path: root/patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch

From: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Date: Fri, 24 Nov 2017 20:28:01 +0100
Subject: [PATCH] Add pre-{install,purge} support for base image

Extend <lib.sh> and its invocation from <ci.deploy.sh> with
support for modifying foundation node VMs base image prior to
using it with:
- additional APT GPG keys;
- additional APT repos;
- packages to pre-install;
- packages to pre-remove;
- (non-configurable) cloud init datasource via NoCloud only,
  so VCP VMs won't wait for metadata service;

While at it, re-use the resulting image as a base for another
round of pre-patching (same operations as above are supported)
to provide a base image for VCP VMs.

Add AArch64-specific configuration based on new mechanisms:
- pre-install linux-image-generic-hwe-16.04-edge (and headers)
  for foundation node and VCP (common) image (also requires new
  repo and its key);
- pre-install cloud-init for VCP image (it should already be
  installed, but script needs non-empty config for VCP to create
  the VCP image and transfer it over to Salt Master);

NOTE: cloud-init is required on VCP VMs for DHCP on 1st iface.

JIRA: FUEL-309

Change-Id: I7dcaf0ffd9c57009133c6d339496ec831ab14375
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
---
 .gitignore                                         |   1 +
 ci/deploy.sh                                       |  23 +++-
 mcp/config/scenario/defaults-aarch64.yaml          |  18 +++
 .../cluster/all-mcp-ocata-common/aarch64/init.yml  |   2 +-
 mcp/scripts/lib.sh                                 | 137 ++++++++++++++++++++-
 mcp/scripts/salt.sh                                |  12 ++
 6 files changed, 185 insertions(+), 8 deletions(-)

diff --git a/.gitignore b/.gitignore
index 4e90f32..38b4440 100644
--- a/.gitignore
+++ b/.gitignore
@@ -13,3 +13,4 @@
 **/mcp/scripts/mcp.rsa*
 **/mcp/scripts/user-data.sh
 **/mcp/scripts/net_mcpcontrol.xml
+**/mcp/scripts/*.img
diff --git a/ci/deploy.sh b/ci/deploy.sh
index b13e18e..427850f 100755
--- a/ci/deploy.sh
+++ b/ci/deploy.sh
@@ -15,6 +15,7 @@
 do_exit () {
     local RC=$?
     clean
+    cleanup_mounts
     if [ ${RC} -eq 0 ]; then
         notify "\n[OK] MCP: Openstack installation finished succesfully!\n\n" 2
     else
@@ -158,6 +159,7 @@ NO_DEPLOY_ENVIRONMENT=${NO_DEPLOY_ENVIRONMENT:-0}
 ERASE_ENV=${ERASE_ENV:-0}

 source "${DEPLOY_DIR}/globals.sh"
+source "${DEPLOY_DIR}/lib.sh"

 #
 # END of variables to customize
@@ -340,7 +342,6 @@ fi

 # Get required infra deployment data
 set +x
-source lib.sh
 eval "$(parse_yaml "${SCENARIO_DIR}/defaults-$(uname -i).yaml")"
 eval "$(parse_yaml "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml")"
 eval "$(parse_yaml "${LOCAL_PDF_RECLASS}")"
@@ -358,6 +359,23 @@ for node in "${virtual_nodes[@]}"; do
 done
 virtual_nodes_data=${virtual_nodes_data%|}

