Age | Commit message (Collapse) | Author | Files | Lines |
|
Project: fuel bc437743bf7d775b78af83d651b45e6baf9ccf47
Final Colorado document review.
- Please review the rendered HTML document (See Jenkins references below)
- Please verify the documented procedures and instructions
READY TO MERGE
Change-Id: Idff52212ca68ce2b97f203043e18a18c582589a7
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: vswitchperf 5aa0dc99f1cf9bf1a0a1d86143d6a1cbcc778691
docs: Fix links and formatting
Documentation was updated as follows:
* section decorators were fixed in LTD
* links to testcase and deployment
descriptions were fixed
* duplicate labels removed from LTP<D
* fixed typos in formatting and text
* links to scalability and stress tests
fixed after their renaming
JIRA: VSPERF-349
Change-Id: I86c2b723231431388b69d3d696805de2a4e12435
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Project: vswitchperf ddd9674fc7595788c58acdc564573cb228658b84
multi VM: Fix p2p deployment
Revert enforced vsperf failure in case, that VnfController
is used in scenario without VNFs. Instance of VnfController
is created for all scenarios including p2p, so it must
be prepared for it.
JIRA: VSPERF-361
Change-Id: Icf6e88e7ea62044c09bb194c260ea878d6a197c9
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
|
|
Project: fuel b39d8493d27b7fb03932628ae07ee3d2394e0a04
build: Move patches to <patch-repos> dir
Decouple main Makefile and repository patches by moving all Fuel
component patches to a subdir, <patch-repo>.
Proposed structure of <patch-repos> dir:
- patch-repos/*.patch are intended for <fuel-main> git repo;
- patch-repos/build/repo/<fuel-module>/*.patch are intended for
<fuel-module>, e.g. "fuel-nailgun";
Full list of Fuel submodules supported by this mechanism at [1].
While at it, replace all occurences of </tmp/fuel-main> with
<FUEL_MAIN_DIR> in main Makefile and rewrite a few git/make calls
to use the "-C" arg.
NOTE: `git -C` is available starting with git 1.8.5.
[1] https://github.com/openstack/fuel-main/blob/stable/mitaka/repos.mk
#L32-L44
Change-Id: I5e4adc7285054777c3898592ed48482ccd2b706f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel bbd6bb0b5f4adb8e05cd25cd3830f0daa50af128
Do not use rsync for choosing mirror server
Rsync protocol was used for creating local mirrors, but now we only need
http connection. This requirement can be problematic for environments
which are behind proxy and can lead to build failures when rsync is not
allowed.
Change-Id: I4efcf500fd0c25de5fdb87307e7210cc4a96714d
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel 9d871421fbc631f875f7a8bdca590b42eb1bd3bf
Change source of ODL Boron tarball
For SFC scenario we need to use ODL Boron. Since it is not yet released
there is no persistent location for a tarball. Use opnfv artifacts to
store Boron build which include required changes.
Change-Id: I43e35dbdf5ca0160d48a1adc817db071fd5db85d
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: vswitchperf 8363f8c6387449186b5656af5a5fc44bedc906b1
test_spec: Remove formatted text file verions of IETF Draft
Remove files with IETF copyrights (Internet Draft .txt files).
I assume these files have to be removed in C-stable branch...
JIRA: VSPERF-387
Change-Id: I76709ab055f845cec0bec8d07b14c29dec349f54
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Project: vswitchperf 6a56d40bcb2de85c22bc19af2527e9c9227f33e2
multi VM: Multi VMs in serial or parallel
Support for deployment scenarios with any number of VMs
in both serial and parallel configuration. Detailed
content of the patch:
* VswitchControllerPXP class for multi VM support
* pvvpxx and pvpvxx deployments for xx VMs in
serial respective parallel configuration
* special GUEST_ options expansion to requested
number of VMs;
* support of GUEST_ options specific macros
#VMINDEX, #MAC(), #IP() and #EVAL()
* all GUEST specific options are turned to lists
to be VM specific
* support for VM with 1 NIC
* support for VM with multiple NIC pairs; traffic
is routed in serial or parallel between NIC paris
based on deployment scenario
* support for PVVP and PVPV scenarios using VMs
with different numbers of NICs
JIRA: VSPERF-361
Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Project: vswitchperf 695f734862c884d09c24b54d8d2914b3816837f2
docs: Remove links to Brahmaputra documentation
Hyperlinks to the yardstick documentation were updated
to refer to files generated from the master branch.
