpid();
-    }
-
-    unixd_pre_config(ptemp);
-    ap_listen_pre_config();
-    ap_daemons_to_start = DEFAULT_START_DAEMON;
-    min_spare_threads = DEFAULT_MIN_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    max_spare_threads = DEFAULT_MAX_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    ap_daemons_limit = server_limit;
-    ap_threads_per_child = DEFAULT_THREADS_PER_CHILD;
-    ap_pid_fname = DEFAULT_PIDLOG;
-    ap_lock_fname = DEFAULT_LOCKFILE;
-    ap_max_requests_per_child = DEFAULT_MAX_REQUESTS_PER_CHILD;
-    ap_extended_status = 0;
-#ifdef AP_MPM_WANT_SET_MAX_MEM_FREE
-	ap_max_mem_free = APR_ALLOCATOR_MAX_FREE_UNLIMITED;
-#endif
-
-    apr_cpystrn(ap_coredump_dir, ap_server_root, sizeof(ap_coredump_dir));
-
-    return OK;
-}
-
-static void leader_hooks(apr_pool_t *p)
-{
-    /* The leader open_logs phase must run before the core's, or stderr
-     * will be redirected to a file, and the messages won't print to the
-     * console.
-     */
-    static const char *const aszSucc[] = {"core.c", NULL};
-    one_process = 0;
-
-    ap_hook_open_logs(leader_open_logs, NULL, aszSucc, APR_HOOK_MIDDLE);
-    /* we need to set the MPM state before other pre-config hooks use MPM query
-     * to retrieve it, so register as REALLY_FIRST
-     */
-    ap_hook_pre_config(leader_pre_config, NULL, NULL, APR_HOOK_REALLY_FIRST);
-}
-
-static const char *set_daemons_to_start(cmd_parms *cmd, void *dummy,
-                                        const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_daemons_to_start = atoi(arg);
-    return NULL;
-}
-
-static const char *set_min_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    min_spare_threads = atoi(arg);
-    if (min_spare_threads <= 0) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MinSpareThreads set to non-positive.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Resetting to 1 to avoid almost certain Apache failure.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Please read the documentation.");
-       min_spare_threads = 1;
-    }
-       
-    return NULL;
-}
-
-static const char *set_max_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    max_spare_threads = atoi(arg);
-    return NULL;
-}
-
-static const char *set_max_clients (cmd_parms *cmd, void *dummy,
-                                     const char *arg) 
-{
-    int max_clients;
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    /* It is ok to use ap_threads_per_child here because we are
-     * sure that it gets set before MaxClients in the pre_config stage. */
-    max_clients = atoi(arg);
-    if (max_clients < ap_threads_per_child) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) must be at least as large",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " large as ThreadsPerChild (%d). Automatically",
-                    ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " increasing MaxClients to %d.",
-                    ap_threads_per_child);
-       max_clients = ap_threads_per_child;
-    }
-    ap_daemons_limit = max_clients / ap_threads_per_child;
-    if ((max_clients > 0) && (max_clients % ap_threads_per_child)) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) is not an integer multiple",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " of ThreadsPerChild (%d), lowering MaxClients to %d",
-                    ap_threads_per_child,
-                    ap_daemons_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " for a maximum of %d child processes,",
-                    ap_daemons_limit);
-       max_clients = ap_daemons_limit * ap_threads_per_child; 
-    }
-    if (ap_daemons_limit > server_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients of %d would require %d servers,",
-                    max_clients, ap_daemons_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " and would exceed the ServerLimit value of %d.",
-                    server_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " Automatically lowering MaxClients to %d.  To increase,",
-                    server_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " please see the ServerLimit directive.");
-       ap_daemons_limit = server_limit;
-    } 
-    else if (ap_daemons_limit < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require MaxClients > 0, setting to 1");
-        ap_daemons_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_threads_per_child (cmd_parms *cmd, void *dummy,
-                                          const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_threads_per_child = atoi(arg);
-    if (ap_threads_per_child > thread_limit) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: ThreadsPerChild of %d exceeds ThreadLimit "
-                     "value of %d", ap_threads_per_child,
-                     thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "threads, lowering ThreadsPerChild to %d. To increase, please"
-                     " see the", thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     " ThreadLimit directive.");
-        ap_threads_per_child = thread_limit;
-    }
-    else if (ap_threads_per_child < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadsPerChild > 0, setting to 1");
-        ap_threads_per_child = 1;
-    }
-    return NULL;
-}
-
-static const char *set_server_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_server_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_server_limit = atoi(arg);
-    /* you cannot change ServerLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_server_limit &&
-        tmp_server_limit != server_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    server_limit = tmp_server_limit;
-    
-    if (server_limit > MAX_SERVER_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ServerLimit of %d exceeds compile time limit "
-                    "of %d servers,", server_limit, MAX_SERVER_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ServerLimit to %d.", MAX_SERVER_LIMIT);
-       server_limit = MAX_SERVER_LIMIT;
-    } 
-    else if (server_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ServerLimit > 0, setting to 1");
-	server_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_thread_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_thread_limit = atoi(arg);
-    /* you cannot change ThreadLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_thread_limit &&
-        tmp_thread_limit != thread_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    thread_limit = tmp_thread_limit;
-    
-    if (thread_limit > MAX_THREAD_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ThreadLimit of %d exceeds compile time limit "
-                    "of %d servers,", thread_limit, MAX_THREAD_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ThreadLimit to %d.", MAX_THREAD_LIMIT);
-       thread_limit = MAX_THREAD_LIMIT;
-    } 
-    else if (thread_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadLimit > 0, setting to 1");
-	thread_limit = 1;
-    }
-    return NULL;
-}
-
-static const command_rec leader_cmds[] = {
-UNIX_DAEMON_COMMANDS,
-LISTEN_COMMANDS,
-AP_INIT_TAKE1("StartServers", set_daemons_to_start, NULL, RSRC_CONF,
-  "Number of child processes launched at server startup"),
-AP_INIT_TAKE1("MinSpareThreads", set_min_spare_threads, NULL, RSRC_CONF,
-  "Minimum number of idle children, to handle request spikes"),
-AP_INIT_TAKE1("MaxSpareThreads", set_max_spare_threads, NULL, RSRC_CONF,
-  "Maximum number of idle children"),
-AP_INIT_TAKE1("MaxClients", set_max_clients, NULL, RSRC_CONF,
-  "Maximum number of children alive at the same time"),
-AP_INIT_TAKE1("ThreadsPerChild", set_threads_per_child, NULL, RSRC_CONF,
-  "Number of threads each child creates"),
-AP_INIT_TAKE1("ServerLimit", set_server_limit, NULL, RSRC_CONF,
-  "Maximum value of MaxClients for this run of Apache"),
-AP_INIT_TAKE1("ThreadLimit", set_thread_limit, NULL, RSRC_CONF,
-  "Maximum worker threads in a server for this run of Apache"),
-{ NULL }
-};
-
-module AP_MODULE_DECLARE_DATA mpm_leader_module = {
-    MPM20_MODULE_STUFF,
-    ap_mpm_rewrite_args,        /* hook to run before apache parses args */
-    NULL,                       /* create per-directory config structure */
-    NULL,                       /* merge per-directory config structures */
-    NULL,                       /* create per-server config structure */
-    NULL,                       /* merge per-server config structures */
-    leader_cmds,                /* command apr_table_t */
-    leader_hooks                /* register_hooks */
-};
-
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm.h
deleted file mode 100644
index 1db1d1d0..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "scoreboard.h"
-#include "unixd.h"
-
-#ifndef APACHE_MPM_LEADER_H
-#define APACHE_MPM_LEADER_H
-
-#define LEADER_MPM
-
-#define MPM_NAME "Leader-Follower"
-
-#define AP_MPM_WANT_RECLAIM_CHILD_PROCESSES
-#define AP_MPM_WANT_WAIT_OR_TIMEOUT
-#define AP_MPM_WANT_PROCESS_CHILD_STATUS
-#define AP_MPM_WANT_SET_PIDFILE
-#define AP_MPM_WANT_SET_SCOREBOARD
-#define AP_MPM_WANT_SET_LOCKFILE
-#define AP_MPM_WANT_SET_MAX_REQUESTS
-#define AP_MPM_WANT_SET_COREDUMPDIR
-#define AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-#define AP_MPM_WANT_SIGNAL_SERVER
-#define AP_MPM_WANT_SET_MAX_MEM_FREE
-#define AP_MPM_WANT_FATAL_SIGNAL_HANDLER
-#define AP_MPM_DISABLE_NAGLE_ACCEPTED_SOCK
-
-#define AP_MPM_USES_POD 1
-#define MPM_CHILD_PID(i) (ap_scoreboard_image->parent[i].pid)
-#define MPM_NOTE_CHILD_KILLED(i) (MPM_CHILD_PID(i) = 0)
-#define MPM_ACCEPT_FUNC unixd_accept
-
-extern int ap_threads_per_child;
-extern int ap_max_daemons_limit;
-extern server_rec *ap_server_conf;
-extern char ap_coredump_dir[MAX_STRING_LEN];
-
-#endif /* APACHE_MPM_LEADER_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm_default.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm_default.h
deleted file mode 100644
index d5a33989..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/leader/mpm_default.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef APACHE_MPM_DEFAULT_H
-#define APACHE_MPM_DEFAULT_H
-
-/* Number of servers to spawn off by default --- also, if fewer than
- * this free when the caretaker checks, it will spawn more.
- */
-#ifndef DEFAULT_START_DAEMON
-#define DEFAULT_START_DAEMON 3
-#endif
-
-/* Maximum number of *free* server processes --- more than this, and
- * they will die off.
- */
-
-#ifndef DEFAULT_MAX_FREE_DAEMON
-#define DEFAULT_MAX_FREE_DAEMON 10
-#endif
-
-/* Minimum --- fewer than this, and more will be created */
-
-#ifndef DEFAULT_MIN_FREE_DAEMON
-#define DEFAULT_MIN_FREE_DAEMON 3
-#endif
-
-#ifndef DEFAULT_THREADS_PER_CHILD
-#define DEFAULT_THREADS_PER_CHILD 25
-#endif
-
-/* File used for accept locking, when we use a file */
-#ifndef DEFAULT_LOCKFILE
-#define DEFAULT_LOCKFILE DEFAULT_REL_RUNTIMEDIR "/accept.lock"
-#endif
-
-/* Where the main/parent process's pid is logged */
-#ifndef DEFAULT_PIDLOG
-#define DEFAULT_PIDLOG DEFAULT_REL_RUNTIMEDIR "/httpd.pid"
-#endif
-
-/*
- * Interval, in microseconds, between scoreboard maintenance.
- */
-#ifndef SCOREBOARD_MAINTENANCE_INTERVAL
-#define SCOREBOARD_MAINTENANCE_INTERVAL 1000000
-#endif
-
-/* Number of requests to try to handle in a single process.  If <= 0,
- * the children don't die off.
- */
-#ifndef DEFAULT_MAX_REQUESTS_PER_CHILD
-#define DEFAULT_MAX_REQUESTS_PER_CHILD 10000
-#endif
-
-#endif /* AP_MPM_DEFAULT_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/Makefile.in b/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/Makefile.in
deleted file mode 100644
index 374f1306..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/Makefile.in
+++ /dev/null
@@ -1,5 +0,0 @@
-
-LTLIBRARY_NAME    = libperchild.la
-LTLIBRARY_SOURCES = perchild.c
-
-include $(top_srcdir)/build/ltlib.mk
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/config5.m4 b/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/config5.m4
deleted file mode 100644
index 368052f5..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/config5.m4
+++ /dev/null
@@ -1,6 +0,0 @@
-dnl ## XXX - Need a more thorough check of the proper flags to use
-
-if test "$MPM_NAME" = "perchild" ; then
-    AC_CHECK_FUNCS(pthread_kill) 
-    APACHE_FAST_OUTPUT(server/mpm/$MPM_SUBDIR_NAME/Makefile)
-fi
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm.h
deleted file mode 100644
index 84e808db..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "httpd.h"
-#include "mpm_default.h"
-#include "unixd.h"
-
-#ifndef APACHE_MPM_PERCHILD_H
-#define APACHE_MPM_PERCHILD_H
-
-#define PERCHILD_MPM
-
-#define MPM_NAME "Perchild"
-
-#define AP_MPM_WANT_RECLAIM_CHILD_PROCESSES
-#define AP_MPM_WANT_WAIT_OR_TIMEOUT
-#define AP_MPM_WANT_PROCESS_CHILD_STATUS
-#define AP_MPM_WANT_SET_PIDFILE
-#define AP_MPM_WANT_SET_SCOREBOARD
-#define AP_MPM_WANT_SET_LOCKFILE
-#define AP_MPM_WANT_SET_MAX_REQUESTS
-#define AP_MPM_WANT_SET_COREDUMPDIR
-#define AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-#define AP_MPM_WANT_SIGNAL_SERVER
-#define AP_MPM_WANT_FATAL_SIGNAL_HANDLER
-#define AP_MPM_USES_POD
-
-#define MPM_CHILD_PID(i) (ap_scoreboard_image->parent[i].pid)
-#define MPM_NOTE_CHILD_KILLED(i) (MPM_CHILD_PID(i) = 0)
-#define MPM_ACCEPT_FUNC unixd_accept
-
-/* Table of child status */
-#define SERVER_DEAD 0
-#define SERVER_DYING 1
-#define SERVER_ALIVE 2
-
-typedef struct ap_ctable{
-    pid_t pid;
-    unsigned char status;
-} ap_ctable;
-
-extern int ap_threads_per_child;
-extern int ap_max_daemons_limit;
-extern server_rec *ap_server_conf;
-
-#endif /* APACHE_MPM_PERCHILD_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm_default.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm_default.h
deleted file mode 100644
index ece876b5..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/mpm_default.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef APACHE_MPM_DEFAULT_H
-#define APACHE_MPM_DEFAULT_H
-
-/* Number of threads to spawn off by default --- also, if fewer than
- * this free when the caretaker checks, it will spawn more.
- */
-#ifndef DEFAULT_START_THREAD
-#define DEFAULT_START_THREAD 5
-#endif
-
-/* Maximum number of *free* server threads --- more than this, and
- * they will die off.
- */
-
-#ifndef DEFAULT_MAX_SPARE_THREAD
-#define DEFAULT_MAX_SPARE_THREAD 10
-#endif
-
-/* Minimum --- fewer than this, and more will be created */
-
-#ifndef DEFAULT_MIN_SPARE_THREAD
-#define DEFAULT_MIN_SPARE_THREAD 5
-#endif
-
-/* Number of servers to spawn off by default
- */
-#ifndef DEFAULT_NUM_DAEMON
-#define DEFAULT_NUM_DAEMON 2
-#endif
-
-/* File used for accept locking, when we use a file */
-#ifndef DEFAULT_LOCKFILE
-#define DEFAULT_LOCKFILE DEFAULT_REL_RUNTIMEDIR "/accept.lock"
-#endif
-
-/* Where the main/parent process's pid is logged */
-#ifndef DEFAULT_PIDLOG
-#define DEFAULT_PIDLOG DEFAULT_REL_RUNTIMEDIR "/httpd.pid"
-#endif
-
-/*
- * Interval, in microseconds, between scoreboard maintenance.
- */
-#ifndef SCOREBOARD_MAINTENANCE_INTERVAL
-#define SCOREBOARD_MAINTENANCE_INTERVAL 1000000
-#endif
-
-/* Number of requests to try to handle in a single process.  If <= 0,
- * the children don't die off.
- */
-#ifndef DEFAULT_MAX_REQUESTS_PER_CHILD
-#define DEFAULT_MAX_REQUESTS_PER_CHILD 10000
-#endif
-
-#endif /* AP_MPM_DEFAULT_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/perchild.c b/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/perchild.c
deleted file mode 100644
index 8b205beb..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/perchild/perchild.c
+++ /dev/null
@@ -1,2045 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "apr_hash.h"
-#include "apr_strings.h"
-#include "apr_pools.h"
-#include "apr_portable.h"
-#include "apr_file_io.h"
-#include "apr_signal.h"
-
-#define APR_WANT_IOVEC
-#include "apr_want.h"
-
-#if APR_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#if APR_HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-
-#if !APR_HAS_THREADS
-#error The perchild MPM requires APR threads, but they are unavailable.
-#endif  
-
-#define CORE_PRIVATE 
- 
-#include "ap_config.h"
-#include "httpd.h" 
-#include "http_main.h" 
-#include "http_log.h" 
-#include "http_config.h"    /* for read_config */ 
-#include "http_core.h"      /* for get_remote_host */ 
-#include "http_protocol.h"
-#include "http_connection.h"
-#include "ap_mpm.h"
-#include "unixd.h"
-#include "mpm_common.h"
-#include "ap_listen.h"
-#include "mpm_default.h"
-#include "mpm.h"
-#include "scoreboard.h"
-#include "util_filter.h"
-#include "apr_poll.h"
-
-#ifdef HAVE_POLL_H
-#include <poll.h>
-#endif
-#ifdef HAVE_SYS_POLL_H
-#include <sys/poll.h>
-#endif
-
-/* ### should be APR-ized */
-#include <grp.h>
-#include <pwd.h>
-#include <sys/stat.h>
-#include <sys/un.h>
-#include <setjmp.h>
-#ifdef HAVE_SYS_PROCESSOR_H
-#include <sys/processor.h> /* for bindprocessor() */
-#endif
-
-/*
- * Define some magic numbers that we use for the state of the incomming
- * request. These must be < 0 so they don't collide with a file descriptor.
- */
-#define AP_PERCHILD_THISCHILD -1
-#define AP_PERCHILD_OTHERCHILD -2
-
-/* Limit on the threads per process.  Clients will be locked out if more than
- * this * server_limit are needed.
- *
- * We keep this for one reason it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_THREAD_LIMIT
-#define DEFAULT_THREAD_LIMIT 64 
-#endif
-
-/* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_THREAD_LIMIT
-#define MAX_THREAD_LIMIT 20000
-#endif 
-
-/* Limit on the total --- clients will be locked out if more servers than
- * this are needed.  It is intended solely to keep the server from crashing
- * when things get out of hand.
- *
- * We keep a hard maximum number of servers, for two reasons --- first off,
- * in case something goes seriously wrong, we want to stop the fork bomb
- * short of actually crashing the machine we're running on by filling some
- * kernel table.  Secondly, it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_SERVER_LIMIT
-#define DEFAULT_SERVER_LIMIT 8 
-#endif
-
-/* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_SERVER_LIMIT
-#define MAX_SERVER_LIMIT 20000
-#endif
-
-/*
- * Actual definitions of config globals
- */
-
-static int threads_to_start = 0;         /* Worker threads per child */
-static int min_spare_threads = 0;
-static int max_spare_threads = 0;
-static int max_threads = 0;
-static int server_limit = DEFAULT_SERVER_LIMIT;
-static int first_server_limit;
-static int thread_limit = DEFAULT_THREAD_LIMIT;
-static int first_thread_limit;
-static int changed_limit_at_restart;
-static int num_daemons = 0;
-static int curr_child_num = 0;
-static int workers_may_exit = 0;
-static int requests_this_child;
-static int num_listensocks = 0;
-static ap_pod_t *pod;
-static jmp_buf jmpbuffer;
-
-struct child_info_t {
-    uid_t uid;
-    gid_t gid;
-    int input;       /* The socket descriptor */
-    int output;      /* The socket descriptor */
-};
-
-typedef struct {
-    const char *sockname;       /* The base name for the socket */
-    const char *fullsockname;   /* socket base name + extension */
-    int        input;           /* The socket descriptor */
-    int        output;          /* The socket descriptor */
-} perchild_server_conf;
-
-typedef struct child_info_t child_info_t;
-
-/* Tables used to determine the user and group each child process should
- * run as.  The hash table is used to correlate a server name with a child
- * process.
- */
-static child_info_t *child_info_table;
-static int          *thread_socket_table;
-struct ap_ctable    *ap_child_table;
-
-/*
- * The max child slot ever assigned, preserved across restarts.  Necessary
- * to deal with NumServers changes across AP_SIG_GRACEFUL restarts.  We 
- * use this value to optimize routines that have to scan the entire child 
- * table.
- *
- * XXX - It might not be worth keeping this code in. There aren't very
- * many child processes in this MPM.
