diff options
Diffstat (limited to 'ci')
| -rwxr-xr-x | ci/build.sh | 11 | ||||
| -rwxr-xr-x | ci/clean.sh | 8 | ||||
| -rwxr-xr-x | ci/deploy.sh | 139 |
3 files changed, 100 insertions, 58 deletions
diff --git a/ci/build.sh b/ci/build.sh index 7e080bed..e6870558 100755 --- a/ci/build.sh +++ b/ci/build.sh @@ -35,6 +35,7 @@ CACHE_DEST="" CACHE_DIR="cache" CACHE_NAME="apex-cache" MAKE_TARGETS="images" +REQUIRED_PKGS="rpm-build python-docutils" parse_cmdline() { while [ "${1:0:1}" = "-" ] @@ -82,6 +83,16 @@ run_make() { parse_cmdline "$@" +# Install build dependencies +for pkg in $REQUIRED_PKGS; do + if ! rpm -q $pkg > /dev/null; then + if ! sudo yum -y install $pkg > /dev/null; then + echo "Required package $pkg missing and installation failed." + exit 1 + fi + fi +done + if [ -n "$RELEASE" ]; then MAKE_ARGS+="RELEASE=$RELEASE "; fi # Get the Old Cache diff --git a/ci/clean.sh b/ci/clean.sh index 42090069..368ce8bc 100755 --- a/ci/clean.sh +++ b/ci/clean.sh @@ -20,6 +20,7 @@ source $CONFIG/lib/common-functions.sh vm_index=4 ovs_bridges="br-admin br-private br-public br-storage" +OPNFV_NETWORK_TYPES="admin_network private_network public_network storage_network" # Clean off instack/undercloud VM for vm in instack undercloud; do @@ -39,10 +40,13 @@ for i in $(seq 0 $vm_index); do rm -f /var/lib/libvirt/images/baremetal${i}.qcow2 2> /dev/null done +for network in ${OPNFV_NETWORK_TYPES}; do + virsh net-destroy ${network} 2> /dev/null + virsh net-undefine ${network} 2> /dev/null +done + # Clean off created bridges for bridge in ${ovs_bridges}; do - virsh net-destroy ${bridge} 2> /dev/null | xargs echo -n - virsh net-undefine ${bridge} 2> /dev/null | xargs echo -n if detach_interface_from_ovs ${bridge} 2> /dev/null; then ovs-vsctl del-br ${bridge} 2> /dev/null fi diff --git a/ci/deploy.sh b/ci/deploy.sh index 9cdd8297..18f96319 100755 --- a/ci/deploy.sh +++ b/ci/deploy.sh @@ -33,6 +33,7 @@ debug="FALSE" declare -i CNT declare UNDERCLOUD declare -A deploy_options_array +declare -a performance_options declare -A NET_MAP SSH_OPTIONS=(-o StrictHostKeyChecking=no -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null -o LogLevel=error) @@ -102,50 +103,31 @@ parse_setting_value() { local mystr=$1 echo $(echo $mystr | grep -Eo "\=.*$" | tr -d '=') } + ##parses network settings yaml into globals parse_network_settings() { + local output if output=$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py parse_net_settings -n $NETSETS -i $net_isolation_enabled); then - eval "$output" echo -e "${blue}${output}${reset}" + eval "$output" else + echo -e "${red}ERROR: Failed to parse network settings file $NETSETS ${reset}" exit 1 fi - } -##parses deploy settings yaml into globals and options array -##params: none -##usage: parse_deploy_settings + +##parses deploy settings yaml into globals parse_deploy_settings() { - local global_prefix="deploy_global_params_" - local options_prefix="deploy_deploy_options_" - local myvar myvalue - local settings=$(parse_yaml $DEPLOY_SETTINGS_FILE "deploy_") - - for this_setting in $settings; do - if contains_prefix $this_setting $global_prefix; then - myvar=$(parse_setting_var $this_setting $global_prefix) - if [ -z "$myvar" ]; then - echo -e "${red}ERROR: while parsing ${DEPLOY_SETTINGS_FILE} for setting: ${this_setting}${reset}" - fi - myvalue=$(parse_setting_value $this_setting) - # Do not override variables set by cmdline - if [ -z "$(eval echo \$$myvar)" ]; then - eval "$myvar=\$myvalue" - echo -e "${blue}Global parameter set: ${myvar}:${myvalue}${reset}" - else - echo -e "${blue}Global parameter already set: ${myvar}${reset}" - fi - elif contains_prefix $this_setting $options_prefix; then - myvar=$(parse_setting_var $this_setting $options_prefix) - if [ -z "$myvar" ]; then - echo -e "${red}ERROR: while parsing ${DEPLOY_SETTINGS_FILE} for setting: ${this_setting}${reset}" - fi - myvalue=$(parse_setting_value $this_setting) - deploy_options_array[$myvar]=$myvalue - echo -e "${blue}Deploy option set: ${myvar}:${myvalue}${reset}" - fi - done + local output + if