summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-02-22Allows for specifying compute node RAMTim Rozet2-5/+17
Currently we allow specifying ram per Overcloud VM. If the node is detected as ODL, we bump the RAM to a minimum of 10GB. There is a need to be able to specify the RAM per compute node in cases where we need controller RAM to be high, but want compute nodes to be low (like CSIT) - in order to keep the memory footprint as small as possible. Changes Include: - Adds '--virtual-compute-ram' argument that will override the '--virtual-ram' param for compute nodes - Fixes a bug where if ODL is used and RAM is overridden to 10GB for Control nodes, it was also accidentally being set for compute nodes - Modifies '--virtual-ram' to be '--virtual-default-ram' in order to clarify this parameter sets the default amount of RAM for all overcloud nodes which may be overridden by a role specific arg Change-Id: Ia36082aa2167d9897f3ec6753d08804352301c63 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-22Adding congress support back into DanubeDan Radez8-12/+25
opnfv-tht-pr: 97 opnfv-puppet-tripleo-pr: 10 Change-Id: Idfc109fc984f20b096a23d12864a027146a9c74c Signed-off-by: Dan Radez <dradez@redhat.com>
2017-02-18Merge "onos feature install modified for onos 1.8"Tim Rozet1-1/+1
2017-02-18Merge "Add support for odl-fdio scenario"Tim Rozet22-2066/+582
2017-02-18Merge "Adding Quagga to build"Tim Rozet12-1/+1289
2017-02-17Adding Quagga to buildRomanos Skiadas12-1/+1289
Builds 6Wind ZRPC, Quagga, and dependencies required for OpenDaylight with BGPVPN scenario. Packages are built into RPMs, and left on the overcloud disk in /root/quagga. They are then installed at deploy time if VPN feature flag is enabled. Note, for proper upstream we should create a zrpc OOO service, but that can be a follow up patch. For that we would also need official packaging/build system upstream somewhere. JIRA: APEX-357 Changes Include: - Build thrift rpm - Build c-capnproto rpm - Build quagga rpm - Build zrpcd rpm - Configure bgpd - Detect deploy with VPN and install pkgs - Enable zrpcd with systemd Change-Id: I9825694f46aaab48a3d1cd5fc4d9a24c7370e8fa Signed-off-by: Tim Rozet <trozet@redhat.com> Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com> Signed-off-by: Romanos Skiadas <rski@intracom-telecom.com>
2017-02-18Add support for odl-fdio scenarioFeng Pan22-2066/+582
Changes: - Kernel parameters are now set through first-boot.yaml during deployment. No custom images will be built. Note that all nodes will be configured the same way, we only use compute's kernel parameter settings currently (from deploy settings file) - Add support for VPP interface type in network settings file, it is now possible to specify vpp_interface type and uio_driver for tenant nic in network settings file. A new example config, network_settings_vpp.yaml is added. - Add support for odl_l2-fdio scenario. Limitations: - Physical NIC names must be specified in network settings file, numbered nic names such as nic1 are not supported for fdio scenarios. - The same kernel parameters will be configured for all nodes. The paramters will be taken from compute kernel parameter section in deploy settings file. opnfv-tht-pr: 104 opnfv-puppet-tripleo-pr: 12 os-net-config-pr: 3 Change-Id: Ie9d6151e6e58d11da3c66fbcabe4a0886c3fa152 Signed-off-by: Feng Pan <fpan@redhat.com>
2017-02-17Fix docs path in common rpm spec fileFeng Pan1-5/+5
Change-Id: Iefe3e0a3e8cdd9e84b3d094eaa1dcea552552be2 Signed-off-by: Feng Pan <fpan@redhat.com>
2017-02-17Merge "onos 1.8 upgradation"Dan Radez1-1/+1
2017-02-17Doc updates for MS6Sofia Wallin13-0/+0
Updated the docs structure according to directives and MS6 Change-Id: I36e92cbc58328528ebb91ff4f54ee701f5477443 Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>
2017-02-17onos feature install modified for onos 1.8rssaravana1-1/+1
Change-Id: Idc60b0304f8f37d2daa7aa6cd220be7859121352 Signed-off-by: rssaravana <saravanakumar.somaskandan@huawei.com>
2017-02-17onos 1.8 upgradationrssaravana1-1/+1
Change-Id: I5e9b8dd51be347f08e8ab8205a70121b903347fd Signed-off-by: rssaravana <saravanakumar.somaskandan@huawei.com>
2017-02-16Merge "Adding Gluon to post-install and bumping version"Tim Rozet2-1/+14
