Age | Commit message (Collapse) | Author | Files | Lines |
|
Project: vswitchperf da059df422c839bb5d6393455a43c44e95873c73
pkt_gen: MoonGen incorrectly calculates rx/tx % statistics
For MoonGen, the final results parameters: throughput_rx_percent,
throughput_tx_percent were incorrectly calculated when converting
MoonGen to VSPERF format. In particular, this would occur when more
than one data stream (single channel unidirectional traffic) was used in
the test. When calculating these percentages, only aggregate throughput
values equaling unidirectional traffic were used (for example, for 64
byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps)
JIRA: VSPERF-341
Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: vswitchperf b219f67de8e314e419108d9e15667c2cd2b973d1
sriov: PCI IDs must be checked before usage
Order of NIC PCI IDs handling was changed to ensure their
check and possible expansion (by missing domain part)
before their first usage. This avoids a vsperf crash
in case that sriov is configured and short NIC PCI IDs
are used.
JIRA: VSPERF-363
Change-Id: I91f724e9558bce5a92520de72b4bf000f33d2f29
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf 28b133e55f7bb8728c699b1e5db575c12dd01965
dpdk: Testpmd forwarding mode changes in v16.07
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf fc480dd1139f12730c68c72f738b3df8080af283
install: Missing packages for numa library
Recent versions of DPDK (16.xx) depend on numa library.
Thus installation scripts were updated to install both
binary and development packages.
JIRA: VSPERF-360
Change-Id: Idd0eac8758f30a355909bb804e99e650b67bba8b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf 77de48c31767556fb9f0de76285d1beed16dd828
Xena: Modify aggregate_stats one port no stats when bi-direction
Xena exception when no stats collected on receive on one port
during bi-directional traffic. Modify aggregate_stats in the
XenaDriver.py, add judge whether the two port both has stats,
if one port has no stats, the result use the port's value which
has stats.
JIRA: VSPERF-327
Change-Id: I18c349d609a2834907f0383dbfbebd5cd281f541
Signed-off-by: liting <tli@redhat.com>
|
|
Project: fuel aa5d41bfa5ecdf5c53512194a9816cbec95b4da2
Don't use -f flag with docker tag
-f flag has been deprecated since v1.10.0 and is removed from v1.12.0.
If user use recent version of docker iso built will fail.
https://docs.docker.com/engine/deprecated/#/f-flag-on-docker-tag
JIRA: FUEL-163
Change-Id: If42781f342d59db7672322ec07063d09a23e1dcb
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: vswitchperf 896f0fe61346916a560c01c0eae638894d653d7e
Hugepages: on the fly allocation.
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION
amount of RAM for hugepages.
JIRA: VSPERF-290
Change-Id: I092b3831254579eeebbe45e85884828f9d749895
Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
|
|
Project: vswitchperf 236073f3963ee4dc038eea3b42d60644ebfc703f
pkt_gen: MoonGen start rates not correct
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: vswitchperf bf43287f11e85143148e5be6c81b7e9894652eac
docs: Update vloop-vnf changelog
Updated version of vloop-vnf image was added into the changelog inside
installation guide.
JIRA: VSPERF-349
Change-Id: I64a1acdf2191858dc282ea6c3b588048b3bdd742
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: fuel cf58d9d488fde91a5177ae01363844da8ec8441c
Allow to use Intel NICs for DPDK on Ericsson POD2
JIRA: FUEL-161
Change-Id: I009ba7e9587f3c47d8e609c96b0666394887929e
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: yardstick e023a2ee7023588fda3e0d7cfebc693e4903beb6
[Yardstick-233]DPDK image for TC042
These file is based on Akos's code.
(https://gerrit.opnfv.org/gerrit/#/c/16095/)
The different places:
1. create flavor and import yardstick_key.pub with heat template.
2. remove handle code about eth0 in user_data.
3. update heat cli and delete step "nova stop" which is not necessary.
4. clean the stack in final.
5. add eth2 for vm.
