aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-07-18fuel-astute: Erase EFI boot entry on EFI systemsAlexandru Avadanii1-0/+43
On EFI-enabled systemd, grub-install from grub-efi-* package installs a boot entry named "ubuntu". Since this boot entry is saved in board flash memory, erasing the MBR bootloader code and/or partition signature will not clear the ubuntu boot entry, leaving it pointing to a loader on the ESP (EFI System Partition) that will try to load the kernel/initrd from an erased partition. In Fuel 8.0, the whole disk was erased, so the ubuntu EFI boot entry was skipped due to missing ESP, while for Fuel 9.0 and above we have to explicitly remove it to keep the system in a sane state. Note: efibootmgr is installed automatically on EFI systems as a dependency of grub-efi-*. Closes: ARMBAND-47 Change-Id: If715e960dfd96df807abb0e26f4b7604624ac408 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-18submodule: Add fuel-astute.Alexandru Avadanii3-2/+8
Change-Id: I6362dbdfabe9f3fa0d371b3ad3a6c2c6d139b684
2016-07-18Updated armbandGuo Ruijing1-0/+0
Project: fuel 264623809055c5ade26fc615d1255302f0b7c305 Update fuel yardstick plugin 1. update fuel plugin builder 2. change install directory in yardstick plugin 3. update README Change-Id: I8d717ef568aeaa7958cd1a3161d4ef8ca17a1de1 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-18Updated armbandliang gao1-0/+0
Project: yardstick 3a3ccbd79d47333ce7626674c68a4cdfac44020d change ci from base-on-pod to base-on-scenario (in progress) 1. first need to change in yardstick 2. then change in releng to modify the input parameter JIRA: YARDSTICK-299 Change-Id: I3d707721acbc1d63be34da4e98138f845dc93466 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2016-07-18Updated armbandliang gao1-0/+0
Project: yardstick 428c72a39bde85d29fae024e1f3d38f5a177f292 throughput between nodes (in progress) JIRA: YARDSTICK-256 Change-Id: I48d66081dcfabf4462ef1ff15c9a3ad28132aaf9 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2016-07-16Revert "Bugfix backport: sysctl.conf vrouter namespace"Alexandru Avadanii1-54/+0
Merged upstream. This reverts commit 31087865b416f0eab066377c76a0d580d3fd8bd1. Change-Id: I60bd902207bb35e244e0e10646226d9f611bd68a
2016-07-14Bugfix backport: sysctl.conf vrouter namespaceAlexandru Avadanii1-0/+54
Upstream bug report [1], proposed change backported from [2]. Temporary backport proposed fix until fuel-library merges it. Currently net.ipv4.ip_nonlocal_bind is not set inside vrouter namespace. This can lead to deployment failure with p_dns error: ocf-ns_dns: INFO: dnsmasq daemon is not running ocf-ns_dns: ERROR: dnsmasq: failed to create listening socket for 10.109.5.1: Cannot assign requested address ocf-ns_dns: ERROR: Error. dnsmasq daemon returned error 0. We had very similar issue in the past: https://bugs.launchpad.net/fuel/+bug/1500871 We need to add ocf_run $RUN_IN_NS /sbin/sysctl -w net.ipv4.ip_nonlocal_bind=1 To get_ns() in ns_dns and ns_vrouter [1] https://bugs.launchpad.net/fuel/+bug/1595957 [2] https://review.openstack.org/#/c/334415/ Change-Id: Id8d3a2e58de4dccc9a79536bd443294e085f70ff Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-14Updated armbandMaryam Tahhan1-0/+0
Project: vswitchperf f35edfc71ee92d67e6cb587b116b64c3a005ac71 dpdk: Support of DPDK16.07 DPDK 16.07 changed the default log level of DPDK enabled applications. Detection of the end of OVS initialization procedure has been changed to work for various DPDK versions and for both DPDK and Vanilla OVS. JIRA: VSPERF-316 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-07-14Updated armbandGuo Ruijing1-0/+0
Project: fuel dfda6c2155a647bd78467c6cc8926c5d9c3a3234 Add fuel collectd ceilometer plugin Change-Id: I2f95d9166e2d0d7508551de8b87dc6c84800e3c1 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-14Updated armbandliang gao1-0/+0
Project: yardstick e6277570188829687b2ecf48adbd10bc3c9d46bd Add test case description and task file for TC049 JIRA: YARDSTICK-295 Change-Id: I9c13bee1bb986f515f4bc41e4455176240e2f19d Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