- */
-int ap_max_daemons_limit = -1;
-int ap_threads_per_child; /* XXX not part of API!  axe it! */
-
-module AP_MODULE_DECLARE_DATA mpm_perchild_module;
-
-static apr_file_t *pipe_of_death_in = NULL;
-static apr_file_t *pipe_of_death_out = NULL;
-static apr_thread_mutex_t *pipe_of_death_mutex;
-
-/* *Non*-shared http_main globals... */
-
-server_rec *ap_server_conf;
-
-/* one_process --- debugging mode variable; can be set from the command line
- * with the -X flag.  If set, this gets you the child_main loop running
- * in the process which originally started up (no detach, no make_child),
- * which is a pretty nice debugging environment.  (You'll get a SIGHUP
- * early in standalone_main; just continue through.  This is the server
- * trying to kill off any child processes which it might have lying
- * around --- Apache doesn't keep track of their pids, it just sends
- * SIGHUP to the process group, ignoring it in the root process.
- * Continue through and you'll be fine.).
- */
-
-static int one_process = 0;
-
-#ifdef DEBUG_SIGSTOP
-int raise_sigstop_flags;
-#endif
-
-static apr_pool_t *pconf;              /* Pool for config stuff */
-static apr_pool_t *pchild;             /* Pool for httpd child stuff */
-static apr_pool_t *thread_pool_parent; /* Parent of per-thread pools */
-static apr_thread_mutex_t *thread_pool_parent_mutex;
-
-static int child_num;
-static unsigned int my_pid; /* Linux getpid() doesn't work except in 
-                      main thread. Use this instead */
-/* Keep track of the number of worker threads currently active */
-static int worker_thread_count;
-static apr_thread_mutex_t *worker_thread_count_mutex;
-static int *worker_thread_free_ids;
-static apr_threadattr_t *worker_thread_attr;
-
-/* Keep track of the number of idle worker threads */
-static int idle_thread_count;
-static apr_thread_mutex_t *idle_thread_count_mutex;
-
-/* Locks for accept serialization */
-#ifdef NO_SERIALIZED_ACCEPT
-#define SAFE_ACCEPT(stmt) APR_SUCCESS
-#else
-#define SAFE_ACCEPT(stmt) (stmt)
-static apr_proc_mutex_t *process_accept_mutex;
-#endif /* NO_SERIALIZED_ACCEPT */
-static apr_thread_mutex_t *thread_accept_mutex;
-
-AP_DECLARE(apr_status_t) ap_mpm_query(int query_code, int *result)
-{
-    switch(query_code){
-        case AP_MPMQ_MAX_DAEMON_USED:
-            *result = ap_max_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_THREADED:
-            *result = AP_MPMQ_DYNAMIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_FORKED:
-            *result = AP_MPMQ_STATIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_DAEMONS:
-            *result = server_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_THREADS:
-            *result = thread_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_THREADS:
-            *result = max_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_THREADS:    
-            *result = min_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_THREADS:
-            *result = max_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_REQUESTS_DAEMON:
-            *result = ap_max_requests_per_child;
-            return APR_SUCCESS; 
-        case AP_MPMQ_MAX_DAEMONS:
-            *result = num_daemons;
-            return APR_SUCCESS;
-    }
-    return APR_ENOTIMPL;
-}
-
-/* a clean exit from a child with proper cleanup */
-static void clean_child_exit(int code)
-{
-    if (pchild) {
-        apr_pool_destroy(pchild);
-    }
-    exit(code);
-}
-
-static void just_die(int sig)
-{
-    clean_child_exit(0);
-}
-
-/*****************************************************************
- * Connection structures and accounting...
- */
-
-/* volatile just in case */
-static int volatile shutdown_pending;
-static int volatile restart_pending;
-static int volatile is_graceful;
-static int volatile child_fatal;
-/* we don't currently track ap_my_generation, but mod_status 
- * references it so it must be defined */
-ap_generation_t volatile ap_my_generation=0;
-
-/*
- * ap_start_shutdown() and ap_start_restart(), below, are a first stab at
- * functions to initiate shutdown or restart without relying on signals. 
- * Previously this was initiated in sig_term() and restart() signal handlers, 
- * but we want to be able to start a shutdown/restart from other sources --
- * e.g. on Win32, from the service manager. Now the service manager can
- * call ap_start_shutdown() or ap_start_restart() as appropiate.  Note that
- * these functions can also be called by the child processes, since global
- * variables are no longer used to pass on the required action to the parent.
- *
- * These should only be called from the parent process itself, since the
- * parent process will use the shutdown_pending and restart_pending variables
- * to determine whether to shutdown or restart. The child process should
- * call signal_parent() directly to tell the parent to die -- this will
- * cause neither of those variable to be set, which the parent will
- * assume means something serious is wrong (which it will be, for the
- * child to force an exit) and so do an exit anyway.
- */
-
-static void ap_start_shutdown(void)
-{
-    if (shutdown_pending == 1) {
-        /* Um, is this _probably_ not an error, if the user has
-         * tried to do a shutdown twice quickly, so we won't
-         * worry about reporting it.
-         */
-        return;
-    }
-    shutdown_pending = 1;
-}
-
-/* do a graceful restart if graceful == 1 */
-static void ap_start_restart(int graceful)
-{
-
-    if (restart_pending == 1) {
-        /* Probably not an error - don't bother reporting it */
-        return;
-    }
-    restart_pending = 1;
-    is_graceful = graceful;
-}
-
-static void sig_term(int sig)
-{
-    ap_start_shutdown();
-}
-
-static void restart(int sig)
-{
-#ifndef WIN32
-    ap_start_restart(sig == AP_SIG_GRACEFUL);
-#else
-    ap_start_restart(1);
-#endif
-}
-
-static void set_signals(void)
-{
-#ifndef NO_USE_SIGACTION
-    struct sigaction sa;
-#endif
-
-    if (!one_process) {
-        ap_fatal_signal_setup(ap_server_conf, pconf);
-    }
-
-#ifndef NO_USE_SIGACTION
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = 0;
-
-    sa.sa_handler = sig_term;
-    if (sigaction(SIGTERM, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGTERM)");
-#ifdef SIGINT
-    if (sigaction(SIGINT, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGINT)");
-#endif
-#ifdef SIGXCPU
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXCPU, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGXCPU)");
-#endif
-#ifdef SIGXFSZ
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXFSZ, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGXFSZ)");
-#endif
-#ifdef SIGPIPE
-    sa.sa_handler = SIG_IGN;
-    if (sigaction(SIGPIPE, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGPIPE)");
-#endif
-
-    /* we want to ignore HUPs and AP_SIG_GRACEFUL while we're busy 
-     * processing one */
-    sigaddset(&sa.sa_mask, SIGHUP);
-    sigaddset(&sa.sa_mask, AP_SIG_GRACEFUL);
-    sa.sa_handler = restart;
-    if (sigaction(SIGHUP, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(SIGHUP)");
-    if (sigaction(AP_SIG_GRACEFUL, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                     "sigaction(" AP_SIG_GRACEFUL_STRING ")");
-#else
-    if (!one_process) {
-#ifdef SIGXCPU
-        apr_signal(SIGXCPU, SIG_DFL);
-#endif /* SIGXCPU */
-#ifdef SIGXFSZ
-        apr_signal(SIGXFSZ, SIG_DFL);
-#endif /* SIGXFSZ */
-    }
-
-    apr_signal(SIGTERM, sig_term);
-#ifdef SIGHUP
-    apr_signal(SIGHUP, restart);
-#endif /* SIGHUP */
-#ifdef AP_SIG_GRACEFUL
-    apr_signal(AP_SIG_GRACEFUL, restart);
-#endif /* AP_SIG_GRACEFUL */
-#ifdef SIGPIPE
-    apr_signal(SIGPIPE, SIG_IGN);
-#endif /* SIGPIPE */
-
-#endif
-}
-
-/*****************************************************************
- * Here follows a long bunch of generic server bookkeeping stuff...
- */
-
-int ap_graceful_stop_signalled(void)
-{
-    /* XXX - Does this really work? - Manoj */
-    return is_graceful;
-}
-
-/*****************************************************************
- * Child process main loop.
- */
-
-static void process_socket(apr_pool_t *p, apr_socket_t *sock, long conn_id,
-                           apr_bucket_alloc_t *bucket_alloc)
-{
-    conn_rec *current_conn;
-    int csd;
-    apr_status_t rv;
-    int thread_num = conn_id % thread_limit;
-    ap_sb_handle_t *sbh;
-
-    if ((rv = apr_os_sock_get(&csd, sock)) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, rv, NULL, "apr_os_sock_get");
-    }
-
-    if (thread_socket_table[thread_num] < 0) {
-        ap_sock_disable_nagle(sock);
-    }
-
-    ap_create_sb_handle(&sbh, p, conn_id / thread_limit, thread_num);
-    current_conn = ap_run_create_connection(p, ap_server_conf, sock, conn_id, 
-                                            sbh, bucket_alloc);
-    if (current_conn) {
-        ap_process_connection(current_conn, sock);
-        ap_lingering_close(current_conn);
-    }
-}
-
-static int perchild_process_connection(conn_rec *c)
-{
-    ap_filter_t *f;
-    apr_bucket_brigade *bb;
-    core_net_rec *net;
-
-    apr_pool_userdata_get((void **)&bb, "PERCHILD_SOCKETS", c->pool);
-    if (bb != NULL) {
-        for (f = c->output_filters; f != NULL; f = f->next) {
-            if (!strcmp(f->frec->name, "core")) {
-                break;
-            }
-        }
-        if (f != NULL) {
-            net = f->ctx;
-            net->in_ctx = apr_palloc(c->pool, sizeof(*net->in_ctx));
-            net->in_ctx->b = bb;
-        }
-    }
-    return DECLINED;
-}
-    
-
-static void *worker_thread(apr_thread_t *, void *);
-
-/* Starts a thread as long as we're below max_threads */
-static int start_thread(void)
-{
-    apr_thread_t *thread;
-    int rc;
-
-    apr_thread_mutex_lock(worker_thread_count_mutex);
-    if (worker_thread_count < max_threads - 1) {
-        rc = apr_thread_create(&thread, worker_thread_attr, worker_thread,
-                 &worker_thread_free_ids[worker_thread_count], pchild);
-        if (rc != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_ALERT, rc, ap_server_conf,
-                         "apr_thread_create: unable to create worker thread");
-            /* In case system resources are maxxed out, we don't want
-               Apache running away with the CPU trying to fork over and
-               over and over again if we exit. */
-            sleep(10);
-            workers_may_exit = 1;
-            apr_thread_mutex_unlock(worker_thread_count_mutex);
-            return 0;
-        }
-        else {
-            worker_thread_count++;
-        }
-    }
-    else {
-        static int reported = 0;
-        
-        if (!reported) {
-            ap_log_error(APLOG_MARK, APLOG_ERR, 0,
-                         ap_server_conf,
-                         "server reached MaxThreadsPerChild setting, "
-                         "consider raising the MaxThreadsPerChild or "
-                         "NumServers settings");
-            reported = 1;
-        }
-        apr_thread_mutex_unlock(worker_thread_count_mutex);
-        return 0;
-    }
-    apr_thread_mutex_unlock(worker_thread_count_mutex);
-    return 1;
-
-}
-
-/* Sets workers_may_exit if we received a character on the pipe_of_death */
-static apr_status_t check_pipe_of_death(void **csd, ap_listen_rec *lr,
-                                        apr_pool_t *ptrans)
-{
-    apr_thread_mutex_lock(pipe_of_death_mutex);
-    if (!workers_may_exit) {
-        int ret;
-        char pipe_read_char;
-        apr_size_t n = 1;
-
-        ret = apr_recv(lr->sd, &pipe_read_char, &n);
-        if (APR_STATUS_IS_EAGAIN(ret)) {
-            /* It lost the lottery. It must continue to suffer
-             * through a life of servitude. */
-        }
-        else {
-            /* It won the lottery (or something else is very
-             * wrong). Embrace death with open arms. */
-            workers_may_exit = 1;
-        }
-    }
-    apr_thread_mutex_unlock(pipe_of_death_mutex);
-    return APR_SUCCESS;
-}
-
-static apr_status_t receive_from_other_child(void **csd, ap_listen_rec *lr,
-                                             apr_pool_t *ptrans)
-{
-    struct msghdr msg;
-    struct cmsghdr *cmsg;
-    char buffer[HUGE_STRING_LEN * 2], *headers, *body;
-    int headerslen, bodylen;
-    struct iovec iov;
-    int ret, dp;
-    apr_os_sock_t sd;
-    apr_bucket_alloc_t *alloc = apr_bucket_alloc_create(ptrans);
-    apr_bucket_brigade *bb = apr_brigade_create(ptrans, alloc);
-    apr_bucket *bucket;
-
-    apr_os_sock_get(&sd, lr->sd);
-
-    iov.iov_base = buffer;
-    iov.iov_len = sizeof(buffer);
-
-    msg.msg_name = NULL;
-    msg.msg_namelen = 0;
-    msg.msg_iov = &iov;
-    msg.msg_iovlen = 1;
-
-    cmsg = apr_palloc(ptrans, sizeof(*cmsg) + sizeof(sd));
-    cmsg->cmsg_len = sizeof(*cmsg) + sizeof(sd);
-    msg.msg_control = cmsg;
-    msg.msg_controllen = cmsg->cmsg_len;
-
-    ret = recvmsg(sd, &msg, 0);
-
-    memcpy(&dp, CMSG_DATA(cmsg), sizeof(dp));
-
-    *csd = NULL; /* tell apr_os_sock_put() to allocate new apr_socket_t */
-    apr_os_sock_put((apr_socket_t **)csd, &dp, ptrans);
-
-    bucket = apr_bucket_eos_create(alloc);
-    APR_BRIGADE_INSERT_HEAD(bb, bucket);
-    bucket = apr_bucket_socket_create(*csd, alloc);
-    APR_BRIGADE_INSERT_HEAD(bb, bucket);
-
-    body = strchr(iov.iov_base, 0);
-    if (!body) {
-        return 1;
-    }
-
-    body++;
-    bodylen = strlen(body);
-
-    headers = iov.iov_base;
-    headerslen = body - headers;
-
-    bucket = apr_bucket_heap_create(body, bodylen, NULL, alloc);
-    APR_BRIGADE_INSERT_HEAD(bb, bucket);
-    bucket = apr_bucket_heap_create(headers, headerslen, NULL, alloc);
-    APR_BRIGADE_INSERT_HEAD(bb, bucket);
-
-    apr_pool_userdata_set(bb, "PERCHILD_SOCKETS", NULL, ptrans);
-
-    return 0;
-}
-
-/* idle_thread_count should be incremented before starting a worker_thread */
-
-static void *worker_thread(apr_thread_t *thd, void *arg)
-{
-    void *csd;
-    apr_pool_t *tpool;      /* Pool for this thread           */
-    apr_pool_t *ptrans;     /* Pool for per-transaction stuff */
-    volatile int thread_just_started = 1;
-    int srv;
-    int thread_num = *((int *) arg);
-    long conn_id = child_num * thread_limit + thread_num;
-    apr_pollfd_t *pollset;
-    apr_status_t rv;
-    ap_listen_rec *lr, *last_lr = ap_listeners;
-    int n;
-    apr_bucket_alloc_t *bucket_alloc;
-
-    apr_thread_mutex_lock(thread_pool_parent_mutex);
-    apr_pool_create(&tpool, thread_pool_parent);
-    apr_thread_mutex_unlock(thread_pool_parent_mutex);
-    apr_pool_create(&ptrans, tpool);
-
-    (void) ap_update_child_status_from_indexes(child_num, thread_num, 
-                                               SERVER_STARTING,
-                                               (request_rec *) NULL);
-
-    bucket_alloc = apr_bucket_alloc_create(apr_thread_pool_get(thd));
-
-    apr_poll_setup(&pollset, num_listensocks, tpool);
-    for(lr = ap_listeners; lr != NULL; lr = lr->next) {
-        int fd;
-        apr_poll_socket_add(pollset, lr->sd, APR_POLLIN);
-
-        apr_os_sock_get(&fd, lr->sd);
-    }
-
-    while (!workers_may_exit) {
-        workers_may_exit |= ((ap_max_requests_per_child != 0)
-                            && (requests_this_child <= 0));
-        if (workers_may_exit) break;
-        if (!thread_just_started) {
-            apr_thread_mutex_lock(idle_thread_count_mutex);
-            if (idle_thread_count < max_spare_threads) {
-                idle_thread_count++;
-                apr_thread_mutex_unlock(idle_thread_count_mutex);
-            }
-            else {
-                apr_thread_mutex_unlock(idle_thread_count_mutex);
-                break;
-            }
-        }
-        else {
-            thread_just_started = 0;
-        }
-
-        (void) ap_update_child_status_from_indexes(child_num, thread_num, 
-                                                   SERVER_READY,
-                                                   (request_rec *) NULL);
-
-        apr_thread_mutex_lock(thread_accept_mutex);
-        if (workers_may_exit) {
-            apr_thread_mutex_unlock(thread_accept_mutex);
-            break;
-        }
-        if ((rv = SAFE_ACCEPT(apr_proc_mutex_lock(process_accept_mutex)))
-            != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                         "apr_proc_mutex_lock failed. Attempting to shutdown "
-                         "process gracefully.");
-            workers_may_exit = 1;
-        }
-
-        while (!workers_may_exit) {
-            apr_int16_t event;
-            srv = apr_poll(pollset, num_listensocks, &n, -1);
-
-            if (srv != APR_SUCCESS) {
-                if (APR_STATUS_IS_EINTR(srv)) {
-                    continue;
-                }
-
-                /* apr_poll() will only return errors in catastrophic
-                 * circumstances. Let's try exiting gracefully, for now. */
-                ap_log_error(APLOG_MARK, APLOG_ERR, srv, (const server_rec *)
-                             ap_server_conf, "apr_poll: (listen)");
-                workers_may_exit = 1;
-            }
-            if (workers_may_exit) break;
-
-            /* find a listener */
-            lr = last_lr;
-            do {
-                lr = lr->next;
-                if (lr == NULL) {
-                    lr = ap_listeners;
-                }
-                /* XXX: Should we check for POLLERR? */
-                apr_poll_revents_get(&event, lr->sd, pollset);
-                if (event & (APR_POLLIN)) {
-                    last_lr = lr;
-                    goto got_fd;
-                }
-            } while (lr != last_lr);
-        }
-    got_fd:
-        if (!workers_may_exit) {
-            rv = lr->accept_func(&csd, lr, ptrans);
-            if (rv == APR_EGENERAL) {
-                /* E[NM]FILE, ENOMEM, etc */
-                workers_may_exit = 1;
-            }
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(process_accept_mutex)))
-                != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to shutdown "
-                             "process gracefully.");
-                workers_may_exit = 1;
-            }
-            apr_thread_mutex_unlock(thread_accept_mutex);
-            apr_thread_mutex_lock(idle_thread_count_mutex);
-            if (idle_thread_count > min_spare_threads) {
-                idle_thread_count--;
-            }
-            else {
-                if (!start_thread()) {
-                    idle_thread_count--;
-                }
-            }
-            apr_thread_mutex_unlock(idle_thread_count_mutex);
-            if (setjmp(jmpbuffer) != 1) {
-                process_socket(ptrans, csd, conn_id, bucket_alloc);
-            }
-            else {
-                thread_socket_table[thread_num] = AP_PERCHILD_THISCHILD;
-            }  
-            requests_this_child--;
-        }
-        else {
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(process_accept_mutex)))
-                != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to shutdown "
-                             "process gracefully.");
-                workers_may_exit = 1;
-            }
-            apr_thread_mutex_unlock(thread_accept_mutex);
-            apr_thread_mutex_lock(idle_thread_count_mutex);
-            idle_thread_count--;
-            apr_thread_mutex_unlock(idle_thread_count_mutex);
-        break;
-        }
-        apr_pool_clear(ptrans);
-    }
-
-    apr_thread_mutex_lock(thread_pool_parent_mutex);
-    ap_update_child_status_from_indexes(child_num, thread_num, SERVER_DEAD,
-                                        (request_rec *) NULL);
-    apr_pool_destroy(tpool);
-    apr_thread_mutex_unlock(thread_pool_parent_mutex);
-    apr_thread_mutex_lock(worker_thread_count_mutex);
-    worker_thread_count--;
-    worker_thread_free_ids[worker_thread_count] = thread_num;
-    if (worker_thread_count == 0) {
-        /* All the threads have exited, now finish the shutdown process
-         * by signalling the sigwait thread */
-        kill(my_pid, SIGTERM);
-    }
-    apr_thread_mutex_unlock(worker_thread_count_mutex);
-
-    apr_bucket_alloc_destroy(bucket_alloc);
-
-    return NULL;
-}
-
-
-
-/* Set group privileges.
