delete app

Change-Id: Id4c572809969ebe89e946e88063eaed262cff3f2
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 0 insertions, 246 deletions

diff --git a/rubbos/app/httpd-2.0.64/docs/conf/ssl-std.conf.in b/rubbos/app/httpd-2.0.64/docs/conf/ssl-std.conf.in
deleted file mode 100644
index 978d2bd4..00000000
--- a/rubbos/app/httpd-2.0.64/docs/conf/ssl-std.conf.in
+++ /dev/null
@@ -1,246 +0,0 @@
-#
-# This is the Apache server configuration file providing SSL support.
-# It contains the configuration directives to instruct the server how to
-# serve pages over an https connection. For detailing information about these 
-# directives see <URL:http://httpd.apache.org/docs/2.0/mod/mod_ssl.html>
-# 
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-
-#
-# Pseudo Random Number Generator (PRNG):
-# Configure one or more sources to seed the PRNG of the SSL library.
-# The seed data should be of good random quality.
-# WARNING! On some platforms /dev/random blocks if not enough entropy
-# is available. This means you then cannot use the /dev/random device
-# because it would lead to very long connection times (as long as
-# it requires to make more entropy available). But usually those
-# platforms additionally provide a /dev/urandom device which doesn't
-# block. So, if available, use this one instead. Read the mod_ssl User
-# Manual for more details.
-#
-# Note: This must come before the <IfDefine SSL> container to support
-#       starting without SSL on platforms with no /dev/random equivalent
-#       but a statically compiled-in mod_ssl.
-#
-SSLRandomSeed startup builtin
-SSLRandomSeed connect builtin
-#SSLRandomSeed startup file:/dev/random  512
-#SSLRandomSeed startup file:/dev/urandom 512
-#SSLRandomSeed connect file:/dev/random  512
-#SSLRandomSeed connect file:/dev/urandom 512
-
-<IfDefine SSL>
-
-#
-# When we also provide SSL we have to listen to the 
-# standard HTTP port (see above) and to the HTTPS port
-#
-# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
-#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
-#
-Listen 443
-
-##
-##  SSL Global Context
-##
-##  All SSL configuration in this context applies both to
-##  the main server and all SSL-enabled virtual hosts.
-##
-
-#
-#   Some MIME-types for downloading Certificates and CRLs
-#
-AddType application/x-x509-ca-cert .crt
-AddType application/x-pkcs7-crl    .crl
-
-#   Pass Phrase Dialog:
-#   Configure the pass phrase gathering process.
-#   The filtering dialog program (`builtin' is a internal
-#   terminal dialog) has to provide the pass phrase on stdout.
-SSLPassPhraseDialog  builtin
-
-#   Inter-Process Session Cache:
-#   Configure the SSL Session Cache: First the mechanism 
-#   to use and second the expiring timeout (in seconds).
-#SSLSessionCache        none
-#SSLSessionCache        shmht:@exp_runtimedir@/ssl_scache(512000)
-#SSLSessionCache        shmcb:@exp_runtimedir@/ssl_scache(512000)
-SSLSessionCache         dbm:@exp_runtimedir@/ssl_scache
-SSLSessionCacheTimeout  300
-
-#   Semaphore:
-#   Configure the path to the mutual exclusion semaphore the
-#   SSL engine uses internally for inter-process synchronization. 
-SSLMutex  file:@exp_runtimedir@/ssl_mutex
-
-##
-## SSL Virtual Host Context
-##
-
-<VirtualHost _default_:443>
-
-#   General setup for the virtual host
-DocumentRoot "@exp_htdocsdir@"
-ServerName www.example.com:443
-ServerAdmin you@example.com
-ErrorLog @exp_logfiledir@/error_log
-TransferLog @exp_logfiledir@/access_log
-
-#   SSL Engine Switch:
-#   Enable/Disable SSL for this virtual host.
-SSLEngine on
-
-#   SSL Cipher Suite:
-#   List the ciphers that the client is permitted to negotiate.
-#   See the mod_ssl documentation for a complete list.
-SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
-
-#   Server Certificate:
-#   Point SSLCertificateFile at a PEM encoded certificate.  If
-#   the certificate is encrypted, then you will be prompted for a
-#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
-#   in mind that if you have both an RSA and a DSA certificate you
-#   can configure both in parallel (to also allow the use of DSA
-#   ciphers, etc.)
-SSLCertificateFile @exp_sysconfdir@/ssl.crt/server.crt
-#SSLCertificateFile @exp_sysconfdir@/ssl.crt/server-dsa.crt
-
-#   Server Private Key:
-#   If the key is not combined with the certificate, use this
-#   directive to point at the key file.  Keep in mind that if
-#   you've both a RSA and a DSA private key you can configure
-#   both in parallel (to also allow the use of DSA ciphers, etc.)
-SSLCertificateKeyFile @exp_sysconfdir@/ssl.key/server.key
-#SSLCertificateKeyFile @exp_sysconfdir@/ssl.key/server-dsa.key
-
-#   Server Certificate Chain:
-#   Point SSLCertificateChainFile at a file containing the
-#   concatenation of PEM encoded CA certificates which form the
-#   certificate chain for the server certificate. Alternatively
-#   the referenced file can be the same as SSLCertificateFile
-#   when the CA certificates are directly appended to the server
-#   certificate for convinience.
