summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2017-09-25Merge "Rename service_workflow_tasks into workflow_tasks" into stable/pikeJenkins1-1/+1
2017-09-20Adds post_upgrade_tasks for any service post-upgrade ansible tasksmarios1-2/+3
This adds a new config/deployment per role that will come after any post deploy steps. It drives the same ansible config as the upgrade_tasks but instead collects the post_upgrade_tasks for any service in the given role. The workflow is upgrade_tasks, then post deploy steps (either puppet/ or docker/ depending on the env) and then the post_upgrade_tasks added here. This is added to the pacemaker/cinder-volume.yaml service for now see the bug below for more info Change-Id: Iced34fecf02ebddc91df9302de54d2f4c2cab680 Closes-Bug: 1706951 (cherry picked from commit 2e182bffeeb099cb5e0b1747086fb0e0f57b7b5d)
2017-09-14Rename service_workflow_tasks into workflow_tasksGiulio Fidente1-1/+1
Using the service_ prefix seems incoherent with its use in service_config_settings (vs config_settings). Change-Id: Ia39f181415bee0071409dabddfa0c5c312915e1f (cherry picked from commit 09137304b98a02ed024c0288da907cfe35ca5fe1)
2017-09-02Separate config_volume for ringbuilderJames Slagle1-1/+1
Use a separate config_volume for swift_ringbuilder puppet_config tasks. This is necessary so that the swift_ringbuilder and swift-storage services don't both rsync files to the same bind mounted directory. The rsync command from docker-puppet.py uses --delete-after, so when they both use the same config_volume, they can end up deleting the files generated by the other (depending on the order of execution). Even though a separate config_volume is used, the rings must still end up in /etc/swift for the swift services containers. An additional container init task is used to copy the ring files into /var/lib/config-data/puppet-generated/swift/etc/swift so that they will be present when the actual swift services containers are started. Change-Id: I05821e76191f64212704ca8e3b7428cda6b3a4b7 Closes-Bug: #1710952 (cherry picked from commit cba00abb7517efa6a8d9b8fb954563204323ffed)
2017-08-03Merge "Make UpgradeLevelNovaCompute parameters consistent"Jenkins1-1/+0
2017-08-03Merge "Make many networking parameters consistent"Jenkins1-32/+8
2017-08-03Merge "Render isolated network templates using jinja2"Jenkins1-2/+39
2017-08-02Make UpgradeLevelNovaCompute parameters consistentBen Nemec1-1/+0
There is logic in nova-base.yaml that depends on the default for this parameter being '', and the nova-compute service only needs it set to auto during upgrade. That will be done by [1] anyway, so it doesn't matter what the default is. It's also not clear to me that the nova-compute task is even needed now that we're post-Ocata, but that's not a change I feel comfortable making. 1: https://github.com/openstack/tripleo-heat-templates/blob/master/environments/major-upgrade-composable-steps.yaml Change-Id: Iccfcb5b68e406db1b942375803cfedbb929b4307 Partial-Bug: 1700664
2017-08-02Make many networking parameters consistentBen Nemec1-32/+8
These are mostly the low hanging fruit that only required a few minor changes to fix. There are more that require a lot of changes or might be more controversial that will be done later. Change-Id: I55cebc92ef37a3bb167f5fae0debe77339395e62 Partial-Bug: 1700664
2017-08-02Make RoleParameters and key_name descriptions consistentBen Nemec1-2/+1
The key_name default is ignored because the parameter is used in some mutually exclusive environments where the default doesn't need to be the same. Change-Id: I77c1a1159fae38d03b0e59b80ae6bee491d734d7 Partial-Bug: 1700664
2017-07-27Generate MySQL client config if service requires databaseDamien Ciabrini1-15/+79
Services that access database have to read an extra MySQL configuration file /etc/my.cnf.d/tripleo.cnf which holds client-only settings, like client bind address and SSL configuration. The configuration file is thus used by containerized services, but also by non-containerized services that still run on the host. In order to generate that client configuration file appropriately both on the host and for containers, 1) the MySQLClient service must be included by the role; 2) every containerized service which uses the database must include the mysql::client profile in the docker-puppet config generation step. By including the mysql::client profile in each containerized service, we ensure that any change in configuration file will be reflected in the service's /var/lib/config-data/{service}, and that paunch will restart the service's container automatically. We now only rely on MySQLClient from puppet/services, to make it possible to generate /etc/my.cnf.d/tripleo.cnf on the host, and to set the hiera keys that drive the generation of that config file in containers via docker-puppet. We include a new YAML validation step to ensure that any service which depends on MySQL will initialize the mysql::client profile during the docker-puppet step. Change-Id: I0dab1dc9caef1e749f1c42cfefeba179caebc8d7