- *
- * Note that we use the username as set in the config files, rather than
- * the lookup of to uid --- the same uid may have multiple passwd entries,
- * with different sets of groups for each.
- */
-
-static int set_group_privs(uid_t uid, gid_t gid)
-{
-    if (!geteuid()) {
-        const char *name;
-
-        /* Get username if passed as a uid */
-
-        struct passwd *ent;
-
-        if ((ent = getpwuid(uid)) == NULL) {
-            ap_log_error(APLOG_MARK, APLOG_ALERT, errno, NULL,
-                         "getpwuid: couldn't determine user name from uid %u, "
-                         "you probably need to modify the User directive",
-                         (unsigned)uid);
-            return -1;
-        }
-
-        name = ent->pw_name;
-
-        /*
-         * Set the GID before initgroups(), since on some platforms
-         * setgid() is known to zap the group list.
-         */
-        if (setgid(gid) == -1) {
-            ap_log_error(APLOG_MARK, APLOG_ALERT, errno, NULL,
-                         "setgid: unable to set group id to Group %u",
-                         (unsigned)gid);
-            return -1;
-        }
-
-        /* Reset `groups' attributes. */
-
-        if (initgroups(name, gid) == -1) {
-            ap_log_error(APLOG_MARK, APLOG_ALERT, errno, NULL,
-                         "initgroups: unable to set groups for User %s "
-                         "and Group %u", name, (unsigned)gid);
-            return -1;
-        }
-    }
-    return 0;
-}
-
-
-static int perchild_setup_child(int childnum)
-{
-    child_info_t *ug = &child_info_table[childnum];
-
-    if (ug->uid == -1 && ug->gid == -1) {
-        return unixd_setup_child();
-    }
-    if (set_group_privs(ug->uid, ug->gid)) {
-        return -1;
-    }
-    /* Only try to switch if we're running as root */
-    if (!geteuid()
-        && (
-#ifdef _OSD_POSIX
-            os_init_job_environment(server_conf, unixd_config.user_name,
-                                    one_process) != 0 ||
-#endif
-            setuid(ug->uid) == -1)) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, errno, NULL,
-                     "setuid: unable to change to uid: %ld",
-                     (long) ug->uid);
-        return -1;
-    }
-    return 0;
-}
-
-static int check_signal(int signum)
-{
-    switch (signum) {
-    case SIGTERM:
-    case SIGINT:
-        just_die(signum);
-        return 1;
-    }
-    return 0;
-}                                                                               
-
-typedef struct perchild_header {
-    char *headers;
-    apr_pool_t *p;
-} perchild_header;
-
-/* Send a single HTTP header field to the client.  Note that this function
- * is used in calls to table_do(), so their interfaces are co-dependent.
- * In other words, don't change this one without checking table_do in alloc.c.
- * It returns true unless there was a write error of some kind.
- */
-static int perchild_header_field(perchild_header *h,
-                             const char *fieldname, const char *fieldval)
-{
-    apr_pstrcat(h->p, h->headers, fieldname, ": ", fieldval, CRLF, NULL); 
-    return 1;
-}
-
-
-static void child_main(int child_num_arg)
-{
-    int i;
-    apr_status_t rv;
-    apr_socket_t *sock = NULL;
-    ap_listen_rec *lr;
-    
-    my_pid = getpid();
-    ap_fatal_signal_child_setup(ap_server_conf);
-    child_num = child_num_arg;
-    apr_pool_create(&pchild, pconf);
-
-    for (lr = ap_listeners ; lr->next != NULL; lr = lr->next) {
-        continue;
-    }
-
-    apr_os_sock_put(&sock, &child_info_table[child_num].input, pconf);
-    lr->next = apr_palloc(pconf, sizeof(*lr));
-    lr->next->sd = sock;
-    lr->next->active = 1;
-    lr->next->accept_func = receive_from_other_child;
-    lr->next->next = NULL;
-    lr = lr->next;
-    num_listensocks++;
-
-    /*stuff to do before we switch id's, so we have permissions.*/
-
-    rv = SAFE_ACCEPT(apr_proc_mutex_child_init(&process_accept_mutex, 
-                                               ap_lock_fname, pchild));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize cross-process lock in child");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (perchild_setup_child(child_num)) {
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ap_run_child_init(pchild, ap_server_conf);
-
-    /*done with init critical section */
-
-    apr_setup_signal_thread();
-
-    requests_this_child = ap_max_requests_per_child;
-    
-
-    /* Setup worker threads */
-
-    if (threads_to_start > max_threads) {
-        threads_to_start = max_threads;
-    }
-    idle_thread_count = threads_to_start;
-    worker_thread_count = 0;
-    worker_thread_free_ids = (int *)apr_pcalloc(pchild, thread_limit * sizeof(int));
-    for (i = 0; i < max_threads; i++) {
-        worker_thread_free_ids[i] = i;
-    }
-    apr_pool_create(&thread_pool_parent, pchild);
-    apr_thread_mutex_create(&thread_pool_parent_mutex, 
-                    APR_THREAD_MUTEX_DEFAULT, pchild);
-    apr_thread_mutex_create(&idle_thread_count_mutex, 
-                    APR_THREAD_MUTEX_DEFAULT, pchild);
-    apr_thread_mutex_create(&worker_thread_count_mutex,
-                    APR_THREAD_MUTEX_DEFAULT, pchild);
-    apr_thread_mutex_create(&pipe_of_death_mutex,
-                    APR_THREAD_MUTEX_DEFAULT, pchild);
-    apr_thread_mutex_create(&thread_accept_mutex,
-                    APR_THREAD_MUTEX_DEFAULT, pchild);
-
-    apr_threadattr_create(&worker_thread_attr, pchild);
-    apr_threadattr_detach_set(worker_thread_attr, 1);                                     
-
-    /* We are creating worker threads right now */
-    for (i=0; i < threads_to_start; i++) {
-        /* start_thread shouldn't fail here */
-        if (!start_thread()) {
-            break;
-        }
-    }
-
-    apr_signal_thread(check_signal);
-}
-
-static int make_child(server_rec *s, int slot)
-{
-    int pid;
-
-    if (slot + 1 > ap_max_daemons_limit) {
-        ap_max_daemons_limit = slot + 1;
-    }
-
-    if (one_process) {
-        set_signals();
-        ap_child_table[slot].pid = getpid();
-        ap_child_table[slot].status = SERVER_ALIVE;
-        child_main(slot);
-    }
-    (void) ap_update_child_status_from_indexes(slot, 0, SERVER_STARTING,
-                                               (request_rec *) NULL);
-
-    if ((pid = fork()) == -1) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, s,
-                     "fork: Unable to fork new process");
-        /* In case system resources are maxxed out, we don't want
-         * Apache running away with the CPU trying to fork over and
-         * over and over again. */
-        sleep(10);
-
-        return -1;
-    }
-
-    if (!pid) {
-#ifdef HAVE_BINDPROCESSOR
-        /* By default, AIX binds to a single processor.  This bit unbinds
-         * children which will then bind to another CPU.
-         */
-        int status = bindprocessor(BINDPROCESS, (int)getpid(),
-                                   PROCESSOR_CLASS_ANY);
-        if (status != OK) {
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, 
-                         ap_server_conf, "processor unbind failed %d", status);
-        }
-#endif
-
-        RAISE_SIGSTOP(MAKE_CHILD);
-
-        /* XXX - For an unthreaded server, a signal handler will be necessary
-         * apr_signal(SIGTERM, just_die);
-         */
-        child_main(slot);
-        clean_child_exit(0);
-    }
-    /* else */
-    ap_child_table[slot].pid = pid;
-    ap_child_table[slot].status = SERVER_ALIVE;
-
-    return 0;
-}
-
-/* start up a bunch of children */
-static int startup_children(int number_to_start)
-{
-    int i;
-
-    for (i = 0; number_to_start && i < num_daemons; ++i) {
-        if (ap_child_table[i].pid) {
-            continue;
-        }
-        if (make_child(ap_server_conf, i) < 0) {
-            break;
-        }
-        --number_to_start;
-    }
-    return number_to_start;
-}
-
-
-/*
- * spawn_rate is the number of children that will be spawned on the
- * next maintenance cycle if there aren't enough servers.  It is
- * doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by
- * without the need to spawn.
- */
-static int spawn_rate = 1;
-#ifndef MAX_SPAWN_RATE
-#define MAX_SPAWN_RATE  (32)
-#endif
-static int hold_off_on_exponential_spawning;
-
-static void perform_child_maintenance(void)
-{
-    int i;
-    int free_length;
-    int free_slots[MAX_SPAWN_RATE];
-    int last_non_dead = -1;
-
-    /* initialize the free_list */
-    free_length = 0;
-    
-    for (i = 0; i < num_daemons; ++i) {
-        if (ap_child_table[i].pid == 0) {
-            if (free_length < spawn_rate) {
-                free_slots[free_length] = i;
-                ++free_length;
-            }
-        }
-        else {
-            last_non_dead = i;
-        }
-
-        if (i >= ap_max_daemons_limit && free_length >= spawn_rate) {
-            break;
-        }
-    }
-    ap_max_daemons_limit = last_non_dead + 1;
-
-    if (free_length > 0) {
-        for (i = 0; i < free_length; ++i) {
-            make_child(ap_server_conf, free_slots[i]);
-        }
-        /* the next time around we want to spawn twice as many if this
-         * wasn't good enough, but not if we've just done a graceful
-         */
-        if (hold_off_on_exponential_spawning) {
-            --hold_off_on_exponential_spawning;
-        }
-        else if (spawn_rate < MAX_SPAWN_RATE) {
-            spawn_rate *= 2;
-        }
-    }
-    else {
-        spawn_rate = 1;
-    }
-}
-
-static void server_main_loop(int remaining_children_to_start)
-{
-    int child_slot;
-    apr_exit_why_e exitwhy;
-    int status;
-    apr_proc_t pid;
-    int i;
-
-    while (!restart_pending && !shutdown_pending) {
-        ap_wait_or_timeout(&exitwhy, &status, &pid, pconf);
-        
-        if (pid.pid != -1) {
-            if (ap_process_child_status(&pid, exitwhy, status)
-                == APEXIT_CHILDFATAL) {
-                shutdown_pending = 1;
-                child_fatal = 1;
-                return;
-            }
-            /* non-fatal death... note that it's gone in the child table and
-             * clean out the status table. */
-            child_slot = -1;
-            for (i = 0; i < ap_max_daemons_limit; ++i) {
-                if (ap_child_table[i].pid == pid.pid) {
-                    child_slot = i;
-                    break;
-                }
-            }
-            if (child_slot >= 0) {
-                ap_child_table[child_slot].pid = 0;
-                ap_update_child_status_from_indexes(child_slot, i, SERVER_DEAD,
-                                                    (request_rec *) NULL);
-
-                
-                if (remaining_children_to_start
-                    && child_slot < num_daemons) {
-                    /* we're still doing a 1-for-1 replacement of dead
-                     * children with new children
-                     */
-                    make_child(ap_server_conf, child_slot);
-                    --remaining_children_to_start;
-                }
-#if APR_HAS_OTHER_CHILD
-            }
-            else if (apr_proc_other_child_read(&pid, status) == 0) {
-            /* handled */
-#endif
-            }
-            else if (is_graceful) {
-                /* Great, we've probably just lost a slot in the
-                * child table.  Somehow we don't know about this
-                * child.
-                */
-                ap_log_error(APLOG_MARK, APLOG_WARNING, 0, 
-                             ap_server_conf,
-                             "long lost child came home! (pid %ld)", 
-                             (long)pid.pid);
-            }
-            /* Don't perform idle maintenance when a child dies,
-             * only do it when there's a timeout.  Remember only a
-             * finite number of children can die, and it's pretty
-             * pathological for a lot to die suddenly.
-             */
-            continue;
-        }
-        else if (remaining_children_to_start) {
-            /* we hit a 1 second timeout in which none of the previous
-             * generation of children needed to be reaped... so assume
-             * they're all done, and pick up the slack if any is left.
-             */
-            remaining_children_to_start = \
-                startup_children(remaining_children_to_start);
-            /* In any event we really shouldn't do the code below because
-             * few of the servers we just started are in the IDLE state
-             * yet, so we'd mistakenly create an extra server.
-             */
-            continue;
-        }
-
-        perform_child_maintenance();
-    }
-}
-
-int ap_mpm_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s)
-{
-    int remaining_children_to_start;
-    int i;
-    apr_status_t rv;
-    apr_size_t one = 1;
-    ap_listen_rec *lr;
-    apr_socket_t *sock = NULL;
-    int fd;
-
-    ap_log_pid(pconf, ap_pid_fname);
-
-    first_server_limit = server_limit;
-    first_thread_limit = thread_limit;
-    if (changed_limit_at_restart) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s,
-                     "WARNING: Attempt to change ServerLimit or ThreadLimit "
-                     "ignored during restart");
-        changed_limit_at_restart = 0;
-    }
-
-    ap_server_conf = s;
-
-    if ((ap_accept_lock_mech == APR_LOCK_SYSVSEM) || 
-        (ap_accept_lock_mech == APR_LOCK_POSIXSEM)) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s,
-                     "Server configured for an accept lock mechanism that "
-                     "cannot be used with perchild.  Falling back to FCNTL.");
-        ap_accept_lock_mech = APR_LOCK_FCNTL;
-    }
-
-    /* Initialize cross-process accept lock */
-    ap_lock_fname = apr_psprintf(_pconf, "%s.%u",
-                                 ap_server_root_relative(_pconf, ap_lock_fname),
-                                 my_pid);
-    rv = SAFE_ACCEPT(apr_proc_mutex_create(&process_accept_mutex,
-                                     ap_lock_fname, ap_accept_lock_mech,
-                                     _pconf));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                     "Couldn't create cross-process lock");
-        return 1;
-    }
-
-    if (!is_graceful) {
-        if (ap_run_pre_mpm(s->process->pool, SB_SHARED) != OK) {
-            return 1;
-        }
-    }
-    /* Initialize the child table */
-    if (!is_graceful) {
-        for (i = 0; i < server_limit; i++) {
-            ap_child_table[i].pid = 0;
-        }
-    }
-
-    /* We need to put the new listeners at the end of the ap_listeners
-     * list.  If we don't, then the pool will be cleared before the
-     * open_logs phase is called for the second time, and ap_listeners
-     * will have only invalid data.  If that happens, then the sockets
-     * that we opened using make_sock() will be lost, and the server
-     * won't start.
-     */
-    for (lr = ap_listeners ; lr->next != NULL; lr = lr->next) {
-        continue;
-    }
-
-    apr_os_file_get(&fd, pipe_of_death_in);
-    apr_os_sock_put(&sock, &fd, pconf);
-    lr->next = apr_palloc(pconf, sizeof(*lr));
-    lr->next->sd = sock;
-    lr->next->active = 1;
-    lr->next->accept_func = check_pipe_of_death;
-    lr->next->next = NULL;
-    lr = lr->next;
-    num_listensocks++;
-
-    set_signals();
-
-    /* If we're doing a graceful_restart then we're going to see a lot
-     * of children exiting immediately when we get into the main loop
-     * below (because we just sent them AP_SIG_GRACEFUL).  This happens 
-     * pretty rapidly... and for each one that exits we'll start a new one 
-     * until we reach at least daemons_min_free.  But we may be permitted to
-     * start more than that, so we'll just keep track of how many we're
-     * supposed to start up without the 1 second penalty between each fork.
-     */
-    remaining_children_to_start = num_daemons;
-    if (!is_graceful) {
-        remaining_children_to_start = \
-            startup_children(remaining_children_to_start);
-    }
-    else {
-        /* give the system some time to recover before kicking into
-         * exponential mode */
-        hold_off_on_exponential_spawning = 10;
-    }
-
-    ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                 "%s configured -- resuming normal operations",
-                 ap_get_server_version());
-    ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf,
-                 "Server built: %s", ap_get_server_built());
-#ifdef AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-		"AcceptMutex: %s (default: %s)",
-		apr_proc_mutex_name(process_accept_mutex),
-		apr_proc_mutex_defname());
-#endif
-    restart_pending = shutdown_pending = 0;
-
-    server_main_loop(remaining_children_to_start);
-
-    if (shutdown_pending) {
-        /* Time to gracefully shut down:
-         * Kill child processes, tell them to call child_exit, etc...
-         */
-        if (unixd_killpg(getpgrp(), SIGTERM) < 0) {
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                         "killpg SIGTERM");
-        }
-        ap_reclaim_child_processes(1);      /* Start with SIGTERM */
-
-        if (!child_fatal) {
-            /* cleanup pid file on normal shutdown */
-            const char *pidfile = NULL;
-            pidfile = ap_server_root_relative (pconf, ap_pid_fname);
-            if (pidfile != NULL && unlink(pidfile) == 0) {
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0,
-                             ap_server_conf,
-                             "removed PID file %s (pid=%ld)",
-                             pidfile, (long)getpid());
-            }
-    
-            ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                         ap_server_conf, "caught SIGTERM, shutting down");
-        }
-        return 1;
-    }
-
-    /* we've been told to restart */
-    apr_signal(SIGHUP, SIG_IGN);
-
-    if (one_process) {
-        /* not worth thinking about */
-        return 1;
-    }
-
-    if (is_graceful) {
-        char char_of_death = '!';
-
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                     ap_server_conf, AP_SIG_GRACEFUL_STRING " received.  "
-                     "Doing graceful restart");
-
-        /* This is mostly for debugging... so that we know what is still
-         * gracefully dealing with existing request.
-         */
-    
-        for (i = 0; i < num_daemons; ++i) {
-            if (ap_child_table[i].pid) {
-                ap_child_table[i].status = SERVER_DYING;
-            } 
-        }
-        /* give the children the signal to die */
-        for (i = 0; i < num_daemons;) {
-            if ((rv = apr_file_write(pipe_of_death_out, &char_of_death,
-                                     &one)) != APR_SUCCESS) {
-                if (APR_STATUS_IS_EINTR(rv)) continue;
-                ap_log_error(APLOG_MARK, APLOG_WARNING, rv, ap_server_conf,
-                             "write pipe_of_death");
-            }
-            i++;
-        }
-    }
-    else {
-        /* Kill 'em all.  Since the child acts the same on the parents SIGTERM 
-         * and a SIGHUP, we may as well use the same signal, because some user
-         * pthreads are stealing signals from us left and right.
-         */
-        if (unixd_killpg(getpgrp(), SIGTERM) < 0) {
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf,
-                         "killpg SIGTERM");
-        }
-        ap_reclaim_child_processes(1);      /* Start with SIGTERM */
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                     ap_server_conf, "SIGHUP received.  Attempting to restart");
-    }
-    return 0;
-}
-
-/* This really should be a post_config hook, but the error log is already
- * redirected by that point, so we need to do this in the open_logs phase.