2016-07-14Updated armbandliang gao1-0/+0
Project: yardstick 086bd65535027be14a23b4296539900b0220c1b6 Add test case description and task file for TC048 JIRA: YARDSTICK-294 Change-Id: Ie6a9271a4cbc81bce47f7f59e609b90a9de1e909 Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
2016-07-14Updated armbandliang gao1-0/+0
Project: yardstick bd67f539aa7ad9a659b7d945942e1eeda96c45d7 Add test case description and task file for TC047 JIRA: YARDSTICK-293 Change-Id: I23a0e78a297cdc5742fa8d1234e6f271e076f359 Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
2016-07-14Updated armbandliang gao1-0/+0
Project: yardstick 0f1b872b3bbff6e0f2c8d56f3037064206dd068d Add test case description and task file for TC046 JIRA: YARDSTICK-292 Change-Id: I552c8357bd9378bea70a12872497d09711c91eef Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
2016-07-14Updated armbandkubi1-0/+0
Project: yardstick e416cdd3339ca283216e7af9a162641534360e52 bugfix:fix all generic test cases in grafana update the pod name and scenario name, and extend the duration of graph JIRA:- Change-Id: Ic611dc8d49e666433c2191c4098d56d95d40f1af Signed-off-by: kubi <jean.gaoliang@huawei.com>
2016-07-13fuel@opnfv: honor pod's interfaces/transformsJosep Puigdemont1-0/+85
Change-Id: I493279d81b32a58b918f2b6caa0cf869a0caa674 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-07-13Updated armbandGuo Ruijing1-0/+0
Project: vswitchperf 8494dca647761592d7dd822849e56546f107dcb1 Update fuel plugin builder installation Change-Id: Ife16738ea8717749c52e950404257936994fe273 Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-13Updated armbandMartin Klozik1-0/+0
Project: vswitchperf 555c74d4aff580b8115d6e79ee985af9a986ff94 docs: Update yardstick userguide Documentation update based on review comments received after the merge of original patch. JIRA: VSPERF-288 Change-Id: I86305fa064cc07e2e0797276a7b89b1d4b23d126 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-07-13Updated armbandMichal Skalski1-0/+0
Project: fuel 3647eb632066358736b55cd79a799e1a20a8e38e Update NSH patches 1. update patches from commit 307b06d Change-Id: Ibaba101833a934840b4491925ff944f1420fce2e Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-13leveldb: Use odl_package var for ODL pkg version.Alexandru Avadanii1-1/+1
Change-Id: I220b364d2aecc5e08b3c90c451acf26e5d8ea0d7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-13Updated armbandGuo Ruijing1-0/+0
Project: yardstick 55e2e867e9a3f01b39f619251253470948e250d4 Update README in fuel plugin Change-Id: Ice5e394ebdd734b10833b90e84427601fec173ad Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-12Updated armbandStefan K. Berg1-0/+0
Project: fuel d4ae056501ed0778a19beb6f207c00439f95cff3 Aligning machine type over Ubuntu and Centos We have previously used "pc-1.0" as the qemu-kvm machine definition for virtual Fuel deploys. On Ubuntu this points to: pc-1.0 Standard PC (i440FX + PIIX, 1996) On CentOS 7 this machine definition does not exist, but there's a match in "pc": pc RHEL 7.0.0 PC (i440FX + PIIX, 1996) (alias of pc-i440fx-rhel7.0.0 So, finally, pc is also in Ubuntu: pc Ubuntu 14.04 PC (i440FX + PIIX, 1996) (alias of pc-i440fx-trusty) This change is about exploring whether moving to "pc" will make the auto deploy work on both platforms with the "pc" machine type. What still needs to be done in CentOS is to create a symlink from /usr/libexec/qemu-kvm and /usr/bin/kvm though. Change-Id: I1cce52a21075950cb59b75709b12d724d759e3e6 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-07-12Merge "Fuel VM: set virtio cache to writeback"Alexandru Avadanii1-1/+1
2016-07-12Merge "iptables: Move SSH rules to post-scripts."Alexandru Avadanii2-3/+48
2016-07-12Fuel VM: set virtio cache to writebackJosep Puigdemont1-1/+1
Change-Id: Icbbba0bee68a8fe9de76dbf3c339e01da43fb3a2 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-07-12iptables: Move SSH rules to post-scripts.Alexandru Avadanii2-3/+48
