diff options
Diffstat (limited to 'config/network/network_settings_vpp.yaml')
| -rw-r--r-- | config/network/network_settings_vpp.yaml | 301 |
1 files changed, 198 insertions, 103 deletions
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml index c6792157..f080af1d 100644 --- a/config/network/network_settings_vpp.yaml +++ b/config/network/network_settings_vpp.yaml @@ -1,3 +1,4 @@ +--- # This configuration file defines Network Environment for a # Baremetal Deployment of OPNFV. It contains default values # for 5 following networks: @@ -34,7 +35,7 @@ # communication. This should be used for IPv6 deployments. -#Meta data for the network configuration +# Meta data for the network configuration network-config-metadata: title: LF-POD-1 Network config version: 0.1 @@ -57,152 +58,245 @@ syslog: transport: 'tcp' # Common network settings -networks: # Network configurations - admin: # Admin configuration (pxe and jumpstart), +networks: + # Admin configuration (pxe and jumpstart) + admin: enabled: true - installer_vm: # Network settings for the Installer VM on admin network - nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + # Network settings for the Installer VM on admin network + installer_vm: + # Indicates if this VM will be bridged to an interface, or to a bond + nic_type: interface + # Interfaces to bridge for installer VM (use multiple values for bond) members: - - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) - vlan: native # VLAN tag to use for this network on Installer VM, native means none - ip: 192.0.2.1 # IP to assign to Installer VM on this network + - em1 + # VLAN tag to use for this network on Installer VM, native means none + vlan: native + # IP to assign to Installer VM on this network + ip: 192.0.2.1 + # Usable ip range for the overcloud node IPs (including VIPs) + # Last IP is used for host bridge (i.e. br-admin). + # If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.0.2.11 - - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be - # used for host bridge (i.e. br-admin). If empty entire range is usable. - # Cannot overlap with dhcp_range or introspection_range. - gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) - cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 + - 192.0.2.99 + # Gateway (only needed when public_network is disabled) + gateway: 192.0.2.1 + # Subnet in CIDR format 192.168.1.0/24 + cidr: 192.0.2.0/24 + # DHCP range for the admin network, automatically provisioned if empty dhcp_range: - 192.0.2.2 - - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - 192.0.2.10 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # Physical NIC members (Single value allowed for phys_type: interface) + members: - eth0 - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface members: - eth0 - # - tenant: # Tenant network configuration + + # Tenant network configuration + tenant: enabled: true - cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 - mtu: 1500 # Tenant network MTU - overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: - # VNI, VLAN-ID, etc. - segmentation_type: vxlan # Tenant network segmentation type: - # vlan, vxlan, gre - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface/bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) - phys_type: interface # Physical interface type (interface/bond) + # Subnet in CIDR format 192.168.1.0/24 + cidr: 11.0.0.0/24 + # Tenant network MTU + mtu: 1500 + # Tenant network Overlay segmentation ID range: + # VNI, VLAN-ID, etc. + overlay_id_range: 2,65535 + + # Tenant network segmentation type: + # vlan, vxlan, gre + segmentation_type: vxlan + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface/bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + members: + # Note logical name like nic1 not valid for fdio deployment yet. + - eth1 + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: + # Physical interface type (interface/bond) + phys_type: interface vlan: native + # Note: logicial names like nic1 are not valid for fdio deployment yet. members: - - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. - # - external: # Can contain 1 or more external networks - - public: # "public" network will be the network the installer VM attaches to + - eth1 + + # Can contain 1 or more external networks + external: + - public: enabled: true - mtu: 1500 # Public network MTU - installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) - nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + # Public network MTU + mtu: 1500 + # Network settings for the Installer VM on external network + # (note only valid on 'public' external network) + installer_vm: + # Indicates if this VM will be bridged to an interface, or to a bond + nic_type: interface vlan: native + # Interfaces to bridge for installer VM (use multiple values for bond) members: - - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) - ip: 192.168.37.1 # IP to assign to Installer VM on this network + - em1 + # IP to assign to Installer VM on this network + ip: 192.168.37.1 cidr: 192.168.37.0/24 gateway: 