-#SSLCertificateChainFile @exp_sysconfdir@/ssl.crt/ca.crt
-
-#   Certificate Authority (CA):
-#   Set the CA certificate verification path where to find CA
-#   certificates for client authentication or alternatively one
-#   huge file containing all of them (file must be PEM encoded)
-#   Note: Inside SSLCACertificatePath you need hash symlinks
-#         to point to the certificate files. Use the provided
-#         Makefile to update the hash symlinks after changes.
-#SSLCACertificatePath @exp_sysconfdir@/ssl.crt
-#SSLCACertificateFile @exp_sysconfdir@/ssl.crt/ca-bundle.crt
-
-#   Certificate Revocation Lists (CRL):
-#   Set the CA revocation path where to find CA CRLs for client
-#   authentication or alternatively one huge file containing all
-#   of them (file must be PEM encoded)
-#   Note: Inside SSLCARevocationPath you need hash symlinks
-#         to point to the certificate files. Use the provided
-#         Makefile to update the hash symlinks after changes.
-#SSLCARevocationPath @exp_sysconfdir@/ssl.crl
-#SSLCARevocationFile @exp_sysconfdir@/ssl.crl/ca-bundle.crl
-
-#   Client Authentication (Type):
-#   Client certificate verification type and depth.  Types are
-#   none, optional, require and optional_no_ca.  Depth is a
-#   number which specifies how deeply to verify the certificate
-#   issuer chain before deciding the certificate is not valid.
-#SSLVerifyClient require
-#SSLVerifyDepth  10
-
-#   Access Control:
-#   With SSLRequire you can do per-directory access control based
-#   on arbitrary complex boolean expressions containing server
-#   variable checks and other lookup directives.  The syntax is a
-#   mixture between C and Perl.  See the mod_ssl documentation
-#   for more details.
-#<Location />
-#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
-#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
-#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
-#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
-#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
-#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
-#</Location>
-
-#   SSL Engine Options:
-#   Set various options for the SSL engine.
-#   o FakeBasicAuth:
-#     Translate the client X.509 into a Basic Authorisation.  This means that
-#     the standard Auth/DBMAuth methods can be used for access control.  The
-#     user name is the `one line' version of the client's X.509 certificate.
-#     Note that no password is obtained from the user. Every entry in the user
-#     file needs this password: `xxj31ZMTZzkVA'.
-#   o ExportCertData:
-#     This exports two additional environment variables: SSL_CLIENT_CERT and
-#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
-#     server (always existing) and the client (only existing when client
-#     authentication is used). This can be used to import the certificates
-#     into CGI scripts.
-#   o StdEnvVars:
-#     This exports the standard SSL/TLS related `SSL_*' environment variables.
-#     Per default this exportation is switched off for performance reasons,
-#     because the extraction step is an expensive operation and is usually
-#     useless for serving static content. So one usually enables the
-#     exportation for CGI and SSI requests only.
-#   o CompatEnvVars:
-#     This exports obsolete environment variables for backward compatibility
-#     to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
-#     to provide compatibility to existing CGI scripts.
-#   o StrictRequire:
-#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
-#     under a "Satisfy any" situation, i.e. when it applies access is denied
-#     and no other module can change it.
-#   o OptRenegotiate:
-#     This enables optimized SSL connection renegotiation handling when SSL
-#     directives are used in per-directory context. 
-#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
-<FilesMatch "\.(cgi|shtml|phtml|php3?)$">
-    SSLOptions +StdEnvVars
-</FilesMatch>
-<Directory "@exp_cgidir@">
-    SSLOptions +StdEnvVars
-</Directory>
-
-#   SSL Protocol Adjustments:
-#   The safe and default but still SSL/TLS standard compliant shutdown
-#   approach is that mod_ssl sends the close notify alert but doesn't wait for
-#   the close notify alert from client. When you need a different shutdown
-#   approach you can use one of the following variables:
-#   o ssl-unclean-shutdown:
-#     This forces an unclean shutdown when the connection is closed, i.e. no
-#     SSL close notify alert is send or allowed to received.  This violates
-#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
-#     this when you receive I/O errors because of the standard approach where
-#     mod_ssl sends the close notify alert.
-#   o ssl-accurate-shutdown:
-#     This forces an accurate shutdown when the connection is closed, i.e. a
-#     SSL close notify alert is send and mod_ssl waits for the close notify
-#     alert of the client. This is 100% SSL/TLS standard compliant, but in
-#     practice often causes hanging connections with brain-dead browsers. Use
-#     this only for browsers where you know that their SSL implementation
-#     works correctly. 
-#   Notice: Most problems of broken clients are also related to the HTTP
-#   keep-alive facility, so you usually additionally want to disable
-#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
-#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
-#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
-#   "force-response-1.0" for this.
-SetEnvIf User-Agent ".*MSIE.*" \
-         nokeepalive ssl-unclean-shutdown \
-         downgrade-1.0 force-response-1.0
-
-#   Per-Server Logging:
-#   The home of a custom SSL log file. Use this when you want a
-#   compact non-error SSL logfile on a virtual host basis.
-CustomLog @exp_logfiledir@/ssl_request_log \
-          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
-
-</VirtualHost>                                  
-
-</IfDefine>