vcpe_testscripts

Change-Id: I8f438c65f1d623f2125e1bf073646e5c2172049d
Signed-off-by: zc9211 <zhangchen.bri@chinatelecom.cn>

1 files changed, 220 insertions, 0 deletions

diff --git a/vpn_unsubscribe.sh b/vpn_unsubscribe.sh
new file mode 100644
index 0000000..905a2a3
--- /dev/null
+++ b/vpn_unsubscribe.sh
@@ -0,0 +1,220 @@
+#!/bin/sh
+# test script for vpn subscribing
+
+L3VPN = 3
+
+AUTH = 'admin:admin'
+URLTENANT = 'http://127.0.0.1:8091/v1/tenant'
+URLCPE = 'http://127.0.0.1:8091/v1/cpe'
+URLSTATUS = 'http://127.0.0.1:18002/resmgr/v1/dev?dev_id='
+URLINTERFACE = 'http://127.0.0.1:8091/v1/cpe/interface'
+URLSERVICE = 'http://127.0.0.1:8091/v1/vpn'
+
+tenantid = 'opnfv'
+tenantname = 'opnfv'
+
+esn1 = '21500102003GH5000971'
+interface1 = 'GigabitEthernet0/0/3'
+vlan1 = 3006
+subnet1 = '172.168.2.0'
+mask2 = 24
+gateway1 = '10.10.2.2'
+
+esn2 = '2102114469P0H3000011'
+interface2 = '10GE6/0/16'
+vlan2 = 3000
+subnet2 = '172.168.1.0'
+mask2 = 24
+gateway2 = '10.10.1.2'
+
+function createtenant {
+
+  result = curl -I -H 'Content-type:application/json' -X POST -d '{ "tenant_id": $1,
+    "tenant_name":$2, "cert_type": "A", "cert_num": "000000000000000000001"}' -u $AUTH $URLTENANT
+  echo 'tenant $1 is being created!'
+  return result
+
+}
+
+function enablecpe {
+
+  cpe_model = "4096"
+  if [ $3 -eq "IMG"]; then
+    cpe_model = "4098"
+  fi
+  if [ $3 -eq "UCPE"]; then
+    cpe_model = "4096"
+  fi    
+
+  result = curl -I -H 'Content-type:application/json' -X POST -d ' { "cpe_vendor": "HUAWEI", "tenant_id": $2, "ctrler_id": "HW_AC_CAMPUS_CQ1", "access_type": 0, "cpe_model": $cpe_moel, "cpe_esn": $1 }' -u $URLCPE
+  echo 'cpe $1 is being activated!'
+  return result
+
+}
+
+function checkstatus {
+
+  URL = {$URLSTATUS}{$1}
+
+  result = curl -I -H "Content-type: application/json" -X GET -u $AUTH $URL
+  status = jq '.status' $result
+  return status
+
+}
+
+function cfglaninterface {
+
+  result = curl -I -H 'Content-type:application/json' -X POST -d '{ "cpe_esn": $1, "interfaces": [ { "if_name": $2, "if_vlan": $3, "if_ip":$4, "if_mask":"24"}]  }' -u $URLINTERFACE
+  echo 'cpe $1 interface $2 vlan $3 is being configured!'
+  return result
+
+}
+
+function enablesite2site {
+
+  result = curl -I -H 'Content-type:application/json' -X POST -d '{
+    "tenant_id": $1,
+    "bandwidth": 51200,
+    "order_id": "20180116-16",
+    "operation": 0,
+    "order_name": "20180116-16",
+    "internet_cfg": null,
+    "vas_cfg": null,
+    "vpn_config": [
+        {
+        "tenant_id": $1,
+        "vpn_id": 1,
+        "vpn_type": $L3VPN,
+        "local_device": $2,
+        "dl_bw": 1000,
+        "ul_bw": 1000,
+        "route_policy": false,
+        "qos_grade": null,
+        "local_type": 0,
+        "local_access": {																
+                "web_enable": 1,
+                "dhcp_server": 1,
+                "portvlan_list": [
+                    
+	                {
+	                    "port": $3,
+	                    "vlan": $4
+	                }
+                ],
+                "subnet_list": [
+			            {
+			                "ipv4": $5,
