diff options
Diffstat (limited to 'config/network/network_settings_v6.yaml')
| -rw-r--r-- | config/network/network_settings_v6.yaml | 239 |
1 files changed, 157 insertions, 82 deletions
diff --git a/config/network/network_settings_v6.yaml b/config/network/network_settings_v6.yaml index 54c4113f..c7e808c3 100644 --- a/config/network/network_settings_v6.yaml +++ b/config/network/network_settings_v6.yaml @@ -1,3 +1,4 @@ +--- # This configuration file defines Network Environment for a # Baremetal Deployment of OPNFV. It contains default values # for 5 following networks: @@ -34,7 +35,7 @@ # communication. This should be used for IPv6 deployments. -#Meta data for the network configuration +# Meta data for the network configuration network-config-metadata: title: LF-POD-1 Network config version: 0.1 @@ -57,115 +58,188 @@ syslog: transport: 'tcp' # Common network settings -networks: # Network configurations - admin: # Admin configuration (pxe and jumpstart), +networks: + # Admin configuration (pxe and jumpstart) + admin: enabled: true - installer_vm: # Network settings for the Installer VM on admin network - nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + # Network settings for the Installer VM on admin network + installer_vm: + # Indicates if this VM will be bridged to an interface, or to a bond + nic_type: interface + # Interfaces to bridge for installer VM (use multiple values for bond) members: - - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) - vlan: native # VLAN tag to use for this network on Installer VM, native means none - ip: 192.0.2.1 # IP to assign to Installer VM on this network + - em1 + # VLAN tag to use for this network on Installer VM, native means none + vlan: native + # IP to assign to Installer VM on this network + ip: 192.0.2.1 + # Usable ip range for the overcloud node IPs (including VIPs) + # Last IP is used for host bridge (i.e. br-admin). + # If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.0.2.11 - - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be - # used for host bridge (i.e. br-admin). - # If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. - gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) - cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 + - 192.0.2.99 + # Gateway (only needed when public_network is disabled) + gateway: 192.0.2.1 + # Subnet in CIDR format 192.168.1.0/24 + cidr: 192.0.2.0/24 + # DHCP range for the admin network, automatically provisioned if empty dhcp_range: - 192.0.2.2 - - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned. - # Cannot overlap with overcloud_ip_range or introspection_range. - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - 192.0.2.10 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # Physical NIC members (Single value allowed for phys_type: interface) + members: - nic1 - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface members: - nic1 - # - tenant: # Tenant network configuration + + # Tenant network configuration + tenant: enabled: true - cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 - mtu: 1500 # Tenant network MTU - overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: - # VNI, VLAN-ID, etc. - segmentation_type: vxlan # Tenant network segmentation type: - # vlan, vxlan, gre - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - nic2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Subnet in CIDR format 192.168.1.0/24 + cidr: 11.0.0.0/24 + # Tenant network MTU + mtu: 1500 + # Tenant network Overlay segmentation ID range: + # VNI, VLAN-ID, etc. + overlay_id_range: 2,65535 + + # Tenant network segmentation type: + # vlan, vxlan, gre + segmentation_type: vxlan + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface/bond) phys_type: interface + # UIO driver to use for DPDK scenarios. + # The value is ignored for non-DPDK scenarios. + uio_driver: uio_pci_generic + # VLAN tag to use with this NIC vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface members: - - nic2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - # - external: # Can contain 1 or more external networks - - public: # "public" network will be the network the installer VM attaches to + # Note logical name like nic1 not valid for fdio deployment yet. + - nic2 + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: + # Physical interface type (interface/bond) + phys_type: interface + vlan: native + # Note: logicial names like nic1 are not valid for fdio deployment yet. + members: + - nic2 + + # Can contain 1 or more external networks + external: + - public: enabled: true - mtu: 1500 # Public network MTU - installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) - nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + # Public network MTU + mtu: 1500 + # Network settings for the Installer VM on external network + # (note only valid on 'public' external network) + installer_vm: + # Indicates if this VM will be bridged to an interface, or to a bond + nic_type: interface vlan: native + # Interfaces to bridge for installer VM (use multiple values for bond) members: - - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) - ip: 2001:db8::1 # IP to assign to Installer VM on this network + - em1 + # IP to assign to Installer VM on this network + ip: 2001:db8::1 cidr: 2001:db8::0/64 gateway: 2001:db8::1 + # Range to allocate to floating IPs for the public network with Neutron floating_ip_range: - - 2001:db8:0:0:0:0:0:2 - - 2001:db8:0:0:ffff:ffff:ffff:ffff # Floating IPs range to assign to the overcloud (External IPs to be NAT'ed to Tenant IP) - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - 2001:db8:0:0:0:0:0:2 + - 2001:db8:0:0:ffff:ffff:ffff:ffff + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + members: - nic3 - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface vlan: native members: - nic3 - external_overlay: # External network to be created in OpenStack by Services tenant - name: Public_internet - type: flat - gateway: 2001:db8::1 - # - storage: # Storage network configuration + # External network to be created in OpenStack by Services tenant + external_overlay: + name: Public_internet + type: flat + gateway: 2001:db8::1 + + # Storage network configuration + storage: enabled: true - cidr: fd00:fd00:fd00:2000::/64 # Subnet in CIDR format - mtu: 1500 # Storage network MTU - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - nic4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Subnet in CIDR format + cidr: fd00:fd00:fd00:2000::/64 + # Storage network MTU + mtu: 1500 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + members: + # Note logical names like nic1 not valid for fdio deployment yet. + - nic4 + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface vlan: native members: - nic4 - # - api: # API network configuration + + api: + # API network configuration enabled: true - cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format - vlan: 13 # VLAN tag to use for Overcloud hosts on this network - mtu: 1500 # Api network MTU - nic_mapping: # Mapping of network configuration for Overcloud Nodes - compute: # Mapping for compute profile (nodes that will be used as Compute nodes) - phys_type: interface # Physical interface type (interface or bond) - vlan: native # VLAN tag to use with this NIC - members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" - controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + # Subnet in CIDR format + cidr: fd00:fd00:fd00:4000::/64 + # VLAN tag to use for Overcloud hosts on this network + vlan: 13 + # Api network MTU + mtu: 1500 + # Mapping of network configuration for Overcloud Nodes + nic_mapping: + # Mapping for compute profile (nodes assigned as Compute nodes) + compute: + # Physical interface type (interface or bond) + phys_type: interface + # VLAN tag to use with this NIC + vlan: native + # Physical NIC members of this mapping + # Single value allowed for phys_type: interface + # Note logical names like nic1 not valid for fdio deployment yet. + members: + - nic5 + # Mapping for controller profile (nodes assigned as Controller nodes) + controller: phys_type: interface vlan: native members: @@ -175,8 +249,9 @@ networks: # Network configurations apex: networks: admin: + # Range used for introspection phase (examining nodes). + # This cannot overlap with dhcp_range or overcloud_ip_range. + # for the overcloud default external network introspection_range: - 192.0.2.100 - - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range. - # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range - # for the overcloud default external network + - 192.0.2.120 |