2017-02-16Merge "Enables OpenDaylight HA"Dan Radez1-0/+1
2017-02-16Removes cinder quota show in post installTim Rozet1-1/+0
We used this a while back for additional debug output to prove the quota setting were correct. Now with composable services, it isn't always guaranteed that cinder is used. Since we don't use this output for anything, this patch removes it. Change-Id: I27ba64761a5ec1bfbe9da0c3e331ba91010d1186 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-16Enables OpenDaylight HATim Rozet1-0/+1
Enables ODL clustering by default for all HA ODL scenarios. opnfv-tht-pr: 107 opnfv-puppet-tripleo: 14 JIRA: APEX-390 Change-Id: I17934b5300e0cc9de36c24b4cd5b06ea54d05b8d Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-16Merge "Adding tacker support back into Danube"Tim Rozet8-63/+36
2017-02-16Adding Gluon to post-install and bumping versionGeorg Kunz2-1/+14
Adding the creation of the Gluon dummy network and subnet to the post installation steps. Bumping the version of Gluon to the latest. opnfv-tht-pr: 106 Change-Id: I5123916f0e153cbd1e70e443d9c8af38ac55fdef Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
2017-02-15Removes cinder from controller with CSIT envTim Rozet1-4/+0
Change-Id: Iff08b7c7eabfafe3661d8d30e0a81cc38b44eaa3 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-13Adding tacker support back into DanubeDan Radez8-63/+36
opnfv-tht-pr: 98 opnfv-puppet-tripleo-pr: 11 Change-Id: I971bb2c94eb9500c81b25adf5019fd02f8e90053 Signed-off-by: Dan Radez <dradez@redhat.com>
2017-02-10Adding gluon to the Build and DeploysystemGeorg Kunz6-3/+32
In order to make gluon really deployable some more things need to be done: - Add pull request 103 which add yaml files which point to gluon puppet - Rename the scenario to odl-gluon similar to bgpvpn scenario - Add tht of gluon to overcloud-deploy-functions.sh JIRA: APEX-379 opnfv-tht-pr: 103 opnfv-puppet-tripleo-pr: 13 Change-Id: I3ccfb5a279f1df21c4da79fc47039b3c0b6e5495 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com> Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
2017-02-10Fixes networking-bgpvpn pkg installTim Rozet2-2/+4
Also includes minor change for tox working directory to move up one dir (build dir) for congress. This is due to https://github.com/tox-dev/tox/issues/66 Removes networking_bgpvpn.conf, and uses neutron service_providers to set. This is because we do not have upstream patches to configure bgpvpn conf file via OOO and having 2 definitions breaks deploy. Change-Id: I9846bd959c1ed8e2e81f3ae30470ec357da3fc8f Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-08CSIT: adds default floating ip poolTim Rozet1-0/+1
Change-Id: Ib9e118983a0f59dbf416fa157f312eacc73763a3 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-08Adds default root password to undercloudTim Rozet1-0/+1
Adds default password 'stack' Change-Id: Ib45c0382f09b4d772d83eb984eee227cb3e23083 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-08Merge "Use RDO packaged networking-odl"Tim Rozet2-20/+1
2017-02-08Merge "Adding yardstick installation using docker container"Michael Chapman3-1/+14
2017-02-07Use RDO packaged networking-odlFeng Pan2-20/+1
We currently use networking-odl package from opnfv fds repo, this is no longer needed as networking-odl is packaged in RDO. Change-Id: Ie9301cd627ab5131d4cd698dd7e4ef435d8e59c0 Signed-off-by: Feng Pan <fpan@redhat.com>
2017-02-07Merge "Add gluon scenario config file"Tim Rozet4-1/+18
2017-02-07Merge "Fixing apex build system CentOS-7-1511 not found"Dan Radez1-1/+1
2017-02-07Merge "Upgrades os-net-config to stable/danube"Dan Radez1-1/+1
2017-02-07Add gluon scenario config fileNikolas Hermanns4-1/+18
This patch adds first version of gluon scenario config file, as well as introducing etcd service in puppet-fdio and T-H-T. JIRA: APEX-379 opnfv-tht-pr: 96 opnfv-puppet-tripleo-pr: 9 Change-Id: Icef29520d093e005dba9cbc5cf0e3fd1ed893cf4 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-02-07Fixing apex build system CentOS-7-1511 not foundNikolas Hermanns1-1/+1
