Age | Commit message (Collapse) | Author | Files | Lines |
|
When bootstrap cache is present, the cached id_rsa keypair is
copied to Fuel Master node after the initial packages are installed
(cobbler pp copies id_rsa.pub as /etc/cobbler/authorized_keys).
This leaves behind out-of-sync cobbler configuration, generated from
the fresh id_rsa.pub instead of the cached one.
While at it, also fix Fuel Master authorized_keys from ~/.ssh, which
is transferred via /etc/nailgun/settings.yaml to deployed nodes,
leading to nodes rejecting subsequent key-based ssh logins.
JIRA: ARMBAND-188
JIRA: ARMBAND-190
Change-Id: I58b45c9522b16c7d05dafcd1acaff4b8cc30013e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Now Armband also patches test-vm with an updated x86 image in the
upstream repo, so we can disable patch-packages for cirros-testvm
during ISO build.
Since Armband can patch packages at the upstream repo level,
disable patch-packages completely.
JIRA: ARMBAND-200
Change-Id: I5531460c1dd18d94b680d40971713d090be8c353
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Sync sensitive packetary change with upstream [1].
Once validated in Armband, we should be able to also push [2].
[1] https://review.openstack.org/#/c/420815
[2] https://gerrit.opnfv.org/gerrit/#/c/23999/
JIRA: ARMBAND-185
Change-Id: I2aa28daf217e01a5cd905a77141903758d085de7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
[ Dan Andresan ]
- puppet: database: Fix Percona XtraBackup sync
[ Alexandru Avadanii ]
- disable all plugins;
- re-enable remote tracking;
- remove "Revert: Point to specific snapshot ...";
- patch context adjustments;
- obsolete "kernel-bump", linux-image-lts-xenial is now the default;
- network-checker iface state check now fixed upstream [1];
- fuel-nailgun-agent hugepage size should also check /proc/meminfo;
- fuel-nailgun-agent CPU detection for AArch64;
- nova AArch64 hugepage support is now upstream;
- obsolete Cirros Test VM direct kernel boot (by switch to AAVMF):
* f-l/0001-upload_cirros-Add-direct-kernel-boot-support.patch
* f-w/0001-direct-kernel-boot-for-cirros.patch
- rework m1.micro RAM size patch after puppet manifest split upstream;
- re-enable arch-agnostic plugins which were rebased in Fuel@OPNFV:
* f_yardstick-pluginbuild
* f_congress-pluginbuild
- do NOT retire MySQL SST provider patch series (nack: ARMBAND-186),
rebase (and keep for now) MySQL SST provider patches, as trying to
use xtrabackup-v2 revelead a regression since Colorado.3.0, and
these patches simplify troubleshooting a lot;
- AArch64: nova: libvirt: Use host-model cpu (ARMBAND-193);
- AArch64: nova: libvirt: Use pointer_model instead of use_usb_tablet;
- m1.micro RAM size insufficient for TestVM with AAVMF (s/128/256/)
- switch Cirros TestVM to AAVMF from direct kernel boot;
- backport nova libvirt driver fix for deleting instances booted with
AAVMF firmware from [2];
TODO (later):
- Include ISO build time fixes for cirros_testvm in Armband package;
TODO (ODL, later):
- test & revise leveldb patching;
- bring back Qugga patching for arm64;
- configure systemd service to automatically respawn;
[1] https://review.openstack.org/#/c/417373/
[2] https://review.openstack.org/#/c/357190/
JIRA: ARMBAND-29
JIRA: ARMBAND-32
JIRA: ARMBAND-63
JIRA: ARMBAND-88
JIRA: ARMBAND-116
JIRA: ARMBAND-118
JIRA: ARMBAND-186
JIRA: ARMBAND-193
JIRA: ARMBAND-194
JIRA: ARMBAND-195
JIRA: ARMBAND-196
JIRA: ARMBAND-197
Change-Id: Ia99022e364e61245d109cabab9d0ed7157b4d2f5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Dan Andresan <dan.andresan@enea.com>
|
|
JIRA: ARMBAND-192
Change-Id: Ia99fab2dc38e7e5f8372dedfadf9c807586e7080
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
|
|
JIRA: ARMBAND-184
Change-Id: I26a79ac6c4ec4314fb21fc55b43985488c1b5fde
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-184
Change-Id: Ie88d1d2a16cbce6987ac12f226e48acc1fc81d9b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Backport urgent fix [1] from Fuel@OPNFV to unbreak all CI
verify/build jobs in Armband.
[1] https://gerrit.opnfv.org/gerrit/#/c/26269/
Change-Id: Icf5a84b62eb39edd922ab98a45b2c26c478466f6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
fuel-mirror has been replaced by packetary and all its patches
we held in Armband are now obsolote as well.