- */
-static int perchild_open_logs(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
-{
-    apr_status_t rv;
-
-    pconf = p;
-    ap_server_conf = s;
-
-    if ((num_listensocks = ap_setup_listeners(ap_server_conf)) < 1) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT|APLOG_STARTUP, 0,
-                     NULL, "no listening sockets available, shutting down");
-        return DONE;
-    }
-
-    ap_log_pid(pconf, ap_pid_fname);
-
-    if ((rv = ap_mpm_pod_open(pconf, &pod))) {
-        ap_log_error(APLOG_MARK, APLOG_CRIT|APLOG_STARTUP, rv, NULL,
-                "Could not open pipe-of-death.");
-        return DONE;
-    }
-
-    if ((rv = apr_file_pipe_create(&pipe_of_death_in, &pipe_of_death_out,
-                                   pconf)) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, rv,
-                     (const server_rec*) ap_server_conf,
-                     "apr_file_pipe_create (pipe_of_death)");
-        exit(1);
-    }
-    if ((rv = apr_file_pipe_timeout_set(pipe_of_death_in, 0)) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, rv,
-                     (const server_rec*) ap_server_conf,
-                     "apr_file_pipe_timeout_set (pipe_of_death)");
-        exit(1);
-    }
-
-    return OK;
-}
-
-static int perchild_pre_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp)
-{
-    static int restart_num = 0;
-    int no_detach, debug, foreground;
-    ap_directive_t *pdir;
-    int i;
-    int tmp_server_limit = DEFAULT_SERVER_LIMIT;
-    int tmp_thread_limit = DEFAULT_THREAD_LIMIT;
-    apr_status_t rv;
-
-    debug = ap_exists_config_define("DEBUG");
-
-    if (debug) {
-        foreground = one_process = 1;
-        no_detach = 0;
-    }
-    else {
-        one_process = ap_exists_config_define("ONE_PROCESS");
-        no_detach = ap_exists_config_define("NO_DETACH");
-        foreground = ap_exists_config_define("FOREGROUND");
-    }
-
-    /* sigh, want this only the second time around */
-    if (restart_num++ == 1) {
-        is_graceful = 0;
-
-        if (!one_process && !foreground) {
-            rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND
-                                           : APR_PROC_DETACH_DAEMONIZE);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL,
-                             "apr_proc_detach failed");
-                return HTTP_INTERNAL_SERVER_ERROR;
-            }                  
-        }
-
-        my_pid = getpid();
-    }
-
-    unixd_pre_config(ptemp);
-    ap_listen_pre_config();
-    num_daemons = DEFAULT_NUM_DAEMON;
-    threads_to_start = DEFAULT_START_THREAD;
-    min_spare_threads = DEFAULT_MIN_SPARE_THREAD;
-    max_spare_threads = DEFAULT_MAX_SPARE_THREAD;
-    max_threads = thread_limit;
-    ap_pid_fname = DEFAULT_PIDLOG;
-    ap_lock_fname = DEFAULT_LOCKFILE;
-    ap_max_requests_per_child = DEFAULT_MAX_REQUESTS_PER_CHILD;
-    curr_child_num = 0;
-#ifdef AP_MPM_WANT_SET_MAX_MEM_FREE
-	ap_max_mem_free = APR_ALLOCATOR_MAX_FREE_UNLIMITED;
-#endif
-
-    apr_cpystrn(ap_coredump_dir, ap_server_root, sizeof(ap_coredump_dir));
-
-    /* we need to know ServerLimit and ThreadLimit before we start processing
-     * the tree because we need to already have allocated child_info_table
-     */
-    for (pdir = ap_conftree; pdir != NULL; pdir = pdir->next) {
-        if (!strcasecmp(pdir->directive, "ServerLimit")) {
-            if (atoi(pdir->args) > tmp_server_limit) {
-                tmp_server_limit = atoi(pdir->args);
-                if (tmp_server_limit > MAX_SERVER_LIMIT) {
-                    tmp_server_limit = MAX_SERVER_LIMIT;
-                }
-            }
-        }
-        else if (!strcasecmp(pdir->directive, "ThreadLimit")) {
-            if (atoi(pdir->args) > tmp_thread_limit) {
-                tmp_thread_limit = atoi(pdir->args);
-                if (tmp_thread_limit > MAX_THREAD_LIMIT) {
-                    tmp_thread_limit = MAX_THREAD_LIMIT;
-                }
-            }
-        }
-    }
-
-    child_info_table = (child_info_t *)apr_pcalloc(p, tmp_server_limit * sizeof(child_info_t));
-    for (i = 0; i < tmp_server_limit; i++) {
-        child_info_table[i].uid = -1;
-        child_info_table[i].gid = -1;
-        child_info_table[i].input = -1;
-        child_info_table[i].output = -1;
-    }
-
-    return OK;
-}
-
-static int pass_request(request_rec *r)
-{
-    int rv;
-    apr_socket_t *thesock = ap_get_module_config(r->connection->conn_config, &core_module);
-    struct msghdr msg;
-    struct cmsghdr *cmsg;
-    int sfd;
-    struct iovec iov[2];
-    conn_rec *c = r->connection;
-    apr_bucket_brigade *bb = apr_brigade_create(r->pool, c->bucket_alloc);
-    apr_bucket_brigade *sockbb;
-    char request_body[HUGE_STRING_LEN] = "\0";
-    apr_size_t l = sizeof(request_body);
-    perchild_header h;
-    apr_bucket *sockbuck;
-    perchild_server_conf *sconf = (perchild_server_conf *)
-                            ap_get_module_config(r->server->module_config, 
-                                                 &mpm_perchild_module);
-
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                 "passing request to another child.  Vhost: %s, child %d %d",
-                 apr_table_get(r->headers_in, "Host"), child_num, sconf->output);
-    ap_get_brigade(r->connection->input_filters, bb, AP_MODE_EXHAUSTIVE, APR_NONBLOCK_READ,
-                   0);
-
-    for (sockbuck = APR_BRIGADE_FIRST(bb); sockbuck != APR_BRIGADE_SENTINEL(bb);
-         sockbuck = APR_BUCKET_NEXT(sockbuck)) {
-        if (APR_BUCKET_IS_SOCKET(sockbuck)) {
-            break;
-        }
-    }
-    
-    if (!sockbuck) {
-    }
-    sockbb = apr_brigade_split(bb, sockbuck); 
-
-    if (apr_brigade_flatten(bb, request_body, &l) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                     "Unable to flatten brigade, declining request");
-        return DECLINED;
-    }
-
-    apr_os_sock_get(&sfd, thesock);
-
-    h.p = r->pool;
-    h.headers = apr_pstrcat(h.p, r->the_request, CRLF, "Host: ", r->hostname, 
-                            CRLF, NULL);
-    apr_table_do((int (*) (void *, const char *, const char *))
-                 perchild_header_field, (void *) &h, r->headers_in, NULL); 
-    h.headers = apr_pstrcat(h.p, h.headers, CRLF, NULL);
-
-    iov[0].iov_base = h.headers;
-    iov[0].iov_len = strlen(h.headers) + 1;
-    iov[1].iov_base = request_body;
-    iov[1].iov_len = l + 1;
-
-    msg.msg_name = NULL;
-    msg.msg_namelen = 0;
-    msg.msg_iov = iov;
-    msg.msg_iovlen = 2;
-
-    cmsg = apr_palloc(r->pool, sizeof(*cmsg) + sizeof(sfd));
-    cmsg->cmsg_len = sizeof(*cmsg) + sizeof(sfd);
-    cmsg->cmsg_level = SOL_SOCKET;
-    cmsg->cmsg_type = SCM_RIGHTS;
-
-    memcpy(CMSG_DATA(cmsg), &sfd, sizeof(sfd));
-
-    msg.msg_control = cmsg;
-    msg.msg_controllen = cmsg->cmsg_len;
-
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                 "Writing message to %d, passing sd:  %d", sconf->output, sfd);
-
-    if ((rv = sendmsg(sconf->output, &msg, 0)) == -1) {
-        apr_pool_destroy(r->pool);
-        ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                 "Writing message failed %d %d", rv, errno);
-        return -1;
-    }
-
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                 "Writing message succeeded %d", rv);
-
-    apr_pool_destroy(r->pool);
-    return 1;
-}
-
-static char *make_perchild_socket(const char *fullsockname, int sd[2])
-{
-    socketpair(PF_UNIX, SOCK_STREAM, 0, sd);
-    return NULL;
-}
-
-static int perchild_post_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
-{
-    int i;
-    server_rec *sr;
-    perchild_server_conf *sconf;
-    int def_sd[2];
-
-    def_sd[0] = -1;
-    def_sd[1] = -1;
-
-    for (sr = s; sr; sr = sr->next) {
-        sconf = (perchild_server_conf *)ap_get_module_config(sr->module_config,
-                                                      &mpm_perchild_module);
-
-        if (sconf->input == -1) {
-            sconf->fullsockname = apr_pstrcat(sr->process->pool, 
-                                             sconf->sockname, ".DEFAULT", NULL);
-            if (def_sd[0] == -1) {
-                if (!make_perchild_socket(sconf->fullsockname, def_sd)) {
-                    /* log error */
-                }
-            }
-            sconf->input = def_sd[0];
-            sconf->output = def_sd[1];
-        }
-    }
-
-    for (i = 0; i < num_daemons; i++) {
-        if (child_info_table[i].uid == -1) {
-            child_info_table[i].input = def_sd[0];
-            child_info_table[i].output = def_sd[1];
-        }
-    }
-
-    thread_socket_table = (int *)apr_pcalloc(p, thread_limit * sizeof(int));
-    for (i = 0; i < thread_limit; i++) {
-        thread_socket_table[i] = AP_PERCHILD_THISCHILD;
-    }
-    ap_child_table = (ap_ctable *)apr_pcalloc(p, server_limit * sizeof(ap_ctable));
-
-    return OK;
-}
-
-static int perchild_post_read(request_rec *r)
-{
-    int thread_num = r->connection->id % thread_limit;
-    perchild_server_conf *sconf = (perchild_server_conf *)
-                            ap_get_module_config(r->server->module_config, 
-                                                 &mpm_perchild_module);
-
-    if (thread_socket_table[thread_num] != AP_PERCHILD_THISCHILD) {
-        apr_socket_t *csd = NULL;
-
-        apr_os_sock_put(&csd, &thread_socket_table[thread_num], 
-                        r->connection->pool);
-        ap_sock_disable_nagle(csd);
-        ap_set_module_config(r->connection->conn_config, &core_module, csd);
-        return OK;
-    }
-    else {
-        ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                     "Determining if request should be passed. "
-                     "Child Num: %d, SD: %d, sd from table: %d, hostname from server: %s", child_num, 
-                     sconf->input, child_info_table[child_num].input, 
-                     r->server->server_hostname);
-        /* sconf is the server config for this vhost, so if our socket
-         * is not the same that was set in the config, then the request
-         * needs to be passed to another child. */
-        if (sconf->input != child_info_table[child_num].input) {
-            ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, 
-                         "Passing request.");
-            if (pass_request(r) == -1) {
-                ap_log_error(APLOG_MARK, APLOG_ERR, 0,
-                             ap_server_conf, "Could not pass request to proper "
-                             "child, request will not be honored.");
-            }
-            longjmp(jmpbuffer, 1); 
-        }
-        return OK;
-    }
-    return OK;
-}
-
-static void perchild_hooks(apr_pool_t *p)
-{
-    /* The perchild open_logs phase must run before the core's, or stderr
-     * will be redirected to a file, and the messages won't print to the
-     * console.
-     */
-    static const char *const aszSucc[] = {"core.c", NULL};
-    one_process = 0;
-
-    ap_hook_open_logs(perchild_open_logs, NULL, aszSucc, APR_HOOK_MIDDLE);
-    ap_hook_pre_config(perchild_pre_config, NULL, NULL, APR_HOOK_MIDDLE); 
-    ap_hook_post_config(perchild_post_config, NULL, NULL, APR_HOOK_MIDDLE); 
-
-    /* Both of these must be run absolutely first.  If this request isn't for 
-     * this server then we need to forward it to the proper child.  No sense
-     * tying up this server running more post_read request hooks if it is
-     * just going to be forwarded along.  The process_connection hook allows
-     * perchild to receive the passed request correctly, by automatically
-     * filling in the core_input_filter's ctx pointer.
-     */
-    ap_hook_post_read_request(perchild_post_read, NULL, NULL,
-                              APR_HOOK_REALLY_FIRST);
-    ap_hook_process_connection(perchild_process_connection, NULL, NULL, 
-                               APR_HOOK_REALLY_FIRST);
-}
-
-static const char *set_num_daemons(cmd_parms *cmd, void *dummy,
-                                   const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    num_daemons = atoi(arg);
-    if (num_daemons > server_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: NumServers of %d exceeds ServerLimit value "
-                    "of %d servers,", num_daemons, server_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering NumServers to %d.  To increase, please "
-                    "see the", server_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " ServerLimit directive.");
-       num_daemons = server_limit;
-    } 
-    else if (num_daemons < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require NumServers > 0, setting to 1");
-        num_daemons = 1;
-    }
-    return NULL;
-}
-
-static const char *set_threads_to_start(cmd_parms *cmd, void *dummy,
-                                        const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    threads_to_start = atoi(arg);
-    if (threads_to_start > thread_limit) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: StartThreads of %d exceeds ThreadLimit value"
-                     " of %d threads,", threads_to_start,
-                     thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     " lowering StartThreads to %d. To increase, please"
-                     " see the", thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     " ThreadLimit directive.");
-    }
-    else if (threads_to_start < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require StartThreads > 0, setting to 1");
-        threads_to_start = 1;
-    }
-    return NULL;
-}
-
-static const char *set_min_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    min_spare_threads = atoi(arg);
-    if (min_spare_threads <= 0) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MinSpareThreads set to non-positive.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Resetting to 1 to avoid almost certain Apache failure.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Please read the documentation.");
-       min_spare_threads = 1;
-    }
-       
-    return NULL;
-}
-
-static const char *set_max_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    max_spare_threads = atoi(arg);
-    if (max_spare_threads >= thread_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MinSpareThreads set higher than");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "ThreadLimit. Resetting to %d", thread_limit);
-       max_spare_threads = thread_limit;
-    }
-    return NULL;
-}
-
-static const char *set_max_threads(cmd_parms *cmd, void *dummy, const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    max_threads = atoi(arg);
-    if (max_threads > thread_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MaxThreadsPerChild set higher than");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "ThreadLimit. Resetting to %d", thread_limit);
-       max_threads = thread_limit;
-    }
-    return NULL;
-}
-
-static const char *set_child_per_uid(cmd_parms *cmd, void *dummy, const char *u,
-                                     const char *g, const char *num)
-{
-    int i;
-    int max_this_time = atoi(num) + curr_child_num;
-    
-
-    for (i = curr_child_num; i < max_this_time; i++, curr_child_num++) {
-        if (i > num_daemons) {
-            return "Trying to use more child ID's than NumServers.  Increase "
-                   "NumServers in your config file.";
-        }
-    
-        child_info_table[i].uid = ap_uname2id(u);
-        child_info_table[i].gid = ap_gname2id(g); 
-
-#ifndef BIG_SECURITY_HOLE
-        if (child_info_table[i].uid == 0 || child_info_table[i].gid == 0) {
-            return "Assigning root user/group to a child.";
-        }
-#endif
-    }
-    return NULL;
-}
-
-static const char *assign_childuid(cmd_parms *cmd, void *dummy, const char *uid,
-                                   const char *gid)
-{
-    int i;
-    int matching = 0;
-    int u = ap_uname2id(uid);
-    int g = ap_gname2id(gid);
-    const char *errstr;
-    int socks[2];
-    perchild_server_conf *sconf = (perchild_server_conf *)
-                            ap_get_module_config(cmd->server->module_config, 
-                                                 &mpm_perchild_module);
-
-    sconf->fullsockname = apr_pstrcat(cmd->pool, sconf->sockname, ".", uid,
-                                      ":", gid, NULL);
-
-    if ((errstr = make_perchild_socket(sconf->fullsockname, socks))) {
-        return errstr;
-    }
-
-    sconf->input = socks[0]; 
-    sconf->output = socks[1];
-
-    for (i = 0; i < num_daemons; i++) {
-        if (u == child_info_table[i].uid && g == child_info_table[i].gid) {
-            child_info_table[i].input = sconf->input;
-            child_info_table[i].output = sconf->output;
-            matching++;
-            ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, cmd->server, 
-                         "filling out child_info_table; UID: %d, GID: %d, "
-                         "SD: %d %d, OUTPUT: %d %d, Child Num: %d", 
-                         child_info_table[i].uid, child_info_table[i].gid, 
-                         sconf->input, child_info_table[i].input, sconf->output,
-                         child_info_table[i].output, i);
-        }
-    }
-
-    if (!matching) {
-        return "Unable to find process with matching uid/gid.";
-    }
-    return NULL;
-}
-
-static const char *set_server_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_server_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_server_limit = atoi(arg);
-    /* you cannot change ServerLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_server_limit &&
-        tmp_server_limit != server_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    server_limit = tmp_server_limit;
-    
-    if (server_limit > MAX_SERVER_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ServerLimit of %d exceeds compile time limit "
-                    "of %d servers,", server_limit, MAX_SERVER_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ServerLimit to %d.", MAX_SERVER_LIMIT);
-       server_limit = MAX_SERVER_LIMIT;
-    } 
-    else if (server_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ServerLimit > 0, setting to 1");
-	server_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_thread_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_thread_limit = atoi(arg);
-    /* you cannot change ThreadLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_thread_limit &&
-        tmp_thread_limit != thread_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    thread_limit = tmp_thread_limit;
-    
-    if (thread_limit > MAX_THREAD_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ThreadLimit of %d exceeds compile time limit "
-                    "of %d servers,", thread_limit, MAX_THREAD_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ThreadLimit to %d.", MAX_THREAD_LIMIT);
-       thread_limit = MAX_THREAD_LIMIT;
-    } 
-    else if (thread_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadLimit > 0, setting to 1");
-	thread_limit = 1;
-    }
-    return NULL;
-}
-
-static const command_rec perchild_cmds[] = {
-UNIX_DAEMON_COMMANDS,
-LISTEN_COMMANDS,
-AP_INIT_TAKE1("NumServers", set_num_daemons, NULL, RSRC_CONF,
-              "Number of children alive at the same time"),
-AP_INIT_TAKE1("StartThreads", set_threads_to_start, NULL, RSRC_CONF,
-              "Number of threads each child creates"),
-AP_INIT_TAKE1("MinSpareThreads", set_min_spare_threads, NULL, RSRC_CONF,
-              "Minimum number of idle threads per child, to handle "
-              "request spikes"),
-AP_INIT_TAKE1("MaxSpareThreads", set_max_spare_threads, NULL, RSRC_CONF,
-              "Maximum number of idle threads per child"),
-AP_INIT_TAKE1("MaxThreadsPerChild", set_max_threads, NULL, RSRC_CONF,
-              "Maximum number of threads per child"),
-AP_INIT_TAKE3("ChildperUserID", set_child_per_uid, NULL, RSRC_CONF,
-              "Specify a User and Group for a specific child process."),
-AP_INIT_TAKE2("AssignUserID", assign_childuid, NULL, RSRC_CONF,
-              "Tie a virtual host to a specific child process."),
-AP_INIT_TAKE1("ServerLimit", set_server_limit, NULL, RSRC_CONF,
-              "Maximum value of NumServers for this run of Apache"),
-AP_INIT_TAKE1("ThreadLimit", set_thread_limit, NULL, RSRC_CONF,
-              "Maximum worker threads in a server for this run of Apache"),
-{ NULL }
-};
-
-static void *perchild_create_config(apr_pool_t *p, server_rec *s)
-{
-    perchild_server_conf *c = (perchild_server_conf *)
-                                  apr_pcalloc(p, sizeof(perchild_server_conf));
-
-    c->input = -1;
-    c->output = -1;
-    return c;
-}
-
-module AP_MODULE_DECLARE_DATA mpm_perchild_module = {
-    MPM20_MODULE_STUFF,
-    ap_mpm_rewrite_args,        /* hook to run before apache parses args */
-    NULL,                       /* create per-directory config structure */
-    NULL,                       /* merge per-directory config structures */
-    perchild_create_config,     /* create per-server config structure */
-    NULL,                       /* merge per-server config structures */
-    perchild_cmds,              /* command apr_table_t */
-    perchild_hooks              /* register_hooks */
-};
-
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/Makefile.in b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/Makefile.in
deleted file mode 100644
index ea0acb69..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/Makefile.in
+++ /dev/null
@@ -1,5 +0,0 @@
-
-LTLIBRARY_NAME    = libthreadpool.la
-LTLIBRARY_SOURCES = threadpool.c pod.c
-
-include $(top_srcdir)/build/ltlib.mk
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/README b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/README
deleted file mode 100644
index 86e8524c..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/README
+++ /dev/null
@@ -1,12 +0,0 @@
-Threadpool MPM:
-This is an experimental variant of the standard worker MPM.
