Merge "Adds NSDriver to Neutron agent drivers" into stable/colorado

2 files changed, 553 insertions, 0 deletions

diff --git a/build/interface.py b/build/interface.py
new file mode 100644
index 00000000..709fd677
--- /dev/null
+++ b/build/interface.py
@@ -0,0 +1,552 @@
+# Copyright 2012 OpenStack Foundation
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+import abc
+import eventlet
+import netaddr
+from oslo_config import cfg
+from oslo_log import log as logging
+import six
+
+from neutron._i18n import _, _LE, _LI, _LW
+from neutron.agent.common import ovs_lib
+from neutron.agent.linux import ip_lib
+from neutron.agent.linux import utils
+from neutron.common import constants as n_const
+from neutron.common import exceptions
+from neutron.common import ipv6_utils
+
+
+LOG = logging.getLogger(__name__)
+
+OPTS = [
+    cfg.StrOpt('ovs_integration_bridge',
+               default='br-int',
+               help=_('Name of Open vSwitch bridge to use')),
+    cfg.BoolOpt('ovs_use_veth',
+                default=False,
+                help=_('Uses veth for an OVS interface or not. '
+                       'Support kernels with limited namespace support '
+                       '(e.g. RHEL 6.5) so long as ovs_use_veth is set to '
+                       'True.')),
+    cfg.IntOpt('network_device_mtu',
+               deprecated_for_removal=True,
+               help=_('MTU setting for device. This option will be removed in '
+                      'Newton. Please use the system-wide segment_mtu setting '
+                      'which the agents will take into account when wiring '
+                      'VIFs.')),
+]
+
+
+@six.add_metaclass(abc.ABCMeta)
+class LinuxInterfaceDriver(object):
+
+    # from linux IF_NAMESIZE
+    DEV_NAME_LEN = 14
+    DEV_NAME_PREFIX = n_const.TAP_DEVICE_PREFIX
+
+    def __init__(self, conf):
+        self.conf = conf
+        if self.conf.network_device_mtu:
+            self._validate_network_device_mtu()
+
+    def _validate_network_device_mtu(self):
+        if (ipv6_utils.is_enabled() and
+            self.conf.network_device_mtu < n_const.IPV6_MIN_MTU):
+            LOG.error(_LE("IPv6 protocol requires a minimum MTU of "
+                          "%(min_mtu)s, while the configured value is "
+                          "%(current_mtu)s"), {'min_mtu': n_const.IPV6_MIN_MTU,
+                          'current_mtu': self.conf.network_device_mtu})
+            raise SystemExit(1)
+
+    @property
+    def use_gateway_ips(self):
+        """Whether to use gateway IPs instead of unique IP allocations.
+
+        In each place where the DHCP agent runs, and for each subnet for
+        which DHCP is handling out IP addresses, the DHCP port needs -
+        at the Linux level - to have an IP address within that subnet.
+        Generally this needs to be a unique Neutron-allocated IP
+        address, because the subnet's underlying L2 domain is bridged
+        across multiple compute hosts and network nodes, and for HA
+        there may be multiple DHCP agents running on that same bridged
+        L2 domain.
+
+        However, if the DHCP ports - on multiple compute/network nodes
+        but for the same network - are _not_ bridged to each other,
+        they do not need each to have a unique IP address.  Instead
+        they can all share the same address from the relevant subnet.
+        This works, without creating any ambiguity, because those
+        ports are not all present on the same L2 domain, and because
+        no data within the network is ever sent to that address.
+        (DHCP requests are broadcast, and it is the network's job to
+        ensure that such a broadcast will reach at least one of the
+        available DHCP servers.  DHCP responses will be sent _from_
+        the DHCP port address.)
+
+        Specifically, for networking backends where it makes sense,
+        the DHCP agent allows all DHCP ports to use the subnet's
+        gateway IP address, and thereby to completely avoid any unique
+        IP address allocation.  This behaviour is selected by running
+        the DHCP agent with a configured interface driver whose
+        'use_gateway_ips' property is True.
+
+        When an operator deploys Neutron with an interface driver that
+        makes use_gateway_ips True, they should also ensure that a
+        gateway IP address is defined for each DHCP-enabled subnet,
+        and that the gateway IP address doesn't change during the
+        subnet's lifetime.
+        """
+        return False
+
+    def init_l3(self, device_name, ip_cidrs, namespace=None,
+                preserve_ips=None, clean_connections=False):
+        """Set the L3 settings for the interface using data from the port.