2017-07-27Merge "Deploy Ceph in containers using ceph-ansible via external workflow"Jenkins1-0/+3
2017-07-26Deploy Ceph in containers using ceph-ansible via external workflowGiulio Fidente1-0/+3
Add docker profiles to deploy Ceph in containers via ceph-ansible. This is implemented by triggering a Mistral workflow during one of the overcloud deployment steps, as provided by [1]. Some new service-specific parameters are available to determine the workflow to execute and the ansible playbook to use. A new `CephAnsibleExtraConfig` parameter can be used to provide arbitrary config variables consumed by `ceph-ansible`. The pre-existing template params consumed up until the Pike release to drive `puppet-ceph` continue to work and are translated, when possible, into the equivalent `ceph-ansible` variable. A new environment file is added to enable use of ceph-ansible; the pre-existing puppet-ceph implementation remains unchanged and usable for non-containerized deployments. 1. https://review.openstack.org/#/c/463324/ Change-Id: I81d44a1e198c83a4ef8b109b4eb6c611555dcdc5
2017-07-26Render isolated network templates using jinja2Dan Sneddon1-2/+39
This change adds templates that are used to create network and port definition templates for each network that is defined in network_data.yaml. In order to render the templates, additional fields have been added to the network_data.yaml file. If this optional data is present, it will be used to populate the default parameter values in the network template. The only required parameters in the network_data.yaml file is the network name. If the network will have IPv6 addresses, then ipv6: true must be set on the network. The existing networks have been modeled in the network_data.yaml, but until these templates are removed from the j2_excludes.yaml file they will not be generated on the fly. Any additional networks will have templates generated. This change also removes an unnecessary conditional from the networks.j2.yaml file, since InternalApiNetwork doesn't need to be reformatted as InternalNetwork (it's only used in this one file). A follow-up patch will remove the existing network definitions so all networks are created dynamically. Change-Id: If074f87494a46305c990a0ea332c7b576d3c6ed8 Depends-On: Iab8aca2f1fcaba0c8f109717a4b3068f629c9aab Partially-Implements: blueprint composable-networks
2017-07-26Merge "Make various password descriptions consistent"Jenkins1-5/+0
2017-07-24Merge "Support configurable Zaqar backends"Jenkins1-3/+5
2017-07-24Support configurable Zaqar backendsDan Prince1-3/+5
This patch adds parameters to configure alternative version of the Zaqar messaging and management backends. The intent is to make use of these settings in the containers undercloud to use swift/mysql backends as a default thus avoiding the dependency on MongoDB. Change-Id: Ifd6a561737184c9322192ffc9a412c77d6eac3e9 Depends-On: Ie6a56b9163950cee2c0341afa0c0ddce665f3704 Depends-On: I3598e39c0a3cdf80b96e728d9aa8a7e6505e0690
2017-07-21Make various password descriptions consistentBen Nemec1-5/+0
Since these are obviously global parameters they shouldn't specify what will be using them because they are used in multiple places. Change-Id: I5054c2d67dffe802e37f8391dd7bad4721e29831 Partial-Bug: 1700664
2017-07-21Make Deploy/UpdateIdentifier definition semi-consistentBen Nemec1-4/+1
It seems UpdateIdentifier is an overloaded parameter - it is used both to trigger package updates in the minor update case as well as to trigger the upgrade steps during a major upgrade. I'm not sure it's appropriate to change either of the descriptions as a result, so for the moment that is added to the exclusion list. Change-Id: Ied36cf259f6a6e5c8cfa7a01722fb7fda6900976 Partial-Bug: 1700664
2017-07-21Make EnablePackageInstall and Debug descriptions consistentBen Nemec1-2/+0
Change-Id: I3ea7c0c7ea049043668e68c6e637fd2aaf992622 Partial-Bug: 1700664
2017-07-21Add all existing parameter mismatches to exclusion listBen Nemec1-5/+93
This way we have one list of problems that need to be fixed and can enable this check to avoid adding any new ones. As parameters are fixed they can be removed from the exclusion list. Change-Id: Icb5fc36e2da3a3bfb7eaa8a66464c685220e527f
2017-07-18Merge "Add ComputeHCI role and related validations"Jenkins1-3/+22
2017-07-14Adds network/cidr mapping into a new service propertyGiulio Fidente1-1/+1