Previous change [1] introduced the addition of an iptables rule that was supposed to allow SSH access on all ifaces (not only admin iface) when additional ifaces are configured. However, Fuel installer is flushing the rules after transplant adds our SSH config, overwriting it. Move iptables SSH config to post-install section, as standalone script. In order to keep the same behavior, test ifcfg-eth0 (admin interface is expected to be called eth0 by convention) for "DEFROUTE=no" and only whitelist SSH on all ifaces if it matches. [1] https://gerrit.opnfv.org/gerrit/#/c/16571/ Change-Id: I086b75461daa62671cad10494fe34acfd77757ae Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-12ODL wget: --no-check-certificate for local cache.Alexandru Avadanii1-0/+42
Change-Id: Idbc45b4d1aeddf5450b756d23faf56c95fccc975
2016-07-11Merge "transplant.py: Allow SSH on all interfaces."Alexandru Avadanii1-5/+3
2016-07-11dea_base: use grub-efi-arm64 instead of grub-pc.Josep Puigdemont1-0/+22
Change-Id: Iae462ebe89ff3bc351addd12a8f5cc5ecdef2b11 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-07-11Updated armbandliang gao1-0/+0
Project: yardstick cd9d1296ab33b0193bfd37e77241291065d9a06b Update fuel plugin 1. update fuel plugin builder 2. change install directory in yardstick plugin Change-Id: Ice560955bb659ca86476b9dd02b3028b853ac01c Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
2016-07-11Updated armbandMaryam Tahhan1-0/+0
Project: vswitchperf dd47e4e2ea55f01235c20bed8e07d69fb51c292e Enable BURST_MODE for l2fwd JIRA: VSPERF-267 This change adds optional burst mode to l2fwd module that makes use of skb->xmit_more API available in Linux Kernel > 3.18 in order to batch transmission of packets out of the NIC, increasing forwarding performance significantly. By default burst mode is disabled. If a value greater than 1 is provided, burst mode is enabled to send that many packets at once. Typical values would be burst=8 or burst=16. Change-Id: I8ef5f86cf73d4cb5a8e4c618a86111ebf411dca8 Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com> Signed-off-by: Mallesh Koujalagi <malleshx.koujalagi@intel.com>
2016-07-11Updated armbandliang gao1-0/+0
Project: yardstick 567694e4db2d0776db6c115b98f54a4737e52124 Creating Director and related codes. Add a new scenario type 'ScenarioGeneral' that support orchestrating general HA test scenarios. Director, ActionPlayer and RollbackPlayer are uesed to execute the test scenario (or test flow). JIRA: YARDSTICK-288 Change-Id: Ied2ccd4712f3c3efde6771bfa4538c1e9e137c11 Signed-off-by: lihuan <lihuansse@tongji.edu.cn>
2016-07-11Updated armbandkubi1-0/+0
Project: yardstick de26decf97c64b4a9a624d0acbf3882af4916f39 Bug fix:change pod name and extend graph duration Because there were some change with community pod name. We need to change it with new pod name so that all the result could be shown in the grafana JIRA:- Change-Id: I584294a5ead4337160c1ce2fcca8a53901f03a07 Signed-off-by: kubi <jean.gaoliang@huawei.com>
2016-07-08Merge "patches: removed patches upstreamed to fuel@opnfv"Alexandru Avadanii2-192/+0
2016-07-08Updated armbandMichal Skalski1-0/+0
Project: fuel f7f13befab5bf9a585f4f24018fd9561ed61b1ae [BGPVPN] Do not include temporary files in plugin Change-Id: Idd2e2f403a2dd5be44c480e8b493e4281ade1994 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-07-08patches: removed patches upstreamed to fuel@opnfvJosep Puigdemont2-192/+0
Change-Id: I2cd1899d82878dfece22ed546e1ff24d5387e8c1 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-07-08Updated armbandMichal Skalski1-0/+0
Project: fuel 16ea7e06170ba0bb62a164de5b33f19ccd1b1d12 deploy: ISO rebuild: use -joliet-long names. Armband adds similar files, which tend to have long names and only differ in suffixes (e.g. DEBs for amd64 vs arm64). Previous change [1] fixed ISO build errors, but failed to address the deploy.py ISO rebuild (which modifies and recreates the ISO, calling mkisofs, which complains about clashing file indexes). This works around ISO rebuild error(s) like: "genisoimage: Error: ./ubuntu/pool/main/g/golang-gogoprotobuf/golang-gogoprotobuf\ -dev_0.0~git20150828.0.6cab0cc-1~u14.04+mos1_arm64.deb and ./ubuntu/pool/main/g/golang-gogoprotobuf/golang-gogoprotobuf\ -dev_0.0~git20150828.0.6cab0cc-1~u14.04+mos1_amd64.deb have the same Joliet name" [1] https://gerrit.opnfv.org/gerrit/#/c/14973/ Change-Id: If58a18ba46343a52ce6e9a0a6a0482c1a3079451 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-08Updated armbandMichal Skalski1-0/+0
Project: fuel 7c600840185d9b454c1995e35a9704db823fb5c6 virtual_fuel: prepare class to allow multiple bridges The VirtualFuel class has now two new methods: del_vm_nics: Deletes all interfaces from the VM. add_vm_nic: Adds a NIC to the VM, attached to the specified bridge. The following method has been deleted: set_vm_nic: implemented with the two new methods Apart from the deleted method, no functionality has been changed. This is just a small but necessary step towards adding support for configuring more than one NIC in the fuel VM. Change-Id: I9f02c8163dfb9768510e78d5d5e77a0bb43306fb Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com> deploy: add support for multiple bridges deploy.py: Some Fuel VMs may need more than one network interface. To be able to provide that, we now allow the user to specify the "-b" paramter (bridge) multiple times, creating a new NIC for each one of them. The NICs are created in the same order as they are given in the command line. There is no change in behavior from earlier versions, pxebr will still be the default bridge if none is specified in the command line. deploy.sh: To reflect the new capabilities of deploy.py, we introduce the possibility to specify -B more than once in deploy.sh, and honor that when calling deploy.py. We also make it possible to specify a comma separated list of bridges, as in: -B br1,br2. Change-Id: I1a0100f2cfe755ec6adfeedafb391c2357f46f51 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-07-08Updated armbandMartin Klozik1-0/+0
Project: vswitchperf 64823f173b4fae6921bfde642fb68eac55a470ea yardstick: Documentation and YAML testcase definitions Yardstick supports execution of vsperf specific testcases. These testcases are specified by YAML files located inside yardstick/tests directory. Documentation describing yardstick usage and execution of vsperf testcases is part of the userguide. JIRA: VSPERF-288 Change-Id: I5a575d28d344e0f3e0a1c8434e2f3231fd312d31 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-07-08Updated armbandkubi1-0/+0
Project: yardstick f5acf5d40684080f1633a3c4eafebfe5e6ab69b1 bug fix for huawei-pod2 Since TC027 depends on specific pod configure, so it only should be run at huawei-pod1 JIRA:- Change-Id: Ib85daae64ce97cad907dbaa8309c80cf4f0153b5 Signed-off-by: kubi <jean.gaoliang@huawei.com>
2016-07-08Updated armbandMichal Skalski1-0/+0
Project: fuel f59b4e0786f11e2799990beeaf0e4a148c3572af Point to newer commit in ODL plugin repo Use small fix for setting ovsdb managers. Change-Id: Ie405d4a2db59ea490ff0a690bb310c0c74d8de79 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 55af4f473d60838b57b14670423717b7f2e901ea Enhence CPUload scenario Enhence CPUload to measure maximum, minimum and average CPU usage. Change-Id: I22d5e56a120ef6bb6ab93094bb053d9999173b32 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 65d32056b14f5f34c2aba186f7ccb3e34c67a9a5 Creating result checker classes JIRA: YARDSTICK-276 Change-Id: I63c4f2c36108e95f5d3b7da42e66cb8c9b16c817 Signed-off-by: lihuan <lihuansse@tongji.edu.cn>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 7b2923df78a0820df9e968ae1909d838c07ebd83 vsperf: Initial integration with VSPERF New scenario class allows to execute vsperf installed inside VM. Vsperf is executed in trafficgen mode. It means, it will only configure and execute traffic by external HW traffic generator based on custom configuration file. After traffic