+# Serialize repos, packages to (pre-)install/remove for:
+# - foundation node VM base image (virtual: all VMs, baremetal: cfg01|mas01)
+# - virtualized control plane VM base image (only when VCP is used)
+base_image_flavors=common
+if [[ "${cluster_states[*]}" =~ virtual_control ]]; then
+  base_image_flavors+=" control"
+fi
+for sc in ${base_image_flavors}; do
+  for va in apt_keys apt_repos pkg_install pkg_remove; do
+    key=virtual_${sc}_${va}
+    eval "${key}=\${${key}[@]// /|}"
+    eval "${key}=\${${key}// /,}"
+    virtual_repos_pkgs+="${!key}^"
+  done
+done
+virtual_repos_pkgs=${virtual_repos_pkgs%^}
+
 # Expand reclass and virsh network templates
 for tp in "${RECLASS_CLUSTER_DIR}/all-mcp-ocata-common/opnfv/"*.template \
     net_*.template; do
@@ -413,7 +431,8 @@ elif [ ${USE_EXISTING_INFRA} -gt 0 ]; then
     check_connection
 else
     generate_ssh_key
-    prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_nodes[@]}"
+    prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_repos_pkgs}" \
+      "${virtual_nodes[@]}"
     create_networks "${OPNFV_BRIDGES[@]}"
     create_vms "${STORAGE_DIR}" "${virtual_nodes_data}" "${OPNFV_BRIDGES[@]}"
     update_mcpcontrol_network
diff --git a/mcp/config/scenario/defaults-aarch64.yaml b/mcp/config/scenario/defaults-aarch64.yaml
index 24a4037..d989819 100644
--- a/mcp/config/scenario/defaults-aarch64.yaml
+++ b/mcp/config/scenario/defaults-aarch64.yaml
@@ -11,3 +11,21 @@ virtual:
   default:
     vcpus: 6
     ram: 4096
+  common:
+    apt:
+      keys:
+        - https://linux.enea.com/mcp-repos/ocata/xenial/archive-mcpocata.key
+      repos:
+        # <repo name> <repo prio> deb [arch=<arch>] <repo url> <repo dist> <repo comp>
+        - armband_openstack 1100 deb [arch=arm64] http://linux.enea.com/mcp-repos/ocata/xenial ocata main
+        - armband_mk_openstack 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly ocata
+        # NOTE(armband): Empty repo, keep commented out as reference
+        # - armband_mcp_extra 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly extra
+    pkg:
+      install:
+        - linux-image-generic-hwe-16.04-edge
+        - linux-headers-generic-hwe-16.04-edge
+  control:
+    pkg:
+      install:
+        - cloud-init
diff --git a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml
index b5b78ec..0350afa 100644
--- a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml
+++ b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml
@@ -8,7 +8,7 @@
 ---
 parameters:
   _param:
-    salt_control_xenial_image: https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-arm64-uefi1.img
+    salt_control_xenial_image: salt://salt/files/control/images/base_image_opnfv_fuel_vcp.img

     # VMs spawned on Foundation Node / Jump Host net ifaces (max 4)
     opnfv_fn_vm_primary_interface: enp1s0
diff --git a/mcp/scripts/lib.sh b/mcp/scripts/lib.sh
index c6d5d26..654f45e 100644
--- a/mcp/scripts/lib.sh
+++ b/mcp/scripts/lib.sh
@@ -1,4 +1,5 @@
 #!/bin/bash -e
+# shellcheck disable=SC2155,SC1001
 ##############################################################################
 # Copyright (c) 2017 Mirantis Inc., Enea AB and others.
 # All rights reserved. This program and the accompanying materials
@@ -11,7 +12,6 @@
 #

 function generate_ssh_key {
-  # shellcheck disable=SC2155
   local mcp_ssh_key=$(basename "${SSH_KEY}")
   local user=${USER}
   if [ -n "${SUDO_USER}" ] && [ "${SUDO_USER}" != 'root' ]; then
@@ -35,6 +35,110 @@ function get_base_image {
   wget -P "${image_dir}" -N "${base_image}"
 }

