diff options
Diffstat (limited to 'patches/opnfv-fuel')
3 files changed, 197 insertions, 0 deletions
diff --git a/patches/opnfv-fuel/0031-post-scripts-Enable-systemd-binfmt-for-first-boot.patch b/patches/opnfv-fuel/0031-post-scripts-Enable-systemd-binfmt-for-first-boot.patch new file mode 100644 index 00000000..e3100962 --- /dev/null +++ b/patches/opnfv-fuel/0031-post-scripts-Enable-systemd-binfmt-for-first-boot.patch @@ -0,0 +1,96 @@ +From: Alexandru Avadanii <Alexandru.Avadanii@enea.com> +Date: Thu, 9 Jun 2016 19:46:56 +0200 +Subject: [PATCH] post-scripts: Enable systemd-binfmt for first boot. + +IMPORTANT: +This commit introduces the following file on Fuel Master, +containing the list of arch supported for target nodes: +</etc/fuel_openstack_arch>. + +This file is created AFTER pre.d OPNFV scripts are ran, also by +bootstrap_admin_node.sh, BEFORE the post.d scripts are executed. +NOTE: Arch format is the same used by dpkg (e.g.: "amd64 arm64") + +Based on the number of foreign architectures we should support +(the list of archs in /etc/fuel_openstack_arch minus native arch), +we determine whether cross-builds are expected, in which case +binfmt support should be functional during first Fuel Master boot. + +Since systemd-binfmt service has a series of preconditions for +starting, which are tested early during first boot, some of them +are NOT YET true (e.g. no binfmt handlers are present before +qemu-user-static package is installed), so the service is not +automatically started. Of course, this only affects the first boot. + +Finally, this commit adds an OPNFV post-install script in +/opt/opnfv/bootstrap/post.d, which starts systemd-binfmt service. +--- + build/bootstrap_admin_node.sh.patch | 15 ++++++++++ + .../post-scripts/80_prepare_cross_builds.sh | 32 ++++++++++++++++++++++ + 2 files changed, 47 insertions(+) + create mode 100755 build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh + +diff --git a/build/bootstrap_admin_node.sh.patch b/build/bootstrap_admin_node.sh.patch +index b1ea90b..7f16d0b 100644 +--- a/build/bootstrap_admin_node.sh.patch ++++ b/build/bootstrap_admin_node.sh.patch +@@ -24,6 +24,21 @@ + nodes over PXE, they will be discovered and become available for installing \ + OpenStack on them" + *************** ++*** 239,244 **** ++--- 239,250 ---- ++ # /etc/fuel_openstack_version is provided by 'fuel-openstack-metadata' package ++ OPENSTACK_VERSION=$(cat /etc/fuel_openstack_version) ++ +++ # FIXME(armband): This part might be moved to an earlier stage later +++ # /etc/fuel_openstack_arch is constructed based on local mirror metadata +++ grep -oP "^Architectures: \K.*$" \ +++ ${wwwdir}/${OPENSTACK_VERSION}/ubuntu/x86_64/dists/mos${FUEL_RELEASE}/Release > \ +++ /etc/fuel_openstack_arch +++ ++ # We do not ship debian-installer kernel and initrd on ISO. ++ # But we still need to be able to create ubuntu cobbler distro ++ # which requires kernel and initrd to be available. So, we ++*************** + *** 339,346 **** + set +x + echo "Done!" +diff --git a/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +new file mode 100755 +index 0000000..d33d1d1 +--- /dev/null ++++ b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +@@ -0,0 +1,32 @@ ++#/bin/sh ++############################################################################## ++# Copyright (c) 2016 Enea AB and others. ++# Alexandru.Avadanii@enea.com ++# All rights reserved. This program and the accompanying materials ++# are made available under the terms of the Apache License, Version 2.0 ++# which accompanies this distribution, and is available at ++# http://www.apache.org/licenses/LICENSE-2.0 ++############################################################################## ++ ++echo "Preparing for cross-building bootstrap/target images" ++ ++# Fmt handlers are set up by qemu-user-static (after systemd-binfmt ++# prerequisites are checked during first boot of Fuel Master node). ++ ++# Cross-building support provides dpkg, as a fuel-agent dependency ++if which dpkg > /dev/null 2>&1; then ++ # /etc/fuel_openstack_arch is created by bootstrap_admin_node.sh ++ FOREIGN_ARCH_CNT=$(sed -e "s/$(dpkg --print-architecture)//" \ ++ /etc/fuel_openstack_arch | wc -w) ++ if [ ${FOREIGN_ARCH_CNT} -gt 0 ]; then ++ # If no fmt handlers are configured, the service is not started, ++ # so request it explicitly (only necessary for the first boot). ++ systemctl start systemd-binfmt ++ if [ $? -ne 0 ]; then ++ echo "Error starting systemd-binfmt!" ++ exit 1 ++ fi ++ fi ++fi ++ ++echo "Done preparing cross-building" diff --git a/patches/opnfv-fuel/0032-mcagent-Increase-max-shell-command-timeout-to-2h.patch b/patches/opnfv-fuel/0032-mcagent-Increase-max-shell-command-timeout-to-2h.patch new file mode 100644 index 