generator stops, then test results will be converted from vsperf CSV format into JSON and passed to yardstick for further processing. Currently, traffic is passed only through external bridge. In the future, test scenarios will launch VNFs and traffic will be properly routed to them. Proper routing can be ensured by OVS flows configuration via setup-script executed during setup phase. Testcase definition yaml files inside vsperf/ directory won't be pushed to the yardstick, but they will be stored inside vsperf repository. They are part of the draft review only to show how it is done. JIRA: VSPERF-288 Change-Id: I13a519ed39091fe89d1a43cc522738044fb3c609 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: <sunshine.wang@huawei.com> Reviewed-by: <lvjing5@huawei.com> Reviewed-by: <jean.gaoliang@huawei.com> Reviewed-by: <david.j.chou@intel.com>
2016-07-08Updated armbandsridharkn1-0/+0
Project: vswitchperf 7cded121ab8291d742ea9d5324f93cae34dc10e5 Spirent-TestCenter: Code Cleanup. Removal of redunant code in testcenter.py. No logic Changes. Cosmetic changes - removing redundant code of 150+ lines. JIRA: VSPERF-308 Change-Id: I4766890cdc9f3d23103b2d2090285361ac4a5197 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-07-08Updated armbandChristian Trautman1-0/+0
Project: vswitchperf 7a16aa0bc7875b5b3fe6385cf99afa076e1e1cb3 rstp-stp: Add basic functions for stp/rstp enable on ovs Add basic functions to enable/disable spanning tree protocols on the bridge. Also adds bridge info function to retrieve other bridge information. JIRA: VSPERF-314 Change-Id: Ic72c5a2a9d16aab1b95428ce37042a5b536481aa Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-08Updated armbandChristian Trautman1-0/+0
Project: vswitchperf cead9a3d0571b8afc5ed680475e9bc3ea92c7d79 Namespace_veth: Add funtionality for network namespace, veth ports Adds functionality for network namespaces and veth/peer ports to connect the namespaces. The namespaces are tracked outside of default Linux namespaces to prevent possible disruption of work outside of VSPerf where a user may create a namespace and the cleanup code deletes it. The cleanup code only removes namespaces and veth ports created inside the testcase. JIRA: VSPERF-310 Change-Id: If8881cafb119f38f052403a1de497e9660187d2e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 3cf1c2162d800e4f5a5596bdf54732ba906c95f6 Add Yardstick TC044 TEST CASE JIRA:yardstick-290 Change-Id: I2537f6561221226cf8961a2f8221f039cecf7fe0 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 609e6ea459afc1aff901ecb1cd38c403ef8f8c13 Add test case description and task file for TC045 JIRA: YARDSTICK-291 Change-Id: I85081c075fb795ee7839009952e49ad13b9cf2bf Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>
2016-07-08Updated armbandliang gao1-0/+0
Project: yardstick 4d78a2c02653f4918b55e0becad9094518e1afc3 Add fuel test suite This file is used for verifing yardstick in fuel integration. Change-Id: Ied9f714763f974af5a3abd953f66c966f196c4ec Signed-off-by: JingLu5 <lvjing5@huawei.com>
2016-07-07transplant.py: Allow SSH on all interfaces.Alexandru Avadanii1-5/+3
Previously (in Fuel 8.0), SSH used to listen only on 10.20.0.2 (admin interface), which required editing sshd_config and restarting SSH server for allowing SSH connections over the public IP on eth1 (just an example, which corresponds to Armband PODs use cases). In Fuel 9.0, SSH server on Fuel Master listens on all ifaces, but connections are filtered by iptables. This change piggy-backs on a previous Armband addition that allows transplant.py script to configure additional interfaces (e.g. public). In case additional interfaces have been configured by transplant, this change will instruct iptables to accept SSH connections on ANY interface, not only the admin one. Possible improvements: - limit SSH access to admin + interfaces added by transplant instead of ANY; Change-Id: I0923496e1b23f6dc826c8afbbe9805956c2d4b34 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>