update the Euphrates docs

JIRA: BOTTLENECK-170

This patch is to update the euphrates docs to commandate new
changes.

Change-Id: I766f3e689c9093694e82995f1b0f013f316636ab
Signed-off-by: Yang Yu <Gabriel.yuyang@huawei.com>
(cherry picked from commit 779ae65968952732fda657b35a92b201eb36d4ea)

3 files changed, 87 insertions, 67 deletions

diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst
index 8e959abc..57396da8 100644
--- a/docs/testing/user/userguide/index.rst
+++ b/docs/testing/user/userguide/index.rst
@@ -3,7 +3,7 @@
 .. (c) Huawei Technologies Co.,Ltd and others.
 
 ***************************
-Bottlenecks - Testing Guide
+Bottlenecks User Guide
 ***************************
 
 .. toctree::
diff --git a/docs/testing/user/userguide/overview.rst b/docs/testing/user/userguide/overview.rst
index a9302297..5d76c76c 100644
--- a/docs/testing/user/userguide/overview.rst
+++ b/docs/testing/user/userguide/overview.rst
@@ -2,30 +2,45 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) Huawei Technologies Co.,Ltd and others.
 
-*********************
-Project Testing Guide
-*********************
+**********
+User Guide
+**********
 
 For each *testsuite*, you can either setup *teststory* or *testcase* to run
 certain test. *teststory* comprises several *testcases* as a set in one
 configuration file. You could call *teststory* or *testcase* by using
-Bottlencks user interfaces.
+Bottlenecks user interfaces.
 Details will be shown in the following section.
 
 Brief Introdcution of the Test suites in Project Releases
 =============================================================
 
-Brahmaputra: rubbos is introduced, which is an end2end NFVI perforamnce tool.
-Virtual switch test framework(VSTF) is also introduced,
-which is an test framework used for vswitch performance test.
+Brahmaputra:
 
-Colorado: rubbos is refactored by using puppet, which makes it quite flexible
-to configure with different number of load generator (Client), worker (tomcat).
-vstf is refactored by extracting the test case's configuration information.
+* rubbos is introduced, which is an end2end NFVI perforamnce tool.
+* Virtual switch test framework (VSTF) is also introduced, which is an test framework used for vswitch performance test.
 
-Danube: posca testsuite is introduced to implementing stress (factor), scenario and
-tuning test in parametric manner. Two testcases are developed and integrated into
-community CI pipeline. Rubbos and VSTF are not supported any more.
+Colorado:
+
+* rubbos is refactored by using puppet, and ease the integration with several load generators(Client) and worker(Tomcat).
+* VSTF is refactored by extracting the test case's configuration information.
+
+Danube:
+
+* posca testsuite is introduced to implement stress (factor), feature and tuning test in parametric manner.
+* Two testcases are developed and integrated into community CI pipeline.
+* Rubbos and VSTF are not supported any more.
+
+Euphrates:
+
+* Introduction of a simple monitoring module, i.e., Prometheus+Collectd+Node+Grafana to monitor the system behavior when executing stress tests.
+* Support VNF scale up/out tests to verify NFVI capability to adapt the resource consuming.
+* Extend Life-cycle test to data-plane to validate the system capability to handle concurrent networks usage.
+* Testing framework is revised to support installer-agnostic testing.
+
+These enhancements and test cases help the end users to gain more comprehensive understanding of the SUT.
+Graphic reports of the system behavior additional to test cases are provided to indicate the confidence level of SUT.
+Installer-agnostic testing framework allow end user to do stress testing adaptively over either Open Source or commercial deployments.
 
 Integration Description
 =======================
@@ -38,6 +53,8 @@ Integration Description
 +-------------+----------------------+----------------------+
 | Danube      |    Compass           | POSCA                |
 +-------------+----------------------+----------------------+
+| Euphrates   |    Any               | POSCA                |
++-------------+----------------------+----------------------+
 
