Age | Commit message (Collapse) | Author | Files | Lines |
|
Project: fuel 7cff3184b3cefae5894eeef78bb3490818bc8141
deploy: Delete old Fuel env if present
In order to clean up old partitioning and boot entries on target
nodes, before removing the Fuel Master, try ssh-ing into it and
removing all environments/nodes.
This is especially important for EFI systems, where old boot
entries are left behind without a proper env delete, leading to
target nodes failing to PXE boot on Fuel Master re-install.
This change assumes that:
- all Fuel Master information is unchanged between old and new
deploy (fuel IP, password etc.);
- Fuel Master is up and running, in a sane state (target nodes
are also online), when deploy starts;
Closes: ARMBAND-51
Change-Id: I7b61124ea9182ce2d599adcdedef03e0d8d67ed6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Most likely, when we configure an additional interface for Fuel
Master, and Network Manager is restarted, our old ssh connection
is timed out and needs to be re-established before checking
for fuel bootstrap process via ssh.exec_cmd.
Change-Id: I44589b2e8190008c8b1035d171cbb50270dfd98c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Armband build benefits (or should have) of a local mirror
for "linux.enea.com", which we used to inject into the build
system by host's "/etc/hosts".
After Armband switched to building inside docker, this change
was silently discarded by containerization.
The proposed solution uses hosts's network stack in all build
containers.
See [1] for full description.
This change simplifies the network abstraction during build by
NOT containerizing the containers' networking.
The original motivation was pointing to local mirrors via host's
"/etc/hosts", for which an alternative solution could be passing
"-v /etc/hosts:/etc/hosts".
[1] https://docs.docker.com/v1.8/articles/networking/
Change-Id: I31e3c787a432af49b4799f561669a0150668b222
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Ic584d9b1eb179009256de8ccacfb7669976823c6
|
|
Project: vswitchperf b2289e1f6abab2d807eb55d9ec868039dc2384e2
pkt_gen: MoonGen Incorrect RX_MBPS Calculation
Misplaced parenthesis regarding THROUGHPUT_RX_MBPS
JIRA: VSPERF-381
Change-Id: Ie33cf6ca88164f0686a819715b5f9f7409072063
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Project: fuel a0f0fb312899a44e80ec0339a44497b6e1c94bff
deploy.sh: accept a timeout flag (-T)
Original work by Josep, signed by me (Alex) for upstreaming only.
Change-Id: I58a7b9bc639bb03b994ea34fc317f5679140d9fd
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 24fbcdb907ad584d4333a3428d06eff9ef7a2d5f
build: cache: Allow LOCAL_CACHE_ARCH_NAME override
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel d4f2f2a03cc7c6e0b9af49d18cc9c08c68306ca5
build: Allow PLUGINS override
Instead of using BUILD_FUEL_PLUGINS, which was intended for manual
overrides of the Fule@OPNFV plugin list, allow PLUGINS to be
preset to a custom list, which we will provide via Armband
Makefile spec.
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
build: Allow MIRROR_MOS_UBUNTU override
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel ad0dd57dc045b58c46e53f281ab57e70d00947d7
Script updates for CI job
Due to the redesign of the SFC feature test, the poc script became
part of CI job functest-fuel-baremetal, scenario os_odl_l2-sfc-ha,
there is a need of full uplift to colorado.
Changes:
- GPG keyserver use (line 61)
- patch updated fixing the debian package dependency issue
(python-oslo.messaging-)
- some typos are fixed
- OpenDayLight address is read from hiera (management vip)
Change-Id: I4a19ec753a575220cf321819ab4ff2d9433ec16c
Signed-off-by: ferenc Cserepkei <ferenc.cserepkei@ericsson.com>
|
|
Now we can kill fuel-astute submodule.
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Decouple main Makefile and repository patches by moving all Fuel
component patches to a subdir, <patch-repo>.
Proposed structure of <patch-repos> dir:
- patch-repos/*.patch are intended for <fuel-main> git repo;
- patch-repos/build/repo/<fuel-module>/*.patch are intended for
<fuel-module>, e.g. "fuel-nailgun";
Full list of Fuel submodules supported by this mechanism at [1].
While at it, replace all occurences of </tmp/fuel-main> with
<FUEL_MAIN_DIR> in main Makefile and rewrite a few git/make calls
to use the "-C" arg.
NOTE: `git -C` is available starting with git 1.8.5.
ARMBAND NOTE: This patch will allow us to streamline the process
of moving patches from our repo straight to Fuel@OPNFV.