00000000..f5fc4cf1 --- /dev/null +++ b/patches/opnfv-fuel/0032-mcagent-Increase-max-shell-command-timeout-to-2h.patch @@ -0,0 +1,49 @@ +From: Alexandru Avadanii <Alexandru.Avadanii@enea.com> +Date: Thu, 9 Jun 2016 21:37:48 +0200 +Subject: [PATCH] mcagent: Increase max shell command timeout to 2h + +Since `execute_shell_command` mcagent is used for building the target +image and the timeout provided in the astute task is just respected on +the Astute level (on mcollective level this timeout is actually a +minumum between value provided and ddl value) we need to increase it +for Armband operation. + +Because Armband builds the target image via `qemu-debootstrap`, it can +take more than 1 hour to finish the building. Therefore aside of +increasing the timeout in the Astute task, the maximum timeout value +for mcagent has to be increased. + +[ Alexandru Avadanii ] +Repackaged, based on Stan's `fuel-astute` patch. + +Signed-off-by: Stanislaw Kardach <stanislaw.kardach@caviumnetworks.com> +Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> +--- + .../f_bootstrap/post-scripts/80_prepare_cross_builds.sh | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +diff --git a/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +index d33d1d1..d78b850 100755 +--- a/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh ++++ b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +@@ -26,6 +26,20 @@ if which dpkg > /dev/null 2>&1; then + echo "Error starting systemd-binfmt!" + exit 1 + fi ++ ++ # Cross-build timeout adjustments ++ # ++ # Since `execute_shell_command` mcagent is used for building the target ++ # image and the timeout provided in the astute task is just respected on ++ # the Astute level (on mcollective level this timeout is actually a ++ # minumum between value provided and ddl value) we need to increase it ++ # for cross-build operations. ++ ++ # Building the target image via `qemu-debootstrap` can take more than ++ # 1 hour. Therefore aside of increasing the timeout in the Astute task, ++ # the maximum timeout value for mcagent has to be increased (use 2h). ++ sed -i.bak -r 's/^(\s+:timeout\s*=>)\s*[[:digit:]]+$/\1 7200/' \ ++ /usr/libexec/mcollective/mcollective/agent/execute_shell_command.ddl + fi + fi + diff --git a/patches/opnfv-fuel/0033-bootstrap-Use-gzip-instead-of-xz-compression.patch b/patches/opnfv-fuel/0033-bootstrap-Use-gzip-instead-of-xz-compression.patch new file mode 100644 index 00000000..e7b176b9 --- /dev/null +++ b/patches/opnfv-fuel/0033-bootstrap-Use-gzip-instead-of-xz-compression.patch @@ -0,0 +1,52 @@ +From: Alexandru Avadanii <Alexandru.Avadanii@enea.com> +Date: Fri, 10 Jun 2016 22:30:29 +0200 +Subject: [PATCH] bootstrap: Use gzip instead of xz compression. + +bootstrap mksquashfs using qemu-user-static is extremely slow, +taking up to one hour. gzip, on the other hand, is reasonably fast. +According to [1], xz is slower, with not much size gain. + +[1] https://jonathancarter.org/2015/04/06/squashfs-performance-testing/ + +Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> +--- + .../post-scripts/80_prepare_cross_builds.sh | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +diff --git a/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +index 3839d62..7ceaacc 100755 +--- a/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh ++++ b/build/f_isoroot/f_bootstrap/post-scripts/80_prepare_cross_builds.sh +@@ -27,6 +27,11 @@ if which dpkg > /dev/null 2>&1; then + exit 1 + fi + ++ # Determine python site-packages directory location ++ PYTHON_SITEPKGS_DIR=$(python -c \ ++ "from distutils.sysconfig import get_python_lib; print(get_python_lib())") ++ [ -d ${PYTHON_SITEPKGS_DIR} ] || exit 1 ++ + # Cross-build timeout adjustments + # + # Since `execute_shell_command` mcagent is used for building the target +@@ -40,6 +45,20 @@ if which dpkg > /dev/null 2>&1; then + # the maximum timeout value for mcagent has to be increased (use 2h). + sed -i.bak -r 's/^(\s+:timeout\s*=>)\s*[[:digit:]]+$/\1 7200/' \ + /usr/libexec/mcollective/mcollective/agent/execute_shell_command.ddl ++ ++ # Bootstrap: Use gzip instead of xz compression. ++ # ++ # bootstrap mksquashfs via `qemu-user-static` is extremely slow, ++ # taking up to one hour. gzip, on the other hand, is reasonably fast. ++ ++ # See the following article for a comparison between gzip and xz ++ # https://jonathancarter.org/2015/04/06/squashfs-performance-testing/ ++ # xz is slower, with very little size gain. ++ if [ -f ${PYTHON_SITEPKGS_DIR}/fuel_bootstrap/consts.py ]; then ++ sed -i.bak -r "s/^(\s+'compress_format'\s*:\s*').*?('.*)$/\1gzip\2/g" \ ++ ${PYTHON_SITEPKGS_DIR}/fuel_bootstrap/consts.py ++ echo "INFO: [xz] => [gzip] updated bootstrap initrd / rootfs compression." ++ fi + fi + fi + |