+function mount_image {
+  local image=$1
+  local image_dir=$2
+  OPNFV_MNT_DIR="${image_dir}/ubuntu"
+
+  sudo modprobe nbd loop
+  # Find free nbd, loop devices
+  for dev in '/sys/class/block/nbd'*; do
+    if [ "$(cat "${dev}/size")" = '0' ]; then
+      OPNFV_NBD_DEV=/dev/$(basename "${dev}")
+      break
+    fi
+  done
+  OPNFV_LOOP_DEV=$(losetup -f)
+  export OPNFV_MNT_DIR OPNFV_LOOP_DEV
+  [ -n "${OPNFV_NBD_DEV}" ] && [ -n "${OPNFV_LOOP_DEV}" ] || exit 1
+  sudo qemu-nbd --connect="${OPNFV_NBD_DEV}" --aio=native --cache=none \
+    "${image_dir}/${image}"
+  sleep 5 # /dev/nbdNp1 takes some time to come up
+  # grub-update does not like /dev/nbd*, so use a loop device to work around it
+  # Hardcode partition index to 1, unlikely to change for Ubuntu UCA image
+  sudo losetup "${OPNFV_LOOP_DEV}" "${OPNFV_NBD_DEV}p1"
+  mkdir -p "${OPNFV_MNT_DIR}"
+  sudo mount "${OPNFV_LOOP_DEV}" "${OPNFV_MNT_DIR}"
+  sudo mount -t proc proc "${OPNFV_MNT_DIR}/proc"
+  sudo mount -t sysfs sys "${OPNFV_MNT_DIR}/sys"
+  sudo mount -o bind /dev "${OPNFV_MNT_DIR}/dev"
+  sudo mkdir -p "${OPNFV_MNT_DIR}/run/resolvconf"
+  sudo cp /etc/resolv.conf "${OPNFV_MNT_DIR}/run/resolvconf"
+  echo "GRUB_DISABLE_OS_PROBER=true" | \
+    sudo tee -a "${OPNFV_MNT_DIR}/etc/default/grub"
+}
+
+function apt_repos_pkgs_image {
+  local apt_key_urls=(${1//,/ })
+  local all_repos=(${2//,/ })
+  local pkgs_i=(${3//,/ })
+  local pkgs_r=(${4//,/ })
+  [ -n "${OPNFV_MNT_DIR}" ] || exit 1
+
+  # APT keys
+  if [ "${#apt_key_urls[@]}" -gt 0 ]; then
+    for apt_key in "${apt_key_urls[@]}"; do
+      sudo chroot "${OPNFV_MNT_DIR}" /bin/bash -c \
+        "wget -qO - '${apt_key}' | apt-key add -"
+    done
+  fi
+  # Additional repositories
+  for repo_line in "${all_repos[@]}"; do
+    # <repo_name>|<repo prio>|deb|[arch=<arch>]|<repo url>|<dist>|<repo comp>
+    local repo=(${repo_line//|/ })
+    [ "${#repo[@]}" -gt 5 ] || continue
+    # NOTE: Names and formatting are compatible with Salt linux.system.repo
+    cat <<-EOF | sudo tee "${OPNFV_MNT_DIR}/etc/apt/preferences.d/${repo[0]}"
+
+		Package: *
+		Pin: release a=${repo[-2]}
+		Pin-Priority: ${repo[1]}
+
+		EOF
+    echo "${repo[@]:2}" | sudo tee \
+      "${OPNFV_MNT_DIR}/etc/apt/sources.list.d/${repo[0]}.list"
+  done
+  # Install packages
+  if [ "${#pkgs_i[@]}" -gt 0 ]; then
+    sudo DEBIAN_FRONTEND="noninteractive" \
+      chroot "${OPNFV_MNT_DIR}" apt-get update
+    sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \
+      chroot "${OPNFV_MNT_DIR}" apt-get install -y "${pkgs_i[@]}"
+  fi
+  # Remove packages
+  if [ "${#pkgs_r[@]}" -gt 0 ]; then
+    sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \
+      chroot "${OPNFV_MNT_DIR}" apt-get purge -y "${pkgs_r[@]}"
+  fi
+  # Disable cloud-init metadata service datasource
+  sudo mkdir -p "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d"
+  echo "datasource_list: [ NoCloud, None ]" | sudo tee \
+    "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d/95_real_datasources.cfg"
+}
+
+function cleanup_mounts {
+  # Remove any mounts, loop and/or nbd devs created while patching base image
+  if [ -n "${OPNFV_MNT_DIR}" ] && [ -d "${OPNFV_MNT_DIR}" ]; then
+    if [ -f "${OPNFV_MNT_DIR}/boot/grub/grub.cfg" ]; then
+      # Grub thinks it's running from a live CD
+      sudo sed -i -e 's/^\s*set root=.*$//g' -e 's/^\s*loopback.*$//g' \
+        "${OPNFV_MNT_DIR}/boot/grub/grub.cfg"
+    fi
+    sudo rm -f "${OPNFV_MNT_DIR}/run/resolvconf/resolv.conf"
+    sync
+    if mountpoint -q "${OPNFV_MNT_DIR}"; then
+      sudo umount -l "${OPNFV_MNT_DIR}" || true
+    fi
+  fi
+  if [ -n "${OPNFV_LOOP_DEV}" ] && \
+    losetup "${OPNFV_LOOP_DEV}" 1>&2 > /dev/null; then
+      sudo losetup -d "${OPNFV_LOOP_DEV}"
+  fi
+  if [ -n "${OPNFV_NBD_DEV}" ]; then
+    sudo qemu-nbd -d "${OPNFV_NBD_DEV}" || true
+  fi
+}
+
 function cleanup_uefi {
   # Clean up Ubuntu boot entry if cfg01, kvm nodes online from previous deploy
   # shellcheck disable=SC2086
@@ -60,22 +164,45 @@ function cleanup_vms {
 function prepare_vms {
   local base_image=$1; shift
   local image_dir=$1; shift
+  local repos_pkgs_str=$1; shift # ^-sep list of repos, pkgs to install/rm
   local vnodes=("$@")
+  local image=base_image_opnfv_fuel.img

   cleanup_uefi
   cleanup_vms
   get_base_image "${base_image}" "${image_dir}"
+
+  rm -f "${image_dir}/${image%.*}"*
+  if [[ ! "${repos_pkgs_str}" =~ ^\^+$ ]]; then
+    IFS='^' read -r -a repos_pkgs <<< "${repos_pkgs_str}"
+    cp "${image_dir}/${base_image/*\/}" "${image_dir}/${image}"
+    mount_image "${image}" "${image_dir}"
+    apt_repos_pkgs_image "${repos_pkgs[@]:0:4}"
+    cleanup_mounts
+  else
+    ln -sf "${image_dir}/${base_image/*\/}" "${image_dir}/${image}"
+  fi
+
+  # CWD should be <mcp/scripts>
   # shellcheck disable=SC2016
   envsubst '${SALT_MASTER},${CLUSTER_DOMAIN}' < \
     user-data.template > user-data.sh