Makes it possible to resolve network subnets within a service template; the data is transported into a new property ServiceData wired into every service which hopefully is generic enough to be extended in the future and transport more data. Data can be consumed in service templates to set config values which need to know what is the subnet where a deamon operates (for example the Ceph Public vs Cluster network). Change-Id: I28e21c46f1ef609517175f7e7ee19e28d1c0cba2
2017-07-10Merge "Modify generic role template to support custom networks"Jenkins1-2/+4
2017-07-07Add in roles data validationAlex Schultz4-0/+125
With the merging of Iad3e9b215c6f21ba761c8360bb7ed531e34520e6 the roles_data.yaml should be generated with tripleoclient rather than edited. This change adds in a pep8 task to verify that the appropriate role files in roles/ have been modified to match how our default roles_data.yaml is constructed. Additionally this change adds a new tox target called 'genrolesdata' that will all you to automatically generate roles_data.yaml and roles_data_undercloud.yaml Change-Id: I5eb15443a131a122d1a4abf6fc15a3ac3e15941b Related-Blueprint: example-custom-role-environments
2017-07-05Modify generic role template to support custom networksSteven Hardy1-2/+4
Render all per-network resources and interfaces via j2 to enable future support for custom networks via network_data.yaml Note this doesn't enable custom networks for the built-in roles as we skip j2 rendering for them, this will be resolved by converting them to use the generic role template instead of the hard-coded ones listed in the j2_excludes.yaml. Depends-On: I18fa3829ff38ac200550d8e36bbe334c0005da22 Change-Id: I49565f9389f3ec9aef4861e23a3bed64a85501e6 Partially-Implements: blueprint composable-networks
2017-07-05Merge "Allow volumes in puppet_config containers spec"Jenkins1-1/+1
2017-07-04Convert role templates to consume roles_data mapSteven Hardy1-7/+19
Currently we only consume the name with a special-case for the disable constraints boolean, but it will be more flexible if we consume the whole roles_data mapping for each role, so that e.g composable networks and other per-role customizations can be expressed in these templates Partially-Implements: blueprint composable-networks Depends-On: Id1249b78b3dd87e91d572ffa31b7a541f3cde2c7 Change-Id: I355534ec456479944f66106e957404a660d8f2d2
2017-07-03Add ComputeHCI role and related validationsGiulio Fidente1-3/+22
The ComputeHCI role is meant to be a copy of the Compute role except it hosts CephOSD and uses StorageMgmt. Change-Id: Ic8fc5e672361a652ef19199a941c87247ca6925d
2017-06-30Ensure boostrap_host_exec runs as rootMartin André1-0/+17
This is necessary for accessing the bind mounted hieradata in the container in order to determine if the node is the primary node. With the new validation added to yaml-validate.py, we could spot potential issues in sahara-api and keystone bootstrap tasks. The keystone one is a false positive, as the image defaults to the root user in order to be able to run apache. Still, it is better to be consistent here and specify the root user nonetheless. Change-Id: Ib0ff9748d5406f507261e506c19b96750b10e846 Closes-Bug: #1697917
2017-06-30Allow volumes in puppet_config containers specJames Slagle1-1/+1
Mounting host volumes when running containers via puppet_config already works and is supported with docker-puppet.py. However, the validation in yaml-validate.py does not allow it. This patch makes it allowed by the validation. It is sometimes necessary since some puppet modules expect to make persistent file system changes other than just configuration data under /etc. In particular, ironic inspector expects to configure a http and tftp root director with an ipxe configuration. See: https://github.com/openstack/puppet-ironic/blob/master/manifests/inspector.pp These changes would be lost if the value for those directories are not mounted as host volumes. Change-Id: Ie51c653f4c666fbaaef0ea80990e2e61f4b1353b
2017-06-28Add heat parameter for all of config_volume imagesMartin André1-0/+17
This commit consistently defines a heat template parameter in the form of DockerXXXConfigImage where XXX represents the name of the config_volume that is used by docker-puppet. The goal is to mitigate hard to debug errors where the templates would set different defaults for the image docker-puppet.py uses to run, for the same config_volume name. This fixes a couple of inconsistencies on the way. Change-Id: I212020a76622a03521385a6cae4ce73e51ce5b6b Closes-Bug: #1699791
2017-06-27Add validation check for divergent parameter definitionsBen Nemec1-4/+71
Many of our parameters are defined in multiple templates, but currently there is no easy way of checking that all of those definitions match. It can be confusing when a parameter is defined one way in one file and another way in a different file. For example, the NovaWorkers description is: Number of workers for Nova API service. and Number of workers for Nova Placement API service. and Number of workers for Nova Conductor service. Which is it actually? All of them. That one parameter controls the workers for all of the nova services, and its description should reflect that, no matter which template you happen to look at. This change adds a check to yaml-validate.py to catch these sorts of inconsistencies and allow us to eventually prevent new ones from getting into the templates. An exclusion mechanism is included because there are some parameter definitions we probably can't/shouldn't change. In particular, this includes the network cidrs which are defaulted to ipv4 addresses in the ipv4 net-iso templates and ipv6 in the ipv6 templates. It's possible a user would be relying on one of those defaults in their configuration, so if we change it they might break. To get around that, the tool explicitly ignores the default field of those parameters, while still checking the description and type fields so we maintain some sanity. There may be other parameters where this is an issue, but those can be added later as they are found. For the moment any inconsistencies are soft-fails. A failure message will be printed, but the return value will not be affected so we can add the tool without first having to fix every divergent parameter definition in tripleo-heat-templates (and there appear to be plenty). This will allow us to gradually fix the parameters over time, and once that is done we can make this a hard-fail. Change-Id: Ib8b2cb5e610022d2bbcec9f2e2d30d9a7c2be511 Partial-Bug: 1700664
2017-06-19Merge "Support config dir for env generator input files"Jenkins1-3/+10
2017-06-12Support config dir for env generator input filesBen Nemec1-3/+10
We're not going to want to list every single sample environment in a single file, so let's also take a directory and just read every yaml file in it. This commit adds support for that as well as some initial environments to demonstrate its use. Change-Id: If2c608f2a61fc5e16784ab594d23f1fa335e1d3c
2017-06-09Remove duplicate docker/puppet services.yamlSteven Hardy1-4/+2
Move to one common services.yaml not only reduces the duplication, but it should improve performance for the docker/services.yaml case, because we were creating two ResourceChains with $many services which we know can be really slow (especially since we seem to be missing concurrent: true on one) Change-Id: I76f188438bfc6449b152c2861d99738e6eb3c61b
2017-05-15Add role specific information to the service templateSaravanan KR1-1/+2
When a service is enabled on multiple roles, the parameters for the service will be global. This change enables an option to provide role specific parameter to services and other templates. Two new parameters - RoleName and RoleParameters, are added to the service template. RoleName provides the role name of on which the current instance of the service is being applied on. RoleParameters provides the list of parameters which are configured specific to the role in the environment file, like below: parameters_default: # Default value for applied to all roles NovaReservedHostMemory: 2048 ComputeDpdkParameters: # Applied only to ComputeDpdk role NovaReservedHostMemory: 4096 In above sample, the cluster contains 2 roles - Compute, ComputeDpdk. The values of ComputeDpdkParameters will be passed on to the templates as RoleParameters while creating the stack for ComputeDpdk role. The parameter which supports role specific configuration, should find the parameter first in in the RoleParameters list, if not found, then the default (for all roles) should be used. Implements: blueprint tripleo-derive-parameters Change-Id: I72376a803ec6b2ed93903cc0c95a6ffce718b6dc
2017-04-22Merge "Replace six.iteritems() with .items()"Jenkins1-1/+1
2017-04-21Merge "Add network_data.yaml to encapsulate list of networks for j2"Jenkins1-3/+13
2017-04-14Rework DOCKER_PUPPET_CONFIG validate toolBogdan Dobrelya1-7/+11
* Split it to REQUIRED/OPTIONAL * Move puppet_tags to OPTIONAL as it already has a default set of tags that need not to be repeated explicitly. Change-Id: Ib70176f1edf61228771c983b0c3231fb7939a316 Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com>
2017-04-07Replace six.iteritems() with .items()loooosy1-1/+1