+
+        ip_cidrs: list of 'X.X.X.X/YY' strings
+        preserve_ips: list of ip cidrs that should not be removed from device
+        clean_connections: Boolean to indicate if we should cleanup connections
+          associated to removed ips
+        """
+        preserve_ips = preserve_ips or []
+        device = ip_lib.IPDevice(device_name, namespace=namespace)
+
+        # The LLA generated by the operating system is not known to
+        # Neutron, so it would be deleted if we added it to the 'previous'
+        # list here
+        default_ipv6_lla = ip_lib.get_ipv6_lladdr(device.link.address)
+        previous = {addr['cidr'] for addr in device.addr.list(
+            filters=['permanent'])} - {default_ipv6_lla}
+
+        # add new addresses
+        for ip_cidr in ip_cidrs:
+
+            net = netaddr.IPNetwork(ip_cidr)
+            # Convert to compact IPv6 address because the return values of
+            # "ip addr list" are compact.
+            if net.version == 6:
+                ip_cidr = str(net)
+            if ip_cidr in previous:
+                previous.remove(ip_cidr)
+                continue
+
+            device.addr.add(ip_cidr)
+
+        # clean up any old addresses
+        for ip_cidr in previous:
+            if ip_cidr not in preserve_ips:
+                if clean_connections:
+                    device.delete_addr_and_conntrack_state(ip_cidr)
+                else:
+                    device.addr.delete(ip_cidr)
+
+    def init_router_port(self,
+                         device_name,
+                         ip_cidrs,
+                         namespace,
+                         preserve_ips=None,
+                         extra_subnets=None,
+                         clean_connections=False):
+        """Set the L3 settings for a router interface using data from the port.
+
+        ip_cidrs: list of 'X.X.X.X/YY' strings
+        preserve_ips: list of ip cidrs that should not be removed from device
+        clean_connections: Boolean to indicate if we should cleanup connections
+          associated to removed ips
+        extra_subnets: An iterable of cidrs to add as routes without address
+        """
+        LOG.debug("init_router_port: device_name(%s), namespace(%s)",
+                  device_name, namespace)
+        self.init_l3(device_name=device_name,
+                     ip_cidrs=ip_cidrs,
+                     namespace=namespace,
+                     preserve_ips=preserve_ips or [],
+                     clean_connections=clean_connections)
+
+        device = ip_lib.IPDevice(device_name, namespace=namespace)
+
+        # Manage on-link routes (routes without an associated address)
+        new_onlink_cidrs = set(s['cidr'] for s in extra_subnets or [])
+
+        v4_onlink = device.route.list_onlink_routes(n_const.IP_VERSION_4)
+        v6_onlink = device.route.list_onlink_routes(n_const.IP_VERSION_6)
+        existing_onlink_cidrs = set(r['cidr'] for r in v4_onlink + v6_onlink)
+
+        for route in new_onlink_cidrs - existing_onlink_cidrs:
+            LOG.debug("adding onlink route(%s)", route)
+            device.route.add_onlink_route(route)
+        for route in (existing_onlink_cidrs - new_onlink_cidrs -
+                      set(preserve_ips or [])):
+            LOG.debug("deleting onlink route(%s)", route)
+            device.route.delete_onlink_route(route)
+
+    def add_ipv6_addr(self, device_name, v6addr, namespace, scope='global'):
+        device = ip_lib.IPDevice(device_name,
+                                 namespace=namespace)
+        net = netaddr.IPNetwork(v6addr)
+        device.addr.add(str(net), scope)
+
+    def delete_ipv6_addr(self, device_name, v6addr, namespace):
+        device = ip_lib.IPDevice(device_name,
+                                 namespace=namespace)
+        device.delete_addr_and_conntrack_state(v6addr)
+
+    def delete_ipv6_addr_with_prefix(self, device_name, prefix, namespace):
+        """Delete the first listed IPv6 address that falls within a given
+        prefix.
+        """
+        device = ip_lib.IPDevice(device_name, namespace=namespace)
+        net = netaddr.IPNetwork(prefix)
+        for address in device.addr.list(scope='global', filters=['permanent']):
+            ip_address = netaddr.IPNetwork(address['cidr'])
+            if ip_address in net:
+                device.delete_addr_and_conntrack_state(address['cidr'])
+                break
+
+    def get_ipv6_llas(self, device_name, namespace):
+        device = ip_lib.IPDevice(device_name,
+                                 namespace=namespace)
+
+        return device.addr.list(scope='link', ip_version=6)
+
+    def check_bridge_exists(self, bridge):
+        if not ip_lib.device_exists(bridge):
+            raise exceptions.BridgeDoesNotExist(bridge=bridge)
+
+    def get_device_name(self, port):
+        return (self.DEV_NAME_PREFIX + port.id)[:self.DEV_NAME_LEN]
+
+    @staticmethod
+    def configure_ipv6_ra(namespace, dev_name):
+        """Configure acceptance of IPv6 route advertisements on an intf."""