The build system is broken since CentOS-7-1511 is not found on the mirror http://mirrors.cat.pdx.edu. 1511 is deprecated as written in: http://mirror.pregi.net/centos/7.2.1511/readme Fixes: https://build.opnfv.org/ci/job/apex-build-master/340/console Change-Id: I20d5cfddebb4be338f8b712bbe4d02dcbab30e5d Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-02-06Adding yardstick installation using docker containerManjunath Ranganathaiah3-1/+14
This patch adds yardstick option to deploy settings, installs docker and yardstick image to undercloud. Change-Id: I3a2a1d6bcdfe5becd11d6d9f22218837c572d5da Signed-off-by: Manjunath Ranganathaiah <manjunath.ranganathaiah@intel.com>
2017-02-06Upgrades os-net-config to stable/danubeTim Rozet1-1/+1
stable/danube is based on latest stable/newton with our hieradata/dpdk patches rebased on top. JIRA: APEX-386 Change-Id: Ia7b6a1b55bfeb727d1de4532bef79594dcd8b7f7 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-02-06Adding networking-bgpvpn; use new neutron-opendaylight-bgpvpn.yamlNikolas Hermanns2-16/+15
opnfv-tht-pr: 100 Change-Id: I5db74e9ec74d6d03fde1650739d934ddfeec45ec Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-02-06Fixing glance-client and rallyNikolas Hermanns1-0/+16
Since the project_id is not in the overcloudrc glance clinet is failing. Since os_tenant_name is not in overcloudrc rally setup is failing. Change-Id: Iaec4031d3419e8380fb8789288e587c44d600971 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-01-26[BGPVPN] Remove l2 in Name; Enable ODL BoronNikolas Hermanns7-11/+13
Since Boron ODL servers always the l3 usecase so the l2 differentiation does not make sense anymore. Depends: https://gerrit.opnfv.org/gerrit/27605 Change-Id: I8bb55387001dfc81845134639ab4e913072f9a27 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-01-26Merge "Fixes yum update on undercloud"Tim Rozet2-1/+27
2017-01-25Merge "Changes to Installation Procedure docs"Tim Rozet1-1/+1
2017-01-25Fixes yum update on undercloudTim Rozet2-1/+27
We had already disabled this via puppet, but the code upstream was moved into python. This patch now disables it in python. JIRA: APEX-382 Change-Id: Ib8bb82945244818b1de0f26e3e80f599be72e8f6 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-01-25Merge "[BGPVPN] Remove setup_TEPS"Dan Radez1-4/+0
2017-01-25Merge "fix post-install.sh"Dan Radez1-4/+4
2017-01-25Merge "Some bugfixes in simple_deploy.sh"Michael Chapman1-7/+7
2017-01-24fix post-install.shRyota MIBU1-4/+4
If sahara and swift are not configured, the post install script will fail during removals of endpoints for sahara and swift. This patch adds checks whether endpoints to be removed exist or not. Change-Id: I8e417dbe6e51461d7c4ef1e2368865917b2f8279 Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
2017-01-24[BGPVPN] Remove setup_TEPSNikolas Hermanns1-4/+0
with boron the setup teps script is not needed anymore Change-Id: I72cbd2201089ede4fca4ece63c126b7f4f826f1e Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-01-23removeing congress requirements.txtDan Radez1-0/+1
- upstream removes requirements.txt during setup like this seems we're getting bitten by letting pip try and handle deps. This shoudl fix it for now and we can clean out this spec once upstream distgit lands Change-Id: I82356dce100011da78e2b18a678f0fc98fac3216 Signed-off-by: Dan Radez <dradez@redhat.com>
2017-01-23Some bugfixes in simple_deploy.shNikolas Hermanns1-7/+7
Change-Id: I553beedc6195dd4714ba6cb388036da2bd7a355d Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2017-01-20Change commands to print PublicVip to fix format issue.Tomofumi Hayashi1-1/+1
Latest 'openstack stack output' commands prints output with ascii table format, so opnfv-deploy output breaks as following: "Overcloud dashboard available at http://+---------" This change fix it with json+jq. Change-Id: I594f31254caeee1dc2bc3c6d39d9640cba039f05 Signed-off-by: Tomofumi Hayashi <tohayash@redhat.com>
2017-01-16Removes previous patch for osc authTim Rozet2-35/+0
This should be fixed now upstream Change-Id: I84e4da5576f54401e8085be9d0dcab7b493c6496 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-01-13Merge "Adding installation of ansible and dependencies to host attempting to ↵Tim Rozet2-1/+8
execute <apex>/ci/run_smoke_tests.sh. Also fixed the filename that contains the test stdout/stderr output from snoke-tests.out to smoke-tests.out"