JIRA: YARDSTICK-233
Change-Id: I04f2051fb4bcfeed2df4868d758fd92011c62233
Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
|
|
Project: yardstick 9d493a68b3df583a8875e22dbe58eaaa61511608
Add test case description for TC061
Change-Id: Ib73a7437ade77abd70df1412d94e0e9c8a8885a8
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 86b9fc4f434c72bd276e4bf1ce7d7f5a04b150b2
Modify grafana config for TC002_Ping as ping output format has been changed
Change-Id: I758d3efd909011c0c197519d33dca7d579cc5cce
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 545ac267f0080a456984f7975febff28ef4c61c7
Support Storage Capacity Test
It measures disk size, block size and disk utilization.
JIRA: YARDSTICK-284
Change-Id: I61b3fb8a35da41c77450c157f843fb853d77dddd
Signed-off-by: wangyaoguang <sunshine.wang@huawei.com>
|
|
Project: fuel f0463e6234cd27eaa2e0cd3ded0b035d89aa918c
Fix config for no-ha kvm scenario
JIRA: FUEL-157
Change-Id: I09e595902b2c467b5522b7b37a772f7ab35c8cea
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel 5c9590de139f16bdb764b24ecc5dff76640b210e
Add collectd package for collectd ceilometer plugin
Change-Id: I8da0087d8f17f5f2e4c3275a26ad2ca164878226
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
Project: vswitchperf 40460b1fd291612cca316527c4366e83ae295ce2
docs: Enhancement of IxNetwork configuration guide
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf 48feb686c3b6648d4bc52b155a053ec5b5883e9a
docs: Update release notes
Release notes were updated with features introduced by Colorado
release.
JIRA: VSPERF-349
Change-Id: I43179028c973cae4be6746e633c27fd3419e951a
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf 80414a002e0a10dcce9126786d51695fc350cb47
pkt_gen: Remove commas from MoonGen results
Results from other traffic generators are reported as
pure numbers, i.e. 2477356.0000. These values are
consumed and processed by other scripts (e.g. CI or
OPNFV results visualization), so we should keep it
consistent among various traffic generators.
JIRA: VSPERF-342
Change-Id: I305421287eb632707038f2c8bc594fcb255ec939
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: fuel 5bfea5d5b88a167b754384f07453a80d416d7337
build: fuel-main: Decouple patches, Makefile.
Tested in armband, with very small adaptions.
Use `git apply` and/or `git am` in favor of `patch`.
Change patches from old context format to unified diff.
This change allows us to decouple Makefile and patches.
This means we no longer have to manually stage touched files
before committing them to git.
Possible improvements:
- move patches to separate dir and add ordering info (prefix);
- merge patches (currently we have one per touched file);
Remove obsolete (unused?) patch:
- fuel-main_docker_version.patch
Change-Id: I5b621370993b259779c813b47105f632948e6da7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: vswitchperf 65034580a2759c89c418e0a47ee16bee10cc2c7c
xena_deadlock: Fix xena2544.exe deadlock
Fix Xena2544.exe execution with mono where sometimes the
Xena process says complete, but the mono process doesn't exit.
Changes call of Xena2544.exe from communicate thread lock to a
wait try/catch block and checks the log periodically to see
if a deadlock has occured and if so, the mono pid is terminated
to prevent deadlock.