+        # Learn the default router's IP address via RAs
+        ip_lib.IPWrapper(namespace=namespace).netns.execute(
+            ['sysctl', '-w', 'net.ipv6.conf.%s.accept_ra=2' % dev_name])
+
+    @abc.abstractmethod
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+        """Plug in the interface only for new devices that don't exist yet."""
+
+    def plug(self, network_id, port_id, device_name, mac_address,
+             bridge=None, namespace=None, prefix=None, mtu=None):
+        if not ip_lib.device_exists(device_name,
+                                    namespace=namespace):
+            try:
+                self.plug_new(network_id, port_id, device_name, mac_address,
+                              bridge, namespace, prefix, mtu)
+            except TypeError:
+                self.plug_new(network_id, port_id, device_name, mac_address,
+                              bridge, namespace, prefix)
+        else:
+            LOG.info(_LI("Device %s already exists"), device_name)
+
+    @abc.abstractmethod
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        """Unplug the interface."""
+
+    @property
+    def bridged(self):
+        """Whether the DHCP port is bridged to the VM TAP interfaces.
+
+        When the DHCP port is bridged to the TAP interfaces for the
+        VMs for which it is providing DHCP service - as is the case
+        for most Neutron network implementations - the DHCP server
+        only needs to listen on the DHCP port, and will still receive
+        DHCP requests from all the relevant VMs.
+
+        If the DHCP port is not bridged to the relevant VM TAP
+        interfaces, the DHCP server needs to listen explicitly on
+        those TAP interfaces, and to treat those as aliases of the
+        DHCP port where the IP subnet is defined.
+        """
+        return True
+
+
+class NullDriver(LinuxInterfaceDriver):
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+        pass
+
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        pass
+
+class NSDriver(LinuxInterfaceDriver):
+    """Device independent driver enabling creation of a non device specific
+    interface in network spaces.  Attachment to the device is not performed.
+    """
+    MAX_TIME_FOR_DEVICE_EXISTENCE = 30
+
+    @classmethod
+    def _device_is_created_in_time(cls, device_name):
+        """See if device is created, within time limit."""
+        attempt = 0
+        while attempt < NSDriver.MAX_TIME_FOR_DEVICE_EXISTENCE:
+            if ip_lib.device_exists(device_name):
+                return True
+            attempt += 1
+            eventlet.sleep(1)
+        LOG.error(_LE("Device %(dev)s was not created in %(time)d seconds"),
+                  {'dev': device_name,
+                   'time': NSDriver.MAX_TIME_FOR_DEVICE_EXISTENCE})
+        return False
+
+    def _configure_mtu(self, ns_dev, mtu=None):
+        # Need to set MTU, after added to namespace. See review
+        # https://review.openstack.org/327651
+        try:
+            # Note: network_device_mtu will be deprecated in future
+            mtu_override = self.conf.network_device_mtu
+        except cfg.NoSuchOptError:
+            LOG.warning(_LW("Config setting for MTU deprecated - any "
+                            "override will be ignored."))
+            mtu_override = None
+        if mtu_override:
+            mtu = mtu_override
+            LOG.debug("Overriding MTU to %d", mtu)
+        if mtu:
+            ns_dev.link.set_mtu(mtu)
+        else:
+            LOG.debug("No MTU provided - skipping setting value")
+
+    def plug(self, network_id, port_id, device_name, mac_address,
+             bridge=None, namespace=None, prefix=None, mtu=None):
+
+        # Overriding this, we still want to add an existing device into the
+        # namespace.