192.168.37.1 + # Range to allocate to floating IPs for the public network with Neutron floating_ip_range: - 192.168.37.200 - - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron + - 192.168.37.220 + # Usable ip range for the overcloud node IPs (including VIPs) + # Last IP will be used for host bridge (i.e. br-public). + # If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.168.37.10 - - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host - # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - 192.168.37.199 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + members: - eth2 - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface vlan: native members: - eth2 - external_overlay: # External network to be created in OpenStack by Services tenant - name: Public_internet - type: flat - gateway: 192.168.37.1 - - private_cloud: # another external network + # External network to be created in OpenStack by Services tenant + external_overlay: + name: Public_internet + type: flat + gateway: 192.168.37.1 + # another external network + # This is an example and not yet supported + - private_cloud: enabled: false mtu: 1500 - installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) - nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + # Network settings for the Installer VM on external network + # note only valid on 'public' external network + installer_vm: + # Indicates if this VM will be bridged to an interface, or to a bond + nic_type: interface vlan: 101 + # Interfaces to bridge for installer VM (use multiple values for bond) members: - - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) - ip: 192.168.38.1 # IP to assign to Installer VM on this network + - em1 + # IP to assign to Installer VM on this network + ip: 192.168.38.1 cidr: 192.168.38.0/24 gateway: 192.168.38.1 + # Range to allocate to floating IPs for the public network with Neutron floating_ip_range: - 192.168.38.200 - - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron + - 192.168.38.220 + # Usable IP range for overcloud nodes (including VIPs)i + # usually this is a shared subnet. + # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.168.38.10 - - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet. - # Cannot overlap with dhcp_range or introspection_range. - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: 101 # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + - 192.168.38.199 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) phys_type: interface + # VLAN tag to use with this NIC vlan: 101 + # Physical NIC members of this mappingi + # Single value allowed for phys_type: interface + # Note: logical names like nic1 are not valid for fdio deployment yet. members: - eth3 - external_overlay: # External network to be created in OpenStack by Services tenant - name: private_cloud - type: vlan - segmentation_id: 101 - gateway: 192.168.38.1 - # - storage: # Storage network configuration + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: + phys_type: interface + vlan: 101 + members: + - eth3 + # External network to be created in OpenStack by Services tenant + external_overlay: + name: private_cloud + type: vlan + segmentation_id: 101 + gateway: 192.168.38.1 + + # Storage network configuration + storage: enabled: true - cidr: 12.0.0.0/24 # Subnet in CIDR format - mtu: 1500 # Storage network MTU - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Subnet in CIDR format + cidr: 12.0.0.0/24 + # Storage network MTU + mtu: 1500 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) phys_type: interface + # VLAN tag to use with this NIC vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface members: + # Note logical names like nic1 not valid for fdio deployment yet. - eth3 - # - api: # API network configuration + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: + phys_type: interface + vlan: native + members: + - eth3 + + api: + # API network configuration enabled: false - cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format - vlan: 13 # VLAN tag to use for Overcloud hosts on this network - mtu: 1500 # Api network MTU - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - eth4 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Subnet in CIDR format + cidr: fd00:fd00:fd00:4000::/64 + # VLAN tag to use for Overcloud hosts on this network + vlan: 13 + # Api network MTU + mtu: 1500 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + # Note logical names like nic1 not valid for fdio deployment yet. + members: + - eth4 + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface vlan: native members: @@ -212,8 +306,9 @@ networks: # Network configurations apex: networks: admin: + # Range used for introspection phase (examining nodes). + # This cannot overlap with dhcp_range or overcloud_ip_range. + # for the overcloud default external network introspection_range: - 192.0.2.100 - - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range. - # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range - # for the overcloud default external network + - 192.0.2.120 |