-Rather than queuing connections like the worker MPM, the threadpool
-MPM queues idle worker threads and hands each accepted connection
-to the next available worker.
-
-The threadpool MPM can't match the performance of the worker MPM
-in benchmark testing.  As of 2.0.39, some of the key load-throtting
-concepts from the threadpool MPM have been incorporated into the
-worker MPM.  The threadpool code is useful primarily as a research
-platform; for general-purpose use, and for any production environments,
-use worker instead.
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/config5.m4 b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/config5.m4
deleted file mode 100644
index 667b534a..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/config5.m4
+++ /dev/null
@@ -1,6 +0,0 @@
-dnl ## XXX - Need a more thorough check of the proper flags to use
-
-if test "$MPM_NAME" = "threadpool" ; then
-    AC_CHECK_FUNCS(pthread_kill)
-    APACHE_FAST_OUTPUT(server/mpm/$MPM_SUBDIR_NAME/Makefile)
-fi
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm.h
deleted file mode 100644
index 222040bd..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "scoreboard.h"
-#include "unixd.h"
-
-#ifndef APACHE_MPM_THREADPOOL_H
-#define APACHE_MPM_THREADPOOL_H
-
-#define THREADPOOL_MPM
-
-#define MPM_NAME "ThreadPool"
-
-#define AP_MPM_WANT_RECLAIM_CHILD_PROCESSES
-#define AP_MPM_WANT_WAIT_OR_TIMEOUT
-#define AP_MPM_WANT_PROCESS_CHILD_STATUS
-#define AP_MPM_WANT_SET_PIDFILE
-#define AP_MPM_WANT_SET_SCOREBOARD
-#define AP_MPM_WANT_SET_LOCKFILE
-#define AP_MPM_WANT_SET_MAX_REQUESTS
-#define AP_MPM_WANT_SET_COREDUMPDIR
-#define AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-#define AP_MPM_WANT_SIGNAL_SERVER
-#define AP_MPM_WANT_SET_MAX_MEM_FREE
-#define AP_MPM_WANT_FATAL_SIGNAL_HANDLER
-#define AP_MPM_DISABLE_NAGLE_ACCEPTED_SOCK
-
-#define MPM_CHILD_PID(i) (ap_scoreboard_image->parent[i].pid)
-#define MPM_NOTE_CHILD_KILLED(i) (MPM_CHILD_PID(i) = 0)
-#define MPM_ACCEPT_FUNC unixd_accept
-
-extern int ap_threads_per_child;
-extern int ap_max_daemons_limit;
-extern server_rec *ap_server_conf;
-extern char ap_coredump_dir[MAX_STRING_LEN];
-
-#endif /* APACHE_MPM_THREADPOOL_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm_default.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm_default.h
deleted file mode 100644
index d5a33989..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/mpm_default.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef APACHE_MPM_DEFAULT_H
-#define APACHE_MPM_DEFAULT_H
-
-/* Number of servers to spawn off by default --- also, if fewer than
- * this free when the caretaker checks, it will spawn more.
- */
-#ifndef DEFAULT_START_DAEMON
-#define DEFAULT_START_DAEMON 3
-#endif
-
-/* Maximum number of *free* server processes --- more than this, and
- * they will die off.
- */
-
-#ifndef DEFAULT_MAX_FREE_DAEMON
-#define DEFAULT_MAX_FREE_DAEMON 10
-#endif
-
-/* Minimum --- fewer than this, and more will be created */
-
-#ifndef DEFAULT_MIN_FREE_DAEMON
-#define DEFAULT_MIN_FREE_DAEMON 3
-#endif
-
-#ifndef DEFAULT_THREADS_PER_CHILD
-#define DEFAULT_THREADS_PER_CHILD 25
-#endif
-
-/* File used for accept locking, when we use a file */
-#ifndef DEFAULT_LOCKFILE
-#define DEFAULT_LOCKFILE DEFAULT_REL_RUNTIMEDIR "/accept.lock"
-#endif
-
-/* Where the main/parent process's pid is logged */
-#ifndef DEFAULT_PIDLOG
-#define DEFAULT_PIDLOG DEFAULT_REL_RUNTIMEDIR "/httpd.pid"
-#endif
-
-/*
- * Interval, in microseconds, between scoreboard maintenance.
- */
-#ifndef SCOREBOARD_MAINTENANCE_INTERVAL
-#define SCOREBOARD_MAINTENANCE_INTERVAL 1000000
-#endif
-
-/* Number of requests to try to handle in a single process.  If <= 0,
- * the children don't die off.
- */
-#ifndef DEFAULT_MAX_REQUESTS_PER_CHILD
-#define DEFAULT_MAX_REQUESTS_PER_CHILD 10000
-#endif
-
-#endif /* AP_MPM_DEFAULT_H */
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.c b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.c
deleted file mode 100644
index 2f26130c..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "pod.h"
-
-#if APR_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-AP_DECLARE(apr_status_t) ap_mpm_pod_open(apr_pool_t *p, ap_pod_t **pod)
-{
-    apr_status_t rv;
-
-    *pod = apr_palloc(p, sizeof(**pod));
-    rv = apr_file_pipe_create(&((*pod)->pod_in), &((*pod)->pod_out), p);
-    if (rv != APR_SUCCESS) {
-        return rv;
-    }
-/*
-    apr_file_pipe_timeout_set((*pod)->pod_in, 0);
-*/
-    (*pod)->p = p;
-    
-    return APR_SUCCESS;
-}
-
-AP_DECLARE(int) ap_mpm_pod_check(ap_pod_t *pod)
-{
-    char c;
-    apr_os_file_t fd;
-    int rc;
-
-    /* we need to surface EINTR so we'll have to grab the
-     * native file descriptor and do the OS read() ourselves
-     */
-    apr_os_file_get(&fd, pod->pod_in);
-    rc = read(fd, &c, 1);
-    if (rc == 1) {
-        switch(c) {
-        case RESTART_CHAR:
-            return AP_RESTART;
-        case GRACEFUL_CHAR:
-            return AP_GRACEFUL;
-        }
-    }
-    return AP_NORESTART;
-}
-
-AP_DECLARE(apr_status_t) ap_mpm_pod_close(ap_pod_t *pod)
-{
-    apr_status_t rv;
-
-    rv = apr_file_close(pod->pod_out);
-    if (rv != APR_SUCCESS) {
-        return rv;
-    }
-
-    rv = apr_file_close(pod->pod_in);
-    if (rv != APR_SUCCESS) {
-        return rv;
-    }
-    return rv;
-}
-
-static apr_status_t pod_signal_internal(ap_pod_t *pod, int graceful)
-{
-    apr_status_t rv;
-    char char_of_death = graceful ? GRACEFUL_CHAR : RESTART_CHAR;
-    apr_size_t one = 1;
-
-    do {
-        rv = apr_file_write(pod->pod_out, &char_of_death, &one);
-    } while (APR_STATUS_IS_EINTR(rv));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, rv, ap_server_conf,
-                     "write pipe_of_death");
-    }
-    return rv;
-}
-
-AP_DECLARE(apr_status_t) ap_mpm_pod_signal(ap_pod_t *pod, int graceful)
-{
-    return pod_signal_internal(pod, graceful);
-}
-
-AP_DECLARE(void) ap_mpm_pod_killpg(ap_pod_t *pod, int num, int graceful)
-{
-    int i;
-    apr_status_t rv = APR_SUCCESS;
-
-    for (i = 0; i < num && rv == APR_SUCCESS; i++) {
-        rv = pod_signal_internal(pod, graceful);
-    }
-}
-
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.h b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.h
deleted file mode 100644
index 21651e6f..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/pod.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "apr.h"
-#include "apr_strings.h"
-#define APR_WANT_STRFUNC
-#include "apr_want.h"
-
-#include "httpd.h"
-#include "http_config.h"
-#include "http_log.h"
-#include "http_main.h"
-#include "mpm.h"
-#include "mpm_common.h"
-#include "ap_mpm.h"
-#include "ap_listen.h"
-#include "mpm_default.h"
-
-#define RESTART_CHAR '$'
-#define GRACEFUL_CHAR '!'
-
-#define AP_RESTART  0
-#define AP_GRACEFUL 1
-
-typedef struct ap_pod_t ap_pod_t;
-
-struct ap_pod_t {
-    apr_file_t *pod_in;
-    apr_file_t *pod_out;
-    apr_pool_t *p;
-};
-
-AP_DECLARE(apr_status_t) ap_mpm_pod_open(apr_pool_t *p, ap_pod_t **pod);
-AP_DECLARE(int) ap_mpm_pod_check(ap_pod_t *pod);
-AP_DECLARE(apr_status_t) ap_mpm_pod_close(ap_pod_t *pod);
-AP_DECLARE(apr_status_t) ap_mpm_pod_signal(ap_pod_t *pod, int graceful);
-AP_DECLARE(void) ap_mpm_pod_killpg(ap_pod_t *pod, int num, int graceful);
diff --git a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/threadpool.c b/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/threadpool.c
deleted file mode 100644
index 50de500e..00000000
--- a/rubbos/app/httpd-2.0.64/server/mpm/experimental/threadpool/threadpool.c
+++ /dev/null
@@ -1,2229 +0,0 @@
-/* Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License.  You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* The purpose of this MPM is to fix the design flaws in the threaded
- * model.  Because of the way that pthreads and mutex locks interact,
- * it is basically impossible to cleanly gracefully shutdown a child
- * process if multiple threads are all blocked in accept.  This model
- * fixes those problems.
- */
-
-#include "apr.h"
-#include "apr_portable.h"
-#include "apr_strings.h"
-#include "apr_file_io.h"
-#include "apr_thread_proc.h"
-#include "apr_signal.h"
-#include "apr_poll.h"
-#include "apr_thread_mutex.h"
-#include "apr_thread_cond.h"
-#include "apr_proc_mutex.h"
-#define APR_WANT_STRFUNC
-#include "apr_want.h"
-
-#if APR_HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#if APR_HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#if APR_HAVE_SYS_WAIT_H
-#include <sys/wait.h> 
-#endif
-#ifdef HAVE_SYS_PROCESSOR_H
-#include <sys/processor.h> /* for bindprocessor() */
-#endif
-
-#if !APR_HAS_THREADS
-#error The Worker MPM requires APR threads, but they are unavailable.
-#endif
-
-#define CORE_PRIVATE 
- 
-#include "ap_config.h"
-#include "httpd.h" 
-#include "http_main.h" 
-#include "http_log.h" 
-#include "http_config.h"        /* for read_config */ 
-#include "http_core.h"          /* for get_remote_host */ 
-#include "http_connection.h"
-#include "ap_mpm.h"
-#include "pod.h"
-#include "mpm_common.h"
-#include "ap_listen.h"
-#include "scoreboard.h" 
-#include "mpm_default.h"
-
-#include <signal.h>
-#include <limits.h>             /* for INT_MAX */
-
-/* Limit on the total --- clients will be locked out if more servers than
- * this are needed.  It is intended solely to keep the server from crashing
- * when things get out of hand.
- *
- * We keep a hard maximum number of servers, for two reasons --- first off,
- * in case something goes seriously wrong, we want to stop the fork bomb
- * short of actually crashing the machine we're running on by filling some
- * kernel table.  Secondly, it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_SERVER_LIMIT
-#define DEFAULT_SERVER_LIMIT 16
-#endif
-
-/* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_SERVER_LIMIT
-#define MAX_SERVER_LIMIT 20000
-#endif
-
-/* Limit on the threads per process.  Clients will be locked out if more than
- * this  * server_limit are needed.
- *
- * We keep this for one reason it keeps the size of the scoreboard file small
- * enough that we can read the whole thing without worrying too much about
- * the overhead.
- */
-#ifndef DEFAULT_THREAD_LIMIT
-#define DEFAULT_THREAD_LIMIT 64 
-#endif
-
-/* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT.  We want
- * some sort of compile-time limit to help catch typos.
- */
-#ifndef MAX_THREAD_LIMIT
-#define MAX_THREAD_LIMIT 20000
-#endif
-
-/*
- * Actual definitions of config globals
- */
-
-int ap_threads_per_child = 0;         /* Worker threads per child */
-static int ap_daemons_to_start = 0;
-static int min_spare_threads = 0;
-static int max_spare_threads = 0;
-static int ap_daemons_limit = 0;
-static int server_limit = DEFAULT_SERVER_LIMIT;
-static int first_server_limit;
-static int thread_limit = DEFAULT_THREAD_LIMIT;
-static int first_thread_limit;
-static int changed_limit_at_restart;
-static int dying = 0;
-static int workers_may_exit = 0;
-static int start_thread_may_exit = 0;
-static int listener_may_exit = 0;
-static int requests_this_child;
-static int num_listensocks = 0;
-static int resource_shortage = 0;
-static int mpm_state = AP_MPMQ_STARTING;
-
-/* The structure used to pass unique initialization info to each thread */
-typedef struct {
-    int pid;
-    int tid;
-    int sd;
-} proc_info;
-
-/* Structure used to pass information to the thread responsible for 
- * creating the rest of the threads.
- */
-typedef struct {
-    apr_thread_t **threads;
-    apr_thread_t *listener;
-    int child_num_arg;
-    apr_threadattr_t *threadattr;
-} thread_starter;
-
-#define ID_FROM_CHILD_THREAD(c, t)    ((c * thread_limit) + t)
-
-/*
- * The max child slot ever assigned, preserved across restarts.  Necessary
- * to deal with MaxClients changes across AP_SIG_GRACEFUL restarts.  We 
- * use this value to optimize routines that have to scan the entire 
- * scoreboard.
- */
-int ap_max_daemons_limit = -1;
-
-static ap_pod_t *pod;
-
-/* *Non*-shared http_main globals... */
-
-server_rec *ap_server_conf;
-
-/* The worker MPM respects a couple of runtime flags that can aid
- * in debugging. Setting the -DNO_DETACH flag will prevent the root process
- * from detaching from its controlling terminal. Additionally, setting
- * the -DONE_PROCESS flag (which implies -DNO_DETACH) will get you the
- * child_main loop running in the process which originally started up.
- * This gives you a pretty nice debugging environment.  (You'll get a SIGHUP
- * early in standalone_main; just continue through.  This is the server
- * trying to kill off any child processes which it might have lying
- * around --- Apache doesn't keep track of their pids, it just sends
- * SIGHUP to the process group, ignoring it in the root process.
- * Continue through and you'll be fine.).
- */
-
-static int one_process = 0;
-
-#ifdef DEBUG_SIGSTOP
-int raise_sigstop_flags;
-#endif
-
-static apr_pool_t *pconf;                 /* Pool for config stuff */
-static apr_pool_t *pchild;                /* Pool for httpd child stuff */
-
-static pid_t ap_my_pid; /* Linux getpid() doesn't work except in main 
-                           thread. Use this instead */
-static pid_t parent_pid;
-static apr_os_thread_t *listener_os_thread;
-
-/* Locks for accept serialization */
-static apr_proc_mutex_t *accept_mutex;
-
-#if APR_O_NONBLOCK_INHERITED
-#undef SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-#endif /* APR_O_NONBLOCK_INHERITED */
-
-#ifdef SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-#define SAFE_ACCEPT(stmt) (ap_listeners->next ? (stmt) : APR_SUCCESS)
-#else
-#define SAFE_ACCEPT(stmt) (stmt)
-#endif
-
-/* The LISTENER_SIGNAL signal will be sent from the main thread to the 
- * listener thread to wake it up for graceful termination (what a child 
- * process from an old generation does when the admin does "apachectl 
- * graceful").  This signal will be blocked in all threads of a child
- * process except for the listener thread.
- */
-#define LISTENER_SIGNAL     SIGHUP
-
-
-/* Possible states of a worker thread. */
-typedef enum {
-    WORKER_IDLE,
-    WORKER_BUSY,
-    WORKER_TERMINATED
-} worker_state_e;
-
-/* Structure used to wake up an idle worker thread
- */
-typedef struct {
-    apr_pool_t *pool;
-    apr_socket_t *csd;
-    worker_state_e state;
-    apr_thread_cond_t *cond;
-    apr_thread_mutex_t *mutex;
-} worker_wakeup_info;
-
-/* Structure used to hold a stack of idle worker threads 
- */
-typedef struct {
-    apr_thread_mutex_t *mutex;
-    apr_thread_cond_t *cond;
-    worker_wakeup_info **stack;
-    apr_size_t nelts;
-    apr_size_t nalloc;
-    int terminated;
-} worker_stack;
-
-static worker_stack* worker_stack_create(apr_pool_t *pool, apr_size_t max)
-{
-    apr_status_t rv;
-    worker_stack *stack = (worker_stack *)apr_palloc(pool, sizeof(*stack));
-
-    if ((rv = apr_thread_mutex_create(&stack->mutex, APR_THREAD_MUTEX_DEFAULT,
-                                      pool)) != APR_SUCCESS) {
-        return NULL;
-    }
-    if ((rv = apr_thread_cond_create(&stack->cond, pool)) != APR_SUCCESS) {
-        return NULL;
-    }
-    stack->nelts = 0;
-    stack->nalloc = max;
-    stack->stack =
-        (worker_wakeup_info **)apr_palloc(pool, stack->nalloc *
-                                          sizeof(worker_wakeup_info *));
-    stack->terminated = 0;
-    return stack;
-}
-
-static apr_status_t worker_stack_wait(worker_stack *stack,
-                                      worker_wakeup_info *wakeup)
-{
-    apr_status_t rv;
-
-    wakeup->state = WORKER_IDLE;
-    
-    if ((rv = apr_thread_mutex_lock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    if (stack->terminated) {
-        if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-            return rv;
-        }
-        return APR_EOF;
-    }
-    if (stack->nelts == stack->nalloc) {
-        if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-            return rv;
-        }
-        return APR_ENOSPC;
-    }
-    stack->stack[stack->nelts] = wakeup;
-    /* Signal a blocking listener thread only if we just made the
-     * stack non-empty. */
-    if (stack->nelts++ == 0) {
-        (void)apr_thread_cond_signal(stack->cond);
-    }
-    if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-
-    /* At this point we've already added this worker to the stack, now
-     * we just wait until the listener has accept()ed a connection
-     * for us. */
-    if ((rv = apr_thread_mutex_lock(wakeup->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    while (wakeup->state == WORKER_IDLE) {
-        if ((rv = apr_thread_cond_wait(wakeup->cond, wakeup->mutex)) !=
-            APR_SUCCESS) {
-            return rv;
-        }
-    }
-    if ((rv = apr_thread_mutex_unlock(wakeup->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    return APR_SUCCESS;
-}
-
-static apr_status_t worker_stack_pop(worker_stack *stack,
-                                     worker_wakeup_info **worker)
-{
-    apr_status_t rv;
-    if ((rv = apr_thread_mutex_lock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    AP_DEBUG_ASSERT(stack->nelts >= 0);
-    while ((stack->nelts == 0) && (!stack->terminated)) {
-        rv = apr_thread_cond_wait(stack->cond, stack->mutex);
-        if (rv != APR_SUCCESS) {
-            apr_status_t rv2;
-            rv2 = apr_thread_mutex_unlock(stack->mutex);
-            if (rv2 != APR_SUCCESS) {
-                return rv2;
-            }
-            return rv;
-        }
-    }
-    if (stack->terminated) {
-        if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-            return rv;
-        }
-        return APR_EOF;
-    }
-    *worker = stack->stack[--stack->nelts];
-    if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    return APR_SUCCESS;
-}
-
-static apr_status_t worker_stack_terminate(worker_stack *stack)
-{
-    apr_status_t rv;
-    worker_wakeup_info *worker;
-
-    if ((rv = apr_thread_mutex_lock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    stack->terminated = 1;
-    /* Wake up the listener thread. Although there will never be
-     * more than one thread blocking on this condition, broadcast
-     * just in case. */
-    apr_thread_cond_broadcast(stack->cond);
-    while (stack->nelts) {
-        worker = stack->stack[--stack->nelts];
-        apr_thread_mutex_lock(worker->mutex);
-        worker->csd = 0;
-        worker->state = WORKER_TERMINATED;
-        apr_thread_cond_signal(worker->cond);
-        apr_thread_mutex_unlock(worker->mutex);
-    }
-    if ((rv = apr_thread_mutex_unlock(stack->mutex)) != APR_SUCCESS) {
-        return rv;
-    }
-    return APR_SUCCESS;
-}
-
-static worker_stack *idle_worker_stack;
-
-static void wakeup_listener(void)
-{
-    apr_status_t rv;
-
-    listener_may_exit = 1;
-    if (!idle_worker_stack) {
-        return;
-    }
-    if ((rv = apr_thread_mutex_lock(idle_worker_stack->mutex)) != APR_SUCCESS) {
-        return;
-    }
-    if ((rv = apr_thread_cond_signal(idle_worker_stack->cond)) !=
-        APR_SUCCESS) {
-        return;
-    }
-    if ((rv = apr_thread_mutex_unlock(idle_worker_stack->mutex)) != APR_SUCCESS) {
-        return;
-    }
-    if (!listener_os_thread) {
-        /* XXX there is an obscure path that this doesn't handle perfectly:
-         *     right after listener thread is created but before 
-         *     listener_os_thread is set, the first worker thread hits an
-         *     error and starts graceful termination
-         */
-        return;
-    }
-    /*
-     * we should just be able to "kill(ap_my_pid, LISTENER_SIGNAL)" on all
-     * platforms and wake up the listener thread since it is the only thread 
-     * with SIGHUP unblocked, but that doesn't work on Linux
-     */
-#ifdef HAVE_PTHREAD_KILL
-    pthread_kill(*listener_os_thread, LISTENER_SIGNAL);
-#else
-    kill(ap_my_pid, LISTENER_SIGNAL);
-#endif
-}
-
-#define ST_INIT              0
-#define ST_GRACEFUL          1
-#define ST_UNGRACEFUL        2
-
-static int terminate_mode = ST_INIT;
-
-static void signal_threads(int mode)
-{
-    if (terminate_mode == mode) {
-        return;
-    }
-    terminate_mode = mode;
-    mpm_state = AP_MPMQ_STOPPING;
-
-    /* in case we weren't called from the listener thread, wake up the
-     * listener thread
-     */
-    wakeup_listener();
-
-    /* for ungraceful termination, let the workers exit now;
-     * for graceful termination, the listener thread will notify the
-     * workers to exit once it has stopped accepting new connections
-     */
-    if (mode == ST_UNGRACEFUL) {
-        workers_may_exit = 1;
-        worker_stack_terminate(idle_worker_stack);
-    }
-}
-
-AP_DECLARE(apr_status_t) ap_mpm_query(int query_code, int *result)
-{
-    switch(query_code){
-        case AP_MPMQ_MAX_DAEMON_USED:
-            *result = ap_max_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_THREADED:
-            *result = AP_MPMQ_STATIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_IS_FORKED:
-            *result = AP_MPMQ_DYNAMIC;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_DAEMONS:
-            *result = server_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_HARD_LIMIT_THREADS:
-            *result = thread_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_THREADS:
-            *result = ap_threads_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MIN_SPARE_THREADS:    
-            *result = min_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_DAEMONS:
-            *result = 0;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_SPARE_THREADS:
-            *result = max_spare_threads;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_REQUESTS_DAEMON:
-            *result = ap_max_requests_per_child;
-            return APR_SUCCESS;
-        case AP_MPMQ_MAX_DAEMONS:
-            *result = ap_daemons_limit;
-            return APR_SUCCESS;
-        case AP_MPMQ_MPM_STATE:
-            *result = mpm_state;
-            return APR_SUCCESS;
-    }
-    return APR_ENOTIMPL;
-}
-
-/* a clean exit from a child with proper cleanup */ 
-static void clean_child_exit(int code) __attribute__ ((noreturn));
-static void clean_child_exit(int code)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (pchild) {
-        apr_pool_destroy(pchild);
-    }
-    exit(code);
-}
-
-static void just_die(int sig)
-{
-    clean_child_exit(0);
-}
-
-/*****************************************************************
- * Connection structures and accounting...
