diff options
Diffstat (limited to 'tests/config')
| -rw-r--r-- | tests/config/network_settings_duplicate_nic.yaml | 115 | ||||
| -rw-r--r-- | tests/config/network_settings_missing_required_nic.yaml | 113 | ||||
| -rw-r--r-- | tests/config/network_settings_nic1_reserved.yaml | 113 | ||||
| -rw-r--r-- | tests/config/network_settings_nics_not_specified.yaml | 107 |
4 files changed, 0 insertions, 448 deletions
diff --git a/tests/config/network_settings_duplicate_nic.yaml b/tests/config/network_settings_duplicate_nic.yaml deleted file mode 100644 index 24dd5ca0..00000000 --- a/tests/config/network_settings_duplicate_nic.yaml +++ /dev/null @@ -1,115 +0,0 @@ -# This configuration file defines Network Environment for a -# Baremetal Deployment of OPNFV. It contains default values -# for 4 following networks: -# -# - admin -# - private* -# - public -# - storage* -# -# *) optional networks -# -# Any values missing from this configuration file will be -# auto-detected by deployment script from the existing network -# configuration of the jumphost. -# -# Optional networks will be consolidated with the admin network -# if not explicitely configured. -# -# See short description of the networks in the comments below. -# - -# DNS Servers for all nodes, comma delimited list -dns_servers: ["8.8.8.8", "8.8.4.4"] - -# "admin" is the short name for Control Plane Network. -# During OPNFV deployment it is used for node provisioning so -# PXE boot should be enabled for the related interfaces on all -# the nodes in the OPNFV cluster. After the deployment this -# network is used as the OpenStack management network which -# carries e.g. communication between its internal components. -# -admin_network: - enabled: true - network_type: bridged - bridged_interface: '' - bond_interfaces: '' - compute_interface: eth1 - controller_interface: eth2 - usable_ip_range: 192.0.2.11,192.0.2.99 - gateway: 192.0.2.1 - provisioner_ip: 192.0.2.1 - cidr: 192.0.2.0/24 - dhcp_range: 192.0.2.2,192.0.2.10 - introspection_range: 192.0.2.100,192.0.2.120 - -# "private" is an optional network used as underlying physical -# network for virtual provider and tenant networks created by -# users. Traffic between virtual machines is carried by this -# network. -# -private_network: - enabled: true - vlan: native - cidr: 11.0.0.0/24 - compute_interface: enp0s4 - controller_interface: nic3 - -# "public" network is used for external connectivity. -# The external network provides Internet access for virtual -# machines. If floating IP range is defined for this network, -# floating IP addresses can be used for accessing virtual -# machines from outside of OPNFV cluster. Also external REST -# API calls use this network. -# -public_network: - enabled: true - network_type: '' - bridged_interface: '' - compute_interface: eth1 - controller_interface: enp0s3 - vlan: native - cidr: 192.168.37.0/24 - gateway: 192.168.37.1 - floating_ip_range: 192.168.37.200,192.168.37.220 - usable_ip_range: 192.168.37.10,192.168.37.199 - provisioner_ip: 192.168.37.1 - -# "storage" is an optional network used by storage backends. -# You can configure this network in order to reduce load on -# Control Plane Network. -# -storage_network: - enabled: true - vlan: native - cidr: 12.0.0.0/24 - compute_interface: eth5 - controller_interface: eth6 - -#admin_network: -# enabled: true -# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond -# bridged_interface: '' #Interface to bridge to for installer VM -# bond_interfaces: '' #Interfaces to create bond with for installer VM -# compute_interface: nic4 #Interface used for this network on the compute node. Can either be logical nic name like "nic1" or real name like "eth1" -# controller_interface: nic4 #Interface used for this network on the controller node. Can either be logical nic name like "nic1" or real name like "eth1" -# vlan: native #VLAN tag to use, native means none -# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 -# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected -# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet -# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected -# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned -# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes) -#private_network: -# enabled: false #If disabled, internal api traffic will collapse to admin_network -#public_network: -# enabled: true #If disabled, public_network traffic will