output=$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py parse-deploy-settings -f $DEPLOY_SETTINGS_FILE); then + echo -e "${blue}${output}${reset}" + eval "$output" + else + echo -e "${red}ERROR: Failed to parse deploy settings file $DEPLOY_SETTINGS_FILE ${reset}" + exit 1 + fi } + ##parses baremetal yaml settings into compatible json ##writes the json to $CONFIG/instackenv_tmp.json ##params: none @@ -292,10 +274,11 @@ function configure_deps { virsh net-list --all | grep -E "default\s+active" > /dev/null || virsh net-start default virsh net-list --all | grep -E "default\s+active\s+yes" > /dev/null || virsh net-autostart --network default - for network in ${OPNFV_NETWORK_TYPES}; do - echo "${blue}INFO: Creating Virsh Network: $network & OVS Bridge: ${NET_MAP[$network]}${reset}" - ovs-vsctl list-br | grep ${NET_MAP[$network]} > /dev/null || ovs-vsctl add-br ${NET_MAP[$network]} - virsh net-list --all | grep $network > /dev/null || (cat > ${libvirt_dir}/apex-virsh-net.xml && virsh net-define ${libvirt_dir}/apex-virsh-net.xml) << EOF + if [[ -z "$virtual" || "$virtual" == "FALSE" ]]; then + for network in ${OPNFV_NETWORK_TYPES}; do + echo "${blue}INFO: Creating Virsh Network: $network & OVS Bridge: ${NET_MAP[$network]}${reset}" + ovs-vsctl list-br | grep "^${NET_MAP[$network]}$" > /dev/null || ovs-vsctl add-br ${NET_MAP[$network]} + virsh net-list --all | grep $network > /dev/null || (cat > ${libvirt_dir}/apex-virsh-net.xml && virsh net-define ${libvirt_dir}/apex-virsh-net.xml) << EOF <network> <name>$network</name> <forward mode='bridge'/> @@ -303,21 +286,18 @@ function configure_deps { <virtualport type='openvswitch'/> </network> EOF - if ! (virsh net-list --all | grep $network > /dev/null); then - echo "${red}ERROR: unable to create network: ${network}${reset}" - exit 1; - fi - rm -f ${libvirt_dir}/apex-virsh-net.xml &> /dev/null; - virsh net-list | grep -E "$network\s+active" > /dev/null || virsh net-start $network - virsh net-list | grep -E "$network\s+active\s+yes" > /dev/null || virsh net-autostart --network $network - done + if ! (virsh net-list --all | grep $network > /dev/null); then + echo "${red}ERROR: unable to create network: ${network}${reset}" + exit 1; + fi + rm -f ${libvirt_dir}/apex-virsh-net.xml &> /dev/null; + virsh net-list | grep -E "$network\s+active" > /dev/null || virsh net-start $network + virsh net-list | grep -E "$network\s+active\s+yes" > /dev/null || virsh net-autostart --network $network + done - echo -e "${blue}INFO: Bridges set: ${reset}" - ovs-vsctl list-br - echo -e "${blue}INFO: virsh networks set: ${reset}" - virsh net-list + echo -e "${blue}INFO: Bridges set: ${reset}" + ovs-vsctl list-br - if [[ -z "$virtual" || "$virtual" == "FALSE" ]]; then # bridge interfaces to correct OVS instances for baremetal deployment for network in ${enabled_network_list}; do if [[ "$network" != "admin_network" && "$network" != "public_network" ]]; then @@ -337,8 +317,31 @@ EOF exit 1 fi done + else + for network in ${OPNFV_NETWORK_TYPES}; do + echo "${blue}INFO: Creating Virsh Network: $network${reset}" + virsh net-list --all | grep $network > /dev/null || (cat > ${libvirt_dir}/apex-virsh-net.xml && virsh net-define ${libvirt_dir}/apex-virsh-net.xml) << EOF +<network ipv6='yes'> +<name>$network</name> +<bridge name='${NET_MAP[$network]}'/> +</network> +EOF + if ! (virsh net-list --all | grep $network > /dev/null); then + echo "${red}ERROR: unable to create network: ${network}${reset}" + exit 1; + fi + rm -f ${libvirt_dir}/apex-virsh-net.xml &> /dev/null; + virsh net-list | grep -E "$network\s+active" > /dev/null || virsh net-start $network + virsh net-list | grep -E "$network\s+active\s+yes" > /dev/null || virsh net-autostart --network $network + done + + echo -e "${blue}INFO: Bridges set: ${reset}" + brctl show fi + echo -e "${blue}INFO: virsh networks set: ${reset}" + virsh net-list + # ensure storage pool exists and is started virsh pool-list --all | grep default > /dev/null || virsh pool-define-as --name default dir --target /var/lib/libvirt/images virsh pool-list | grep -Eo "default\s+active" > /dev/null || (virsh pool-autostart default; virsh pool-start default) @@ -638,7 +641,7 @@ function configure_network_environment { ##Copy over the glance images and instackenv json file ##params: none function configure_undercloud { - + local controller_nic_template compute_nic_template echo echo "Copying configuration files to Undercloud" if [[ "$net_isolation_enabled" == "TRUE" ]]; then @@ -646,13 +649,22 @@ function configure_undercloud { echo -e "${blue}Network Environment set for Deployment: ${reset}" cat $CONFIG/network-environment.yaml scp ${SSH_OPTIONS[@]} $CONFIG/network-environment.yaml "stack@$UNDERCLOUD": + if ! controller_nic_template=$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py nic_template -d $CONFIG -f nics-controller.yaml.jinja2 -n "$enabled_network_list" -e $ext_net_type -af $ip_addr_family); then + echo -e "${red}ERROR: Failed to generate controller NIC heat template ${reset}" + exit 1 + fi + + if ! compute_nic_template=$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py nic_template -d $CONFIG -f nics-compute.yaml.jinja2 -n "$enabled_network_list" -e $ext_net_type -af $ip_addr_family); then + echo -e "${red}ERROR: Failed to generate compute NIC heat template ${reset}" + exit 1 + fi ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" << EOI mkdir nics/ cat > nics/controller.yaml << EOF -$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py nic_template -d $CONFIG -f nics-controller.yaml.jinja2 -n "$enabled_network_list" -e $ext_net_type -af $ip_addr_family) +$controller_nic_template EOF cat > nics/compute.yaml << EOF -$(python3.4 -B $CONFIG/lib/python/apex-python-utils.py nic_template -d $CONFIG -f nics-compute.yaml.jinja2 -n "$enabled_network_list" -e $ext_net_type -af $ip_addr_family) +$compute_nic_template EOF EOI fi @@ -784,12 +796,12 @@ function undercloud_prep_overcloud_deploy { elif [ "${deploy_options_array['sdn_controller']}" == 'opencontrail' ]; then echo -e "${red}ERROR: OpenContrail is currently unsupported...exiting${reset}" exit 1 - elif [[ -z "${deploy_options_array['sdn_controller']}" || "${deploy_options_array['sdn_controller']}" == 'false' ]]; then + elif [[ -z "${deploy_options_array['sdn_controller']}" || "${deploy_options_array['sdn_controller']}" == 'False' ]]; then echo -e "${blue}INFO: SDN Controller disabled...will deploy nosdn scenario${reset}" SDN_IMAGE=opendaylight else echo "${red}Invalid sdn_controller: ${deploy_options_array['sdn_controller']}${reset}" - echo "${red}Valid choices are opendaylight, opendaylight-external, onos, opencontrail, false, or null${reset}" + echo "${red}Valid choices are opendaylight, opendaylight-external, onos, opencontrail, False, or null${reset}" exit 1 fi @@ -805,6 +817,17 @@ function undercloud_prep_overcloud_deploy { ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "rm -f overcloud-full.qcow2" scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full-${SDN_IMAGE}.qcow2 "stack@$UNDERCLOUD":overcloud-full.qcow2 + # Push performance options to subscript to modify per-role images as needed + for option in "${performance_options[@]}" ; do + echo -e "${blue}Setting performance option $option${reset}" + ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" "bash build_perf_image.sh $option" + done + + # Add performance deploy options if they have been set + if [ ! -z "${deploy_options_array['performance']}" ]; then + DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/numa.yaml" + fi + # make sure ceph is installed DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/storage-environment.yaml" @@ -856,6 +879,9 @@ source stackrc set -o errexit echo "Uploading overcloud glance images" openstack overcloud image upload + +bash -x set_perf_images.sh ${performance_roles} + echo "Configuring undercloud and discovering nodes" openstack baremetal import --json instackenv.json openstack baremetal configure boot @@ -1182,6 +1208,7 @@ main() { exit 1 fi if [ -n "$DEPLOY_SETTINGS_FILE" ]; then + echo -e "${blue}INFO: Parsing deploy settings file...${reset}" parse_deploy_settings fi setup_undercloud_vm |