- */
-
-/* volatile just in case */
-static int volatile shutdown_pending;
-static int volatile restart_pending;
-static int volatile is_graceful;
-static volatile int child_fatal;
-ap_generation_t volatile ap_my_generation;
-
-/*
- * ap_start_shutdown() and ap_start_restart(), below, are a first stab at
- * functions to initiate shutdown or restart without relying on signals. 
- * Previously this was initiated in sig_term() and restart() signal handlers, 
- * but we want to be able to start a shutdown/restart from other sources --
- * e.g. on Win32, from the service manager. Now the service manager can
- * call ap_start_shutdown() or ap_start_restart() as appropiate.  Note that
- * these functions can also be called by the child processes, since global
- * variables are no longer used to pass on the required action to the parent.
- *
- * These should only be called from the parent process itself, since the
- * parent process will use the shutdown_pending and restart_pending variables
- * to determine whether to shutdown or restart. The child process should
- * call signal_parent() directly to tell the parent to die -- this will
- * cause neither of those variable to be set, which the parent will
- * assume means something serious is wrong (which it will be, for the
- * child to force an exit) and so do an exit anyway.
- */
-
-static void ap_start_shutdown(void)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (shutdown_pending == 1) {
-        /* Um, is this _probably_ not an error, if the user has
-         * tried to do a shutdown twice quickly, so we won't
-         * worry about reporting it.
-         */
-        return;
-    }
-    shutdown_pending = 1;
-}
-
-/* do a graceful restart if graceful == 1 */
-static void ap_start_restart(int graceful)
-{
-    mpm_state = AP_MPMQ_STOPPING;
-    if (restart_pending == 1) {
-        /* Probably not an error - don't bother reporting it */
-        return;
-    }
-    restart_pending = 1;
-    is_graceful = graceful;
-}
-
-static void sig_term(int sig)
-{
-    ap_start_shutdown();
-}
-
-static void restart(int sig)
-{
-    ap_start_restart(sig == AP_SIG_GRACEFUL);
-}
-
-static void set_signals(void)
-{
-#ifndef NO_USE_SIGACTION
-    struct sigaction sa;
-#endif
-
-    if (!one_process) {
-        ap_fatal_signal_setup(ap_server_conf, pconf);
-    }
-
-#ifndef NO_USE_SIGACTION
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = 0;
-
-    sa.sa_handler = sig_term;
-    if (sigaction(SIGTERM, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGTERM)");
-#ifdef SIGINT
-    if (sigaction(SIGINT, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGINT)");
-#endif
-#ifdef SIGXCPU
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXCPU, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXCPU)");
-#endif
-#ifdef SIGXFSZ
-    sa.sa_handler = SIG_DFL;
-    if (sigaction(SIGXFSZ, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGXFSZ)");
-#endif
-#ifdef SIGPIPE
-    sa.sa_handler = SIG_IGN;
-    if (sigaction(SIGPIPE, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGPIPE)");
-#endif
-
-    /* we want to ignore HUPs and AP_SIG_GRACEFUL while we're busy 
-     * processing one */
-    sigaddset(&sa.sa_mask, SIGHUP);
-    sigaddset(&sa.sa_mask, AP_SIG_GRACEFUL);
-    sa.sa_handler = restart;
-    if (sigaction(SIGHUP, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(SIGHUP)");
-    if (sigaction(AP_SIG_GRACEFUL, &sa, NULL) < 0)
-        ap_log_error(APLOG_MARK, APLOG_WARNING, errno, ap_server_conf, 
-                     "sigaction(" AP_SIG_GRACEFUL_STRING ")");
-#else
-    if (!one_process) {
-#ifdef SIGXCPU
-        apr_signal(SIGXCPU, SIG_DFL);
-#endif /* SIGXCPU */
-#ifdef SIGXFSZ
-        apr_signal(SIGXFSZ, SIG_DFL);
-#endif /* SIGXFSZ */
-    }
-
-    apr_signal(SIGTERM, sig_term);
-#ifdef SIGHUP
-    apr_signal(SIGHUP, restart);
-#endif /* SIGHUP */
-#ifdef AP_SIG_GRACEFUL
-    apr_signal(AP_SIG_GRACEFUL, restart);
-#endif /* AP_SIG_GRACEFUL */
-#ifdef SIGPIPE
-    apr_signal(SIGPIPE, SIG_IGN);
-#endif /* SIGPIPE */
-
-#endif
-}
-
-/*****************************************************************
- * Here follows a long bunch of generic server bookkeeping stuff...
- */
-
-int ap_graceful_stop_signalled(void)
-    /* XXX this is really a bad confusing obsolete name
-     * maybe it should be ap_mpm_process_exiting?
-     */
-{
-    /* note: for a graceful termination, listener_may_exit will be set before
-     *       workers_may_exit, so check listener_may_exit
-     */
-    return listener_may_exit;
-}
-
-/*****************************************************************
- * Child process main loop.
- */
-
-static void process_socket(apr_pool_t *p, apr_socket_t *sock, int my_child_num,
-                           int my_thread_num, apr_bucket_alloc_t *bucket_alloc)
-{
-    conn_rec *current_conn;
-    long conn_id = ID_FROM_CHILD_THREAD(my_child_num, my_thread_num);
-    int csd;
-    ap_sb_handle_t *sbh;
-
-    ap_create_sb_handle(&sbh, p, my_child_num, my_thread_num);
-    apr_os_sock_get(&csd, sock);
-
-    current_conn = ap_run_create_connection(p, ap_server_conf, sock,
-                                            conn_id, sbh, bucket_alloc);
-    if (current_conn) {
-        ap_process_connection(current_conn, sock);
-        ap_lingering_close(current_conn);
-    }
-}
-
-/* requests_this_child has gone to zero or below.  See if the admin coded
-   "MaxRequestsPerChild 0", and keep going in that case.  Doing it this way
-   simplifies the hot path in worker_thread */
-static void check_infinite_requests(void)
-{
-    if (ap_max_requests_per_child) {
-        signal_threads(ST_GRACEFUL);
-    }
-    else {
-        /* wow! if you're executing this code, you may have set a record.
-         * either this child process has served over 2 billion requests, or
-         * you're running a threaded 2.0 on a 16 bit machine.  
-         *
-         * I'll buy pizza and beers at Apachecon for the first person to do
-         * the former without cheating (dorking with INT_MAX, or running with
-         * uncommitted performance patches, for example).    
-         *
-         * for the latter case, you probably deserve a beer too.   Greg Ames
-         */
-            
-        requests_this_child = INT_MAX;      /* keep going */ 
-    }
-}
-
-static void unblock_signal(int sig)
-{
-    sigset_t sig_mask;
-
-    sigemptyset(&sig_mask);
-    sigaddset(&sig_mask, sig);
-#if defined(SIGPROCMASK_SETS_THREAD_MASK)
-    sigprocmask(SIG_UNBLOCK, &sig_mask, NULL);
-#else
-    pthread_sigmask(SIG_UNBLOCK, &sig_mask, NULL);
-#endif
-}
-
-static void dummy_signal_handler(int sig)
-{
-    /* XXX If specifying SIG_IGN is guaranteed to unblock a syscall,
-     *     then we don't need this goofy function.
-     */
-}
-
-static void *listener_thread(apr_thread_t *thd, void * dummy)
-{
-    proc_info * ti = dummy;
-    int process_slot = ti->pid;
-    apr_pool_t *tpool = apr_thread_pool_get(thd);
-    void *csd = NULL;
-    apr_pool_t *ptrans;                /* Pool for per-transaction stuff */
-    int n;
-    apr_pollfd_t *pollset;
-    apr_status_t rv;
-    ap_listen_rec *lr, *last_lr = ap_listeners;
-    worker_wakeup_info *worker = NULL;
-
-    free(ti);
-
-    apr_poll_setup(&pollset, num_listensocks, tpool);
-    for(lr = ap_listeners ; lr != NULL ; lr = lr->next)
-        apr_poll_socket_add(pollset, lr->sd, APR_POLLIN);
-
-    /* Unblock the signal used to wake this thread up, and set a handler for
-     * it.
-     */
-    unblock_signal(LISTENER_SIGNAL);
-    apr_signal(LISTENER_SIGNAL, dummy_signal_handler);
-
-    /* TODO: Switch to a system where threads reuse the results from earlier
-       poll calls - manoj */
-    while (1) {
-        /* TODO: requests_this_child should be synchronized - aaron */
-        if (requests_this_child <= 0) {
-            check_infinite_requests();
-        }
-        if (listener_may_exit) break;
-
-        if (worker == NULL) {
-            rv = worker_stack_pop(idle_worker_stack, &worker);
-            if (APR_STATUS_IS_EOF(rv)) {
-                break;
-            }
-            else if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "worker_stack_pop failed");
-                break;
-            }
-            ptrans = worker->pool;
-        }
-        AP_DEBUG_ASSERT(worker->state == WORKER_IDLE);
-
-        if ((rv = SAFE_ACCEPT(apr_proc_mutex_lock(accept_mutex)))
-            != APR_SUCCESS) {
-            int level = APLOG_EMERG;
-
-            if (listener_may_exit) {
-                break;
-            }
-            if (ap_scoreboard_image->parent[process_slot].generation != 
-                ap_scoreboard_image->global->running_generation) {
-                level = APLOG_DEBUG; /* common to get these at restart time */
-            }
-            ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                         "apr_proc_mutex_lock failed. Attempting to shutdown "
-                         "process gracefully.");
-            signal_threads(ST_GRACEFUL);
-            break;                    /* skip the lock release */
-        }
-
-        if (!APR_O_NONBLOCK_INHERITED && !ap_listeners->next) {
-            /* Only one listener, so skip the poll */
-            lr = ap_listeners;
-        }
-        else {
-            while (!listener_may_exit) {
-                apr_status_t ret;
-                apr_int16_t event;
-
-                ret = apr_poll(pollset, num_listensocks, &n, -1);
-                if (ret != APR_SUCCESS) {
-                    if (APR_STATUS_IS_EINTR(ret)) {
-                        continue;
-                    }
-
-                    /* apr_poll() will only return errors in catastrophic
-                     * circumstances. Let's try exiting gracefully, for now. */
-                    ap_log_error(APLOG_MARK, APLOG_ERR, ret, (const server_rec *)
-                                 ap_server_conf, "apr_poll: (listen)");
-                    signal_threads(ST_GRACEFUL);
-                }
-
-                if (listener_may_exit) break;
-
-                /* find a listener */
-                lr = last_lr;
-                do {
-                    lr = lr->next;
-                    if (lr == NULL) {
-                        lr = ap_listeners;
-                    }
-                    /* XXX: Should we check for POLLERR? */
-                    apr_poll_revents_get(&event, lr->sd, pollset);
-                    if (event & APR_POLLIN) {
-                        last_lr = lr;
-                        goto got_fd;
-                    }
-                } while (lr != last_lr);
-            }
-        }
-    got_fd:
-        if (!listener_may_exit) {
-            rv = lr->accept_func(&csd, lr, ptrans);
-            /* later we trash rv and rely on csd to indicate success/failure */
-            AP_DEBUG_ASSERT(rv == APR_SUCCESS || !csd);
-
-            if (rv == APR_EGENERAL) {
-                /* E[NM]FILE, ENOMEM, etc */
-                resource_shortage = 1;
-                signal_threads(ST_GRACEFUL);
-            }
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                int level = APLOG_EMERG;
-
-                if (listener_may_exit) {
-                    break;
-                }
-                if (ap_scoreboard_image->parent[process_slot].generation != 
-                    ap_scoreboard_image->global->running_generation) {
-                    level = APLOG_DEBUG; /* common to get these at restart time */
-                }
-                ap_log_error(APLOG_MARK, level, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            if (csd != NULL) {
-                /* Wake up the sleeping worker. */
-                apr_thread_mutex_lock(worker->mutex);
-                worker->csd = (apr_socket_t *)csd;
-                worker->state = WORKER_BUSY;
-                /* Posix allows us to signal this condition without
-                 * owning the associated mutex, but in that case it can
-                 * not guarantee predictable scheduling. See
-                 * _UNIX Network Programming: Interprocess Communication_
-                 * by W. Richard Stevens, Vol 2, 2nd Ed, pp. 170-171. */
-                apr_thread_cond_signal(worker->cond);
-                apr_thread_mutex_unlock(worker->mutex);
-                worker = NULL;
-            }
-        }
-        else {
-            if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(accept_mutex)))
-                != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                             "apr_proc_mutex_unlock failed. Attempting to "
-                             "shutdown process gracefully.");
-                signal_threads(ST_GRACEFUL);
-            }
-            break;
-        }
-    }
-
-    workers_may_exit = 1;
-    if (worker) {
-        apr_thread_mutex_lock(worker->mutex);
-        worker->state = WORKER_TERMINATED;
-        /* Posix allows us to signal this condition without
-         * owning the associated mutex, but in that case it can
-         * not guarantee predictable scheduling. See
-         * _UNIX Network Programming: Interprocess Communication_
-         * by W. Richard Stevens, Vol 2, 2nd Ed, pp. 170-171. */
-        apr_thread_cond_signal(worker->cond);
-        apr_thread_mutex_unlock(worker->mutex);
-    }
-    worker_stack_terminate(idle_worker_stack);
-    dying = 1;
-    ap_scoreboard_image->parent[process_slot].quiescing = 1;
-
-    /* wake up the main thread */
-    kill(ap_my_pid, SIGTERM);
-
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-/* XXX For ungraceful termination/restart, we definitely don't want to
- *     wait for active connections to finish but we may want to wait
- *     for idle workers to get out of the queue code and release mutexes,
- *     since those mutexes are cleaned up pretty soon and some systems
- *     may not react favorably (i.e., segfault) if operations are attempted
- *     on cleaned-up mutexes.
- */
-static void * APR_THREAD_FUNC worker_thread(apr_thread_t *thd, void * dummy)
-{
-    proc_info * ti = dummy;
-    int process_slot = ti->pid;
-    int thread_slot = ti->tid;
-    apr_bucket_alloc_t *bucket_alloc;
-    apr_pool_t *tpool = apr_thread_pool_get(thd);
-    apr_pool_t *ptrans;                /* Pool for per-transaction stuff */
-    apr_allocator_t *allocator;
-    apr_status_t rv;
-    worker_wakeup_info *wakeup;
-
-    free(ti);
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_STARTING, NULL);
-
-    apr_allocator_create(&allocator);
-    apr_allocator_max_free_set(allocator, ap_max_mem_free);
-    /* XXX: why is ptrans's parent not tpool? --jcw 08/2003 */
-    apr_pool_create_ex(&ptrans, NULL, NULL, allocator);
-    apr_allocator_owner_set(allocator, ptrans);
-    bucket_alloc = apr_bucket_alloc_create_ex(allocator);
-
-    wakeup = (worker_wakeup_info *)apr_palloc(tpool, sizeof(*wakeup));
-    wakeup->pool = ptrans;
-    if ((rv = apr_thread_cond_create(&wakeup->cond, tpool)) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "apr_thread_cond_create failed. Attempting to shutdown "
-                     "process gracefully.");
-        signal_threads(ST_GRACEFUL);
-        apr_thread_exit(thd, rv);
-    }
-    if ((rv = apr_thread_mutex_create(&wakeup->mutex, APR_THREAD_MUTEX_DEFAULT,
-                                      tpool)) != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "apr_thread_mutex_create failed. Attempting to shutdown "
-                     "process gracefully.");
-        signal_threads(ST_GRACEFUL);
-        apr_thread_exit(thd, rv);
-    }
-
-    while (!workers_may_exit) {
-        ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_READY, NULL);
-        rv = worker_stack_wait(idle_worker_stack, wakeup);
-        if (APR_STATUS_IS_EOF(rv)) {
-            break; /* The queue has been terminated. */
-        }
-        else if (rv != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                         "worker_stack_wait failed");
-            break; /* Treat all other errors as fatal. */
-        }
-        else if (wakeup->state == WORKER_TERMINATED) {
-            break; /* They told us to quit. */
-        }
-        AP_DEBUG_ASSERT(wakeup->state != WORKER_IDLE);
-        process_socket(ptrans, wakeup->csd,
-                       process_slot, thread_slot, bucket_alloc);
-        requests_this_child--; /* FIXME: should be synchronized - aaron */
-        apr_pool_clear(ptrans);
-    }
-
-    ap_update_child_status_from_indexes(process_slot, thread_slot,
-        (dying) ? SERVER_DEAD : SERVER_GRACEFUL, (request_rec *) NULL);
-
-    apr_bucket_alloc_destroy(bucket_alloc);
-
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static int check_signal(int signum)
-{
-    switch (signum) {
-    case SIGTERM:
-    case SIGINT:
-        return 1;
-    }
-    return 0;
-}
-
-static void create_listener_thread(thread_starter *ts)
-{
-    int my_child_num = ts->child_num_arg;
-    apr_threadattr_t *thread_attr = ts->threadattr;
-    proc_info *my_info;
-    apr_status_t rv;
-
-    my_info = (proc_info *)malloc(sizeof(proc_info));
-    my_info->pid = my_child_num;
-    my_info->tid = -1; /* listener thread doesn't have a thread slot */
-    my_info->sd = 0;
-    rv = apr_thread_create(&ts->listener, thread_attr, listener_thread,
-                           my_info, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "apr_thread_create: unable to create listener thread");
-        /* In case system resources are maxxed out, we don't want
-         * Apache running away with the CPU trying to fork over and
-         * over and over again if we exit.
