Fix nosdn fdio scenario

- Update networking-vpp to use master branch
- Update THT vpp ml2 environment file with correct parameters
- Update external network creation command to use 'externa' as
  provider network name.
- Remove vpp network settings file as it's not used

apex-tripleo-heat-templates: Ia25db8456f1ad6beb96c7b9b5f318b166ef4576a
apex-puppet-tripleo: I231054a433eb7e598a6e24f6eaea02d476e776de

Change-Id: I4a1f68c75ae3b7d2a5b347d05abf0d025e8b116b
Signed-off-by: Feng Pan <fpan@redhat.com>

2 files changed, 6 insertions, 318 deletions

diff --git a/config/network/network_settings.yaml b/config/network/network_settings.yaml
index c2d9bc90..a8ddca1a 100644
--- a/config/network/network_settings.yaml
+++ b/config/network/network_settings.yaml
@@ -181,6 +181,9 @@ networks:
         # Mapping for compute profile (nodes assigned as Compute nodes)
         compute:
           # Physical interface type (interface or bond)
+          # Note that this phys_type for external network will be changed
+          # to vpp_interface for odl_fdio scenarios and linux_bridge for
+          # nosdn_fdio scenarios.
           phys_type: ovs_bridge
           # VLAN tag to use with this NIC
           vlan: native
@@ -190,6 +193,9 @@ networks:
             - eth2
         # Mapping for controller profile (nodes assigned as Controller nodes)
         controller:
+          # Note that this phys_type for external network will be changed
+          # to vpp_interface for odl_fdio scenarios and linux_bridge for
+          # nosdn_fdio scenarios.
           phys_type: ovs_bridge
           vlan: native
           members:
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml
deleted file mode 100644
index a40158ea..00000000
--- a/config/network/network_settings_vpp.yaml
+++ /dev/null
@@ -1,318 +0,0 @@
----
-# This configuration file defines Network Environment for a
-# Baremetal Deployment of OPNFV. It contains default values
-# for 5 following networks:
-#
-# - admin
-# - tenant*
-# - external*
-# - storage*
-# - api*
-# *) optional networks
-#
-# Optional networks will be consolidated with the admin network
-# if not explicitly configured.
-#
-# See short description of the networks in the comments below.
-#
-# "admin" is the short name for Control Plane Network.
-# This network should be IPv4 even it is an IPv6 deployment
-# IPv6 does not have PXE boot support.
-# During OPNFV deployment it is used for node provisioning which will require
-# PXE booting as well as running a DHCP server on this network.  Be sure to
-# disable any other DHCP/TFTP server on this network.
-#
-# "tenant" is the network used for tenant traffic.
-#
-# "external" is the network which should have internet or external
-# connectivity.  External OpenStack networks will be configured to egress this
-# network.  There can be multiple external networks, but only one assigned as
-# "public" which OpenStack public API's will register.
-#
-# "storage" is the network for storage I/O.
-#
-# "api" is an optional network for splitting out OpenStack service API
-# communication.  This should be used for IPv6 deployments.
-
-
-# Meta data for the network configuration
-network-config-metadata:
-  title: LF-POD-1 Network config
-  version: 0.1
-  created: Mon Dec 28 2015
-  comment: None
-
-# DNS Settings
-dns-domain: opnfvlf.org
-dns-search: opnfvlf.org
-dns_nameservers:
-  - 8.8.8.8
-  - 8.8.4.4
-# NTP servers
-ntp:
-  - 0.se.pool.ntp.org
-  - 1.se.pool.ntp.org
-# Syslog server
-syslog:
-  server: 10.128.1.24
-  transport: 'tcp'
-
-# http(s) proxy settings added to /etc/environment of uc and oc nodes
-# http_proxy: http://proxy.server:8080
-# https_proxy: https://proxy.server:8081
-
-# Common network settings
-networks:
-  # Admin configuration (pxe and jumpstart)
-  admin:
-    enabled: true
-    # Network settings for the Installer VM on admin network
-    installer_vm:
-      # Indicates if this VM will be bridged to an interface, or to a bond
-      nic_type: interface
-      # Interfaces to bridge for installer VM (use multiple values for bond)
-      members:
-        - em1
-      # VLAN tag to use for this network on Installer VM, native means none
-      vlan: native
-      # IP to assign to Installer VM on this network
