diff options
Diffstat (limited to 'vpn_subscribe.sh')
| -rw-r--r-- | vpn_subscribe.sh | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/vpn_subscribe.sh b/vpn_subscribe.sh new file mode 100644 index 0000000..fc45454 --- /dev/null +++ b/vpn_subscribe.sh @@ -0,0 +1,220 @@ +#!/bin/sh +# test script for vpn subscribing + +L3VPN = 3 + +AUTH = 'admin:admin' +URLTENANT = 'http://127.0.0.1:8091/v1/tenant' +URLCPE = 'http://127.0.0.1:8091/v1/cpe' +URLSTATUS = 'http://127.0.0.1:18002/resmgr/v1/dev?dev_id=' +URLINTERFACE = 'http://127.0.0.1:8091/v1/cpe/interface' +URLSERVICE = 'http://127.0.0.1:8091/v1/vpn' + +tenantid = 'opnfv' +tenantname = 'opnfv' + +esn1 = '21500102003GH5000971' +interface1 = 'GigabitEthernet0/0/3' +vlan1 = 3006 +subnet1 = '172.168.2.0' +mask2 = 24 +gateway1 = '10.10.2.2' + +esn2 = '2102114469P0H3000011' +interface2 = '10GE6/0/16' +vlan2 = 3000 +subnet2 = '172.168.1.0' +mask2 = 24 +gateway2 = '10.10.1.2' + +function createtenant { + + result = curl -I -H 'Content-type:application/json' -X POST -d '{ "tenant_id": $1, + "tenant_name":$2, "cert_type": "A", "cert_num": "000000000000000000001"}' -u $AUTH $URLTENANT + echo 'tenant $1 is being created!' + return result + +} + +function enablecpe { + + cpe_model = "4096" + if [ $3 -eq "IMG"]; then + cpe_model = "4098" + fi + if [ $3 -eq "UCPE"]; then + cpe_model = "4096" + fi + + result = curl -I -H 'Content-type:application/json' -X POST -d ' { "cpe_vendor": "HUAWEI", "tenant_id": $2, "ctrler_id": "HW_AC_CAMPUS_CQ1", "access_type": 0, "cpe_model": $cpe_moel, "cpe_esn": $1 }' -u $URLCPE + echo 'cpe $1 is being activated!' + return result + +} + +function checkstatus { + + URL = {$URLSTATUS}{$1} + + result = curl -I -H "Content-type: application/json" -X GET -u $AUTH $URL + status = jq '.status' $result + return status + +} + +function cfglaninterface { + + result = curl -I -H 'Content-type:application/json' -X POST -d '{ "cpe_esn": $1, "interfaces": [ { "if_name": $2, "if_vlan": $3, "if_ip":$4, "if_mask":"24"}] }' -u $URLINTERFACE + echo 'cpe $1 interface $2 vlan $3 is being configured!' + return result + +} + +function enablesite2site { + + result = curl -I -H 'Content-type:application/json' -X POST -d '{ + "tenant_id": $1, + "bandwidth": 51200, + "order_id": "20180116-16", + "operation": 1, + "order_name": "20180116-16", + "internet_cfg": null, + "vas_cfg": null, + "vpn_config": [ + { + "tenant_id": $1, + "vpn_id": 1, + "vpn_type": $L3VPN, + "local_device": $2, + "dl_bw": 1000, + "ul_bw": 1000, + "route_policy": false, + "qos_grade": null, + "local_type": 0, + "local_access": { + "web_enable": 1, + "dhcp_server": 1, + "portvlan_list": [ + + { + "port": $3, + "vlan": $4 + } + ], + "subnet_list": [ + { + "ipv4": $5, + "mask_bit": "24", + "gateway": "$6 + } + ] + }, + "remote_device": $7, + "remote_type": 0, + "remote_access": { + "dhcp_server": 1, + "web_enable": 1, + "portvlan_list": [ + + { + "port": $8, + "vlan": $9 + } + ], + "subnet_list": [ + + { + "ipv4": $10, + "mask_bit": 24, + "gateway": $11 + } + ] + } + } + ] +}' -u $URLSERVICE + echo 'site2site between cpe $2 and cpe $3 is being activated for tenant $1!' + return result + +} + +tenantresult = createtenant $tenantid $tenantname +if [ $tenantresult -eq 201 ]; then + + echo 'tenant opnfv has been successfully created!' + + ucperesult = enablecpe $esn1 $tenantid "UCPE" + if [ $ucperesult -eq 201 ]; then + echo 'cpe $esn1 has been successfully enabled!' + elif [ $cpe1result -eq 404 ]; then + echo 'tenant $tenantid not exits!' + elif [ $cpe1result -eq 409 ]; then + echo 'cpe $esn1 already exists!' + else + echo 'illegal result!' + + imgresult = enablecpe $esn2 $tenantid "IMG" + if [ $imgresult -eq 201 ]; then + echo 'cpe $esn2 has been successfully enabled!' + elif [ $cpe2result -eq 404 ]; then + echo 'tenant $tenantid not exits!' + elif [ $cpe2result -eq 409 ]; then + echo 'cpe $esn2 already exists!' + else + echo 'illegal result!' + + while true + do + sleep 30 + ucpestatus = checkstatus $esn1 + imgstatus = checkstatus $esn2 + if [ $ucpestatus -eq "Active" ] && [ $imgstatus -eq "Active"]; then + echo 'ucpe and img are both ready for service!' + break + fi + done + + + ucpeinterfaceresult = cfglaninterface $esn1 $interface1 $vlan1 $ip1 + if [ $ucpeinterfaceresult -eq 200 ]; then + echo 'cpe $esn1 interface $interface1 has been successfully configured!' + elif [ $ucpeinterfaceresult -eq 404 ]; then + echo 'cpe $esn1 not exits!' + else + echo 'illegal result!' + + imginterfaceresult = cfglaninterface $esn2 $interface2 $vlan2 $ip2 + if [ $imginterfaceresult -eq 200 ]; then + echo 'cpe $esn2 interface $interface2 has been successfully configured!' + elif [ $imginterfaceresult -eq 404 ]; then + echo 'cpe $esn1 not exits!' + else + echo 'illegal result!' + + serviceresult = enablesite2site $tenantid $esn1 $interface1 $vlan1 $subnet1 $gateway1 $esn2 $interface2 $vlan2 $subnet2 $gateway2 + if [ $serviceresult -eq 201 ]; then + echo 'l3vpn has been successfully enabled between cpe $esn1 and cpe $esn2!' + elif [ $serviceresult -eq 404 ]; then + echo 'tenant or cpe not exits!' + elif [ $serviceresult -eq 409 ]; then + echo 'l3vpn already enabled!' + elif [ $serviceresult -eq 500 ]; then + echo $serviceresult + else + echo 'illegal result!' + + +elif [ $result -eq 409 ]; then + echo 'tenant already exists!' +else + echo 'illegal result!' +fi + + + + + + + + + |