-         * XXX Jeff doesn't see how Apache is going to try to fork again since
-         * the exit code is APEXIT_CHILDFATAL
-         */
-        apr_sleep(10 * APR_USEC_PER_SEC);
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-    apr_os_thread_get(&listener_os_thread, ts->listener);
-}
-
-/* XXX under some circumstances not understood, children can get stuck
- *     in start_threads forever trying to take over slots which will
- *     never be cleaned up; for now there is an APLOG_DEBUG message issued
- *     every so often when this condition occurs
- */
-static void * APR_THREAD_FUNC start_threads(apr_thread_t *thd, void *dummy)
-{
-    thread_starter *ts = dummy;
-    apr_thread_t **threads = ts->threads;
-    apr_threadattr_t *thread_attr = ts->threadattr;
-    int child_num_arg = ts->child_num_arg;
-    int my_child_num = child_num_arg;
-    proc_info *my_info;
-    apr_status_t rv;
-    int i;
-    int threads_created = 0;
-    int loops;
-    int prev_threads_created;
-
-    idle_worker_stack = worker_stack_create(pchild, ap_threads_per_child);
-    if (idle_worker_stack == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, 0, ap_server_conf,
-                     "worker_stack_create() failed");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    loops = prev_threads_created = 0;
-    while (1) {
-        /* ap_threads_per_child does not include the listener thread */
-        for (i = 0; i < ap_threads_per_child; i++) {
-            int status = ap_scoreboard_image->servers[child_num_arg][i].status;
-
-            if (status != SERVER_GRACEFUL && status != SERVER_DEAD) {
-                continue;
-            }
-
-            my_info = (proc_info *)malloc(sizeof(proc_info));
-            if (my_info == NULL) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                             "malloc: out of memory");
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            my_info->pid = my_child_num;
-            my_info->tid = i;
-            my_info->sd = 0;
-        
-            /* We are creating threads right now */
-            ap_update_child_status_from_indexes(my_child_num, i,
-                                                SERVER_STARTING, NULL);
-            /* We let each thread update its own scoreboard entry.  This is
-             * done because it lets us deal with tid better.
-             */
-            rv = apr_thread_create(&threads[i], thread_attr, 
-                                   worker_thread, my_info, pchild);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                    "apr_thread_create: unable to create worker thread");
-                /* In case system resources are maxxed out, we don't want
-                   Apache running away with the CPU trying to fork over and
-                   over and over again if we exit. */
-                apr_sleep(10 * APR_USEC_PER_SEC);
-                clean_child_exit(APEXIT_CHILDFATAL);
-            }
-            threads_created++;
-            if (threads_created == 1) {
-                /* now that we have a worker thread, it makes sense to create
-                 * a listener thread (we don't want a listener without a worker!)
-                 */
-                create_listener_thread(ts);
-            }
-        }
-        if (start_thread_may_exit || threads_created == ap_threads_per_child) {
-            break;
-        }
-        /* wait for previous generation to clean up an entry */
-        apr_sleep(1 * APR_USEC_PER_SEC);
-        ++loops;
-        if (loops % 120 == 0) { /* every couple of minutes */
-            if (prev_threads_created == threads_created) {
-                ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                             "child %" APR_PID_T_FMT " isn't taking over "
-                             "slots very quickly (%d of %d)",
-                             ap_my_pid, threads_created, ap_threads_per_child);
-            }
-            prev_threads_created = threads_created;
-        }
-    }
-    
-    /* What state should this child_main process be listed as in the 
-     * scoreboard...?
-     *  ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING, 
-     *                                      (request_rec *) NULL);
-     * 
-     *  This state should be listed separately in the scoreboard, in some kind
-     *  of process_status, not mixed in with the worker threads' status.   
-     *  "life_status" is almost right, but it's in the worker's structure, and 
-     *  the name could be clearer.   gla
-     */
-    apr_thread_exit(thd, APR_SUCCESS);
-    return NULL;
-}
-
-static void join_workers(apr_thread_t *listener, apr_thread_t **threads)
-{
-    int i;
-    apr_status_t rv, thread_rv;
-
-    if (listener) {
-        int iter;
-
-        /* deal with a rare timing window which affects waking up the
-         * listener thread...  if the signal sent to the listener thread
-         * is delivered between the time it verifies that the
-         * listener_may_exit flag is clear and the time it enters a
-         * blocking syscall, the signal didn't do any good...  work around
-         * that by sleeping briefly and sending it again
-         */
-
-        iter = 0;
-        while (iter < 10 && 
-#ifdef HAVE_PTHREAD_KILL
-               pthread_kill(*listener_os_thread, 0)
-#else
-               kill(ap_my_pid, 0)
-#endif
-               == 0) {
-            /* listener not dead yet */
-            apr_sleep(APR_USEC_PER_SEC / 2);
-            wakeup_listener();
-            ++iter;
-        }
-        if (iter >= 10) {
-            ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-                         "the listener thread didn't exit");
-        }
-        else {
-            rv = apr_thread_join(&thread_rv, listener);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "apr_thread_join: unable to join listener thread");
-            }
-        }
-    }
-    
-    for (i = 0; i < ap_threads_per_child; i++) {
-        if (threads[i]) { /* if we ever created this thread */
-            rv = apr_thread_join(&thread_rv, threads[i]);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                             "apr_thread_join: unable to join worker "
-                             "thread %d",
-                             i);
-            }
-        }
-    }
-}
-
-static void join_start_thread(apr_thread_t *start_thread_id)
-{
-    apr_status_t rv, thread_rv;
-
-    start_thread_may_exit = 1; /* tell it to give up in case it is still 
-                                * trying to take over slots from a 
-                                * previous generation
-                                */
-    rv = apr_thread_join(&thread_rv, start_thread_id);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf,
-                     "apr_thread_join: unable to join the start "
-                     "thread");
-    }
-}
-
-static void child_main(int child_num_arg)
-{
-    apr_thread_t **threads;
-    apr_status_t rv;
-    thread_starter *ts;
-    apr_threadattr_t *thread_attr;
-    apr_thread_t *start_thread_id;
-
-    mpm_state = AP_MPMQ_STARTING; /* for benefit of any hooks that run as this
-                                   * child initializes
-                                   */
-    ap_my_pid = getpid();
-    ap_fatal_signal_child_setup(ap_server_conf);
-    apr_pool_create(&pchild, pconf);
-
-    /*stuff to do before we switch id's, so we have permissions.*/
-    ap_reopen_scoreboard(pchild, NULL, 0);
-
-    rv = SAFE_ACCEPT(apr_proc_mutex_child_init(&accept_mutex, ap_lock_fname,
-                                               pchild));
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize cross-process lock in child");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (unixd_setup_child()) {
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ap_run_child_init(pchild, ap_server_conf);
-
-    /* done with init critical section */
-
-    /* Just use the standard apr_setup_signal_thread to block all signals
-     * from being received.  The child processes no longer use signals for
-     * any communication with the parent process.
-     */
-    rv = apr_setup_signal_thread();
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf,
-                     "Couldn't initialize signal thread");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    if (ap_max_requests_per_child) {
-        requests_this_child = ap_max_requests_per_child;
-    }
-    else {
-        /* coding a value of zero means infinity */
-        requests_this_child = INT_MAX;
-    }
-    
-    /* Setup worker threads */
-
-    /* clear the storage; we may not create all our threads immediately, 
-     * and we want a 0 entry to indicate a thread which was not created
-     */
-    threads = (apr_thread_t **)calloc(1, 
-                                sizeof(apr_thread_t *) * ap_threads_per_child);
-    if (threads == NULL) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, errno, ap_server_conf,
-                     "malloc: out of memory");
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    ts = (thread_starter *)apr_palloc(pchild, sizeof(*ts));
-
-    apr_threadattr_create(&thread_attr, pchild);
-    /* 0 means PTHREAD_CREATE_JOINABLE */
-    apr_threadattr_detach_set(thread_attr, 0);
-
-    ts->threads = threads;
-    ts->listener = NULL;
-    ts->child_num_arg = child_num_arg;
-    ts->threadattr = thread_attr;
-
-    rv = apr_thread_create(&start_thread_id, thread_attr, start_threads,
-                           ts, pchild);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf,
-                     "apr_thread_create: unable to create worker thread");
-        /* In case system resources are maxxed out, we don't want
-           Apache running away with the CPU trying to fork over and
-           over and over again if we exit. */
-        apr_sleep(10 * APR_USEC_PER_SEC);
-        clean_child_exit(APEXIT_CHILDFATAL);
-    }
-
-    mpm_state = AP_MPMQ_RUNNING;
-    
-    /* If we are only running in one_process mode, we will want to
-     * still handle signals. */
-    if (one_process) {
-        /* Block until we get a terminating signal. */
-        apr_signal_thread(check_signal);
-        /* make sure the start thread has finished; signal_threads() 
-         * and join_workers() depend on that
-         */
-        /* XXX join_start_thread() won't be awakened if one of our
-         *     threads encounters a critical error and attempts to
-         *     shutdown this child
-         */
-        join_start_thread(start_thread_id);
-        signal_threads(ST_UNGRACEFUL); /* helps us terminate a little more
-                           * quickly than the dispatch of the signal thread
-                           * beats the Pipe of Death and the browsers
-                           */
-        /* A terminating signal was received. Now join each of the
-         * workers to clean them up.
-         *   If the worker already exited, then the join frees
-         *   their resources and returns.
-         *   If the worker hasn't exited, then this blocks until
-         *   they have (then cleans up).
-         */
-        join_workers(ts->listener, threads);
-    }
-    else { /* !one_process */
-        /* remove SIGTERM from the set of blocked signals...  if one of
-         * the other threads in the process needs to take us down
-         * (e.g., for MaxRequestsPerChild) it will send us SIGTERM
-         */
-        unblock_signal(SIGTERM);
-        apr_signal(SIGTERM, dummy_signal_handler);
-        /* Watch for any messages from the parent over the POD */
-        while (1) {
-            rv = ap_mpm_pod_check(pod);
-            if (rv == AP_NORESTART) {
-                /* see if termination was triggered while we slept */
-                switch(terminate_mode) {
-                case ST_GRACEFUL:
-                    rv = AP_GRACEFUL;
-                    break;
-                case ST_UNGRACEFUL:
-                    rv = AP_RESTART;
-                    break;
-                }
-            }
-            if (rv == AP_GRACEFUL || rv == AP_RESTART) {
-                /* make sure the start thread has finished; 
-                 * signal_threads() and join_workers depend on that
-                 */
-                join_start_thread(start_thread_id);
-                signal_threads(rv == AP_GRACEFUL ? ST_GRACEFUL : ST_UNGRACEFUL);
-                break;
-            }
-        }
-
-        if (rv == AP_GRACEFUL) {
-            /* A terminating signal was received. Now join each of the
-             * workers to clean them up.
-             *   If the worker already exited, then the join frees
-             *   their resources and returns.
-             *   If the worker hasn't exited, then this blocks until
-             *   they have (then cleans up).
-             */
-            join_workers(ts->listener, threads);
-        }
-    }
-
-    free(threads);
-
-    clean_child_exit(resource_shortage ? APEXIT_CHILDSICK : 0);
-}
-
-static int make_child(server_rec *s, int slot) 
-{
-    int pid;
-
-    if (slot + 1 > ap_max_daemons_limit) {
-        ap_max_daemons_limit = slot + 1;
-    }
-
-    if (one_process) {
-        set_signals();
-        ap_scoreboard_image->parent[slot].pid = getpid();
-        child_main(slot);
-    }
-
-    if ((pid = fork()) == -1) {
-        ap_log_error(APLOG_MARK, APLOG_ERR, errno, s, 
-                     "fork: Unable to fork new process");
-
-        /* fork didn't succeed. Fix the scoreboard or else
-         * it will say SERVER_STARTING forever and ever
-         */
-        ap_update_child_status_from_indexes(slot, 0, SERVER_DEAD, NULL);
-
-        /* In case system resources are maxxed out, we don't want
-           Apache running away with the CPU trying to fork over and
-           over and over again. */
-        apr_sleep(10 * APR_USEC_PER_SEC);
-
-        return -1;
-    }
-
-    if (!pid) {
-#ifdef HAVE_BINDPROCESSOR
-        /* By default, AIX binds to a single processor.  This bit unbinds
-         * children which will then bind to another CPU.
-         */
-        int status = bindprocessor(BINDPROCESS, (int)getpid(),
-                               PROCESSOR_CLASS_ANY);
-        if (status != OK)
-            ap_log_error(APLOG_MARK, APLOG_WARNING, errno, 
-                         ap_server_conf,
-                         "processor unbind failed %d", status);
-#endif
-        RAISE_SIGSTOP(MAKE_CHILD);
-
-        apr_signal(SIGTERM, just_die);
-        child_main(slot);
-
-        clean_child_exit(0);
-    }
-    /* else */
-    ap_scoreboard_image->parent[slot].quiescing = 0;
-    ap_scoreboard_image->parent[slot].pid = pid;
-    return 0;
-}
-
-/* start up a bunch of children */
-static void startup_children(int number_to_start)
-{
-    int i;
-
-    for (i = 0; number_to_start && i < ap_daemons_limit; ++i) {
-        if (ap_scoreboard_image->parent[i].pid != 0) {
-            continue;
-        }
-        if (make_child(ap_server_conf, i) < 0) {
-            break;
-        }
-        --number_to_start;
-    }
-}
-
-
-/*
- * idle_spawn_rate is the number of children that will be spawned on the
- * next maintenance cycle if there aren't enough idle servers.  It is
- * doubled up to MAX_SPAWN_RATE, and reset only when a cycle goes by
- * without the need to spawn.
- */
-static int idle_spawn_rate = 1;
-#ifndef MAX_SPAWN_RATE
-#define MAX_SPAWN_RATE        (32)
-#endif
-static int hold_off_on_exponential_spawning;
-
-static void perform_idle_server_maintenance(void)
-{
-    int i, j;
-    int idle_thread_count;
-    worker_score *ws;
-    process_score *ps;
-    int free_length;
-    int totally_free_length = 0;
-    int free_slots[MAX_SPAWN_RATE];
-    int last_non_dead;
-    int total_non_dead;
-
-    /* initialize the free_list */
-    free_length = 0;
-
-    idle_thread_count = 0;
-    last_non_dead = -1;
-    total_non_dead = 0;
-
-    for (i = 0; i < ap_daemons_limit; ++i) {
-        /* Initialization to satisfy the compiler. It doesn't know
-         * that ap_threads_per_child is always > 0 */
-        int status = SERVER_DEAD;
-        int any_dying_threads = 0;
-        int any_dead_threads = 0;
-        int all_dead_threads = 1;
-
-        if (i >= ap_max_daemons_limit && totally_free_length == idle_spawn_rate)
-            break;
-        ps = &ap_scoreboard_image->parent[i];
-        for (j = 0; j < ap_threads_per_child; j++) {
-            ws = &ap_scoreboard_image->servers[i][j];
-            status = ws->status;
-
-            /* XXX any_dying_threads is probably no longer needed    GLA */
-            any_dying_threads = any_dying_threads || 
-                                (status == SERVER_GRACEFUL);
-            any_dead_threads = any_dead_threads || (status == SERVER_DEAD);
-            all_dead_threads = all_dead_threads &&
-                                   (status == SERVER_DEAD ||
-                                    status == SERVER_GRACEFUL);
-
-            /* We consider a starting server as idle because we started it
-             * at least a cycle ago, and if it still hasn't finished starting
-             * then we're just going to swamp things worse by forking more.
-             * So we hopefully won't need to fork more if we count it.
-             * This depends on the ordering of SERVER_READY and SERVER_STARTING.
-             */
-            if (status <= SERVER_READY && status != SERVER_DEAD &&
-                    !ps->quiescing &&
-                    ps->generation == ap_my_generation &&
-                 /* XXX the following shouldn't be necessary if we clean up 
-                  *     properly after seg faults, but we're not yet    GLA 
-                  */     
-                    ps->pid != 0) {
-                ++idle_thread_count;
-            }
-        }
-        if (any_dead_threads && totally_free_length < idle_spawn_rate 
-                && (!ps->pid               /* no process in the slot */
-                    || ps->quiescing)) {   /* or at least one is going away */
-            if (all_dead_threads) {
-                /* great! we prefer these, because the new process can
-                 * start more threads sooner.  So prioritize this slot 
-                 * by putting it ahead of any slots with active threads.
-                 *
-                 * first, make room by moving a slot that's potentially still
-                 * in use to the end of the array
-                 */
-                free_slots[free_length] = free_slots[totally_free_length];
-                free_slots[totally_free_length++] = i;
-            }
-            else {
-                /* slot is still in use - back of the bus
-                 */
-            free_slots[free_length] = i;
-            }
-            ++free_length;
-        }
-        /* XXX if (!ps->quiescing)     is probably more reliable  GLA */
-        if (!any_dying_threads) {
-            last_non_dead = i;
-            ++total_non_dead;
-        }
-    }
-    ap_max_daemons_limit = last_non_dead + 1;
-
-    if (idle_thread_count > max_spare_threads) {
-        /* Kill off one child */
-        ap_mpm_pod_signal(pod, TRUE);
-        idle_spawn_rate = 1;
-    }
-    else if (idle_thread_count < min_spare_threads) {
-        /* terminate the free list */
-        if (free_length == 0) {
-            /* only report this condition once */
-            static int reported = 0;
-            
-            if (!reported) {
-                ap_log_error(APLOG_MARK, APLOG_ERR, 0, 
-                             ap_server_conf,
-                             "server reached MaxClients setting, consider"
-                             " raising the MaxClients setting");
-                reported = 1;
-            }
-            idle_spawn_rate = 1;
-        }
-        else {
-            if (free_length > idle_spawn_rate) {
-                free_length = idle_spawn_rate;
-            }
-            if (idle_spawn_rate >= 8) {
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0, 
-                             ap_server_conf,
-                             "server seems busy, (you may need "
-                             "to increase StartServers, ThreadsPerChild "
-                             "or Min/MaxSpareThreads), "
-                             "spawning %d children, there are around %d idle "
-                             "threads, and %d total children", free_length,
-                             idle_thread_count, total_non_dead);
-            }
-            for (i = 0; i < free_length; ++i) {
-                make_child(ap_server_conf, free_slots[i]);
-            }
-            /* the next time around we want to spawn twice as many if this
-             * wasn't good enough, but not if we've just done a graceful
-             */
-            if (hold_off_on_exponential_spawning) {
-                --hold_off_on_exponential_spawning;
-            }
-            else if (idle_spawn_rate < MAX_SPAWN_RATE) {
-                idle_spawn_rate *= 2;
-            }
-        }
-    }
-    else {
-      idle_spawn_rate = 1;
-    }
-}
-
-static void server_main_loop(int remaining_children_to_start)
-{
-    int child_slot;
-    apr_exit_why_e exitwhy;
-    int status, processed_status;
-    apr_proc_t pid;
-    int i;
-
-    while (!restart_pending && !shutdown_pending) {
-        ap_wait_or_timeout(&exitwhy, &status, &pid, pconf);
-        
-        if (pid.pid != -1) {
-            processed_status = ap_process_child_status(&pid, exitwhy, status);
-            if (processed_status == APEXIT_CHILDFATAL) {
-                shutdown_pending = 1;
-                child_fatal = 1;
-                return;
-            }
-            /* non-fatal death... note that it's gone in the scoreboard. */
-            child_slot = find_child_by_pid(&pid);
-            if (child_slot >= 0) {
-                for (i = 0; i < ap_threads_per_child; i++)
-                    ap_update_child_status_from_indexes(child_slot, i, SERVER_DEAD, 
-                                                        (request_rec *) NULL);
-                
-                ap_scoreboard_image->parent[child_slot].pid = 0;
-                ap_scoreboard_image->parent[child_slot].quiescing = 0;
-                if (processed_status == APEXIT_CHILDSICK) {
-                    /* resource shortage, minimize the fork rate */
-                    idle_spawn_rate = 1;
-                }
-                else if (remaining_children_to_start
-                    && child_slot < ap_daemons_limit) {
-                    /* we're still doing a 1-for-1 replacement of dead
-                     * children with new children
-                     */
-                    make_child(ap_server_conf, child_slot);
-                    --remaining_children_to_start;
-                }
-#if APR_HAS_OTHER_CHILD
-            }
-            else if (apr_proc_other_child_read(&pid, status) == 0) {
-                /* handled */
-#endif
-            }
-            else if (is_graceful) {
-                /* Great, we've probably just lost a slot in the
-                 * scoreboard.  Somehow we don't know about this child.