+  # Create config ISO and resize OS disk image for each foundation node VM
   for node in "${vnodes[@]}"; do
-    # create/prepare images
     ./create-config-drive.sh -k "$(basename "${SSH_KEY}").pub" -u user-data.sh \
        -h "${node}" "${image_dir}/mcp_${node}.iso"
-    cp "${image_dir}/${base_image/*\/}" "${image_dir}/mcp_${node}.qcow2"
+    cp "${image_dir}/${image}" "${image_dir}/mcp_${node}.qcow2"
     qemu-img resize "${image_dir}/mcp_${node}.qcow2" 100G
   done
+
+  # VCP VMs base image specific changes
+  if [[ ! "${repos_pkgs_str}" =~ \^{3}$ ]] && [ -n "${repos_pkgs[*]:4}" ]; then
+    mount_image "${image}" "${image_dir}"
+    apt_repos_pkgs_image "${repos_pkgs[@]:4:4}"
+    cleanup_mounts
+    ln -sf "${image_dir}/${image}" "${image_dir}/${image%.*}_vcp.img"
+  fi
 }

 function create_networks {
@@ -100,6 +227,8 @@ function create_networks {

 function create_vms {
   local image_dir=$1; shift
+  # vnode data should be serialized with the following format:
+  # '<name0>,<ram0>,<vcpu0>|<name1>,<ram1>,<vcpu1>[...]'
   IFS='|' read -r -a vnodes <<< "$1"; shift
   local vnode_networks=("$@")

@@ -139,9 +268,7 @@ function create_vms {

 function update_mcpcontrol_network {
   # set static ip address for salt master node, MaaS node
-  # shellcheck disable=SC2155
   local cmac=$(virsh domiflist cfg01 2>&1| awk '/mcpcontrol/ {print $5; exit}')
-  # shellcheck disable=SC2155
   local amac=$(virsh domiflist mas01 2>&1| awk '/mcpcontrol/ {print $5; exit}')
   virsh net-update "mcpcontrol" add ip-dhcp-host \
     "<host mac='${cmac}' name='cfg01' ip='${SALT_MASTER}'/>" --live
diff --git a/mcp/scripts/salt.sh b/mcp/scripts/salt.sh
index ab096f3..b719aa8 100755
--- a/mcp/scripts/salt.sh
+++ b/mcp/scripts/salt.sh
@@ -18,6 +18,8 @@ OPNFV_TMP_DIR="/home/${SALT_MASTER_USER}/opnfv"
 OPNFV_GIT_DIR="/root/opnfv"
 OPNFV_FUEL_DIR="/root/fuel"
 OPNFV_RDIR="reclass/classes/cluster/all-mcp-ocata-common"
+OPNFV_VCP_IMG="mcp/scripts/base_image_opnfv_fuel_vcp.img"
+OPNFV_VCP_DIR="/srv/salt/env/prd/salt/files/control/images"
 LOCAL_GIT_DIR="${F_GIT_ROOT%${F_GIT_SUBD}}"
 LOCAL_PDF_RECLASS=$1
 NODE_MASK='*'
@@ -34,6 +36,11 @@ if [ -n "${LOCAL_PDF_RECLASS}" ] && [ -f "${LOCAL_PDF_RECLASS}" ]; then
   rsync -e "ssh ${SSH_OPTS}" "${LOCAL_PDF_RECLASS}" \
     "${remote_tmp}${F_GIT_SUBD}/mcp/${OPNFV_RDIR}/opnfv/"
 fi
+local_vcp_img=$(dirname "${LOCAL_PDF_RECLASS}")/$(basename "${OPNFV_VCP_IMG}")
+if [ -e "${local_vcp_img}" ]; then
+  rsync -L -e "ssh ${SSH_OPTS}" "${local_vcp_img}" \
+    "${remote_tmp}${F_GIT_SUBD}/${OPNFV_VCP_IMG}"
+fi

 # ssh to cfg01
 # shellcheck disable=SC2086,2087
@@ -95,4 +102,9 @@ ssh ${SSH_OPTS} "${SSH_SALT}" bash -s -e << SALT_INSTALL_END
   salt -C "${NODE_MASK} and not cfg01*" pkg.upgrade refresh=False

   salt -C "${NODE_MASK} or cfg01*" state.sls ntp
+
+  if [ -f "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" ]; then
+    mkdir -p "${OPNFV_VCP_DIR}"
+    mv "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" "${OPNFV_VCP_DIR}/"
+  fi
 SALT_INSTALL_END