+        self.plug_new(network_id, port_id, device_name, mac_address,
+                      bridge, namespace, prefix, mtu)
+
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+
+        ip = ip_lib.IPWrapper()
+        ns_dev = ip.device(device_name)
+
+        LOG.debug("Plugging dev: '%s' into namespace: '%s' ",
+                  device_name, namespace)
+
+        # Wait for device creation
+        if not self._device_is_created_in_time(device_name):
+            return
+
+        ns_dev.link.set_address(mac_address)
+
+        if namespace:
+            namespace_obj = ip.ensure_namespace(namespace)
+            namespace_obj.add_device_to_namespace(ns_dev)
+
+        self._configure_mtu(ns_dev, mtu)
+
+        ns_dev.link.set_up()
+
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        # Device removal is done externally. Just remove the namespace
+        LOG.debug("Removing namespace: '%s'", namespace)
+        ip_lib.IPWrapper(namespace).garbage_collect_namespace()
+
+
+class OVSInterfaceDriver(LinuxInterfaceDriver):
+    """Driver for creating an internal interface on an OVS bridge."""
+
+    DEV_NAME_PREFIX = n_const.TAP_DEVICE_PREFIX
+
+    def __init__(self, conf):
+        super(OVSInterfaceDriver, self).__init__(conf)
+        if self.conf.ovs_use_veth:
+            self.DEV_NAME_PREFIX = 'ns-'
+
+    def _get_tap_name(self, dev_name, prefix=None):
+        if self.conf.ovs_use_veth:
+            dev_name = dev_name.replace(prefix or self.DEV_NAME_PREFIX,
+                                        n_const.TAP_DEVICE_PREFIX)
+        return dev_name
+
+    def _ovs_add_port(self, bridge, device_name, port_id, mac_address,
+                      internal=True):
+        attrs = [('external_ids', {'iface-id': port_id,
+                                   'iface-status': 'active',
+                                   'attached-mac': mac_address})]
+        if internal:
+            attrs.insert(0, ('type', 'internal'))
+
+        ovs = ovs_lib.OVSBridge(bridge)
+        ovs.replace_port(device_name, *attrs)
+
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+        """Plug in the interface."""
+        if not bridge:
+            bridge = self.conf.ovs_integration_bridge
+
+        self.check_bridge_exists(bridge)
+
+        ip = ip_lib.IPWrapper()
+        tap_name = self._get_tap_name(device_name, prefix)
+
+        if self.conf.ovs_use_veth:
+            # Create ns_dev in a namespace if one is configured.
+            root_dev, ns_dev = ip.add_veth(tap_name,
+                                           device_name,
+                                           namespace2=namespace)
+            root_dev.disable_ipv6()
+        else:
+            ns_dev = ip.device(device_name)
+
+        internal = not self.conf.ovs_use_veth
+        self._ovs_add_port(bridge, tap_name, port_id, mac_address,
+                           internal=internal)
+
+        ns_dev.link.set_address(mac_address)
+
+        # Add an interface created by ovs to the namespace.
+        if not self.conf.ovs_use_veth and namespace:
+            namespace_obj = ip.ensure_namespace(namespace)
+            namespace_obj.add_device_to_namespace(ns_dev)
+
+        # NOTE(ihrachys): the order here is significant: we must set MTU after
+        # the device is moved into a namespace, otherwise OVS bridge does not
+        # allow to set MTU that is higher than the least of all device MTUs on
+        # the bridge
+        mtu = self.conf.network_device_mtu or mtu
+        if mtu:
+            ns_dev.link.set_mtu(mtu)
+            if self.conf.ovs_use_veth:
+                root_dev.link.set_mtu(mtu)
+        else:
+            LOG.warning(_LW("No MTU configured for port %s"), port_id)
+
+        ns_dev.link.set_up()
+        if self.conf.ovs_use_veth:
+            root_dev.link.set_up()
+
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        """Unplug the interface."""
+        if not bridge:
+            bridge = self.conf.ovs_integration_bridge
+
+        tap_name = self._get_tap_name(device_name, prefix)
+        self.check_bridge_exists(bridge)
+        ovs = ovs_lib.OVSBridge(bridge)
+
+        try:
+            ovs.delete_port(tap_name)
+            if self.conf.ovs_use_veth:
+                device = ip_lib.IPDevice(device_name, namespace=namespace)
+                device.link.delete()
+                LOG.debug("Unplugged interface '%s'", device_name)
+        except RuntimeError:
+            LOG.error(_LE("Failed unplugging interface '%s'"),
+                      device_name)
+
+
+class IVSInterfaceDriver(LinuxInterfaceDriver):
+    """Driver for creating an internal interface on an IVS bridge."""
+
+    DEV_NAME_PREFIX = n_const.TAP_DEVICE_PREFIX
+
+    def __init__(self, conf):
+        super(IVSInterfaceDriver, self).__init__(conf)
+        self.DEV_NAME_PREFIX = 'ns-'
+
+    def _get_tap_name(self, dev_name, prefix=None):
+        dev_name = dev_name.replace(prefix or self.DEV_NAME_PREFIX,
+                                    n_const.TAP_DEVICE_PREFIX)
+        return dev_name
+
+    def _ivs_add_port(self, device_name, port_id, mac_address):
+        cmd = ['ivs-ctl', 'add-port', device_name]
+        utils.execute(cmd, run_as_root=True)
+
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+        """Plug in the interface."""
+        ip = ip_lib.IPWrapper()
+        tap_name = self._get_tap_name(device_name, prefix)
+
+        root_dev, ns_dev = ip.add_veth(tap_name, device_name)
+        root_dev.disable_ipv6()
+
+        self._ivs_add_port(tap_name, port_id, mac_address)
+
+        ns_dev = ip.device(device_name)
+        ns_dev.link.set_address(mac_address)
+
+        mtu = self.conf.network_device_mtu or mtu
+        if mtu:
+            ns_dev.link.set_mtu(mtu)
+            root_dev.link.set_mtu(mtu)
+        else:
+            LOG.warning(_LW("No MTU configured for port %s"), port_id)
+
+        if namespace:
+            namespace_obj = ip.ensure_namespace(namespace)
+            namespace_obj.add_device_to_namespace(ns_dev)
+
+        ns_dev.link.set_up()
+        root_dev.link.set_up()
+
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        """Unplug the interface."""
+        tap_name = self._get_tap_name(device_name, prefix)
+        try:
+            cmd = ['ivs-ctl', 'del-port', tap_name]
+            utils.execute(cmd, run_as_root=True)
+            device = ip_lib.IPDevice(device_name, namespace=namespace)
+            device.link.delete()
+            LOG.debug("Unplugged interface '%s'", device_name)
+        except RuntimeError:
+            LOG.error(_LE("Failed unplugging interface '%s'"),
+                      device_name)
+
+
+class BridgeInterfaceDriver(LinuxInterfaceDriver):
+    """Driver for creating bridge interfaces."""
+
+    DEV_NAME_PREFIX = 'ns-'
+
+    def plug_new(self, network_id, port_id, device_name, mac_address,
+                 bridge=None, namespace=None, prefix=None, mtu=None):
+        """Plugin the interface."""
+        ip = ip_lib.IPWrapper()
+
+        # Enable agent to define the prefix
+        tap_name = device_name.replace(prefix or self.DEV_NAME_PREFIX,
+                                       n_const.TAP_DEVICE_PREFIX)
+        # Create ns_veth in a namespace if one is configured.
+        root_veth, ns_veth = ip.add_veth(tap_name, device_name,
+                                         namespace2=namespace)
+        root_veth.disable_ipv6()
+        ns_veth.link.set_address(mac_address)
+
+        mtu = self.conf.network_device_mtu or mtu
+        if mtu:
+            root_veth.link.set_mtu(mtu)
+            ns_veth.link.set_mtu(mtu)
+        else:
+            LOG.warning(_LW("No MTU configured for port %s"), port_id)
+
+        root_veth.link.set_up()
+        ns_veth.link.set_up()
+
+    def unplug(self, device_name, bridge=None, namespace=None, prefix=None):
+        """Unplug the interface."""
+        device = ip_lib.IPDevice(device_name, namespace=namespace)
+        try:
+            device.link.delete()
+            LOG.debug("Unplugged interface '%s'", device_name)
+        except RuntimeError:
+            LOG.error(_LE("Failed unplugging interface '%s'"),
+                      device_name)
diff --git a/build/overcloud-full.sh b/build/overcloud-full.sh
index 0984a923..5166bff1 100755
--- a/build/overcloud-full.sh
+++ b/build/overcloud-full.sh
@@ -144,6 +144,7 @@ LIBGUESTFS_BACKEND=direct virt-customize \
     --run-command "cd /etc/puppet/modules/ && tar xzf puppet-tacker.tar.gz" \
     --run-command "yum install -y https://dl.dropboxusercontent.com/u/7079970/rabbitmq-server-3.6.3-5.el7ost.noarch.rpm" \
     --run-command "pip install python-senlinclient" \
+    --upload ../interface.py:/usr/lib/python2.7/site-packages/neutron/agent/linux/ \
     -a overcloud-full_build.qcow2
 
 mv -f overcloud-full_build.qcow2 overcloud-full.qcow2