diff options
author | 2017-02-18 14:47:08 +0000 | |
---|---|---|
committer | 2017-02-18 14:47:08 +0000 | |
commit | da0d8e06bb9a55fb9b15b34cabb19c681667d383 (patch) | |
tree | ff9e2ff0b8f9d62111d33d2b7fec7bd22775b466 /config/network/network_settings_vpp.yaml | |
parent | 645949cbac2bb766d18dfd9f818b6c14545a35e2 (diff) | |
parent | c7e6d15b4d2570c7f9d2bc8dcfc57d8a68fede71 (diff) |
Merge "Add support for odl-fdio scenario"
Diffstat (limited to 'config/network/network_settings_vpp.yaml')
-rw-r--r-- | config/network/network_settings_vpp.yaml | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml new file mode 100644 index 00000000..4b50745f --- /dev/null +++ b/config/network/network_settings_vpp.yaml @@ -0,0 +1,221 @@ +# This configuration file defines Network Environment for a +# Baremetal Deployment of OPNFV. It contains default values +# for 5 following networks: +# +# - admin +# - tenant* +# - external* +# - storage* +# - api* +# *) optional networks +# +# Optional networks will be consolidated with the admin network +# if not explicitly configured. +# +# See short description of the networks in the comments below. +# +# "admin" is the short name for Control Plane Network. +# This network should be IPv4 even it is an IPv6 deployment +# IPv6 does not have PXE boot support. +# During OPNFV deployment it is used for node provisioning which will require +# PXE booting as well as running a DHCP server on this network. Be sure to +# disable any other DHCP/TFTP server on this network. +# +# "tenant" is the network used for tenant traffic. +# +# "external" is the network which should have internet or external +# connectivity. External OpenStack networks will be configured to egress this +# network. There can be multiple external networks, but only one assigned as +# "public" which OpenStack public API's will register. +# +# "storage" is the network for storage I/O. +# +# "api" is an optional network for splitting out OpenStack service API +# communication. This should be used for IPv6 deployments. + + +#Meta data for the network configuration +network-config-metadata: + title: LF-POD-1 Network config + version: 0.1 + created: Mon Dec 28 2015 + comment: None + +# DNS Settings +dns-domain: opnfvlf.org +dns-search: opnfvlf.org +dns_nameservers: + - 8.8.8.8 + - 8.8.4.4 +# NTP servers +ntp: + - 0.se.pool.ntp.org + - 1.se.pool.ntp.org +# Syslog server +syslog: + server: 10.128.1.24 + transport: 'tcp' + +# Common network settings +networks: # Network configurations + admin: # Admin configuration (pxe and jumpstart), + enabled: true + installer_vm: # Network settings for the Installer VM on admin network + nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + members: + - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) + vlan: native # VLAN tag to use for this network on Installer VM, native means none + ip: 192.0.2.1 # IP to assign to Installer VM on this network + overcloud_ip_range: + - 192.0.2.11 + - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be + # used for host bridge (i.e. br-admin). If empty entire range is usable. + # Cannot overlap with dhcp_range or introspection_range. + gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) + cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 + dhcp_range: + - 192.0.2.2 + - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth0 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + members: + - eth0 + # + tenant: # Tenant network configuration + enabled: true + cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 + mtu: 1500 # Tenant network MTU + overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: + # VNI, VLAN-ID, etc. + segmentation_type: vxlan # Tenant network segmentation type: + # vlan, vxlan, gre + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: vpp_interface # Physical interface type (interface/vpp_interface) + uio_driver: uio_pci_generic # uio driver, for vpp interfaces only + vlan: native # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: vpp_interface # Physical interface type (interface/vpp_interface) + uio_driver: uio_pci_generic # uio driver, for vpp interfaces only + vlan: native + members: + - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. + # + external: # Can contain 1 or more external networks + - public: # "public" network will be the network the installer VM attaches to + enabled: true + mtu: 1500 # Public network MTU + installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) + nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + vlan: native + members: + - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) + ip: 192.168.37.1 # IP to assign to Installer VM on this network + cidr: 192.168.37.0/24 + gateway: 192.168.37.1 + floating_ip_range: + - 192.168.37.200 + - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron + overcloud_ip_range: + - 192.168.37.10 + - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host + # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: native # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth2 + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: native + members: + - eth2 + external_overlay: # External network to be created in OpenStack by Services tenant + name: Public_internet + type: flat + gateway: 192.168.37.1 + - private_cloud: # another external network + enabled: false + mtu: 1500 + installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) + nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond + vlan: 101 + members: + - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) + ip: 192.168.38.1 # IP to assign to Installer VM on this network + cidr: 192.168.38.0/24 + gateway: 192.168.38.1 + floating_ip_range: + - 192.168.38.200 + - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron + overcloud_ip_range: + - 192.168.38.10 + - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet. + # Cannot overlap with dhcp_range or introspection_range. + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: 101 # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: 101 + members: + - eth3 + external_overlay: # External network to be created in OpenStack by Services tenant + name: private_cloud + type: vlan + segmentation_id: 101 + gateway: 192.168.38.1 + # + storage: # Storage network configuration + enabled: true + cidr: 12.0.0.0/24 # Subnet in CIDR format + mtu: 1500 # Storage network MTU + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: native # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: native + members: + - eth3 + # + api: # API network configuration + enabled: false + cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format + vlan: 13 # VLAN tag to use for Overcloud hosts on this network + mtu: 1500 # Api network MTU + nic_mapping: # Mapping of network configuration for Overcloud Nodes + compute: # Mapping for compute profile (nodes that will be used as Compute nodes) + phys_type: interface # Physical interface type (interface or bond) + vlan: native # VLAN tag to use with this NIC + members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) + - eth4 # Note that logic nic name like nic1 cannot be used for fdio deployment yet. + controller: # Mapping for controller profile (nodes that will be used as Controller nodes) + phys_type: interface + vlan: native + members: + - eth4 + +# Apex specific settings +apex: + networks: + admin: + introspection_range: + - 192.0.2.100 + - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range. + # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range + # for the overcloud default external network |