collapse to admin network -# network_type: '' -# bridged_interface: '' -# cidr: 192.168.37.0/24 -# gateway: 192.168.37.1 -# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron -# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet -# provisioner_ip: 192.168.37.1 -#storage_network: -# enabled: false #If disabled, storage_network traffic will collapse to admin network diff --git a/tests/config/network_settings_missing_required_nic.yaml b/tests/config/network_settings_missing_required_nic.yaml deleted file mode 100644 index 18886278..00000000 --- a/tests/config/network_settings_missing_required_nic.yaml +++ /dev/null @@ -1,113 +0,0 @@ -# This configuration file defines Network Environment for a -# Baremetal Deployment of OPNFV. It contains default values -# for 4 following networks: -# -# - admin -# - private* -# - public -# - storage* -# -# *) optional networks -# -# Any values missing from this configuration file will be -# auto-detected by deployment script from the existing network -# configuration of the jumphost. -# -# Optional networks will be consolidated with the admin network -# if not explicitely configured. -# -# See short description of the networks in the comments below. -# - -# DNS Servers for all nodes, comma delimited list -dns_servers: ["8.8.8.8", "8.8.4.4"] - -# "admin" is the short name for Control Plane Network. -# During OPNFV deployment it is used for node provisioning so -# PXE boot should be enabled for the related interfaces on all -# the nodes in the OPNFV cluster. After the deployment this -# network is used as the OpenStack management network which -# carries e.g. communication between its internal components. -# -admin_network: - enabled: true - network_type: bridged - bridged_interface: '' - bond_interfaces: '' - compute_interface: eth1 - controller_interface: eth2 - usable_ip_range: 192.0.2.11,192.0.2.99 - gateway: 192.0.2.1 - provisioner_ip: 192.0.2.1 - cidr: 192.0.2.0/24 - dhcp_range: 192.0.2.2,192.0.2.10 - introspection_range: 192.0.2.100,192.0.2.120 - -# "private" is an optional network used as underlying physical -# network for virtual provider and tenant networks created by -# users. Traffic between virtual machines is carried by this -# network. -# -private_network: - enabled: true - vlan: native - cidr: 11.0.0.0/24 - compute_interface: enp0s4 - controller_interface: nic3 - -# "public" network is used for external connectivity. -# The external network provides Internet access for virtual -# machines. If floating IP range is defined for this network, -# floating IP addresses can be used for accessing virtual -# machines from outside of OPNFV cluster. Also external REST -# API calls use this network. -# -public_network: - enabled: true - network_type: '' - bridged_interface: '' - vlan: native - cidr: 192.168.37.0/24 - gateway: 192.168.37.1 - floating_ip_range: 192.168.37.200,192.168.37.220 - usable_ip_range: 192.168.37.10,192.168.37.199 - provisioner_ip: 192.168.37.1 - -# "storage" is an optional network used by storage backends. -# You can configure this network in order to reduce load on -# Control Plane Network. -# -storage_network: - enabled: true - vlan: native - cidr: 12.0.0.0/24 - compute_interface: eth5 - controller_interface: eth6 - -#admin_network: -# enabled: true -# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond -# bridged_interface: '' #Interface to bridge to for installer VM -# bond_interfaces: '' #Interfaces to create bond with for installer VM -# compute_interface: nic4 #Interface used for this network on the compute node. Can either be logical nic name like "nic1" or real name like "eth1" -# controller_interface: nic4 #Interface used for this network on the controller node. Can either be logical nic name like "nic1" or real name like "eth1" -# vlan: native #VLAN tag to use, native means none -# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 -# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected -# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet -# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected -# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned -# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes) -#private_network: -# enabled: false #If disabled, internal api traffic will collapse to admin_network -#public_network: -# enabled: true #If disabled, public_network traffic will collapse to admin network -# network_type: '' -# bridged_interface: '' -# cidr: 192.168.37.0/24 -# gateway: 192.168.37.1 -# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron -# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet -# provisioner_ip: 192.168.37.1 -#storage_network: -# enabled: false #If disabled, storage_network traffic will collapse to admin network diff --git a/tests/config/network_settings_nic1_reserved.yaml b/tests/config/network_settings_nic1_reserved.yaml deleted file mode 100644 index 8abcfc85..00000000 --- a/tests/config/network_settings_nic1_reserved.yaml +++ /dev/null @@ -1,113 +0,0 @@ -# This configuration file defines Network Environment for a -# Baremetal Deployment of OPNFV. It contains default values -# for 4 following networks: -# -# - admin -# - private* -# - public -# - storage* -# -# *) optional networks -# -# Any values missing from this configuration file will be -# auto-detected by deployment script from the existing network -# configuration of the jumphost. -# -# Optional networks will be consolidated with the admin network -# if not explicitely configured. -# -# See short description of the networks in the comments below. -# - -# DNS Servers for all nodes, comma delimited list -dns_servers: ["8.8.8.8", "8.8.4.4"] - -# "admin" is the short name for Control Plane Network. -# During OPNFV deployment it is used for node provisioning so -# PXE boot should be enabled for the related interfaces on all -# the nodes in the OPNFV cluster. After the deployment this -# network is used as the OpenStack management network which -# carries e.g. communication between its internal components. -# -admin_network: - enabled: true - network_type: bridged - bridged_interface: '' - bond_interfaces: '' - usable_ip_range: 192.0.2.11,192.0.2.99 - gateway: 192.0.2.1 - provisioner_ip: 192.0.2.1 - cidr: 192.0.2.0/24 - dhcp_range: 192.0.2.2,192.0.2.10 - introspection_range: 192.0.2.100,192.0.2.120 - -# "private" is an optional network used as underlying physical -# network for virtual provider and tenant networks created by -# users. Traffic between virtual machines is carried by this -# network. -# -private_network: - enabled: true - vlan: native - cidr: 11.0.0.0/24 - compute_interface: enp0s4 - controller_interface: nic3 - -# "public" network is used for external connectivity. -# The external network provides Internet access for virtual -# machines. If floating IP range is defined for this network, -# floating IP addresses can be used for accessing virtual -# machines from outside of OPNFV cluster. Also external REST -# API calls use this network. -# -public_network: - enabled: true - network_type: '' - bridged_interface: '' - compute_interface: nic1 - controller_interface: enp0s3 - vlan: native - cidr: 192.168.37.0/24 - gateway: 192.168.37.1 - floating_ip_range: 192.168.37.200,192.168.37.220 - usable_ip_range: 192.168.37.10,192.168.37.199 - provisioner_ip: 192.168.37.1 - -# "storage" is an optional network used by storage backends. -# You can configure this network in order to reduce load on -# Control Plane Network. -# -storage_network: - enabled: true - vlan: native - cidr: 12.0.0.0/24 - compute_interface: eth5 - controller_interface: eth6 - -#admin_network: -# enabled: true -# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond -# bridged_interface: '' #Interface to bridge to for installer VM -# bond_interfaces: '' #Interfaces to create bond with for installer VM -# overcloud_compute_interface: nic4 #Interface used for this network on the compute node. Can either be logical nic name like "nic1" or real name like "eth1" -# overcloud_controller_interface: nic4 #Interface used for this network on the controller node. Can either be logical nic name like "nic1" or real name like "eth1" -# vlan: native #VLAN tag to use, native means none -# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 -# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected -# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet -# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected -# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned -# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes) -#private_network: -# enabled: false #If disabled, internal api traffic will collapse to admin_network -#public_network: -# enabled: true #If disabled, public_network traffic will collapse to admin network -# network_type: '' -# bridged_interface: '' -# cidr: 192.168.37.0/24 -# gateway: 192.168.37.1 -# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron -# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet -# provisioner_ip: 192.168.37.1 -#storage_network: -# enabled: false #If disabled, storage_network traffic will collapse to admin network diff --git a/tests/config/network_settings_nics_not_specified.yaml b/tests/config/network_settings_nics_not_specified.yaml deleted file mode 100644 index e5089435..00000000 --- a/tests/config/network_settings_nics_not_specified.yaml +++ /dev/null @@ -1,107 +0,0 @@ -# This configuration file defines Network Environment for a -# Baremetal Deployment of OPNFV. It contains default values -# for 4 following networks: -# -# - admin -# - private* -# - public -# - storage* -# -# *) optional networks -# -# Any values missing from this configuration file will be -# auto-detected by deployment script from the existing network -# configuration of the jumphost. -# -# Optional networks will be consolidated with the admin network -# if not explicitely configured. -# -# See short description of the networks in the comments below. -# - -# DNS Servers for all nodes, comma delimited list -dns_servers: ["8.8.8.8", "8.8.4.4"] - -# "admin" is the short name for Control Plane Network. -# During OPNFV deployment it is used for node provisioning so -# PXE boot should be enabled for the related interfaces on all -# the nodes in the OPNFV cluster. After the deployment this -# network is used as the OpenStack management network which -# carries e.g. communication between its internal components. -# -admin_network: - enabled: true - network_type: bridged - bridged_interface: '' - bond_interfaces: '' - usable_ip_range: 192.0.2.11,192.0.2.99 - gateway: 192.0.2.1 - provisioner_ip: 192.0.2.1 - cidr: 192.0.2.0/24 - dhcp_range: 192.0.2.2,192.0.2.10 - introspection_range: 192.0.2.100,192.0.2.120 - -# "private" is an optional network used as underlying physical -# network for virtual provider and tenant networks created by -# users. Traffic between virtual machines is carried by this -# network. -# -private_network: - enabled: true - vlan: native - cidr: 11.0.0.0/24 - -# "public" network is used for external connectivity. -# The external network provides Internet access for virtual -# machines. If floating IP range is defined for this network, -# floating IP addresses can be used for accessing virtual -# machines from outside of OPNFV cluster. Also external REST -# API calls use this network. -# -public_network: - enabled: true - network_type: '' - bridged_interface: '' - vlan: native - cidr: 192.168.37.0/24 - gateway: 192.168.37.1 - floating_ip_range: 192.168.37.200,192.168.37.220 - usable_ip_range: 192.168.37.10,192.168.37.199 - provisioner_ip: 192.168.37.1 - -# "storage" is an optional network used by storage backends. -# You can configure this network in order to reduce load on -# Control Plane Network. -# -storage_network: - enabled: true - vlan: native - cidr: 12.0.0.0/24 - -#admin_network: -# enabled: true -# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond -# bridged_interface: '' #Interface to bridge to for installer VM -# bond_interfaces: '' #Interfaces to create bond with for installer VM -# compute_interface: nic4 #Interface used for this network on the compute node. Can either be logical nic name like "nic1" or real name like "eth1" -# controller_interface: nic4 #Interface used for this network on the controller node. Can either be logical nic name like "nic1" or real name like "eth1" -# vlan: native #VLAN tag to use, native means none -# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20 -# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected -# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet -# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected -# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned -# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes) -#private_network: -# enabled: false #If disabled, internal api traffic will collapse to admin_network -#public_network: -# enabled: true #If disabled, public_network traffic will collapse to admin network -# network_type: '' -# bridged_interface: '' -# cidr: 192.168.37.0/24 -# gateway: 192.168.37.1 -# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron -# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet -# provisioner_ip: 192.168.37.1 -#storage_network: -# enabled: false #If disabled, storage_network traffic will collapse to admin network |