-                 */
-                ap_log_error(APLOG_MARK, APLOG_WARNING, 0,
-                             ap_server_conf,
-                             "long lost child came home! (pid %ld)",
-                             (long)pid.pid);
-            }
-            /* Don't perform idle maintenance when a child dies,
-             * only do it when there's a timeout.  Remember only a
-             * finite number of children can die, and it's pretty
-             * pathological for a lot to die suddenly.
-             */
-            continue;
-        }
-        else if (remaining_children_to_start) {
-            /* we hit a 1 second timeout in which none of the previous
-             * generation of children needed to be reaped... so assume
-             * they're all done, and pick up the slack if any is left.
-             */
-            startup_children(remaining_children_to_start);
-            remaining_children_to_start = 0;
-            /* In any event we really shouldn't do the code below because
-             * few of the servers we just started are in the IDLE state
-             * yet, so we'd mistakenly create an extra server.
-             */
-            continue;
-        }
-
-        perform_idle_server_maintenance();
-    }
-}
-
-int ap_mpm_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s)
-{
-    int remaining_children_to_start;
-    apr_status_t rv;
-
-    ap_log_pid(pconf, ap_pid_fname);
-
-    first_server_limit = server_limit;
-    first_thread_limit = thread_limit;
-    if (changed_limit_at_restart) {
-        ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s,
-                     "WARNING: Attempt to change ServerLimit or ThreadLimit "
-                     "ignored during restart");
-        changed_limit_at_restart = 0;
-    }
-    
-    /* Initialize cross-process accept lock */
-    ap_lock_fname = apr_psprintf(_pconf, "%s.%" APR_PID_T_FMT,
-                                 ap_server_root_relative(_pconf, ap_lock_fname),
-                                 ap_my_pid);
-
-    rv = apr_proc_mutex_create(&accept_mutex, ap_lock_fname, 
-                               ap_accept_lock_mech, _pconf);
-    if (rv != APR_SUCCESS) {
-        ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                     "Couldn't create accept lock");
-        mpm_state = AP_MPMQ_STOPPING;
-        return 1;
-    }
-
-#if APR_USE_SYSVSEM_SERIALIZE
-    if (ap_accept_lock_mech == APR_LOCK_DEFAULT || 
-        ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#else
-    if (ap_accept_lock_mech == APR_LOCK_SYSVSEM) {
-#endif
-        rv = unixd_set_proc_mutex_perms(accept_mutex);
-        if (rv != APR_SUCCESS) {
-            ap_log_error(APLOG_MARK, APLOG_EMERG, rv, s,
-                         "Couldn't set permissions on cross-process lock; "
-                         "check User and Group directives");
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-    }
-
-    if (!is_graceful) {
-        if (ap_run_pre_mpm(s->process->pool, SB_SHARED) != OK) {
-            mpm_state = AP_MPMQ_STOPPING;
-            return 1;
-        }
-        /* fix the generation number in the global score; we just got a new,
-         * cleared scoreboard
-         */
-        ap_scoreboard_image->global->running_generation = ap_my_generation;
-    }
-
-    set_signals();
-    /* Don't thrash... */
-    if (max_spare_threads < min_spare_threads + ap_threads_per_child)
-        max_spare_threads = min_spare_threads + ap_threads_per_child;
-
-    /* If we're doing a graceful_restart then we're going to see a lot
-     * of children exiting immediately when we get into the main loop
-     * below (because we just sent them AP_SIG_GRACEFUL).  This happens pretty
-     * rapidly... and for each one that exits we'll start a new one until
-     * we reach at least daemons_min_free.  But we may be permitted to
-     * start more than that, so we'll just keep track of how many we're
-     * supposed to start up without the 1 second penalty between each fork.
-     */
-    remaining_children_to_start = ap_daemons_to_start;
-    if (remaining_children_to_start > ap_daemons_limit) {
-        remaining_children_to_start = ap_daemons_limit;
-    }
-    if (!is_graceful) {
-        startup_children(remaining_children_to_start);
-        remaining_children_to_start = 0;
-    }
-    else {
-        /* give the system some time to recover before kicking into
-            * exponential mode */
-        hold_off_on_exponential_spawning = 10;
-    }
-
-    ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                "%s configured -- resuming normal operations",
-                ap_get_server_version());
-    ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf,
-                "Server built: %s", ap_get_server_built());
-#ifdef AP_MPM_WANT_SET_ACCEPT_LOCK_MECH
-    ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf,
-		"AcceptMutex: %s (default: %s)",
-		apr_proc_mutex_name(accept_mutex),
-		apr_proc_mutex_defname());
-#endif
-    restart_pending = shutdown_pending = 0;
-    mpm_state = AP_MPMQ_RUNNING;
-
-    server_main_loop(remaining_children_to_start);
-    mpm_state = AP_MPMQ_STOPPING;
-
-    if (shutdown_pending) {
-        /* Time to gracefully shut down:
-         * Kill child processes, tell them to call child_exit, etc...
-         * (By "gracefully" we don't mean graceful in the same sense as 
-         * "apachectl graceful" where we allow old connections to finish.)
-         */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, FALSE);
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-
-        if (!child_fatal) {
-            /* cleanup pid file on normal shutdown */
-            const char *pidfile = NULL;
-            pidfile = ap_server_root_relative (pconf, ap_pid_fname);
-            if ( pidfile != NULL && unlink(pidfile) == 0)
-                ap_log_error(APLOG_MARK, APLOG_INFO, 0,
-                             ap_server_conf,
-                             "removed PID file %s (pid=%ld)",
-                             pidfile, (long)getpid());
-    
-            ap_log_error(APLOG_MARK, APLOG_NOTICE, 0,
-                         ap_server_conf, "caught SIGTERM, shutting down");
-        }
-        return 1;
-    }
-
-    /* we've been told to restart */
-    apr_signal(SIGHUP, SIG_IGN);
-
-    if (one_process) {
-        /* not worth thinking about */
-        return 1;
-    }
-
-    /* advance to the next generation */
-    /* XXX: we really need to make sure this new generation number isn't in
-     * use by any of the children.
-     */
-    ++ap_my_generation;
-    ap_scoreboard_image->global->running_generation = ap_my_generation;
-    
-    if (is_graceful) {
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                     AP_SIG_GRACEFUL_STRING " received.  Doing graceful restart");
-        /* wake up the children...time to die.  But we'll have more soon */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, TRUE);
-    
-
-        /* This is mostly for debugging... so that we know what is still
-         * gracefully dealing with existing request.
-         */
-        
-    }
-    else {
-        /* Kill 'em all.  Since the child acts the same on the parents SIGTERM 
-         * and a SIGHUP, we may as well use the same signal, because some user
-         * pthreads are stealing signals from us left and right.
-         */
-        ap_mpm_pod_killpg(pod, ap_daemons_limit, FALSE);
-
-        ap_reclaim_child_processes(1);                /* Start with SIGTERM */
-        ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf,
-                    "SIGHUP received.  Attempting to restart");
-    }
-
-    return 0;
-}
-
-/* This really should be a post_config hook, but the error log is already
- * redirected by that point, so we need to do this in the open_logs phase.
- */
-static int worker_open_logs(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s)
-{
-    apr_status_t rv;
-    ap_listen_rec *lr;
-
-    pconf = p;
-    ap_server_conf = s;
-
-    if ((num_listensocks = ap_setup_listeners(ap_server_conf)) < 1) {
-        ap_log_error(APLOG_MARK, APLOG_ALERT|APLOG_STARTUP, 0,
-                     NULL, "no listening sockets available, shutting down");
-        return DONE;
-    }
-
-#if APR_O_NONBLOCK_INHERITED
-    for(lr = ap_listeners ; lr != NULL ; lr = lr->next) {
-        apr_socket_opt_set(lr->sd, APR_SO_NONBLOCK, 1);
-    }
-#endif /* APR_O_NONBLOCK_INHERITED */
-
-    if (!one_process) {
-        if ((rv = ap_mpm_pod_open(pconf, &pod))) {
-            ap_log_error(APLOG_MARK, APLOG_CRIT|APLOG_STARTUP, rv, NULL,
-                    "Could not open pipe-of-death.");
-            return DONE;
-        }
-    }
-    return OK;
-}
-
-static int worker_pre_config(apr_pool_t *pconf, apr_pool_t *plog, 
-                             apr_pool_t *ptemp)
-{
-    static int restart_num = 0;
-    int no_detach, debug, foreground;
-    ap_directive_t *pdir;
-    ap_directive_t *max_clients = NULL;
-    apr_status_t rv;
-
-    mpm_state = AP_MPMQ_STARTING;
-    
-    /* make sure that "ThreadsPerChild" gets set before "MaxClients" */
-    for (pdir = ap_conftree; pdir != NULL; pdir = pdir->next) {
-        if (strncasecmp(pdir->directive, "ThreadsPerChild", 15) == 0) {
-            if (!max_clients) {
-                break; /* we're in the clear, got ThreadsPerChild first */
-            }
-            else {
-                /* now to swap the data */
-                ap_directive_t temp;
-
-                temp.directive = pdir->directive;
-                temp.args = pdir->args;
-                /* Make sure you don't change 'next', or you may get loops! */
-                /* XXX: first_child, parent, and data can never be set
-                 * for these directives, right? -aaron */
-                temp.filename = pdir->filename;
-                temp.line_num = pdir->line_num;
-
-                pdir->directive = max_clients->directive;
-                pdir->args = max_clients->args;
-                pdir->filename = max_clients->filename;
-                pdir->line_num = max_clients->line_num;
-                
-                max_clients->directive = temp.directive;
-                max_clients->args = temp.args;
-                max_clients->filename = temp.filename;
-                max_clients->line_num = temp.line_num;
-                break;
-            }
-        }
-        else if (!max_clients
-                 && strncasecmp(pdir->directive, "MaxClients", 10) == 0) {
-            max_clients = pdir;
-        }
-    }
-
-    debug = ap_exists_config_define("DEBUG");
-
-    if (debug) {
-        foreground = one_process = 1;
-        no_detach = 0;
-    }
-    else {
-        one_process = ap_exists_config_define("ONE_PROCESS");
-        no_detach = ap_exists_config_define("NO_DETACH");
-        foreground = ap_exists_config_define("FOREGROUND");
-    }
-
-    /* sigh, want this only the second time around */
-    if (restart_num++ == 1) {
-        is_graceful = 0;
-
-        if (!one_process && !foreground) {
-            rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND
-                                           : APR_PROC_DETACH_DAEMONIZE);
-            if (rv != APR_SUCCESS) {
-                ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL,
-                             "apr_proc_detach failed");
-                return HTTP_INTERNAL_SERVER_ERROR;
-            }
-        }
-        parent_pid = ap_my_pid = getpid();
-    }
-
-    unixd_pre_config(ptemp);
-    ap_listen_pre_config();
-    ap_daemons_to_start = DEFAULT_START_DAEMON;
-    min_spare_threads = DEFAULT_MIN_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    max_spare_threads = DEFAULT_MAX_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD;
-    ap_daemons_limit = server_limit;
-    ap_threads_per_child = DEFAULT_THREADS_PER_CHILD;
-    ap_pid_fname = DEFAULT_PIDLOG;
-    ap_lock_fname = DEFAULT_LOCKFILE;
-    ap_max_requests_per_child = DEFAULT_MAX_REQUESTS_PER_CHILD;
-    ap_extended_status = 0;
-#ifdef AP_MPM_WANT_SET_MAX_MEM_FREE
-	ap_max_mem_free = APR_ALLOCATOR_MAX_FREE_UNLIMITED;
-#endif
-
-    apr_cpystrn(ap_coredump_dir, ap_server_root, sizeof(ap_coredump_dir));
-
-    return OK;
-}
-
-static void threadpool_hooks(apr_pool_t *p)
-{
-    /* The worker open_logs phase must run before the core's, or stderr
-     * will be redirected to a file, and the messages won't print to the
-     * console.
-     */
-    static const char *const aszSucc[] = {"core.c", NULL};
-    one_process = 0;
-
-    ap_hook_open_logs(worker_open_logs, NULL, aszSucc, APR_HOOK_MIDDLE);
-    /* we need to set the MPM state before other pre-config hooks use MPM query
-     * to retrieve it, so register as REALLY_FIRST
-     */
-    ap_hook_pre_config(worker_pre_config, NULL, NULL, APR_HOOK_REALLY_FIRST);
-}
-
-static const char *set_daemons_to_start(cmd_parms *cmd, void *dummy,
-                                        const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_daemons_to_start = atoi(arg);
-    return NULL;
-}
-
-static const char *set_min_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    min_spare_threads = atoi(arg);
-    if (min_spare_threads <= 0) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: detected MinSpareThreads set to non-positive.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Resetting to 1 to avoid almost certain Apache failure.");
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "Please read the documentation.");
-       min_spare_threads = 1;
-    }
-       
-    return NULL;
-}
-
-static const char *set_max_spare_threads(cmd_parms *cmd, void *dummy,
-                                         const char *arg)
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    max_spare_threads = atoi(arg);
-    return NULL;
-}
-
-static const char *set_max_clients (cmd_parms *cmd, void *dummy,
-                                     const char *arg) 
-{
-    int max_clients;
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    /* It is ok to use ap_threads_per_child here because we are
-     * sure that it gets set before MaxClients in the pre_config stage. */
-    max_clients = atoi(arg);
-    if (max_clients < ap_threads_per_child) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) must be at least as large",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " large as ThreadsPerChild (%d). Automatically",
-                    ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " increasing MaxClients to %d.",
-                    ap_threads_per_child);
-       max_clients = ap_threads_per_child;
-    }
-    ap_daemons_limit = max_clients / ap_threads_per_child;
-    if ((max_clients > 0) && (max_clients % ap_threads_per_child)) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients (%d) is not an integer multiple",
-                    max_clients);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " of ThreadsPerChild (%d), lowering MaxClients to %d",
-                    ap_threads_per_child,
-                    ap_daemons_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " for a maximum of %d child processes,",
-                    ap_daemons_limit);
-       max_clients = ap_daemons_limit * ap_threads_per_child; 
-    }
-    if (ap_daemons_limit > server_limit) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: MaxClients of %d would require %d servers,",
-                    max_clients, ap_daemons_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " and would exceed the ServerLimit value of %d.",
-                    server_limit);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " Automatically lowering MaxClients to %d.  To increase,",
-                    server_limit * ap_threads_per_child);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " please see the ServerLimit directive.");
-       ap_daemons_limit = server_limit;
-    } 
-    else if (ap_daemons_limit < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require MaxClients > 0, setting to 1");
-        ap_daemons_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_threads_per_child (cmd_parms *cmd, void *dummy,
-                                          const char *arg) 
-{
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    ap_threads_per_child = atoi(arg);
-    if (ap_threads_per_child > thread_limit) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: ThreadsPerChild of %d exceeds ThreadLimit "
-                     "value of %d", ap_threads_per_child,
-                     thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "threads, lowering ThreadsPerChild to %d. To increase, please"
-                     " see the", thread_limit);
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     " ThreadLimit directive.");
-        ap_threads_per_child = thread_limit;
-    }
-    else if (ap_threads_per_child < 1) {
-        ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadsPerChild > 0, setting to 1");
-        ap_threads_per_child = 1;
-    }
-    return NULL;
-}
-
-static const char *set_server_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_server_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_server_limit = atoi(arg);
-    /* you cannot change ServerLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_server_limit &&
-        tmp_server_limit != server_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    server_limit = tmp_server_limit;
-    
-    if (server_limit > MAX_SERVER_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ServerLimit of %d exceeds compile time limit "
-                    "of %d servers,", server_limit, MAX_SERVER_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ServerLimit to %d.", MAX_SERVER_LIMIT);
-       server_limit = MAX_SERVER_LIMIT;
-    } 
-    else if (server_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ServerLimit > 0, setting to 1");
-	server_limit = 1;
-    }
-    return NULL;
-}
-
-static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) 
-{
-    int tmp_thread_limit;
-    
-    const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
-    if (err != NULL) {
-        return err;
-    }
-
-    tmp_thread_limit = atoi(arg);
-    /* you cannot change ThreadLimit across a restart; ignore
-     * any such attempts
-     */
-    if (first_thread_limit &&
-        tmp_thread_limit != thread_limit) {
-        /* how do we log a message?  the error log is a bit bucket at this
-         * point; we'll just have to set a flag so that ap_mpm_run()
-         * logs a warning later
-         */
-        changed_limit_at_restart = 1;
-        return NULL;
-    }
-    thread_limit = tmp_thread_limit;
-    
-    if (thread_limit > MAX_THREAD_LIMIT) {
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    "WARNING: ThreadLimit of %d exceeds compile time limit "
-                    "of %d servers,", thread_limit, MAX_THREAD_LIMIT);
-       ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                    " lowering ThreadLimit to %d.", MAX_THREAD_LIMIT);
-       thread_limit = MAX_THREAD_LIMIT;
-    } 
-    else if (thread_limit < 1) {
-	ap_log_error(APLOG_MARK, APLOG_STARTUP, 0, NULL, 
-                     "WARNING: Require ThreadLimit > 0, setting to 1");
-	thread_limit = 1;
-    }
-    return NULL;
-}
-
-static const command_rec threadpool_cmds[] = {
-UNIX_DAEMON_COMMANDS,
-LISTEN_COMMANDS,
-AP_INIT_TAKE1("StartServers", set_daemons_to_start, NULL, RSRC_CONF,
-  "Number of child processes launched at server startup"),
-AP_INIT_TAKE1("MinSpareThreads", set_min_spare_threads, NULL, RSRC_CONF,
-  "Minimum number of idle children, to handle request spikes"),
-AP_INIT_TAKE1("MaxSpareThreads", set_max_spare_threads, NULL, RSRC_CONF,
-  "Maximum number of idle children"),
-AP_INIT_TAKE1("MaxClients", set_max_clients, NULL, RSRC_CONF,
-  "Maximum number of children alive at the same time"),
-AP_INIT_TAKE1("ThreadsPerChild", set_threads_per_child, NULL, RSRC_CONF,
-  "Number of threads each child creates"),
-AP_INIT_TAKE1("ServerLimit", set_server_limit, NULL, RSRC_CONF,
-  "Maximum value of MaxClients for this run of Apache"),
-AP_INIT_TAKE1("ThreadLimit", set_thread_limit, NULL, RSRC_CONF,
-  "Maximum worker threads in a server for this run of Apache"),
-{ NULL }
-};
-
-module AP_MODULE_DECLARE_DATA mpm_threadpool_module = {
-    MPM20_MODULE_STUFF,
-    ap_mpm_rewrite_args,        /* hook to run before apache parses args */
-    NULL,                       /* create per-directory config structure */
-    NULL,                       /* merge per-directory config structures */
-    NULL,                       /* create per-server config structure */
-    NULL,                       /* merge per-server config structures */
-    threadpool_cmds,            /* command apr_table_t */
-    threadpool_hooks            /* register_hooks */
-};
-