delete app

Change-Id: Id4c572809969ebe89e946e88063eaed262cff3f2
Signed-off-by: hongbotian <hongbo.tianhongbo@huawei.com>

1 files changed, 0 insertions, 189 deletions

diff --git a/rubbos/app/httpd-2.0.64/buildconf b/rubbos/app/httpd-2.0.64/buildconf
deleted file mode 100755
index 504c885e..00000000
--- a/rubbos/app/httpd-2.0.64/buildconf
+++ /dev/null
@@ -1,189 +0,0 @@
-#!/bin/sh
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-# buildconf: Build the support scripts needed to compile from a
-#            checked-out version of the source code.
-
-# set a couple of defaults for where we should be looking for our support libs.
-# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
-
-apr_src_dir=srclib/apr
-apu_src_dir=srclib/apr-util
-
-while test $# -gt 0 
-do
-  # Normalize
-  case "$1" in
-  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  case "$1" in
-  --with-apr=*)
-  apr_src_dir=$optarg
-  ;;
-  esac
-
-  case "$1" in
-  --with-apr-util=*)
-  apu_src_dir=$optarg
-  ;;
-  esac
-
-  shift
-done
-
-#
-# Check to be sure that we have the srclib dependencies checked-out
-#
-
-should_exit=0
-
-if [ ! -f "$apr_src_dir/build/apr_common.m4" ]; then
-    echo ""
-    echo "You don't have a copy of the apr source in $apr_src_dir. " 
-    echo "Please get the source using the following instructions," 
-    echo "or specify the location of the source with " 
-    echo "--with-apr=[path to apr] :"
-    echo ""
-    echo "   cd srclib"
-    echo "   svn co https://svn.apache.org/repos/asf/apr/apr/branches/0.9.x apr"
-    echo "" 
-    should_exit=1
-fi
-
-if [ ! -f "$apu_src_dir/Makefile.in" ]; then
-    echo ""
-    echo "You don't have a copy of the apr-util source in $apu_src_dir. "
-    echo "Please get one the source using the following instructions, "
-    echo "or specify the location of the source with "
-    echo "--with-apr-util=[path to apr-util]:"
-    echo ""
-    echo "   cd srclib"
-    echo "   svn co https://svn.apache.org/repos/asf/apr/apr-util/branches/0.9.x apr-util"
-    echo ""
-    should_exit=1
-fi
-
-if [ $should_exit -gt 0 ]; then
-    exit 1
-fi
-
-# These are temporary until Roy finishes the other build changes
-#
-touch .deps
-rm -f aclocal.m4
-rm -f generated_lists
-
-# Remove autoconf 2.5x's cache directory
-rm -rf autom4te*.cache
-
-case "`uname`" in
-*BSD/OS*)
-    ./build/bsd_makefile;;
-esac
-#
-# end temporary stuff
-
-apr_configure="$apr_src_dir/configure"
-aprutil_configure="$apu_src_dir/configure"
-pcre_configure="srclib/pcre/configure"
-config_h_in="include/ap_config_auto.h.in"
-
-cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
-
-if [ "$apr_src_dir" = "srclib/apr" ]; then
-    echo rebuilding $apr_configure
-    (cd srclib/apr && ./buildconf) || {
-        echo "./buildconf failed for apr"
-        exit 1
-    }
-    rm -f srclib/apr/apr.spec
-fi
-
-apr_src_dir=`cd $apr_src_dir && pwd` 
-
-if [ "$apu_src_dir" = "srclib/apr-util" ]; then
-    echo rebuilding $aprutil_configure
-    (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
-        echo "./buildconf failed for apr-util" 
-        exit 1
-    }
-    rm -f srclib/apr-util/apr-util.spec
-fi
-
-apu_src_dir=`cd $apu_src_dir && pwd` 
-
-echo copying build files
-cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
-   $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
-   $apr_src_dir/build/find_apr.m4 $apu_src_dir/build/find_apu.m4 build
-
-# Remove any libtool files so one can switch between libtool 1.3
-# and libtool 1.4 by simply rerunning the buildconf script.
-(cd build ; rm -f ltconfig ltmain.sh)
-
-# Optionally copy libtool-1.3.x files
-if [ -f $apr_src_dir/build/ltconfig ]; then
-    cp $apr_src_dir/build/ltconfig build
-fi
-if [ -f $apr_src_dir/build/ltmain.sh ]; then
-    cp $apr_src_dir/build/ltmain.sh build
-fi
-
-# ensure that the mod_ssl expression parser sources are never regenerated
-# when running make
-echo fixing timestamps for mod_ssl sources
-cd modules/ssl
-touch ssl_expr_parse.y
-sleep 1
-touch ssl_expr_parse.c ssl_expr_parse.h ssl_expr_scan.l
-sleep 1
-touch ssl_expr_scan.c
-cd ../..
-
-echo rebuilding $pcre_configure
-(cd srclib/pcre && ${AUTOCONF:-autoconf})
-
-echo rebuilding $config_h_in
-rm -f $config_h_in
-${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
-
-echo rebuilding configure
-rm -f config.cache
-${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
-
-# Remove autoconf 2.5x's cache directory
-rm -rf autom4te*.cache
-
-echo rebuilding rpm spec file
-( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
-  REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
-  VERSION=`echo $REVISION | cut -d- -s -f1`
-  RELEASE=`echo $REVISION | cut -d- -s -f2`
-  if [ "x$VERSION" = "x" ]; then
-    VERSION=$REVISION
-    RELEASE=1
-  fi
-  cat ./build/rpm/httpd.spec.in | \
-  sed -e "s/APACHE_VERSION/$VERSION/" \
-      -e "s/APACHE_RELEASE/$RELEASE/" \
-      -e "s/APACHE_MMN/$VMMN/" \
-  > httpd.spec )
-
-exit 0