diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/installation-instruction.rst | 55 |
1 files changed, 38 insertions, 17 deletions
diff --git a/docs/installation-instruction.rst b/docs/installation-instruction.rst index f757475a..659a7019 100644 --- a/docs/installation-instruction.rst +++ b/docs/installation-instruction.rst @@ -13,7 +13,8 @@ Abstract ======== This document describes how to install the Brahmaputra 3.0 release of -OPNFV when using Fuel as a deployment tool, with an AArch64 (only) target node pool. +OPNFV when using Fuel as a deployment tool, with an AArch64 (only) target +node pool. Introduction ============ @@ -43,20 +44,22 @@ Retrieving the ISO image ------------------------ First of all, the Fuel deployment ISO image needs to be retrieved, the -Fuel .iso image of the AArch64 Brahmaputra release can be found at *Reference: 2* +ArmbandFuel .iso image of the AArch64 Brahmaputra release can be found +at *Reference: 2* Building the ISO image ---------------------- -Alternatively, you may build the .iso from source by cloning the -opnfv/armband git repository. To retrieve the repository for the AArch64 Brahmaputra 3.0 release use the following command: +Alternatively, you may build the ArmbandFuel .iso from source by cloning the +opnfv/armband git repository. To retrieve the repository for the AArch64 +Brahmaputra 3.0 release use the following command: $git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/armband -Check-out the Brahmaputra stable branch to set the branch to the +Check-out the Brahmaputra release tag to set the branch to the baseline required to replicate the Brahmaputra release: -$ git checkout stable/brahmaputra +$ git checkout brahmaputra.3.0 Go to the armband directory and build the .iso: @@ -67,7 +70,6 @@ For more information on how to build, please see *Reference: 14* Other preparations ------------------ - Next, familiarize yourself with Fuel by reading the following documents: - Fuel planning guide, please see *Reference: 8* @@ -104,15 +106,13 @@ Hardware requirements ===================== The following minimum hardware requirements must be met for the -installation of Brahmaputra using Fuel: +installation of AArch64 Brahmaputra 3.0 using Fuel: +--------------------+------------------------------------------------------+ | **HW Aspect** | **Requirement** | | | | +====================+======================================================+ -| **# of nodes** | Minimum 5 (3 for non redundant deployment): | -| | | -| | - 1 Fuel deployment master (may be virtualized) | +| **AArch64 nodes** | Minimum 5 (3 for non redundant deployment): | | | | | | - 3(1) Controllers (1 colocated mongo/ceilometer | | | role, 2 Ceph-OSD roles) | @@ -120,7 +120,7 @@ installation of Brahmaputra using Fuel: | | - 1 Compute (1 co-located Ceph-OSD role) | | | | +--------------------+------------------------------------------------------+ -| **CPU** | Minimum 1 socket x86_AMD64 with Virtualization | +| **CPU** | Minimum 1 socket AArch64 (ARMv8) with Virtualization | | | support | +--------------------+------------------------------------------------------+ | **RAM** | Minimum 16GB/server (Depending on VNF work load) | @@ -137,6 +137,8 @@ installation of Brahmaputra using Fuel: | | or spread out over multiple NICs as your hardware | | | supports. | +--------------------+------------------------------------------------------+ +| **1 x86_64 node** | - 1 Fuel deployment master, x86 (may be virtualized) | ++--------------------+------------------------------------------------------+ Help with Hardware Requirements =============================== @@ -214,8 +216,12 @@ Install Fuel master #. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP/Static in your corporate/lab network (see figure below). - - Configuration of ETH1 interface for connectivity into your corporate/lab network is mandatory. You need to have internet access over this interface. - Due to the architecture of ports.ubuntu.com mirror, currently Fuel cannot create a full local mirror of all required AArch64 packages. Internet access is needed to deploy with Fuel on AArch64 nodes. + - **Note**: ArmbandFuel@OPNFV requires internet connectivity during bootstrap + image building, due to missing arm64 (AArch64) packages in the partial + local Ubuntu mirror (consequence of ports.ubuntu.com mirror architecture). + + - Configuration of ETH1 interface for connectivity into your corporate/lab + network is mandatory, as internet connection is required during deployment. .. figure:: img/fuelmenu2.png @@ -325,6 +331,9 @@ Install additional Plugins/Features on the FUEL node #. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm" Expected output: "Plugin ....... was successfully installed." (see figure below) + **NOTE**: AArch64 Brahmaputra 3.0 ships only with Opendaylight plugin, + see *Reference 15*. + .. figure:: img/plugin_install.png Create an OpenStack Environment @@ -346,7 +355,7 @@ Create an OpenStack Environment - Select "Neutron with ML2 plugin" - - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins) + - Select "Neutron with tunneling segmentation" (Required when using the ODL plugin) - Press <Next> @@ -494,7 +503,7 @@ Allocate nodes to environment and assign functional roles - Click on the <+Add Nodes> button - - Check <Controller>, <Telemetry - MongoDB> and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section. + - Check <Controller>, <Telemetry - MongoDB> and optionally an SDN Controller role (OpenDaylight controller) in the Assign Roles Section. - Check one node which you want to act as a Controller from the bottom half of the screen @@ -532,9 +541,18 @@ Allocate nodes to environment and assign functional roles .. figure:: img/interfaceconf.png -OPTIONAL - Set Local Mirror Repos +OPTIONAL - UNTESTED - Set Local Mirror Repos --------------------------------- +**NOTE**: AArch64 Brahmaputra 3.0 does not fully support local Ubuntu mirrors, +or at least does not ship with arm64 packages in local repos by default. +In order to use local (partial) Ubuntu mirrors, one should add arm64 packages +by hand to the existing amd64 mirrors and re-generate repo metadata. +Local MOS/Auxiliary repos contain packages for both amd64 and arm64. + +**NOTE**: Below instruction assume you already added (by hand) arm64 +Ubuntu necessary packages to the local repository! + The following steps can be executed if you are in an environment with no connection to the Internet. The Fuel server delivers a local repo that can be used for installation / deployment of openstack. @@ -596,6 +614,9 @@ Installation health-check - Allow tests to run and investigate results where appropriate + - Check *Reference 15* for known issues / limitations on AArch64, like + unsupported migration tests when using a GICv3 interrupt controller + .. figure:: img/health.png References |