1.As mentioned in [1], we should avoid using six.iteritems to achieve iterators. We can use dict.items instead, as it will return iterators in PY3 as well. And dict.items/keys will more readable. 2.In py2, the performance about list should be negligible, see the link [2]. [1] https://wiki.openstack.org/wiki/Python3 [2] http://lists.openstack.org/pipermail/openstack-dev/2015-June/066391.html Change-Id: I7c8f540eced0731f4dfb1dfd045828b5a9bb6c67
2017-03-29Qpid dispatch router composable roleJohn Eckersberg1-1/+3
Note: since it replaces rabbitmq, in order to aim for the smallest amount of changes the service_name is called 'rabbitmq' so all the other services do not need additional logic to use qdr. Depends-On: Idecbbabdd4f06a37ff0cfb34dc23732b1176a608 Change-Id: I27f01d2570fa32de91ffe1991dc873cdf2293dbc
2017-03-20Change kolla_config from required to optional in pep8.Ian Main1-3/+3
We've decided to use volumes for configuration wherever possible. This means moving away from kolla_config blocks in the templates. Update pep8 to reflect this. Change-Id: If1ec40d0e5a515eed35e0cd04711079294f358c3
2017-03-16docker: Add metadata_settings to optional parameters for yaml validateJuan Antonio Osorio Robles1-1/+2
This section will be needed for TLS-everywhere. So it should be added as optional in the yaml-validate. Change-Id: Ic6ea563b6c8e454cb51f640bb5aaa3adda82a5dd
2017-03-13Tasks hook for preparing BM host for deploying containerized servicesJiri Stransky1-1/+1
This implements a host_prep_tasks hook where we can specify Ansible tasks to perform on the host before deploying containerized services. The hook runs in a single step, the assumption is that we will mostly use the hook for creating per-service directories on the host to ensure we are able to mount them into the containers. (We cannot do this operation via Puppet because all containerized services run their Puppet within a config container, so Puppet doesn't have access to host's filesystem.) Change-Id: I7d8bac39e0cd422fd651eefe29f7d10941ab4a1a
2017-03-10Add pep8 tests on docker/services/*Dan Prince1-0/+61
This patch adds the beginning of a set of unit tests for the new docker services templates. This should help us the new interfaces as they evolve. Change-Id: I98a73cf090ebab4593a682f5f34c0950d37e010c
2017-03-05Add network_data.yaml to encapsulate list of networks for j2Steven Hardy1-3/+13
This moves the hard-coded networks from the default environment, and provides the first step towards enabling composable networks. Co-Author: Dan Sneddon <dsneddon@redhat.com> Partial-Bug: #1633090 Depends-On: I9f818912bd8e2a3220e41c8ccbbab3d9063b4d72 Change-Id: I7793b8badede5450b05437c84d9b40c28de7546b
2017-02-28Align hyperconverged-ceph.yaml environment and adds some validationGiulio Fidente1-0/+18
Until bug #1635409 is fixed we'll have to keep the default list of services deployed by hyperconverged-ceph.yaml in sync with the ServicesDefault list provided in roles_data.yaml This change adds some logic in the templates validation script to ensure that is preserved with future updates. Change-Id: Ib767f9a24c3541b16f96bd6b6455cf797113fbd8
2017-02-17Make the DB URIs host-independent for all servicesMichele Baldessari1-5/+3
When fixing LP#1643487 we added ?bind_address to all DB URIs. Since this clashes with Cellsv2 due to the URIs becoming host dependent, we need a new approach to pass bind_address to pymysql that leaves the DB URIs host-independent. In change Iff8bd2d9ee85f7bb1445aa2e1b3cfbff1f397b18 we first create a /etc/my.cnf.d/tripleo.cnf file with a [tripleo] section with the correct bind-address option. In this change we make sure that the DB URIs will point to the added file and to the specific section containing the necessary bind-address option. We do introduce a new MySQLClient profile which will hold all this more client-specific configuration so that this change can fit better in the composable roles work. Also, in the future it might contain the necessary configuration for SSL for example. Note that in case the /etc/my.cnf.d/tripleo.cnf file does not exist (because it is created via the mysqlclient profile), things keep on working as usual and the bind-address option simply won't be set, which has no impact on hosts where there are no VIPs. Co-Authored-By: Damien Ciabrini <dciabrin@redhat.com> Change-Id: Ieac33efe38f32e949fd89545eb1cd8e0fe114a12 Related-Bug: #1643487 Closes-Bug: #1663181 Closes-Bug: #1664524 Depends-On: Iff8bd2d9ee85f7bb1445aa2e1b3cfbff1f397b18
2017-02-07Stop setting bind_address on nova db uri.Oliver Walsh1-1/+4
This reverts the changes in https://review.openstack.org/414629 for nova as they are incompatible with cell_v2. This is a temporary fix for HA while a long-term solution is developed. Change-Id: I79d30a2d76a354999152c0c997ea77f104c51027 Related-bug: #1643487 Closes-bug: #1662344