JIRA: VSPERF-349
Change-Id: I248795b6a951377885492515fa9b96a694c9da5d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Project: vswitchperf 7cc12c9748cfc758aa5ac164dfb13b900ef9dd82
vhost_affin_fixup: Change vhost thread from regex to pgrep usage
Change vhost affinity process lookup to use pgrep instead of
ugly error prone regex method as suggested.
Change-Id: I8cac00a7f2d26ba1ce1815535a198f578159222c
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Project: fuel 5589b0e1659e8e0de0bc1055753685c9fd58f13a
[OVS-DPDK] Set default for dpdk_socket_mem
Change-Id: I175178cdcbab52ac024157d2c5707fd7e1236dd4
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Project: fuel 72613c121a3c28f43436bf26b8f65369fc46f520
Shift opendaylight role out of controller
In order to unload controller resources place
opendaylight role to a separate node.
Change-Id: I63db4074a9b50d80e8b8b29abd385b37bdb5f9d7
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Project: fuel cb7f00257d567a1da7d820cb03c15723ca5bd28c
[OVS-DPDK] Allocate dpdk socket memory
JIRA: FUEL-186
Change-Id: Id44a786f69d78b378fbabea2c70ab1ca78651729
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Project: fuel 5b24755186a36c79f03596d52cd4ba2627791470
deploy/reap.py: Dump extra interfaces information.
Since on AArch64, Ubuntu local mirror lacks arm64 packages (see [1]),
Fuel master requires internet connectivity during deploy, and hence
a way to setup such a public (extra) interface automatically.
Previous commit "transplant: Generate extra interfaces config file"
introduced support for passing this information via DEA (override),
which may define a IFCGF_<interface> section in its 'fuel:'
section, containing the necessary keys to produce a ifcfg-<interface>
file, like in this example:
fuel:
IFCFG_ETH1:
device: eth1
ipaddress: 10.0.1.10
netmask: 255.255.255.0
gateway: 10.0.1.254
In order for Network Manager to use the newly added interfaces
for outgoing traffic and honor their GATEWAY setting (e.g. if we just
added one public interface), the default route on admin iface (most of
the time called eth0) is disabled when extra interfaces are present.
FIXME: Only supports lowercase interface names, but so does Fuel,
see related bug report [2].
[1] https://jira.opnfv.org/browse/ARMBAND-35
[2] https://jira.opnfv.org/browse/FUEL-136
Change-Id: I14b023b2b9b4c7d9b9f390d4f86f693c176efde0
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 14c4e711f59917e1b299230668d8a4439f09d943
transplant: Generate extra interfaces config file
Original work by Josep, only signed by Alex for upstreaming.
The DEA override may contain a IFCGF_<interface> section in its 'fuel:'
section, containing the necessary keys to produce a ifcfg-<interface>
file, like in this example:
fuel:
IFCFG_ETH1:
device: eth1
ipaddress: 10.0.1.10
netmask: 255.255.255.0
gateway: 10.0.1.254
FIXME: In order for Network Manager to use the newly added interfaces
for outgoing traffic and honor their GATEWAY setting (e.g. if we just
added one public interface), the default route on admin iface (most of
the time called eth0) should be disabled. For now, we assume the admin
interface is always "eth0".
Change-Id: I96e3ac5046dd59ed10c43099dd76a6418806a1f3
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel de6d5d4b6ba6848304d620e65ad97f3aeeadccd5
docs: build req: Remove p7zip-full
p7zip-full is not required for building, as stated in the current
version of the docs. I think this bogus requirement was introduced
by Armband (by me, more precisely) because our build process was
happening outside docker.
Sorry for the useless code churn.
Change-Id: Id0a3c5b9016706535ca159e1da261e83c8d36d31
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 6222031ed4e195fee85d6e3bdb5f34845fa061e9
repo mirror: Allow multi-arch local mirrors
Original patch from Stan, signed by me for upstreaming.
This patch allows specifying multiple architectures via UBUNTU_ARCH in
form of a list of space separated architectures. The first architecture
in the list is considered primary and will be used for building all the
deb packages by fuel-main. Additional architectures are added to allow
targets of other architectures to use the mirror.
NOTE: this imposes a requirement that all packages built are arch
independent (which is true so far).
[ Alexandru Avadanii ]
Reworked for applying on top of Fuel@OPNFV.
Pass UBUNTU_ARCH to Docker containers.
