diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/network/network_settings.yaml | 45 | ||||
| -rw-r--r-- | config/network/network_settings_v6.yaml | 40 | ||||
| -rw-r--r-- | config/network/network_settings_vlans.yaml | 42 |
3 files changed, 59 insertions, 68 deletions
diff --git a/config/network/network_settings.yaml b/config/network/network_settings.yaml index ab9ed962..6cf9ae80 100644 --- a/config/network/network_settings.yaml +++ b/config/network/network_settings.yaml @@ -56,6 +56,7 @@ syslog: server: 10.128.1.24 transport: 'tcp' +# Common network settings networks: # Network configurations admin: # Admin configuration (pxe and jumpstart), enabled: true @@ -67,7 +68,9 @@ networks: # Network configurations ip: 192.0.2.1 # IP to assign to Installer VM on this network usable_ip_range: - 192.0.2.11 - - 192.0.2.99 # Usable ip range, if empty entire range is usable + - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be + # used for host bridge (i.e. br-admin). If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 dhcp_range: @@ -79,14 +82,14 @@ networks: # Network configurations members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic1 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface members: - nic1 # tenant: # Tenant network configuration enabled: true cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 - mtu: 64000 # Tenant network MTU + mtu: 1500 # Tenant network MTU overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. segmentation_type: vxlan # Tenant network segmentation type: @@ -106,7 +109,7 @@ networks: # Network configurations external: # Can contain 1 or more external networks - public: # "public" network will be the network the installer VM attaches to enabled: true - mtu: 64000 # Public network MTU + mtu: 1500 # Public network MTU installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: native @@ -117,10 +120,11 @@ networks: # Network configurations gateway: 192.168.37.1 floating_ip_range: - 192.168.37.200 - - 192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron + - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron usable_ip_range: - 192.168.37.10 - - 192.168.37.199 # Usable IP range on the public network, usually this is a shared subnet + - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host + # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) @@ -138,7 +142,7 @@ networks: # Network configurations gateway: 192.168.37.1 - private_cloud: # another external network enabled: false - mtu: 64000 + mtu: 1500 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: 101 @@ -149,10 +153,11 @@ networks: # Network configurations gateway: 192.168.38.1 floating_ip_range: - 192.168.38.200 - - 192.168.38.220 #Range to allocate to floating IPs for the public network with Neutron + - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron usable_ip_range: - 192.168.38.10 - - 192.168.38.199 # Usable IP range on the public network, usually this is a shared subnet + - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet. + # Cannot overlap with dhcp_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) @@ -173,15 +178,15 @@ networks: # Network configurations storage: # Storage network configuration enabled: true cidr: 12.0.0.0/24 # Subnet in CIDR format - mtu: 64000 # Tenant network MTU + mtu: 1500 # Storage network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) + phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: native members: - nic4 @@ -190,31 +195,23 @@ networks: # Network configurations enabled: false cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format vlan: 13 # VLAN tag to use for Overcloud hosts on this network - mtu: 64000 # Tenant network MTU + mtu: 1500 # Api network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) + phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: native members: - nic5 -# JOID specific settings -joid: - -# Compass specific settings -compass: - # Apex specific settings apex: networks: admin: introspection_range: - 192.0.2.100 - - 192.0.2.120 # Range used for introspection phase (examining nodes) -# Fuel specific settings -fuel: + - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or usable_ip_range. diff --git a/config/network/network_settings_v6.yaml b/config/network/network_settings_v6.yaml index bfce3ab4..b12614f1 100644 --- a/config/network/network_settings_v6.yaml +++ b/config/network/network_settings_v6.yaml @@ -56,6 +56,7 @@ syslog: server: 10.128.1.24 transport: 'tcp' +# Common network settings networks: # Network configurations admin: # Admin configuration (pxe and jumpstart), enabled: true @@ -67,26 +68,29 @@ networks: # Network configurations ip: 192.0.2.1 # IP to assign to Installer VM on this network usable_ip_range: - 192.0.2.11 - - 192.0.2.99 # Usable ip range, if empty entire range is usable + - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be + # used for host bridge (i.e. br-admin). + # If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 dhcp_range: - 192.0.2.2 - - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned + - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned. + # Cannot overlap with usable_ip_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic1 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface members: - nic1 # tenant: # Tenant network configuration enabled: true cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 - mtu: 64000 # Tenant network MTU + mtu: 1500 # Tenant network MTU overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. segmentation_type: vxlan # Tenant network segmentation type: @@ -106,7 +110,7 @@ networks: # Network configurations external: # Can contain 1 or more external networks - public: # "public" network will be the network the installer VM attaches to enabled: true - mtu: 64000 # Public network MTU + mtu: 1500 # Public network MTU installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: native @@ -117,7 +121,7 @@ networks: # Network configurations gateway: 2001:db8::1 floating_ip_range: - 2001:db8:0:0:0:0:0:2 - - 2001:db8:0:0:ffff:ffff:ffff:ffff + - 2001:db8:0:0:ffff:ffff:ffff:ffff # Floating IPs range to assign to the overcloud (External IPs to be NAT'ed to Tenant IP) nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) @@ -137,15 +141,15 @@ networks: # Network configurations storage: # Storage network configuration enabled: true cidr: fd00:fd00:fd00:2000::/64 # Subnet in CIDR format - mtu: 64000 # Tenant network MTU + mtu: 1500 # Storage network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) + phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: native members: - nic4 @@ -154,31 +158,23 @@ networks: # Network configurations enabled: true cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format vlan: 13 # VLAN tag to use for Overcloud hosts on this network - mtu: 64000 # Tenant network MTU + mtu: 1500 # Api network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC + phys_type: interface # Physical interface type (interface or bond) + vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: native members: - nic5 -# JOID specific settings -joid: - -# Compass specific settings -compass: - # Apex specific settings apex: networks: admin: introspection_range: - 192.0.2.100 - - 192.0.2.120 # Range used for introspection phase (examining nodes) -# Fuel specific settings -fuel: + - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or usable_ip_range. diff --git a/config/network/network_settings_vlans.yaml b/config/network/network_settings_vlans.yaml index beeae477..c5143641 100644 --- a/config/network/network_settings_vlans.yaml +++ b/config/network/network_settings_vlans.yaml @@ -56,6 +56,7 @@ syslog: server: 10.128.1.24 transport: 'tcp' +# Common network settings networks: # Network configurations admin: # Admin configuration (pxe and jumpstart), enabled: true @@ -67,26 +68,29 @@ networks: # Network configurations ip: 192.0.2.1 # IP to assign to Installer VM on this network usable_ip_range: - 192.0.2.11 - - 192.0.2.99 # Usable ip range, if empty entire range is usable + - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be + # used for host bridge (i.e. br-admin). If empty entire range is usable. + # Cannot overlap with dhcp_range. gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 dhcp_range: - 192.0.2.2 - - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned + - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned. + # Cannot overlap with usable_ip_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic1 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface members: - nic1 # tenant: # Tenant network configuration enabled: true cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 - mtu: 64000 # Tenant network MTU + mtu: 1500 # Tenant network MTU overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. segmentation_type: vxlan # Tenant network segmentation type: @@ -106,7 +110,7 @@ networks: # Network configurations external: # Can contain 1 or more external networks - public: # "public" network will be the network the installer VM attaches to enabled: true - mtu: 64000 # Public network MTU + mtu: 1500 # Public network MTU installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: 501 @@ -138,7 +142,7 @@ networks: # Network configurations gateway: 192.168.37.1 - private_cloud: # another external network enabled: false - mtu: 64000 + mtu: 1500 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: 501 @@ -152,7 +156,9 @@ networks: # Network configurations - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron usable_ip_range: - 192.168.38.10 - - 192.168.38.199 # Usable IP range on the public network, usually this is a shared subnet + - 192.168.38.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host + # bridge (i.e. br-public). If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) @@ -173,15 +179,15 @@ networks: # Network configurations storage: # Storage network configuration enabled: true cidr: 12.0.0.0/24 # Subnet in CIDR format - mtu: 64000 # Tenant network MTU + mtu: 1500 # Storage network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) + phys_type: interface # Physical interface type (interface or bond) vlan: 201 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: 201 members: - nic4 @@ -189,31 +195,23 @@ networks: # Network configurations api: # API network configuration enabled: false cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format - mtu: 64000 # Tenant network MTU + mtu: 1500 # Api network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: bond # Physical interface type (interface or bond) + phys_type: interface # Physical interface type (interface or bond) vlan: 101 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: bond + phys_type: interface vlan: 101 members: - nic5 -# JOID specific settings -joid: - -# Compass specific settings -compass: - # Apex specific settings apex: networks: admin: introspection_range: - 192.0.2.100 - - 192.0.2.120 # Range used for introspection phase (examining nodes) -# Fuel specific settings -fuel: + - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or usable_ip_range. |