summaryrefslogtreecommitdiffstats
path: root/config/network/network_settings_vlans.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'config/network/network_settings_vlans.yaml')
-rw-r--r--config/network/network_settings_vlans.yaml287
1 files changed, 202 insertions, 85 deletions
diff --git a/config/network/network_settings_vlans.yaml b/config/network/network_settings_vlans.yaml
index 40d6183e..beeae477 100644
--- a/config/network/network_settings_vlans.yaml
+++ b/config/network/network_settings_vlans.yaml
@@ -1,102 +1,219 @@
# This configuration file defines Network Environment for a
# Baremetal Deployment of OPNFV. It contains default values
-# for 4 following networks:
+# for 5 following networks:
#
# - admin
-# - private*
-# - public
+# - tenant*
+# - external*
# - storage*
-#
+# - api*
# *) optional networks
#
-# Any values missing from this configuration file will be
-# auto-detected by deployment script from the existing network
-# configuration of the jumphost.
-#
# Optional networks will be consolidated with the admin network
-# if not explicitely configured.
+# if not explicitly configured.
#
# See short description of the networks in the comments below.
#
-
# "admin" is the short name for Control Plane Network.
-# During OPNFV deployment it is used for node provisioning so
-# PXE boot should be enabled for the related interfaces on all
-# the nodes in the OPNFV cluster. After the deployment this
-# network is used as the OpenStack management network which
-# carries e.g. communication between its internal components.
+# This network should be IPv4 even it is an IPv6 deployment
+# IPv6 does not have PXE boot support.
+# During OPNFV deployment it is used for node provisioning which will require
+# PXE booting as well as running a DHCP server on this network. Be sure to
+# disable any other DHCP/TFTP server on this network.
#
-admin_network:
- enabled: true
- network_type: bridged
- bridged_interface: ''
- bond_interfaces: ''
- usable_ip_range: 192.0.2.11,192.0.2.99
- gateway: 192.0.2.1
- provisioner_ip: 192.0.2.1
- cidr: 192.0.2.0/24
- dhcp_range: 192.0.2.2,192.0.2.10
- introspection_range: 192.0.2.100,192.0.2.120
-
-# "private" is an optional network used as underlying physical
-# network for virtual provider and tenant networks created by
-# users. Traffic between virtual machines is carried by this
-# network.
+# "tenant" is the network used for tenant traffic.
#
-private_network:
- enabled: true
- vlan: 400
- cidr: 11.0.0.0/24
-
-# "public" network is used for external connectivity.
-# The external network provides Internet access for virtual
-# machines. If floating IP range is defined for this network,
-# floating IP addresses can be used for accessing virtual
-# machines from outside of OPNFV cluster. Also external REST
-# API calls use this network.
+# "external" is the network which should have internet or external
+# connectivity. External OpenStack networks will be configured to egress this
+# network. There can be multiple external networks, but only one assigned as
+# "public" which OpenStack public API's will register.
#
-public_network:
- enabled: true
- network_type: ''
- bridged_interface: ''
- vlan: 500
- cidr: 192.168.37.0/24
- gateway: 192.168.37.1
- floating_ip_range: 192.168.37.200,192.168.37.220
- usable_ip_range: 192.168.37.10,192.168.37.199
- provisioner_ip: 192.168.37.1
-
-# "storage" is an optional network used by storage backends.
-# You can configure this network in order to reduce load on
-# Control Plane Network.
+# "storage" is the network for storage I/O.
#
-storage_network:
- enabled: true
- vlan: 200
- cidr: 12.0.0.0/24
+# "api" is an optional network for splitting out OpenStack service API
+# communication. This should be used for IPv6 deployments.