-      ip: 192.0.2.1
-    # Usable ip range for the overcloud node IPs (including VIPs)
-    # Last IP is used for host bridge (i.e. br-admin).
-    # If empty entire range is usable.
-    # Cannot overlap with dhcp_range or introspection_range.
-    overcloud_ip_range:
-      - 192.0.2.51
-      - 192.0.2.99
-    # Gateway (only needed when public_network is disabled)
-    gateway: 192.0.2.1
-    # Subnet in CIDR format 192.168.1.0/24
-    cidr: 192.0.2.0/24
-    # DHCP range for the admin network, automatically provisioned if empty
-    dhcp_range:
-      - 192.0.2.2
-      - 192.0.2.50
-    # Mapping of network configuration for Overcloud Nodes
-    nic_mapping:
-      # Mapping for compute profile (nodes assigned as Compute nodes)
-      compute:
-        # Physical interface type (interface or bond)
-        phys_type: interface
-        # Physical NIC members (Single value allowed for phys_type: interface)
-        members:
-          - eth0
-      # Mapping for controller profile (nodes assigned as Controller nodes)
-      controller:
-        phys_type: interface
-        members:
-          - eth0
-
-  # Tenant network configuration
-  tenant:
-    enabled: true
-    # Subnet in CIDR format 192.168.1.0/24
-    cidr: 11.0.0.0/24
-    # Tenant network MTU
-    mtu: 1500
-    # Tenant network Overlay segmentation ID range:
-    # VNI, VLAN-ID, etc.
-    overlay_id_range: 2,65535
-
-    # Tenant network segmentation type:
-    # vlan, vxlan, gre
-    segmentation_type: vxlan
-    # Mapping of network configuration for Overcloud Nodes
-    nic_mapping:
-      # Mapping for compute profile (nodes assigned as Compute nodes)
-      compute:
-        # Physical interface type (interface/bond)
-        phys_type: interface
-        # VLAN tag to use with this NIC
-        vlan: native
-        # Physical NIC members of this mapping
-        # Single value allowed for phys_type: interface
-        members:
-          # Note logical name like nic1 not valid for fdio deployment yet.
-          - eth1
-      # Mapping for controller profile (nodes assigned as Controller nodes)
-      controller:
-        # Physical interface type (interface/bond)
-        phys_type: interface
-        vlan: native
-        # Note: logicial names like nic1 are not valid for fdio deployment yet.
-        members:
-          - eth1
-
-  # Can contain 1 or more external networks
-  external:
-    - public:
-      enabled: true
-      # Public network MTU
-      mtu: 1500
-      # Network settings for the Installer VM on external network
-      # (note only valid on 'public' external network)
-      installer_vm:
-        # Indicates if this VM will be bridged to an interface, or to a bond
-        nic_type: interface
-        vlan: native
-        # Interfaces to bridge for installer VM (use multiple values for bond)
-        members:
-          - em1
-        # IP to assign to Installer VM on this network
-        ip: 192.168.37.1
-      cidr: 192.168.37.0/24
-      gateway: 192.168.37.1
-      # Range to allocate to floating IPs for the public network with Neutron
-      floating_ip_range:
-        - 192.168.37.200
-        - 192.168.37.220
-      # Usable ip range for the overcloud node IPs (including VIPs)
-      # Last IP will be used for host bridge (i.e. br-public).
-      # If empty entire range is usable.
-      # Cannot overlap with dhcp_range or introspection_range.
-      overcloud_ip_range:
-        - 192.168.37.10
-        - 192.168.37.199
-      # Mapping of network configuration for Overcloud Nodes
-      nic_mapping:
-        # Mapping for compute profile (nodes assigned as Compute nodes)
-        compute:
-          # Physical interface type (interface or bond)
-          phys_type: interface
-          # VLAN tag to use with this NIC
-          vlan: native
-          # Physical NIC members of this mapping
-          # Single value allowed for phys_type: interface
-          members:
-            - eth2
-        # Mapping for controller profile (nodes assigned as Controller nodes)
-        controller:
-          phys_type: interface
-          vlan: native
-          members:
-            - eth2
-      # External network to be created in OpenStack by Services tenant
-      external_overlay:
-        name: Public_internet
-        type: flat
-        gateway: 192.168.37.1
-    # another external network
-    # This is an example and not yet supported
-    - private_cloud:
-      enabled: false
-      mtu: 1500
-      # Network settings for the Installer VM on external network
-      # note only valid on 'public' external network
-      installer_vm:
-        # Indicates if this VM will be bridged to an interface, or to a bond
-        nic_type: interface
-        vlan: 101
-        # Interfaces to bridge for installer VM (use multiple values for bond)
-        members:
-          - em1
-        # IP to assign to Installer VM on this network
-        ip: 192.168.38.1
-      cidr: 192.168.38.0/24
-      gateway: 192.168.38.1
-      # Range to allocate to floating IPs for the public network with Neutron
-      floating_ip_range:
-        - 192.168.38.200
-        - 192.168.38.220
-      # Usable IP range for overcloud nodes (including VIPs)i
-      # usually this is a shared subnet.
-      # Cannot overlap with dhcp_range or introspection_range.
-      overcloud_ip_range:
-        - 192.168.38.10
-        - 192.168.38.199
-      # Mapping of network configuration for Overcloud Nodes
-      nic_mapping:
-        # Mapping for compute profile (nodes assigned as Compute nodes)
-        compute:
-          # Physical interface type (interface or bond)
-          phys_type: interface
-          # VLAN tag to use with this NIC
-          vlan: 101
-          # Physical NIC members of this mappingi
-          # Single value allowed for phys_type: interface
-          # Note: logical names like nic1 are not valid for fdio deployment yet.
-          members:
-            - eth3
-        # Mapping for controller profile (nodes assigned as Controller nodes)
-        controller:
-          phys_type: interface
-          vlan: 101
-          members:
-            - eth3
-      # External network to be created in OpenStack by Services tenant
-      external_overlay:
-        name: private_cloud
-        type: vlan
-        segmentation_id: 101
-        gateway: 192.168.38.1
-
-  # Storage network configuration
-  storage:
-    enabled: true
-    # Subnet in CIDR format
-    cidr: 12.0.0.0/24
-    # Storage network MTU
-    mtu: 1500
-    # Mapping of network configuration for Overcloud Nodes
-    nic_mapping:
-      # Mapping for compute profile (nodes assigned as Compute nodes)
-      compute:
-        # Physical interface type (interface or bond)
-        phys_type: interface
-        # VLAN tag to use with this NIC
-        vlan: native
-        # Physical NIC members of this mapping
-        # Single value allowed for phys_type: interface
-        members:
-          # Note logical names like nic1 not valid for fdio deployment yet.
-          - eth3
-      # Mapping for controller profile (nodes assigned as Controller nodes)
-      controller:
-        phys_type: interface
-        vlan: native
-        members:
-          - eth3
-
-  api:
-    # API network configuration
-    enabled: false
-    # Subnet in CIDR format
-    cidr: fd00:fd00:fd00:4000::/64
-    # VLAN tag to use for Overcloud hosts on this network
-    vlan: 13
-    # Api network MTU
-    mtu: 1500
-    # Mapping of network configuration for Overcloud Nodes
-    nic_mapping:
-      # Mapping for compute profile (nodes assigned as Compute nodes)
-      compute:
-        # Physical interface type (interface or bond)
-        phys_type: interface
-        # VLAN tag to use with this NIC
-        vlan: native
-        # Physical NIC members of this mapping
-        # Single value allowed for phys_type: interface
-        # Note logical names like nic1 not valid for fdio deployment yet.
-        members:
-          - eth4
-      # Mapping for controller profile (nodes assigned as Controller nodes)
-      controller:
-        phys_type: interface
-        vlan: native
-        members:
-          - eth4
-
-# Apex specific settings
-apex:
-  networks:
-    admin:
-      # Range used for introspection phase (examining nodes).
-      # This cannot overlap with dhcp_range or overcloud_ip_range.
-      # for the overcloud default external network
-      introspection_range:
-        - 192.0.2.100
-        - 192.0.2.120