 Test suite & Test case Description
 ==================================
@@ -45,32 +62,13 @@ Test suite & Test case Description
 |POSCA   | posca_factor_ping             |
 |        +-------------------------------+
 |        | posca_factor_system_bandwidth |
-+--------+-------------------------------+
-|Rubbos  | rubbos_basic                  |
-|        +-------------------------------+
-|        | rubbos_TC1101                 |
-|        +-------------------------------+
-|        | rubbos_TC1201                 |
 |        +-------------------------------+
-|        | rubbos_TC1301                 |
+|        | posca_facotor_througputs      |
 |        +-------------------------------+
-|        | rubbos_TC1401                 |
+|        | posca_feature_scaleup         |
 |        +-------------------------------+
-|        | rubbos_heavy_TC1101           |
-+--------+-------------------------------+
-|vstf    | vstf_Ti1                      |
-|        +-------------------------------+
-|        | vstf_Ti2                      |
-|        +-------------------------------+
-|        | vstf_Ti3                      |
-|        +-------------------------------+
-|        | vstf_Tn1                      |
-|        +-------------------------------+
-|        | vstf_Tn2                      |
-|        +-------------------------------+
-|        | vstf_Tu1                      |
-|        +-------------------------------+
-|        | vstf_Tu2                      |
-|        +-------------------------------+
-|        | vstf_Tu3                      |
+|        | posca_feature_scaleout        |
 +--------+-------------------------------+
+
+As for the abandoned test suite in the previous Bottlenecks releases, please
+refer to http://docs.opnfv.org/en/stable-danube/submodules/bottlenecks/docs/testing/user/userguide/deprecated.html.
diff --git a/docs/testing/user/userguide/posca_guide.rst b/docs/testing/user/userguide/posca_guide.rst
index ae6c2481..009aedb1 100644
--- a/docs/testing/user/userguide/posca_guide.rst
+++ b/docs/testing/user/userguide/posca_guide.rst
@@ -9,12 +9,12 @@ POSCA Testsuite Guide
 
 POSCA Introduction
 ====================
-The POSCA (Parametric Bottlenecks Testing Catalogue) testsuite
+The POSCA (Parametric Bottlenecks Testing Catalogue) test suite
 classifies the bottlenecks test cases and results into 5 categories.
 Then the results will be analyzed and bottlenecks will be searched
 among these categories.
 
-The POSCA testsuite aims to locate the bottlenecks in parmetric
+The POSCA testsuite aims to locate the bottlenecks in parametric
 manner and to decouple the bottlenecks regarding the deployment
 requirements.
 The POSCA testsuite provides an user friendly way to profile and
@@ -59,10 +59,13 @@ Preinstall Packages
 Run POSCA Locally
 =================
 
-POSCA testsuite is highly automated regarding test environment preparation, installing testing tools, excuting tests and showing the report/analysis.
+The test environment preparation, the installation of the testing tools,
+the execution of the tests and the reporting/analyisis of POSCA test suite
+are highly automated.
 A few steps are needed to run it locally.
 
-It is presumed that a user is using Compass4nfv to deploy OPNFV Danube and the user logins jumper server as root.
+In Euphrates, Bottlenecks has modified its framework to support installer-agnostic
+testing which means that test cases could be executed over different deployments.
 
 
 Downloading Bottlenecks Software
@@ -84,35 +87,59 @@ Preparing Python Virtual Evnironment
     . pre_virt_env.sh
 
 
-Excuting Specified Testcase
+Preparing configuration/description files
+-----------------------------------------
+
+Put OpenStack RC file (admin_rc.sh), os_carcert and pod.yaml (pod descrition file) in /tmp directory.
+Edit admin_rc.sh and add the following line
+
+.. code-block:: bash
+
+    export OS_CACERT=/tmp/os_cacert
+
+If you are using compass, fuel, apex or joid to deploy your openstack
+environment, you could use the following command to get the required files.
+
+.. code-block:: bash
+
+    bash /utils/env_prepare/config_prepare.sh -i <installer> [--debug]
+
+Note that if we execute the command above, then admin_rc.sh and pod.yml gets created automatically in /tmp folder along with the line `export OS_CACERT=/tmp/os_cacert` added in admin_rc.sh file.
+
+
+Executing Specified Testcase
 ---------------------------
 
-Bottlencks provide a CLI interface to run the tests, which is one of the most convenient way since it is more close to our natural languge. An GUI interface with rest API will also be provided in later update.
+1. Bottlenecks provides a CLI interface to run the tests, which is one of the most convenient way since it is more close to our natural languge. An GUI interface with rest API will also be provided in later update.
 