+
+
+#Meta data for the network configuration
+network-config-metadata:
+ title: LF-POD-1 Network config
+ version: 0.1
+ created: Mon Dec 28 2015
+ comment: None
+
+# DNS Settings
+dns-domain: opnfvlf.org
+dns-search: opnfvlf.org
+dns_nameservers:
+ - 8.8.8.8
+ - 8.8.4.4
+# NTP servers
+ntp:
+ - 0.se.pool.ntp.org
+ - 1.se.pool.ntp.org
+# Syslog server
+syslog:
+ server: 10.128.1.24
+ transport: 'tcp'
+
+networks: # Network configurations
+ admin: # Admin configuration (pxe and jumpstart),
+ enabled: true
+ installer_vm: # Network settings for the Installer VM on admin network
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ vlan: native # VLAN tag to use for this network on Installer VM, native means none
+ ip: 192.0.2.1 # IP to assign to Installer VM on this network
+ usable_ip_range:
+ - 192.0.2.11
+ - 192.0.2.99 # Usable ip range, if empty entire range is usable
+ gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
+ cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
+ dhcp_range:
+ - 192.0.2.2
+ - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - nic1
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: bond
+ members:
+ - nic1
+ #
+ tenant: # Tenant network configuration
+ enabled: true
+ cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
+ mtu: 64000 # Tenant network MTU
+ overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
+ # VNI, VLAN-ID, etc.
+ segmentation_type: vxlan # Tenant network segmentation type:
+ # vlan, vxlan, gre
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: 401 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - nic1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: 401
+ members:
+ - nic1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
+ #
+ external: # Can contain 1 or more external networks
+ - public: # "public" network will be the network the installer VM attaches to
+ enabled: true
+ mtu: 64000 # Public network MTU
+ installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ vlan: 501
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ ip: 192.168.37.12 # IP to assign to Installer VM on this network
+ cidr: 192.168.37.0/24
+ gateway: 192.168.37.1
+ floating_ip_range:
+ - 192.168.37.200
+ - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron
+ usable_ip_range:
+ - 192.168.37.10
+ - 192.168.37.199 # Usable IP range on the public network, usually this is a shared subnet
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: 501 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - nic1
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: 501
+ members:
+ - nic1
+ external_overlay: # External network to be created in OpenStack by Services tenant
+ name: Public_internet
+ type: flat
+ gateway: 192.168.37.1
+ - private_cloud: # another external network
+ enabled: false
+ mtu: 64000
+ installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ vlan: 501
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ ip: 192.168.38.12 # IP to assign to Installer VM on this network
+ cidr: 192.168.38.0/24
+ gateway: 192.168.38.1
+ floating_ip_range:
+ - 192.168.38.200
+ - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron
+ usable_ip_range:
+ - 192.168.38.10
+ - 192.168.38.199 # Usable IP range on the public network, usually this is a shared subnet
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: 502 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: 502
+ members:
+ - eth1
+ external_overlay: # External network to be created in OpenStack by Services tenant
+ name: private_cloud
+ type: vlan
+ segmentation_id: 101
+ gateway: 192.168.38.1
+ #
+ storage: # Storage network configuration
+ enabled: true
+ cidr: 12.0.0.0/24 # Subnet in CIDR format
+ mtu: 64000 # Tenant network MTU
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: bond # Physical interface type (interface or bond)
+ vlan: 201 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: bond
+ vlan: 201
+ members:
+ - nic4
+ #
+ api: # API network configuration
+ enabled: false
+ cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
+ mtu: 64000 # Tenant network MTU
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: bond # Physical interface type (interface or bond)
+ vlan: 101 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: bond
+ vlan: 101
+ members:
+ - nic5
+
+# JOID specific settings
+joid:
+
+# Compass specific settings
+compass:
-#admin_network:
-# enabled: true
-# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond
-# bridged_interface: '' #Interface to bridge to for installer VM
-# bond_interfaces: '' #Interfaces to create bond with for installer VM
-# vlan: native #VLAN tag to use, native means none
-# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20
-# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected
-# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet
-# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected
-# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned
-# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes)
-#private_network:
-# enabled: false #If disabled, internal api traffic will collapse to admin_network
-#public_network:
-# enabled: true #If disabled, public_network traffic will collapse to admin network
-# network_type: ''
-# bridged_interface: ''
-# cidr: 192.168.37.0/24
-# gateway: 192.168.37.1
-# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron
-# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet
-# provisioner_ip: 192.168.37.1
-#storage_network:
-# enabled: false #If disabled, storage_network traffic will collapse to admin network
+# Apex specific settings
+apex:
+ networks:
+ admin:
+ introspection_range:
+ - 192.0.2.100
+ - 192.0.2.120 # Range used for introspection phase (examining nodes)
+# Fuel specific settings
+fuel: