blob: 210b6b0353adb7d9f2b2d024c5e16a3bf287627a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
#This file is an example of an environment file for defining the isolated
#networks and related parameters.
resource_registry:
# Network Interface templates to use (these files must exist)
OS::TripleO::BlockStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/cinder-storage.yaml
OS::TripleO::Compute::Net::SoftwareConfig:
../network/config/single-nic-vlans/compute.yaml
OS::TripleO::Controller::Net::SoftwareConfig:
../network/config/single-nic-vlans/controller.yaml
OS::TripleO::ObjectStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/swift-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/ceph-storage.yaml
parameter_defaults:
# This section is where deployment-specific configuration is done
# CIDR subnet mask length for provisioning network
ControlPlaneSubnetCidr: '24'
# Gateway router for the provisioning network (or Undercloud IP)
ControlPlaneDefaultRoute: 192.0.2.254
EC2MetadataIp: 192.0.2.1 # Generally the IP of the Undercloud
# Customize the IP subnets to match the local environment
InternalApiNetCidr: 172.17.0.0/24
StorageNetCidr: 172.18.0.0/24
StorageMgmtNetCidr: 172.19.0.0/24
TenantNetCidr: 172.16.0.0/24
ExternalNetCidr: 10.0.0.0/24
# Customize the VLAN IDs to match the local environment
InternalApiNetworkVlanID: 20
StorageNetworkVlanID: 30
StorageMgmtNetworkVlanID: 40
TenantNetworkVlanID: 50
ExternalNetworkVlanID: 10
# Customize the IP ranges on each network to use for static IPs and VIPs
InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}]
StorageAllocationPools: [{'start': '172.18.0.10', 'end': '172.18.0.200'}]
StorageMgmtAllocationPools: [{'start': '172.19.0.10', 'end': '172.19.0.200'}]
TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}]
# Leave room if the external network is also used for floating IPs
ExternalAllocationPools: [{'start': '10.0.0.10', 'end': '10.0.0.50'}]
# Gateway router for the external network
ExternalInterfaceDefaultRoute: 10.0.0.1
# Uncomment if using the Management Network (see network-management.yaml)
# ManagementNetCidr: 10.0.1.0/24
# ManagementAllocationPools: [{'start': '10.0.1.10', 'end': '10.0.1.50'}]
# Use either this parameter or ControlPlaneDefaultRoute in the NIC templates
# ManagementInterfaceDefaultRoute: 10.0.1.1
# Define the DNS servers (maximum 2) for the overcloud nodes
DnsServers: ["8.8.8.8","8.8.4.4"]
# List of Neutron network types for tenant networks (will be used in order)
NeutronNetworkType: 'vxlan,vlan'
# The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling.
NeutronTunnelTypes: 'vxlan'
# Neutron VLAN ranges per network, for example 'datacentre:1:499,tenant:500:1000':
NeutronNetworkVLANRanges: 'datacentre:1:1000'
# Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100"
# for Linux bonds w/LACP, or "bond_mode=active-backup" for OVS active/backup.
BondInterfaceOvsOptions: "bond_mode=active-backup"
|