Change-Id: Ibc4ae03223545383813ac58ec34d44c1f97b4694
Signed-off-by: Stanislaw Kardach <stanislaw.kardach@cavium.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
build: cache: Consider UBUNTU_ARCH in .cacheid
Usually UBUNTU_ARCH is not changed inside the same repository,
but we should consider this case anyway for future merging
Armband and Fuel@OPNFV repositories/build systems.
This applies to all Fuel plugins and the local repo.
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 7cff3184b3cefae5894eeef78bb3490818bc8141
deploy: Delete old Fuel env if present
In order to clean up old partitioning and boot entries on target
nodes, before removing the Fuel Master, try ssh-ing into it and
removing all environments/nodes.
This is especially important for EFI systems, where old boot
entries are left behind without a proper env delete, leading to
target nodes failing to PXE boot on Fuel Master re-install.
This change assumes that:
- all Fuel Master information is unchanged between old and new
deploy (fuel IP, password etc.);
- Fuel Master is up and running, in a sane state (target nodes
are also online), when deploy starts;
Closes: ARMBAND-51
Change-Id: I7b61124ea9182ce2d599adcdedef03e0d8d67ed6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: vswitchperf b2289e1f6abab2d807eb55d9ec868039dc2384e2
pkt_gen: MoonGen Incorrect RX_MBPS Calculation
Misplaced parenthesis regarding THROUGHPUT_RX_MBPS
JIRA: VSPERF-381
Change-Id: Ie33cf6ca88164f0686a819715b5f9f7409072063
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: fuel a0f0fb312899a44e80ec0339a44497b6e1c94bff
deploy.sh: accept a timeout flag (-T)
Original work by Josep, signed by me (Alex) for upstreaming only.
Change-Id: I58a7b9bc639bb03b994ea34fc317f5679140d9fd
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 24fbcdb907ad584d4333a3428d06eff9ef7a2d5f
build: cache: Allow LOCAL_CACHE_ARCH_NAME override
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel d4f2f2a03cc7c6e0b9af49d18cc9c08c68306ca5
build: Allow PLUGINS override
Instead of using BUILD_FUEL_PLUGINS, which was intended for manual
overrides of the Fule@OPNFV plugin list, allow PLUGINS to be
preset to a custom list, which we will provide via Armband
Makefile spec.
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
build: Allow MIRROR_MOS_UBUNTU override
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel ad0dd57dc045b58c46e53f281ab57e70d00947d7
Script updates for CI job
Due to the redesign of the SFC feature test, the poc script became
part of CI job functest-fuel-baremetal, scenario os_odl_l2-sfc-ha,
there is a need of full uplift to colorado.
Changes:
- GPG keyserver use (line 61)
- patch updated fixing the debian package dependency issue
(python-oslo.messaging-)
- some typos are fixed
- OpenDayLight address is read from hiera (management vip)
Change-Id: I4a19ec753a575220cf321819ab4ff2d9433ec16c
Signed-off-by: ferenc Cserepkei <ferenc.cserepkei@ericsson.com>
|
|
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: vswitchperf cd22516b0f625e87ef100a7937d3ba9ba8f155e7
docs: vloop-vnf changelog update
Documentation was updated to reflect recent changes
of vloop-vnf image.
JIRA: VSPERF-374
Change-Id: I65a34a7618593a7b77c38eb2fa4c87619b937346
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Project: vswitchperf 0fb65d2afadad1f092788f5a4f251b09851b3ae7
Vanilla_Multi_Queue: Add vanilla ovs multi-queue functionality
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Project: fuel 93839f90bf2be3f4aec3103c1c3bcca1d4a29c30
[DOC] Do not create mailto link for Fuel@OPNFV name
Change-Id: Ib130e8a2440531c3b9c484c9e516c72d5b20301b
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel c82fb21ae0237116600c68ef6017dd470965c6b8
[ODL] Fix odl deployment on separate node
JIRA: FUEL-185
Change-Id: Id14d30154b63abc915a0cd55835bb72cee862dde
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel 087c8de9c667b28506b7621d5147be4846c06397
Final updates of the Installation instructions:
- Images updated
- Updated reference URIs
Change-Id: Ieeefbd8a3ef9bbd6c3a0e767f770097ab8a98f9d
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
|
|
Project: fuel 9f00e08b54ac2be36e6315adc3bd29f7e3bd40d8
Final Updates of the build instructions
- Updated references
Change-Id: I2a6cfdec0de6afa41ea8af59f415439b7ab7056d
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
|
|
Project: vswitchperf bd8712a917d9a0c7272506fd85816f857c32529e
guest_drive_type: Adds guest drive configuration options
Adds boot and mounted drive configuration options.
JIRA: VSPERF-379
Change-Id: Ic0673a9b9f7a3430d7ac4db5fb9bf4228872f501
signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: Id89153e39e9c163df77e275ed4526961d6800d3c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel ae8196be2c5863a5ca837828eead7188d608023d
Fix ovs scenario configuration
Due the incorrect indentation install_dpdk option was not set to true.
JIRA: OVSNFV-37
Change-Id: Ida3b0d1e72ce8322905ff399af89b43cac878299
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: vswitchperf 1ea5c5239f9003f9cb8492f1d5b00a75724a7180
cuse: Remove vHost Cuse support
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
Project: fuel 08526c7376ee1b155dfb51f164f46f14f4ec6e52
Changing ODL change into FUEL_PLUGIN_ODL
Some users where confused if the change we are doing
here is a change to ODL or the fuel-plugin-opendaylight.
So renaming helps for more understanding.
Change-Id: I886d7be3db995f37f9451c06ee22c16d540254e1
Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
|
|
Since arm64 support has been proposed straight upstream [1], we
no longer have to keep the git submodule for the yarstick repo.
[1] https://gerrit.opnfv.org/gerrit/#/c/18883/
Change-Id: Ic8a02106ed1d26012a0767fc0444b8f8d35c54aa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: yardstick 27e254c2273e4be503053db882948b8abf53b269
Add grafana config for TC074_Storperf
Change-Id: If415a6e6170c52f3586a1521f6f239daad3d527c
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 0e9572495a707215f5e43a1b1f5c850b6f159e98
add doc about scenario suite help
Change-Id: Ib8dfc56e8b84cdba04fc18f13ac780b2103c0b5d
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 025432b9fa0bc6061ab34a71f0f28bdec4cf7641
add grafan config for ha test cases tc045~tc049
Change-Id: I1adc9ab36a71195e7c03fe4f3b7322ea40aa2a40
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 94c16e0c5a7589951aea3fb9ff4dd01f37a327f4
Add grafana config for TC069_memory_bandwidth(RAMspeed)
Change-Id: I06ac3df77f35b14746a4b07ebc16d46dc83624c1
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 3118c2402c97657547ec2afd387498cba4cc91cc
Add grafana config for TC071_Network Latency, Throughput, Packet Loss and Cache Utilization
Change-Id: Ica0431df75628f08eb2ba558681c5740a038ab1d
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick c5c3634a7252928998e026191671038f54dca5f6
Add grafana config for TC063_StorageCapacity
Change-Id: Ib960e249770902b57d65fe9fe811c1565a5dc867
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 9219667892ae778aa6f9ea1ab29efc6923e6c5f3
bugfix: storperf not use expect
Change-Id: I64af691ef25e61aeaa106e6662152dc46326c3f0
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick bd97bf5dddf4411c6c51939b55ef19c985d526cd
Restructure user-guide
Add 09-result-store-InfluxDB.rst
Update index.rst for 09-result-store-InfluxDB.rst
Change-Id: I44e662db07e206e58812d7a997036936a95b5137
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick e5a2154bf5c2a18c661fa3fba540c172f177dec1
bugfix: storperf scp do not work
Change-Id: I4d6441dff2afddb2290f4855f714d811e8394a51
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 6234e5e4edca9a92322fb0eb0aaf625291a42a7a
add starttime stoptime for mongodb
Change-Id: Ia818d37f12af4576b98c578d819df0bb0998c154
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: fuel c71b57140fdbadfb4c1f39bf0e2df99403820ddb
Claenup
Remove the workaround marked by "# fix me" mentioned in commit id:
e8928f93b50df3ecb11942ab754bae848c082c6a, since the issue (some files
generated during kvmfornfv building are owned by "root") already
resolved in fuel-plugin-kvm build process.
Change-Id: I5efb60173b9974f6fba25f04da1f4b1f53207b1a
Signed-off-by: davidjchou <david.j.chou@intel.com>
|
|
Project: fuel 8580caa96234cdda3f7c4cf4a5965a0fd411fce0
[KVM]Add support for Broadcom NetXtremeII 10Gb
This NIC is used on Ericsson CI POD2
JIRA: KVMFORNFV-45
JIRA: FUEL-171
Change-Id: I44576b399b6195ccc1e64dfc0b04e239ced8acc7
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|