+			                "mask_bit": "24",
+			                "gateway": "$6
+			            }
+                ]
+            },
+        "remote_device": $7,
+        "remote_type": 0,
+        "remote_access": {
+            "dhcp_server": 1,
+            "web_enable": 1,
+            "portvlan_list": [
+               
+	                {
+	                    "port": $8,
+	                    "vlan": $9
+	                }
+            ],
+            "subnet_list": [
+            
+			            {
+			                "ipv4": $10,
+			                "mask_bit": 24,
+			                "gateway": $11
+			            }
+            ]
+        }
+        }
+    ]
+}' -u $URLSERVICE
+  echo 'site2site between cpe $2 and cpe $3  is being activated for tenant $1!'
+  return result
+
+}
+
+tenantresult = createtenant $tenantid $tenantname
+if [ $tenantresult -eq 201 ]; then
+
+  echo 'tenant opnfv has been successfully created!'
+
+  ucperesult = enablecpe $esn1 $tenantid "UCPE"
+  if [ $ucperesult -eq 201 ]; then
+    echo 'cpe $esn1 has been successfully enabled!'
+  elif [ $cpe1result -eq 404 ]; then
+    echo 'tenant $tenantid not exits!'
+  elif [ $cpe1result -eq 409 ]; then
+    echo 'cpe $esn1 already exists!'
+  else
+    echo 'illegal result!'
+
+  imgresult = enablecpe $esn2 $tenantid "IMG"
+  if [ $imgresult -eq 201 ]; then
+    echo 'cpe $esn2 has been successfully enabled!'
+  elif [ $cpe2result -eq 404 ]; then
+    echo 'tenant $tenantid not exits!'
+  elif [ $cpe2result -eq 409 ]; then
+    echo 'cpe $esn2 already exists!'
+  else
+    echo 'illegal result!'
+
+  while true
+  do
+     sleep 30
+     ucpestatus = checkstatus $esn1
+     imgstatus = checkstatus $esn2
+     if [ $ucpestatus -eq "Active" ] && [ $imgstatus -eq "Active"]; then
+       echo 'ucpe and img are both ready for service!'
+       break
+     fi
+  done
+
+
+  ucpeinterfaceresult = cfglaninterface $esn1 $interface1 $vlan1 $ip1
+  if [ $ucpeinterfaceresult -eq 200 ]; then
+    echo 'cpe $esn1 interface $interface1 has been successfully configured!'
+  elif [ $ucpeinterfaceresult -eq 404 ]; then
+    echo 'cpe $esn1 not exits!'
+  else
+    echo 'illegal result!'
+  
+  imginterfaceresult = cfglaninterface $esn2 $interface2 $vlan2 $ip2
+  if [ $imginterfaceresult -eq 200 ]; then
+    echo 'cpe $esn2 interface $interface2 has been successfully configured!'
+  elif [ $imginterfaceresult -eq 404 ]; then 
+    echo 'cpe $esn1 not exits!'
+  else 
+    echo 'illegal result!'
+
+  serviceresult = enablesite2site $tenantid $esn1 $interface1 $vlan1 $subnet1 $gateway1 $esn2 $interface2 $vlan2 $subnet2 $gateway2
+  if [ $serviceresult -eq 201 ]; then
+    echo 'l3vpn has been successfully enabled between cpe $esn1 and cpe $esn2!'
+  elif [ $serviceresult -eq 404 ]; then 
+    echo 'tenant or cpe not exits!'
+  elif [ $serviceresult -eq 409 ]; then
+    echo 'l3vpn already enabled!'
+  elif [ $serviceresult -eq 500 ]; then
+    echo $serviceresult
+  else 
+    echo 'illegal result!'
+
+
+elif [ $result -eq 409 ]; then
+  echo 'tenant already exists!'
+else
+  echo 'illegal result!' 
+fi
+
+
+
+
+
+
+
+
+