* Fix one small issue with typecasting to int, changed to float
JIRA: VSPERF-319
Change-Id: Ie7a86a2b9ff9cdfacba5a912ad17df6cc0581702
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Project: fuel 7a02094add80d97be77754c3c404e9d1c1a769c6
Add functionality to generate a base DEA file
- Add template file for base DEA
Change-Id: I8055087b992fdc9850852bad9fa07a4e4fde0085
Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
|
|
Project: fuel 2c8231be1aebe869297aa5ca15870da70338bd68
Make it possible to include files in templates
Change-Id: I45c42ac65cfbe6562f0035df3375a2231148e22e
Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
|
|
Project: fuel ef0d47da19062f1fd5574fdb97409c290798f800
Refactor deploy-config.py
- fix vertical whitespace
- more consistent function naming
- clean up file writes
- break up some long lines
- typo fixes
- remove duplicate spaces
- unify print's
Change-Id: I5517747ef9f2e39ade7fb553ae2b1547fdf7b9e1
Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
|
|
Project: yardstick 248836fe41a16a705752c6f84553d1026a67c806
Modify grafana config for TC037_Network Latency, Throughput, Packet Loss and CPU Load
Change-Id: I898c80328751c81a644ad824f2dd83a56021afd6
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: vswitchperf 7ad56eff11393807085775f075fcc93640c26ce2
pkt_gen: MoonGen incorrectly inserting VLAN tag
MoonGen needs to take into account the VLAN tag 'enable'
control knob defined within the VSPERF traffic profile
and therefore only insert the VLAN tag when its 'True'.
JIRA: VSPERF-329
Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: yardstick c89fda5b5e7ae1ce501fba9e506ff3528c7d6f92
Create Bash Sheel Utilities
JIRA: YARDSTICK-277
Change-Id: I7379d4fe375d22e544ab93b48d56a017a60c4b9f
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
|
|
Project: yardstick fe46800c17c055ee337dddb2e2de00d6db128cda
Bugfix: Only add keyword "external_network" to the first network
In test case yaml file, when vm need three networks and enable
floating ip true, it should only add keyword "external_network"
to the first one.
'networks': {'test': {'cidr': '10.0.1.0/24', 'external_network':
'admin_floating_net'}, 'test3': {'cidr': '10.0.3.0/24'},
'test2': {'cidr': '10.0.2.0/24'}}
JIRA:YARDSTICK-309
Change-Id: I1126955749b598b8c5460ac75843c1939b4f8443
Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
|
|
Project: yardstick f29d785861ae0021ffe35b054ab77379253abb8b
Bugfix: specify pod.yaml files used for TC055 as TC055 is running directly on nodes
Change-Id: Ida71b4027010b3c0eebe03498cf870d288b63e0f
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 2c8db1d8bf6ba6a112c186416dafacc1d797d40e
Update test case description for TC024
Change-Id: I3ad81be92a52db913e0b7e791c71162a8ed3af01
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 7df24abc9a6bdb6d880959e0103f438b88030b55
Add zte-pod1.yaml
JIRA: Yardstick-313
Change-Id: I7dc908e55e9c3c891a525a3285c6ae42a1bcae48
Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
|
|
Project: yardstick 4ccc305237920208802740b280120991f59f3908
Add test case description and task file for TC050
JIRA: YARDSTICK-297
Change-Id: I8030ba5a09f80db1e0a87a7650f08b944f281613
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
|
|
Project: yardstick 147ef861038a8a9b17c828c201d6fceab9feb565
Create Bash Sheel Utilities for TC052
JIRA: YARDSTICK-277
Change-Id: I4837ec865e73c3a77cd5edc076be15f3a0695617
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
|
|
Project: yardstick 8b41bad253d2bdae0ff0cb06dd406ab5b490dc61
Add test case description and task file for TC051
JIRA: YARDSTICK-296
Change-Id: I2628cb6e6b2ed1dcfa399e8641675666e50e4232
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
|
|
Project: yardstick c79631df20d785bf753db133ddba89bca028a0cd
Add grafana config for TC072_Network Latency, Throughput, Packet Loss and Network Utilization
Change-Id: Ib174401066f3a776f049f06d5d2502b034f4d984
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 041cef5e239fef75ea6a972ef6960031b32c9b1c
StorPerf Integration
Change-Id: I34a44111078efe50b1dbbaddda72474d25aafe43
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 3632b33d3720c156a03489527e53d1f47fff4883
Add test case description and task file for TC073(netperf)
JIRA: YARDSTICK-305
Change-Id: I21fa71fc956b8724c3d3b8cac12f16491596fe52
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 0bfb3e3ebad98eae4609e39d104a8e58d3b16f48
Bugfix: move plugin install/remove scripts to "scripts" directory
Change-Id: I0deb04c2e7e0908e8d28ace7ee8fdf27eec65917
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick e69a79aa8242bda326567e8ae514bd9acdcca91b
bug_fix tc045 ssh error caused by no id_rsa key file
this patch fetch id_rsa when prepare the env
JIRA: YARDSTICK-312
Change-Id: I9f172c4ec87a47143a63607dcb4725b86016605a
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: vswitchperf 93e3095b4d7ea6b850b81858ec7ae2c1caaf0448
dpdk: Support of DPDK16.07-rc5 and newer
DPDK 16.07-rc5 has renamed script tools/dpdk_nic_bind.py
to tools/dpdk-devbind.py. VSPERF was updated to use wildcard
in the script name, which is backward compatible.
Function get_version() from tools/systeminfo was updated
to correctly parse version information for DPDK v16. Version
name includes a minor version as defined inside rte_version.h.
It means, that for tag v16.07-rc5 VSPERF will show v16.07.0-rc5
in the report.
JIRA: VSPERF-333
Change-Id: I61a4ab2d90304fffdfc4d22a5cbf0cb7295402b3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Project: vswitchperf dad35a0c7a32fcbf0e96d1f9c96597c5f5f597a7
Integration docs: HelloWorld and other basic examples.
This patch adds to Integration docs some simple testcase examples
like a HelloWorld. The purpose is to show how to use some basic
features: rules on L3/L4 fields, MultiStream, Multi-VM setup.
Patch Set 2: removed trailing whitespaces.
Patch Set 3: moved the examples to the middle of the file to avoid
potential conflicts with the VxLan TC patch from Sugesh.
Patch Set 4: fix typo.
Patch Set 5: added descriptions on each example.
Patch Set 6: reworked description for VM Replacement TC.
JIRA: VSPERF-331
Change-Id: I9dea23c26138db874fd67f41d8de8a628db5d91f
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Project: yardstick a2ba9d0d6d2e44dcfeb7693bd0e4f728d5076f13
Update 03-list-of-tcs.rst for recent added tcs
Change-Id: I3af5bb5e8c6ea10f92666d76b78bd76865fe29ca
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick a86b9b49678b0fea6e7f7c920a8966aeef6721ee
bug_fix_parse_suite_wrong_installer_type
JIRA: YARDSTICK-305
Change-Id: I0224054e19c7bf764a9da1fc1fb7bed09dd40ef7
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 7d5d227ecb7163271cf1645d0affb0134f5ff039
Update test_suite files for TC055, TC072
Change-Id: Ib03708aeb1a90434cf6e2af45e9daae8621a6080
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: fuel 0c0cc4756e1e95b461da56d538e0dedd1052f0fe
Fix configuration for kvm scenario
JIRA: FUEL-157
Change-Id: I5baafd4395a2d298a24cccda042d5b43824ae7a0
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: yardstick 2d910fcc3ae6dbe42a21ae2faed53ea5abe9d787
Add HA Test Cases in Test Suite
JIRA: YARDSTICK-306
Change-Id: Ib91f7663c03df0bcfa4d823745324b29fffcf18c
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
|
|
Project: yardstick f6e130728193e576adc0e958a6df44229806300f
modify ha testing pod relative_path
Change-Id: I944f983a444b2315a39831bcb8e98e31b2f0b312
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 5de67659d25d132669c0b8725a73a34c417baa93
Bugfix: remove a redundant dash in opnfv_os-onos-nofeature-ha_daily.yaml
Change-Id: I4207ceeb5b461fb6fd612e6fe7d53ded5d44fb98
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 9e7b73ae4ee804e2647caad8278597e201e301d0
add grafana config for TC043_Latency_between_NFVI_nodes
JIRA: YARDSTICK-258
Change-Id: I0e30780722232859eecf17b178ac1cd133b1433c
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 14d31093898bb230ec951c9232949997625bab0f
Update test_suite files for TC069, TC070 and TC071
Change-Id: I5015835a13d17973c64186b742562e9cf165c427
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|