 .. code-block:: bash
 
-    bottlenecks [testcase run <testcase>] [teststory run <teststory>]
+    bottlenecks testcase|teststory run <testname>
 
-For the *testcase* command, testcase name should be as the same name of the test case configuration file located in testsuites/posca/testcase_cfg.
-For stress tests in Danube, *testcase* should be replaced by either *posca_factor_ping* or *posca_factor_system_bandwidth*.
-For the *teststory* command, a user could specified the test cases to be excuted by defined it in a teststory configuration file located in testsuites/posca/testsuite_story. There is also an example there named *posca_factor_test*.
+    For the *testcase* command, testname should be as the same name of the test case configuration file located in testsuites/posca/testcase_cfg.
+    For stress tests in Danube/Euphrates, *testcase* should be replaced by either *posca_factor_ping* or *posca_factor_system_bandwidth*.
+    For the *teststory* command, a user can specify the test cases to be executed by defining it in a teststory configuration file located in testsuites/posca/testsuite_story. There is also an example there named *posca_factor_test*.
 
-There are also other 2 ways to run test cases and test stories.
-The first one is using shell script.
+2. There are also other 2 ways to run test cases and test stories.
+
+    The first one is to use shell script.
 
 .. code-block:: bash
 
-    bash run_tests.sh [-h|--help] [-s <testsuite>] [-c <testcase>]
+    bash run_tests.sh [-h|--help] -s <testsuite>|-c <testcase>
+
 
-The second is using python interpreter.
+    The second is to use python interpreter.
 
 .. code-block:: bash
 
-    docker-compose -f docker/bottleneck-compose/docker-compose.yml up -d
-    docker pull tutum/influxdb:0.13
+    $REPORT=False
+    opts="--privileged=true -id"
+    docker_volume="-v /var/run/docker.sock:/var/run/docker.sock -v /tmp:/tmp"
+    docker run $opts --name bottlenecks-load-master $docker_volume opnfv/bottlenecks:latest /bin/bash
     sleep 5
     POSCA_SCRIPT="/home/opnfv/bottlenecks/testsuites/posca"
-    docker exec bottleneckcompose_bottlenecks_1 python ${POSCA_SCRIPT}/run_posca.py [testcase <testcase>] [teststory <teststory>]
+    docker exec bottlenecks-load-master python ${POSCA_SCRIPT}/../run_posca.py testcase|teststory <testname> ${REPORT}
 
 
 Showing Report
@@ -135,13 +162,6 @@ If you want to clean the dockers that established during the test, you can excut
 
 .. code-block:: bash
 
-    docker-compose -f docker/bottleneck-compose/docker-compose.yml down -d
-    docker ps -a | grep 'influxdb' | awk '{print $1}' | xargs docker rm -f >/dev/stdout
-
-Or you can just run the following command
-
-.. code-block:: bash
-
     bash run_tests.sh --cleanup
 
 Note that you can also add cleanup parameter when you run a test case. Then environment will be automatically cleaned up when
@@ -157,18 +177,20 @@ reported automatically to community MongoDB. There are two ways to report the re
 
 .. code-block:: bash
 
-    bash run_tests.sh [-h|--help] [-s <testsuite>] [-c <testcase>] --report
+    bash run_tests.sh [-h|--help] -s <testsuite>|-c <testcase> --report
 
 2. Report testing result by python interpreter
 
 .. code-block:: bash
 
-    docker-compose -f docker/bottleneck-compose/docker-compose.yml up -d
-    docker pull tutum/influxdb:0.13
+    REPORT=True
+    opts="--privileged=true -id"
+    docker_volume="-v /var/run/docker.sock:/var/run/docker.sock -v /tmp:/tmp"
+    docker run $opts --name bottlenecks-load-master $docker_volume opnfv/bottlenecks:latest /bin/bash
     sleep 5
     REPORT="True"
     POSCA_SCRIPT="/home/opnfv/bottlenecks/testsuites/posca"
-    docker exec bottleneckcompose_bottlenecks_1 python ${POSCA_SCRIPT}/run_posca.py [testcase <testcase>] [teststory <teststory>] REPORT
+    docker exec bottlenecks_load-master python ${POSCA_SCRIPT}/../run_posca.py testcase|teststory <testcase> ${REPORT}
 
 Test Result Description
 =======================