[1] https://github.com/openstack/fuel-main/blob/stable/mitaka/repos.mk
#L32-L44
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: vswitchperf cd22516b0f625e87ef100a7937d3ba9ba8f155e7
docs: vloop-vnf changelog update
Documentation was updated to reflect recent changes
of vloop-vnf image.
JIRA: VSPERF-374
Change-Id: I65a34a7618593a7b77c38eb2fa4c87619b937346
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Project: vswitchperf 0fb65d2afadad1f092788f5a4f251b09851b3ae7
Vanilla_Multi_Queue: Add vanilla ovs multi-queue functionality
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: I854bedd7dd61cf10239f8592336a86b92d78d0bc
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Change-Id: Ib676747252ef647d9385cb0eeeca9563b7fd09d7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 93839f90bf2be3f4aec3103c1c3bcca1d4a29c30
[DOC] Do not create mailto link for Fuel@OPNFV name
Change-Id: Ib130e8a2440531c3b9c484c9e516c72d5b20301b
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel c82fb21ae0237116600c68ef6017dd470965c6b8
[ODL] Fix odl deployment on separate node
JIRA: FUEL-185
Change-Id: Id14d30154b63abc915a0cd55835bb72cee862dde
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: fuel 087c8de9c667b28506b7621d5147be4846c06397
Final updates of the Installation instructions:
- Images updated
- Updated reference URIs
Change-Id: Ieeefbd8a3ef9bbd6c3a0e767f770097ab8a98f9d
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
|
|
Project: fuel 9f00e08b54ac2be36e6315adc3bd29f7e3bd40d8
Final Updates of the build instructions
- Updated references
Change-Id: I2a6cfdec0de6afa41ea8af59f415439b7ab7056d
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
|
|
Project: vswitchperf bd8712a917d9a0c7272506fd85816f857c32529e
guest_drive_type: Adds guest drive configuration options
Adds boot and mounted drive configuration options.
JIRA: VSPERF-379
Change-Id: Ic0673a9b9f7a3430d7ac4db5fb9bf4228872f501
signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: Id89153e39e9c163df77e275ed4526961d6800d3c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel ae8196be2c5863a5ca837828eead7188d608023d
Fix ovs scenario configuration
Due the incorrect indentation install_dpdk option was not set to true.
JIRA: OVSNFV-37
Change-Id: Ida3b0d1e72ce8322905ff399af89b43cac878299
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Backport fpb change submmited in [1].
[1] https://review.openstack.org/#/c/311031/
Change-Id: I02ce8c6151799e3953587fce50cbe552a5c95c50
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: vswitchperf 1ea5c5239f9003f9cb8492f1d5b00a75724a7180
cuse: Remove vHost Cuse support
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
Our deploy slaves are running CentOS, which only has git 1.8.3.
git -C option was made available in git 1.8.5, so instead of
installing out of repo versions of git on all our deploy slaves,
rework the main Armband Makefile to NOT use this option.
NOTE: --git-dir could be used instead, too.
Change-Id: I29b9c720e39cae25431cf1176dbaddce5bda2a35
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
See Fuel@OPNFV change [1].
[1] https://gerrit.opnfv.org/gerrit/#/c/19033/
Change-Id: I9c95a7aaec366c9e03620f1129b3cb8401385476
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: fuel 08526c7376ee1b155dfb51f164f46f14f4ec6e52
Changing ODL change into FUEL_PLUGIN_ODL
Some users where confused if the change we are doing
here is a change to ODL or the fuel-plugin-opendaylight.
So renaming helps for more understanding.
Change-Id: I886d7be3db995f37f9451c06ee22c16d540254e1
Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
|
|
Since arm64 support has been proposed straight upstream [1], we
no longer have to keep the git submodule for the yarstick repo.