JIRA: ARMBAND-185
Change-Id: I1b83501965394ea8080305428bad17c826c5cf42
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-184
Change-Id: Ibcc70205f0688ce43e27d6d1361d513f15b4576b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Backported from [1] and adapted for Trusty, since Armband
did not switch to Ubuntu Xenial / Openstack Newton yet.
[1] https://gerrit.opnfv.org/gerrit/#/c/23999/7/
JIRA: ARMBAND-185
Change-Id: I1dd2cec09aa1077a5779573bc54c01db93339ac9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Backported from [1] until we switch to Newton and sync again
with Fuel@OPNFV master.
[1] https://gerrit.opnfv.org/gerrit/#/c/25867/
Change-Id: I0972218eaf7aeb9cb435f6408e140b502fc1c0ed
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Upstream fuel-library bug report: [1].
Recently, CentOS released version 7.3.1611, which triggered a latent
bug in fuel-library puppet scripts related to differentiating between
6.x and 7.x major versions: 7.3.1611 is wrongly detected as 6.x,
leading to the wrong packages being attempted to be installed,
leaving nailgun server service broken on the Fuel Master node.
This change forces the match at the beggining of the version string
(e.g. "/^6.+/: {" instead of "/6.+/: {"), so the new CentOS 7.3.1611
no longer matches the condition for 6.x).
This patch will soon be obsoleted by the Netwon switch.
However, until that happens, we need to ensure CentOS 7.3 is not
breaking the deploy.
[1] https://bugs.launchpad.net/fuel/+bug/1649895
JIRA: FUEL-238
Change-Id: Iebda7e13d66191614c3552dacb6c80091215baf5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
We recently changed the location of the deploy cache artifacts on
Fuel Master, which failed to also update the bootstrap_admin_node.sh
harcodes.
JIRA: ARMBAND-172
Change-Id: I1244beca0b5f386efb7ae255fadb0ef69eb559de
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
fuel-bootstrap import expects all artifacts to be placed in the archive
root dir, so adapt our scripts accordingly.
Change-Id: I18ba5cb0f81b1193bc75067ec7c83367f45c0375
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- move cache dir on Fuel Master to /var/cache/opnfv, since /var/lib/opnfv
is deleted during env config;
- allow target image collection on environment deploy failure too;
- create cache directory if missing for bootstrap extraction;
JIRA: ARMBAND-172
Change-Id: Icca650e560913345303ca0430a4d8b38183aa0c9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-173
Currently only ha scenarios were successfully deployed on virtual pods
The default configuration is for ha scenarios and those have 5 target nodes
while on the noha scenarios there are 4. The noha scenarios failed because
it was trying to parse one extra node.
This patch modifies the dea and dha files for each noha scenario so that the
nodes are properly configured.
Change-Id: I360aeaf8dc92e0ff614367d47d74f6fa61ef2268
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
Change-Id: I2d30e72cf218251e1b823619501454a65006dd9d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
On arm64, JVM sometimes (~10%) crashes at the very start, due to
JIT issues in our openjdk8 package.
We can't really solve the JVM on arm64 issues in the near future,
so we will try to work around the issue by configuring the ODL
service as respawn-able (see [1] for more details).
Note: This is specific to Ubuntu Trusty (14.04), which uses upstart,
for Ubuntu Xenial (or anything else >14.x), which uses systemd,
a different, equivalent mechanism should be used.
[1] http://upstart.ubuntu.com/cookbook/#respawn
JIRA: ARMBAND-134
Change-Id: I0dc82e4a6d0cc485e981477e6a25dbad95db930b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-172
Change-Id: I9f549e0161d39d8f72fff698cfc26c164b0f10ae
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Add support for caching deploy artifacts, like bootstraps and
target images, which take a lot of time at each deploy to be built,
considering it requires a cross-debootstrap via qemu-user-static and
binfmt.
For OPNFV CI, the cache will piggy back on the <iso_mount> mechanism,
and be located at:
/iso_mount/opnfv_ci/<branch>/deploy-cache
TODO: Use dea interface adapter in target images fingerprinting.
TODO: remote fingerprinting
TODO: differentiate between bootstraps and targetimages, so we don't
end up trying to use one cache artifact type as the other.
FIXME: This is still a bit hacky in some areas, but we need it ASAP.
JIRA: ARMBAND-172
Change-Id: Iecd293db98c061325643cc61863a48f092bfd491
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Some leftover chars in https://gerrit.opnfv.org/gerrit/#/c/24901/
were keeping the deploy to work.
Also, the empty folder networks was added. This folder should contain templates
for virtual network config for the targets. For arm we don't need those so we
leave it empty for consistency with other projects and for avoiding changing
the deploy logic
JIRA: ARMBAND-122
Change-Id: Id33e2efacc3ff8d3754c8b29d4bebefd0b385c41
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
The current fuel arhitecture assumes that all the VMs
(Jenkins slave, Fuel master and Target nodes) are all on
the same server. There is code that allows the Fuel master
to be on a different machine, but nothing for the Target nodes.
In Enea-Arm lab we have a different server for each.
This commit also adds specific templates for a virtual pod in
the Enea-Arm lab.
Therefore, the following changes are done:
- The default libvirt URI is the machine on which the Target nodes are
- The parameter libvirtUri was added in the dha.yaml file for fuel master
- All virsh calls have "-c" option to explicitly specify the uri; this parameter
is set only when libvirtUri is explicitly set in the yaml file
- The scenarios dha override now point to the arm template files
- The network templates are not needed for ARM, as the network infra is provided
by the server on which the Target node VMs reside; the folder is added here
just for consistency
- The target nodes are created with virsh rather than quemu when the nodes are
not on the same machine as Jenkins slave (similar logic to what is done for
remote Fuel master)
JIRA: ARMBAND-122
FIXME: remove hardcodes for
- Network bridges from templates
- Default pool
- libvirtUri from scenario overwrite
Change-Id: Ibf4744e5593f5201550115397024fd8311696074
Signed-off-by: cristinapauna <cristina.pauna@enea.com>
|
|
|
|
JIRA: ARMBAND-169
Change-Id: I4dbcd044c6c146f541e8c005282a4e60af2c3c8a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Switch from deploy time building of leveldb + leveldbjni to
using a prebuilt artifact, shipped as a DEB package from Armband
repos.
JIRA: ARMBAND-114
Change-Id: Ic7a52c78e803c1a6ebda1f127774959a0880a5a3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Packetary solves "libasound2" with "liboss4-salsa-asound2" from universe,
leading to openjdk failing to install.
Work around this by altering recently introduced packetary-driven local
mirror build to include OPNFV plugin deps into the "main" package list.
JIRA: ARMBAND-167
JIRA: ARMBAND-35
Change-Id: I040a7117c7ae809933a400ae00937ab8fcc1ea0e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
We need to explicitily add our Armband leveldb patching prereq
tools, like maven, git, make etc. to the ODL plugin's packages.yaml,
so they are included in the offline Ubuntu mirror.
While at it, also add openjdk-8-jre amos version additional dep:
- libasound2
JIRA: ARMBAND-167
Change-Id: I17fa7a4727b8a553f5a46ab13267380a8864c728
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Previous commit (bcdc1eaa74d5efd5f8c80600fb30d722bae9a421) confused
the URL of the local Ubuntu mirror with the local MOS mirror.
JIRA: ARMBAND-35
Change-Id: Icfb68e88e61c238cf650b84b269d16f9a52f9f26
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
When deploying via Jenkins CI, the repos used for target image
building are overridden to use the local Ubuntu mirror on Fuel
Master instead of fetching packages from internet.
However, when deploying manually, only bootstrap image building
benefits from the local Ubuntu mirror.
While keeping the internet mirrors, add the local Ubuntu mirror
to target image build repo list.
JIRA: ARMBAND-35
Change-Id: Ibd58067703ce6370781a6b54fd01ce52e29686ac
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
During the previous attempt to fix the local mirror rebuild by
reworking `atp-ftparchive` configuration, we removed the arch
list from the main configuration, which led to the local Release
file missing "Architectures" entries.
This led to "/etc/fuel_openstack_arch" not being populated,
binfmt not starting on the first boot, and bootstrap build failing.
Bring back the "Architecture" config line to restore the old
behavior.
JIRA: ARMBAND-163
Change-Id: Ica64fcd60ed4e0185d2cab5457603b42d3d55af8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
NOTE: Temporarily patch "packetary" in Armband until we upstream
two small fixes.
Bootstrap build, deploy target image build:
- Switch from public Ubuntu mirrors to 10.20.0.2.
JIRA: ARMBAND-35
Change-Id: I14645cfeebb486063e7b8198de273f68285b11cd
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-96
Change-Id: I28ab3030d3f31c5734508838985412a33334570a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: ARMBAND-163
Change-Id: I3fd5a8a826372afc323665abe229c7e67991e31a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Previously, fuel-plugin-ovs did not have a stable branch for Fuel 9,
but now it does, and since fuel-plugin-ovs/master was reworked for
Fuel 10, we need to switch to it.
v1 -> v2: Backported one patch that was not cherry-picked on stable.
Change-Id: I58467e441763b35e5296cb29433eb941e65eec3f
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Change-Id: I4c232fec4f35add7b04faf305cdf53dde70d7e92
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Slightly edit patch context to match upstream changes [1, 2].
[1] https://gerrit.opnfv.org/gerrit/#/c/22559/
[2] https://gerrit.opnfv.org/gerrit/#/c/21823/
Change-Id: Ibdb3b557f3e482f74d345a1e0e1eedda26879179
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Armband does not yet have DEB/RPM repo snapshots, so revert
upstream Fuel@OPNFV change enabling them.
JIRA: ARMBAND-155
Change-Id: Ib08c36bf28a66ef38d8b33031dcbf363fb34123c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Now that [1] has been merged, we should stick to upstream behavior.
[1] https://gerrit.opnfv.org/gerrit/#/c/22975/
This reverts commit f653f97dd2591f4cd5bcb4e76eb2134a93f6d460.
Change-Id: I5f23dd6e1b113e8a7d06995e479287ff196410dd
|
|
While at it, also upstream:
"build: Use OPNFV_GIT_SHA for ISO preparer ID"
JIRA: ARMBAND-146
Change-Id: Ifcd7b3041d172aa492e26477c0872cd96efd90ba
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Fuel Master VM template has been updated to use:
- 4 VCPUs (was 8 VPCUs);
Related-bug: ARMBAND-98
Change-Id: I1a587f0efa06850885ff8cf938ebb9775af8f7a8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
We recently removed blacklists for a few mirrors, on account
of upstream Fuel@OPNFV fixing mirror selection in [1].
Although the mechanism will be polished a little, it works very
nicely; pointing us to [2], where we seem to trigger some flood
protection at sync, leading to dropped connections and failed builds.
Keep using the official Ubuntu Archive mirror [3] until we sort this out.
Fixes: ARMBAND-136
[1] https://gerrit.opnfv.org/gerrit/#/c/22195
[2] http://mirrors.se.eu.kernel.org/ubuntu/
[3] http://archive.ubuntu.com/ubuntu/
Change-Id: If9247f829ee314d4c71dafa84b6cd13b384484f0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
While refactoring the patching mechanism, take care of:
- Sync submodule handling with Fuel@OPFNV;
- build: Investigate/prepare for moving patches to Fuel@OPNFV;
- build: Investigate divergent fuel-mirror;
- ISO build: cacheid for Fuel comps should not depend on
Armband git commit;
CHANGE:
Rename/shuffle patches while grouping them in "features",
preparing for upstreaming them to Fuel@OPNFV and beyond.
CHANGE:
Allow linking patches for better representing the dependency
between one patch and different features.
e.g. 0001-Add-arch-to-nailgun-release-and-target-image.patch:
- part of `multiarch-fuel`, because it extends Fuel;
- part of `direct-kernel-boot`, as arch is required for that;
- part of `cross-bootstrap`, target image is arch-dependent;
NOTE: Patch links are not staged to Fuel@OPNFV, they only serve
as markers that a specific patch is part of a feature.
CHANGE:
Kill all Fuel component submodules, now handled in Fuel@OPNFV:
- fuel-agent
- fuel-astute
- fuel-library
- fuel-mirror
- fuel-nailgun-agent
- fuel-web
CHANGE:
Move armband-fuel-config.mk to armband git root.
FIXME: m1.micro-Increase-profile-RAM-size-to-128MB.patch is NOT
part of `cross-bootstrap` feature, but patch context says so ...
FIXME: 0001-Add-arm64-deb-repositories-setup.patch is broken at
`make patches-export` by removing spaces at EOL.
v2 -> v3:
* Phony patch support (links to show a patch belongs to a feature);
* Updated README.md
v3 -> v7:
* Re-export Fuel submodules & plugins patches (update patch context);
* Update Cavium mail addresses (s/caviumnetworks.com/cavium.com/);
* Ignore submodule changes;
* Add armband git repo info to gitinfo_fuel.txt at build time;
Implements: ARMBAND-136
Closes-bug: ARMBAND-95
Closes-bug: ARMBAND-93
Closes-bug: ARMBAND-92
Change-Id: I1a236d9f43b2e6dca22055911f696b43c22b5973
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Since we are now building inside docker containers, it is no longer
necessary to use `python-debian` from pip repo instead of Ubuntu.
Also, since Fuel@OPNFV improved our mirror selection in [1], we
can drop our custom blacklist entries for Ubuntu SE mirrors, as
well as repeating the repo mirror build in case of failure.
[1] https://gerrit.opnfv.org/gerrit/#/c/22195
Change-Id: I62890b6ae7977cd8a39c06ce17c8964e6cb1dddb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: If6a3472a2f8fe64db2469536fe4d12d88e7a61f0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|