diff options
author | 2016-08-19 16:39:06 +0200 | |
---|---|---|
committer | 2016-08-19 16:39:06 +0200 | |
commit | 1e4742787c6c45b44f5e49de03ec8b1b1075c04e (patch) | |
tree | a58b62aaf2637676066e26517ecda0e1b07f6f23 /docs/installation-instructions/virtualinstall.rst | |
parent | 4862f3b57479d64c5408268cc2086b53e4e97b81 (diff) |
Renamed install instructions folder according to docs directive
Change-Id: I8970be0bcbed501e43d6fb76af1278881274f69a
Signed-off-by: Sofia Wallin <sofia.wallin@ericsson.com>
Diffstat (limited to 'docs/installation-instructions/virtualinstall.rst')
-rw-r--r-- | docs/installation-instructions/virtualinstall.rst | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/docs/installation-instructions/virtualinstall.rst b/docs/installation-instructions/virtualinstall.rst deleted file mode 100644 index 01971893..00000000 --- a/docs/installation-instructions/virtualinstall.rst +++ /dev/null @@ -1,69 +0,0 @@ -Installation High-Level Overview - Virtual Deployment -===================================================== - -The VM nodes deployment operates almost the same way as the bare metal -deployment with a few differences. ``opnfv-deploy`` still deploys an -undercloud VM. In addition to the undercloud VM a collection of VMs -(3 control nodes + 2 compute for an HA deployment or 1 control node and 1 -or more compute nodes for a non-HA Deployment) will be defined for the target -OPNFV deployment. The part of the toolchain that executes IPMI power -instructions calls into libvirt instead of the IPMI interfaces on baremetal -servers to operate the power managment. These VMs are then provisioned with -the same disk images and configuration that baremetal would be. To Triple-O -these nodes look like they have just built and registered the same way as bare -metal nodes, the main difference is the use of a libvirt driver for the power -management. Finally, the default network_settings file will deploy without -modification. Customizations are welcome but not needed if a generic set of -network_settings are acceptable. - -Installation Guide - Virtual Deployment -======================================= - -This section goes step-by-step on how to correctly install and provision the -OPNFV target system to VM nodes. - -Install Jumphost ----------------- - -Follow the instructions in the `Install Bare Metal Jumphost`_ section. - -Running ``opnfv-deploy`` ------------------------- - -You are now ready to deploy OPNFV! -``opnfv-deploy`` has virtual deployment capability that includes all of -the configuration nessesary to deploy OPNFV with no modifications. - -If no modifications are made to the included configurations the target -environment will deploy with the following architecture: - - - 1 undercloud VM - - - The option of 3 control and 2 or more compute VMs (HA Deploy / default) - or 1 control and 1 or more compute VM (Non-HA deploy / pass -n) - - - 1-5 networks: provisioning, private tenant networking, external, storage - and internal API. The API, storage and tenant networking networks can be - collapsed onto the provisioning network. - -Follow the steps below to execute: - -1. ``sudo opnfv-deploy -v [ --virtual-computes n ] - [ --virtual-cpus n ] [ --virtual-ram n ] [ --flat ] - -n network_settings.yaml -i inventory.yaml -d deploy_settings.yaml`` - -2. It will take approximately 45 minutes to an hour to stand up undercloud, - define the target virtual machines, configure the deployment and execute - the deployment. You will notice different outputs in your shell. - -3. When the deployment is complete the IP for the undercloud and a url for the - OpenStack dashboard will be displayed - -Verifying the Setup - VMs -------------------------- - -To verify the set you can follow the instructions in the `Verifying the Setup`_ -section. - -.. _`Install Bare Metal Jumphost`: baremetal.html -.. _`Verifying the Setup`: verification.html |