[1] https://gerrit.opnfv.org/gerrit/#/c/18883/
Change-Id: Ic8a02106ed1d26012a0767fc0444b8f8d35c54aa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: yardstick 27e254c2273e4be503053db882948b8abf53b269
Add grafana config for TC074_Storperf
Change-Id: If415a6e6170c52f3586a1521f6f239daad3d527c
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 0e9572495a707215f5e43a1b1f5c850b6f159e98
add doc about scenario suite help
Change-Id: Ib8dfc56e8b84cdba04fc18f13ac780b2103c0b5d
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 025432b9fa0bc6061ab34a71f0f28bdec4cf7641
add grafan config for ha test cases tc045~tc049
Change-Id: I1adc9ab36a71195e7c03fe4f3b7322ea40aa2a40
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 94c16e0c5a7589951aea3fb9ff4dd01f37a327f4
Add grafana config for TC069_memory_bandwidth(RAMspeed)
Change-Id: I06ac3df77f35b14746a4b07ebc16d46dc83624c1
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 3118c2402c97657547ec2afd387498cba4cc91cc
Add grafana config for TC071_Network Latency, Throughput, Packet Loss and Cache Utilization
Change-Id: Ica0431df75628f08eb2ba558681c5740a038ab1d
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick c5c3634a7252928998e026191671038f54dca5f6
Add grafana config for TC063_StorageCapacity
Change-Id: Ib960e249770902b57d65fe9fe811c1565a5dc867
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick 9219667892ae778aa6f9ea1ab29efc6923e6c5f3
bugfix: storperf not use expect
Change-Id: I64af691ef25e61aeaa106e6662152dc46326c3f0
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick bd97bf5dddf4411c6c51939b55ef19c985d526cd
Restructure user-guide
Add 09-result-store-InfluxDB.rst
Update index.rst for 09-result-store-InfluxDB.rst
Change-Id: I44e662db07e206e58812d7a997036936a95b5137
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Project: yardstick e5a2154bf5c2a18c661fa3fba540c172f177dec1
bugfix: storperf scp do not work
Change-Id: I4d6441dff2afddb2290f4855f714d811e8394a51
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: yardstick 6234e5e4edca9a92322fb0eb0aaf625291a42a7a
add starttime stoptime for mongodb
Change-Id: Ia818d37f12af4576b98c578d819df0bb0998c154
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: fuel c71b57140fdbadfb4c1f39bf0e2df99403820ddb
Claenup
Remove the workaround marked by "# fix me" mentioned in commit id:
e8928f93b50df3ecb11942ab754bae848c082c6a, since the issue (some files
generated during kvmfornfv building are owned by "root") already
resolved in fuel-plugin-kvm build process.
Change-Id: I5efb60173b9974f6fba25f04da1f4b1f53207b1a
Signed-off-by: davidjchou <david.j.chou@intel.com>
|
|
Project: fuel 8580caa96234cdda3f7c4cf4a5965a0fd411fce0
[KVM]Add support for Broadcom NetXtremeII 10Gb
This NIC is used on Ericsson CI POD2
JIRA: KVMFORNFV-45
JIRA: FUEL-171
Change-Id: I44576b399b6195ccc1e64dfc0b04e239ced8acc7
Signed-off-by: Michal Skalski <mskalski@mirantis.com>
|
|
Project: yardstick 1a884e81e8ea3779f63122b3af844011d8a1d421
bugfix: serviceha do not provide result to influxdb
JIRA: YARDSTICK-320
Change-Id: I94cdc2cc9f4f356484d49916d2c67bac61e38967
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
|
|
|
|
Previously, Armband Makefile used to call Fuel@OPNFV Makefile
target <iso>, instead of <all>, which resulted in bypassing
using Docker for ISO building completely.
Switch to <all> Makefile target, hence bringing back Docker
as a build container.
This change justifies moving make variables to a separate spec
file, armband.mk.
While at it, enable caching of builds.
This requires Jenkins bash scripts to be updated for the ISO
build job, done in [1].
JIRA: ARMBAND-56
[1] https://gerrit.opnfv.org/gerrit/#/c/18453/
CHANGES:
- all: release (was all: build)
- Common make targets now depend on submodules-init;
- clean-build and clean-docker make targets have been replaced by:
make clean, make deepclean;
FIXME: These issues should be fixed later:
- (optional) trim local repo paths from gitinfo files
- only account for armband submodules in cache fingerprints;
- identify size mismatch culprit
Change-Id: I7d73409be44983fa21d4c09d2e07b87a33231e03
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Project: yardstick 4afe3795d72295ff181853fc9e6602e98ddf608b
remove previous pod suite yamls to avoid confusion
Change-Id: I312aae7fbc34ddeb9480abfb18c40853fcc9f5c1
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
|
|
Project: fuel e7f7abc89161441548545f79f0299610c6e5b203
Tune up virtual envs
* increase the memory/cpu of controller for noha case
* reduce the memory of computes
Change-Id: Iea9351bb846823fae64a662e92f894eca2f6cecb
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Project: fuel db1f756252f60e038fabb2290848651996569bd8
[ODL-plugin-update] Adding more memory to java vm
When running functes ODL crashes in the middel
and is not starting again. Investigtion
showed that it is due to insufficient memory
of the java vm.
Change-Id: I18cda9ed5bed91e72fd91aaf0efa02c5e1a3c8d1
Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
|